检索结果-南通市图书馆

同方期刊数据库

Precipitating thermally reinforcement phase in aluminum alloys for enhanced strength at 400℃

在线全文

学校读者我要写书评

暂无评论

Journal of Materials Science & technology 2024年第5期172卷 71-82页

作者： Xiang Su Yuan Lei Yang Chen Hongjie Qu Zhixiang Qi Gong Zheng Xu Liu Henggao Xiang Guang Chen national Key Laboratory of Advanced casting Technologies MIIT Key Laboratory of Advanced Metallic and Intermetallic Materials TechnologyEngineering Research Center of Materials Behavior and DesignMinistry of EducationNanjing University of Science and TechnologyNanjing 210094China School of Aviation and Mechanical engineering Changzhou Institute of TechnologyChangzhou 213032China

Heat-resistant aluminum alloys are widely used in aerospace and automotive fields for manufacturing hot components due to their advantages in lightweight design and energy ***,the high-temperature strength of existing cast aluminum alloys is always limited to about 100 MPa at 350℃due to coarsening and transformation of strengthening ***,we reveal that the yield strength and ultimate tensile strength of the T6 state Al-8.4Cu-2.3Ce-1.0Mn-0.5Ni-0.2Zr alloy at 400◦C increase by 34%and 44%after re-aging at 300℃for 100 h,and its thermal strength exhibits distinguished ad-vantage over traditional heat-resistant aluminum *** enhanced elevated-temperature strength is attributed to the reprecipitation of the Ni-bearing T-Al_(20)Cu_(2)Mn_(3)phase,whose number density increases over one *** significant segregation of Ni,Ce,and Zr elements at the interfaces helps improve the thermal stability of the T *** thermostable T phase effectively strengthens the matrix by in-hibiting dislocation ***,a highly interconnected 3D intermetallic network along the grain boundaries can still remain after long-term re-aging at 300℃,which is conducive to imposing a drag on the grain boundaries at high *** finding offers a viable route for enhancing the elevated-temperature strength of heat-resistant aluminum alloys,which could provide expanded opportunities for higher-temperature applications.

关键词： Aluminum alloys Precipitation Thermally reinforcement phase Re-aging treatment High-temperature strength

Near-field wideband beam training for ELAA with uniform circular array

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Science China(Information Sciences) 2024年第6期67卷 370-383页

作者： Yuhao CHEN Linglong DAI Department of Electronic engineering Tsinghua UniversityBeijing National Research Center for Information Science and Technology (BNRist)

Extremely large-scale antenna array(ELAA) at millimeter wave(mmWave) and Terahertz(THz)band has been considered a key technology for combating high attenuation in high-frequency bands in future6G communications. Uniform circular arrays(UCAs) have attracted much attention because of their ability to provide flat beamforming gain at all angles. To realize efficient beamforming, beam training is widely used to acquire channel state information. However, with a large antenna number, the beam training overhead in ELAA systems becomes overwhelming. Moreover, with a large bandwidth, the beam defocus effect severely degrades beam training accuracy. To address these issues, this paper proposes a frequency-dependent focusing(FDF)-based beam training scheme to realize effective beam training in near-field wideband ELAA systems with UCA. Specifically, we first analyze the FDF property of UCA, where signals at different subcarriers can simultaneously focus on different distances. Then, by exploiting the FDF property to search different distances using different subcarriers simultaneously, we design a hierarchical codebook and propose an FDFbased beam training scheme. To reveal the effectiveness of the proposed scheme, we compare its necessary beam training overhead with that of existing schemes. Finally, the simulation results demonstrate that the proposed scheme can achieve accurate beam training in near-field wideband UCA systems with a low beam training overhead.

关键词： extremely large-scale antenna array (ELAA) uniform circular array (UCA) near-field wideband beam training

同方期刊数据库

Enrichment of anammox biomass during mainstream wastewater treatment driven by achievement of partial denitrification through the addition of bio-carriers

在线全文

学校读者我要写书评

暂无评论

Journal of Environmental Sciences 2024年第3期137卷 181-194页

作者： Yuqing Ma Bo Wang Xiaodi Li Shuo Wang Wen Wang Yongzhen Peng national engineering Laboratory for Advanced Municipal Wastewater Treatment and Reuse technology Engineering Research Center of BeijingBeijing University of TechnologyBeijing 100124China

Anammox is widely considered as the most cost-effective and sustainable process for nitrogen ***,how to achieve the enrichment of anammox biomass remains a challenge for its large-scale application,especially in mainstream wastewater *** this study,the feasibility of enrichment of anammox biomass was explored through the realization of partial denitrification and the addition of *** using ordinary activated sludge,a sequencing batch reactor(SBR)followed by an up-fow anaerobic sludge bed(UASB)was operated at 25±2℃ for 214 *** long-term operation was divided into five phases,in which SBR and UASB were started-up in Phases I and II,*** eliminating oxygen and adjusting the infow ratios in Phases III-V,advanced nitrogen removal was achieved with the effuent total nitrogen being 4.7 mg/L and the nitrogen removal efficiency being 90.5%in Phase *** in-situ and ex-situ activity tests demonstrated the occurrence of partial denitrification and ***,16S rRNA high-throughput sequencing analysis revealed that Candidatus Brocadia was enriched from below the detection limit to in biofilms(0.4%in SBR,2.2%in UASB)and the foc sludge(0.2%in SBR,1.3%in UASB),while Thauera was mainly detected in the foc sludge(8.1%in SBR,8.8%in UASB),which might play a key role in partial ***,this study provides a novel strategy to enrich anammox biomass driven by rapid achievement of partial denitrification through the addition of bio-carriers,which will improve large-scale application of anammox processes in mainstream wastewater treatment.

关键词： Enrichment Anammox biomass Bio-carriers Partial denitrification Mainstream wastewater

Dragonfly Interaction Algorithm for Optimization of Queuing Delay in Industrial Wireless Networks

在线全文

学校读者我要写书评

暂无评论

Journal of Bionic engineering 2024年第1期21卷 447-485页

作者： Sanjay Bhardwaj Da-Hye Kim Dong-Seong Kim Department of IT Convergence engineering ICT Convergence Research CenterKumoh National Institute of TechnologyGumiSouth Korea

In industrial wireless networks,data transmitted from source to destination are highly *** often leads to the queuing of the data,and poor management of the queued data results in excessive delays,increased energy consumption,and packet ***,a nature-inspired-based Dragonfly Interaction Optimization Algorithm(DMOA)is proposed for optimization of the queue delay in industrial wireless *** term“interaction”herein used is the characterization of the“flying movement”of the dragonfly towards damselflies(female dragonflies)for *** a result,interaction is represented as the flow of transmitted data packets,or traffic,from the source to the base *** includes each and every feature of dragonfly movement as well as awareness of the rival dragonflies,predators,and damselflies for the desired optimization of the queue *** features are juxtaposed as noise and interference,which are further used in the calculation of industrial wireless metrics:latency,error rate(reliability),throughput,energy efficiency,and fairness for the optimization of the queue *** analysis,convergence analysis,the Wilcoxon test,the Friedman test,and the classical as well as the 2014 IEEE Congress of Evolutionary Computation(CEC)on the benchmark functions are also used for the evaluation of DMOA in terms of its robustness and *** results demonstrate the robustness of the proposed algorithm for both classical and benchmarking functions of the IEEE CEC ***,the accuracy and efficacy of DMOA were demonstrated by means of the convergence rate,Wilcoxon testing,and ***,fairness using Jain’s index in queue delay optimization in terms of throughput and latency,along with computational complexity,is also evaluated and compared with other *** results show that DMOA exceeds other bio-inspired optimization algorithms in terms of fairness in queue delay management and average packet *** proposed a

关键词： Dragonfly Damselfly Interaction Queuing delay Optimization Industrial wireless networks

Microstructure evolution and strengthening mechanism of high -performance powder metallurgy TA15 titanium alloy by hot rolling

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

International Journal of Minerals,Metallurgy and Materials 2024年第6期31卷 1426-1436页

作者： Ying Gao Ce Zhang Jiazhen Zhang Xin Lu Beijing Advanced Innovation center for Materials Genome engineering State Key Laboratory for Advanced Metals and MaterialsInstitute for Advanced Ma-terials and TechnologyUniversity of Science and Technology BeijingBeijing 100083China national engineering research center for Advanced Rolling technology National Engineering Research Center for Flat Rolling EquipmentInstitute of Engin-eering TechnologyUniversity of Science and Technology BeijingBeijing 100083China

Hot deformation of sintered billets by powder metallurgy(PM)is an effective preparation technique for titanium alloys,which is more significant for high-alloying *** this study,Ti–6.5Al–2Zr–Mo–V(TA15)titanium alloy plates were prepared by cold press-ing sintering combined with high-temperature hot *** microstructure and mechanical properties under different process paramet-ers were *** microscope,electron backscatter diffraction,and others were applied to characterize the microstructure evolution and mechanical properties strengthening *** results showed that the chemical compositions were uniformly dif-fused without segregation during sintering,and the closing of the matrix craters was accelerated by increasing the sintering *** block was hot rolled at 1200℃ with an 80%reduction under only two passes without *** strength and elongation of the plate at 20–25℃ after solution and aging were 1247 MPa and 14.0%,respectively,which were increased by 24.5%and 40.0%,respect-ively,compared with the as-sintered alloy at 1300℃.The microstructure was significantly refined by continuous dynamic recrystalliza-tion,which was completed by the rotation and dislocation absorption of the substructure surrounded by low-angle grain *** hot rolling combined with heat treatment,the strength and plasticity of PM-TA15 were significantly improved,which resulted from the dense,uniform,and fine recrystallization structure and the synergistic effect of multiple slip systems.

关键词： elemental powder powder metallurgy titanium alloy hot rolling strength and plasticity

Exceptional catalytic effect of novel rGO-supported Ni-Nb nanocomposite on the hydrogen storage properties of MgH_(2)

在线全文

学校读者我要写书评

暂无评论

Journal of Materials Science & technology 2024年第5期172卷 83-93页

作者： Samuel Guemou Liuting Zhang Shuai Li Yiqun Jiang Tao Zhong Zichuan Lu Ren Zhou Fuying Wu Qian Li School of Energy and Power Instrumental Analysis CenterJiangsu University of Science and TechnologyZhenjiang 212003China national engineering research center for Magnesium Alloys&national Key Laboratory of Advanced casting Technologies&College of Materials Science and engineering Chongqing UniversityChongqing 400044China Chongqing Institute of New Energy Storage Materials and Equipment Chongqing 401135China Max Planck Institute for Iron research Düsseldorf 40237Germany

The design of an excellent active catalyst to improve the sluggish kinetic and thermodynamic properties of magnesium hydride(MgH_(2))remains a great challenge to achieve its practical *** this study,a novel Ni-Nb/rGO nanocomposite catalyst was successfully prepared by one-spot hydrothermal and sub-sequent calcination *** novel Ni-Nb/rGO nanocomposite exhibits an exceptional catalytic effect on improving MgH_(2) sorption ***,the onset desorption temperature of MgH_(2)+10 wt%Ni-Nb/rGO composite is reduced to 198℃,much lower than that of undoped MgH_(2)(330℃).In-terestingly,the composite can release 5.0,5.9,and 6.0 wt%H_(2) within 10 min at 245,260,and 275℃,***,the dehydrogenated MgH_(2)+10 wt%Ni-Nb/rGO composite starts to absorb hydrogen even at room temperature with approximate 2.75 wt%H_(2) uptake at 75℃under 3 MPa H_(2) pressure within 30 min and exhibits excellent stability by maintaining 6.0 wt%hydrogen content after 20 cycles at 300℃.Chou’s model suggests that the de/hydrogenation kinetics of Ni-Nb/rGO-modified MgH_(2) switches from surface penetration model to diffusion model at lower ***,the ac-tivation energies(E a)for the de/hydrogenation of MgH_(2)+10 wt%Ni-Nb/rGO are reduced to 57.8 kJ/mol and 33.9 kJ/mol,which are significantly lower than those of undoped MgH_(2).The work demonstrates that the addition of a novel ternary Ni-Nb/rGO catalyst is an effective strategy to not only boost the sorption kinetics of MgH_(2) but also maintain its cycling property.

关键词： Hydrogen storage materials Magnesium hydride Ni-Nb/rGO Kinetic analysis Catalytic mechanism

Effect of post rolling stress on phase transformation behavior of microalloyed dual phase steel

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Journal of Iron and Steel research(International) 2024年第3期31卷 688-699页

作者： Wen-quan Sun Sheng-yi Yong Tie-heng Yuan Ting-song Yang An-rui He Chao Liu Rui-chun Guo national engineering research center for Advanced Rolling and Intelligent Manufacturing University of Science and Technology BeijingBeijing 100083China

The slow phase transformation of microalloyed dual phase steel makes the nonuniform stress and temperature fields during the post rolling cooling process have a significant impact on the phase transformation *** the relatively slow phase transformation of DP780 steel within the microalloyed dual phase steel series,the influence of stress on the phase transformation behavior of DP780 steel was *** quantify the nonuniform thermal and stress conditions in the steel coil,a thermo-mechanical coupled finite element model of the hot-rolled strip cooling process was *** on the simulation data,DP780 steel was chosen as the research material,and Gleeble 3500 thermal simulation equipment was used for experimental *** thermal expansion curves were analyzed through regression to establish the dynamic model of DP780 steel phase transformation under ***,metallographic analysis was conducted to determine phase transformation type and grain size of DP780 *** results confirmed that the stress promotes the occurrence of semi-diffusion-type bainite ***,an appropriate level of stress facilitates the growth of bainitic grains,while the increased stress inhibits the growth of ferritic grains.

关键词： Microalloyed dual phase steel Stress Bainitic transformation Grain Finite element method

Dual-Defect engineering Strategy Enables High-Durability Rechargeable Magnesium-Metal Batteries

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Nano-Micro Letters 2024年第9期16卷 449-461页

作者： Fuyu Chen Bai‑Qing Zhao Kaifeng Huang Xiu‑Fen Ma Hong‑Yi Li Xie Zhang Jiang Diao Jili Yue Guangsheng Huang Jingfeng Wang Fusheng Pan national Innovation center for Lndustry‑Education Integration of Energy Storage technology School of Materials Science and EngineeringChongqing UniversityChongqing 400044People’s Republic of China national Magnesium Alloy Material engineering technology research center Chongqing UniversityChongqing 400044People’s Republic of China Materials and Energy Division Beijing Computational Science Research CenterBeijing 100193People’s Republic of China School of Materials Science and engineering Northwestern Polytechnical UniversityXi’an 710072People’s Republic of China national Key Laboratory of Advanced casting Technologies Chongqing UniversityChongqing 400044People’s Republic of China

Rechargeable magnesium-metal batteries(RMMBs)are promising next-generation secondary batteries;however,their development is inhibited by the low capacity and short cycle lifespan of *** various strategies have been devised to enhance the Mg^(2+)migration kinetics and structural stability of cathodes,they fail to improve electronic conductivity,rendering the cathodes incompatible with magnesium-metal ***,we propose a dual-defect engineering strategy,namely,the incorporation of Mg^(2+)pre-intercalation defect(P-Mgd)and oxygen defect(Od),to simultaneously improve the Mg^(2+)migration kinetics,structural stability,and electronic conductivity of the cathodes of *** lamellar V_(2)O_(5)·nH_(2)O as a demo cathode material,we prepare a cathode comprising Mg_(0.07)V_(2)O_(5)·1.4H_(2)O nanobelts composited with reduced graphene oxide(MVOH/rGO)with P-Mgd and *** Od enlarges interlayer spacing,accelerates Mg^(2+)migration kinetics,and prevents structural collapse,while the P-Mgd stabilizes the lamellar structure and increases electronic ***,the MVOH/rGO cathode exhibits a high capacity of 197 mAh g^(−1),and the developed Mg foil//MVOH/rGO full cell demonstrates an incredible lifespan of 850 cycles at 0.1 A g^(−1),capable of powering a light-emitting *** proposed dual-defect engineering strategy provides new insights into developing high-durability,high-capacity cathodes,advancing the practical application of RMMBs,and other new secondary batteries.

关键词： Rechargeable magnesium-metal batteries Dual-defect engineering Vanadium-based cathode High durability Lamellar structure

Influence of syngas components and ash particles on the radiative heat transfer in a radiant syngas cooler

在线全文

学校读者我要写书评

暂无评论

Chinese Journal of Chemical engineering 2024年第4期68卷 203-215页

作者： Chen Han Youmin Situ Huaxing Zhu Jianliang Xu Zhenghua Dai Guangsuo Yu Haifeng Liu national Energy Coal Gasification technology research and Development center East China University of Science and TechnologyShanghai 200237China Shanghai engineering research center of Coal Gasification East China University of Science and TechnologyShanghai 200237China

Radiant syngas cooler(RSC)is widely used as a waste heat recovery equipment in industrial *** this work,an RSC with radiation screens is established and the impact of gaseous radiative property models,gas components,and ash particles on heat transfer is investigated by the numerical simulation *** the syngas components and the pressure environment of the RSC,a modified weighted-sum-of-gray-gases model was *** modified model shows high accuracy in *** computational fluid dynamics simulation,the calculated steam production is only 0.63%in error with the industrial *** with Smith's model,the temperature decay along the axial direction calculated by the modified model is *** components are of great significance to heat recovery capacity,especially when the absorbing gas fraction is less than 10%.After considering the influence of particles,the outlet temperature and the proportion of radiative heat transfer are less affected,but the difference in steam output reaches 2.7 t·h^(-1).The particle deposition on the wall greatly reduces the heat recovery performance of an RSC.

关键词： Radiant syngas cooler Weighted-sum-of-gray-gases model Numerical simulation Particle radiation