检索结果-南通市图书馆

Tuning heterogeneous microstructures to enhance mechanical properties of nano-TiN particle reinforced Haynes 230 composites by laser powder bed fusion

引用

Rare Metals 2024年第9期43卷 4548-4565页

作者： Wen-Jie Liu Hui Li Qian-Xing Yin He-Jun Du School of Power and Mechanical engineering Wuhan University The institute of technological Sciences Wuhan University School of Mechanical&Aerospace engineering Nanyang Technological University

Laser powder bed fusion(LPBF) is considered to be one of the most promising additive manufacturing technologies for producing components with geometries and high geometrical precision that are unattainable by traditional technologies. The superalloy exhibits exceptional mechanical and high-temperature performances,rendering it a prime candidate for advanced aero-engine applications. Despite the high demand for LPBF-manufactured superalloys, the superalloy is one of the materials manufactured difficultly by LPBF due to their large laser absorptivity fluctuation, poor molten pool stability and sharp temperature gradient. Hence, superalloys are characterized by severe pores, undesirable coarse columnar grains and poor mechanical properties. In this work, the effect of nano-Ti N particles on defects, molten pool characteristics and microstructure and performance of the composites were investigated. The 4.5 wt% Ti N/Haynes230 samples exhibited exceptional nanohardness and elastic modulus with maximum values reaching 5.53 GPa and 240.03 GPa, respectively. These superior mechanical properties were attributed to the combined effects of spatter and gas pore inhibition, grain refinement and duplex nanophases strengthening. Moreover, the stability of molten pool was enhanced, and spatter was effectively suppressed by adding nano-Ti N particles, while grain refinement and columnar to equiaxed transitions were promoted. Furthermore, the matrix exhibited a high dislocation density due to a significant hindrance of dislocation movement caused by massive nano-phases(e.g., Ti N and M23C6), resulting in the formation of extensive dislocation tangles and *** work offers novel insights into the role of nanoparticles reinforced superalloy composites by LPBF.

关键词： Composites Laser powder bed fusion Mechanical properties Microstructure Molten pool characteristics

来源：

同方期刊数据库评论

在线全文

同方期刊数据库

学校读者我要写书评

暂无评论

Global output feedback regulation of time-varying nonlinear systems via the dual-gain method

引用

Science China(Information Sciences) 2024年第5期67卷 333-334页

作者： Xian-Long YIN Zong-Yao SUN Changyun WEN institute of Automation Qufu Normal University School of Electrical and Electronic engineering Nanyang Technological University

Notably, owing to the limited information available, the problem of output feedback stabilization/regulation for nonlinear systems has been explored based on state *** addition, the sensors accounting for state measurement could fail to detect the system states accurately due to the limitations of manufacturing techniques and instruments.

关键词：

来源：

同方期刊数据库评论

在线全文

同方期刊数据库

学校读者我要写书评

暂无评论

Dynamic multifunctional metasurfaces:an inverse design deep learning approach

引用

Photonics Research 2024年第1期12卷 123-133页

作者： ZHI-DAN LEI YI-DUO XU CHENG LEI YAN ZHAO DU WANG The institute of technological Sciences Wuhan UniversityWuhan 430072China College of Materials Science and engineering Sichuan UniversityChengdu 610065China

Optical metasurfaces(OMs)offer unprecedented control over electromagnetic waves,enabling advanced optical *** emergence of deep learning has opened new avenues for designing ***,existing deep learning methods for OMs primarily focus on forward design,which limits their design capabilities,lacks global optimization,and relies on prior ***,most OMs are static,with fixed functionalities once *** overcome these limitations,we propose an inverse design deep learning method for dynamic *** approach comprises a forward prediction network and an inverse retrieval *** forward prediction network establishes a mapping between meta-unit structure parameters and reflectance *** inverse retrieval network generates a library of meta-unit structure parameters based on target requirements,enabling end-to-end design of *** incorporating the dynamic tunability of the phase change material Sb2Te3with inverse design deep learning,we achieve the design and verification of dynamic multifunctional *** results demonstrate OMs with multiple information channels and encryption capabilities that can realize multiple physical field optical modulation *** Sb2Te3is in the amorphous state,near-field nano-printing based on meta-unit amplitude modulation is achieved for X-polarized incident light,while holographic imaging based on meta-unit phase modulation is realized for circularly polarized *** the crystalline state,the encrypted information remains secure even with the correct polarization input,achieving double *** research points towards ultra-compact,high-capacity,and highly secure information storage approaches.

关键词： polarization inverse approach

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Direct recycling of Li-ion batteries from cell to pack level:Challenges and prospects on technology,scalability,sustainability,and economics

引用

Carbon Energy 2024年第6期6卷 1-39页

作者： Joseph Jegan Roy Do Minh Phuong Vivek Verma Richa Chaudhary Michael Carboni Daniel Meyer Bin Cao Madhavi Srinivasan Energy Research institute@NTU(ERI@N) SCARCE LaboratoryNanyang Technological UniversitySingaporeSingapore School of Materials Science and engineering Nanyang Technological UniversitySingaporeSingapore CEA CNRSENSCMUniversity of MontpellierUMR 5257(ICSM)Bagnols-sur-Cèze CedexFrance School of Civil and Environmental engineering Nanyang Technological UniversitySingaporeSingapore

Direct recycling is a novel approach to overcoming the drawbacks of conventional lithium-ion battery(LIB)recycling processes and has gained considerable attention from the academic and industrial sectors in recent *** primary objective of directly recycling LIBs is to efficiently recover and restore the active electrode materials and other components in the solid phase while retaining electrochemical *** technology's advantages over traditional pyrometallurgy and hydrometallurgy are costeffectiveness,energy efficiency,and sustainability,and it preserves the material structure and morphology and can shorten the overall recycling *** review extensively discusses the advancements in the direct recycling of LIBs,including battery sorting,pretreatment processes,separation of cathode and anode materials,and regeneration and quality enhancement of electrode *** encompasses various approaches to successfully regenerate high-value electrode materials and streamlining the recovery process without compromising their electrochemical ***,we highlight key challenges in direct recycling when scaled from lab to industries in four perspectives:(1)battery design,(2)disassembling,(3)electrode delamination,and(4)commercialization and *** on these challenges and changing market trends,a few strategies are discussed to aid direct recycling efforts,such as binders,electrolyte selection,and alternative battery designs;and recent transitions and technological advancements in the battery industry are presented.

关键词： battery design cathode regeneration direct recycling graphite recycling lithium-ion battery,scaling-up

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Oligopeptide Self-Assembly:Mechanisms,Stimuli-Responsiveness,and Biomedical Applications

引用

CCS Chemistry 2024年第1期6卷 69-90页

作者： Lei Ge Hanyan Xu Xin Jiang Jing Yu School of Materials Science and engineering Nanyang Technological UniversitySingapore 637553 institute for Digital Molecular Analytics and Science Nanyang Technological UniversitySingapore 637553

Oligopeptide self-assembly materials have emerged as a promising class of biomaterials with diverse applications in *** review highlights the recent progress in comprehending the selfassembly mechanisms intrinsic to oligopeptides and their behavior in response to specific *** methodically structuring the amino acid sequence and managing external stimuli such as pH levels,redox conditions,or enzymatic activity,we can exercise unprecedented control over the self-assembly *** controlling the self-assembly process of oligopeptides,various structures with extraordinary versatility can be obtained,including micelles,nanofibers,and coacervate droplets,each possessing modifiable mechanical and chemical ***,these self-assembled constructs demonstrate immense potential within varied biomedical *** stimuli-sensitive nature of oligopeptide assembly materials facilitates timely encapsulation and release of therapeutic cargos,consequently eliciting desired cellular *** approach paves the way for more precise tumor targeting,personalized medicinal treatments,and well-regulated drug *** innate biocompatibility and proficiency in replicating the extracellular matrix(ECM)render them ideally suited for applications such as tissue engineering,wound remediation,and regenerative *** summary,oligopeptide self-assembling materials show tremendous potential as adaptable platforms for cutting-edge biomedical applications,thereby bridging the divide between fundamental research and practical clinical application.

关键词： oligopeptides self-assembly nonequilibrium stimuli-responsive behavior biomedical applications

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Investigations of methane adsorption characteristics on marine-continental transitional shales and gas storage capacity models considering pore evolution

引用

Petroleum Science 2024年第4期21卷 2273-2286页

作者： Chen-Gang Lu Xian-Ming Xiao Zhen-Qian Xue Zhang-Xin Chen Yin-Tao Dong Yue Feng Gang Li School of Energy Resources China University of Geosciences (Beijing) School of Civil and Environmental engineering Nanyang Technological University Chemical and Petroleum engineering University of Calgary Eastern institute of Technology (tentative) CNOOC Research institute

Methane adsorption is a critical assessment of the gas storage capacity(GSC) of shales with geological conditions. Although the related research of marine shales has been well-illustrated, the methane adsorption of marine-continental transitional(MCT) shales is still ambiguous. In this study, a method of combining experimental data with analytical models was used to investigate the methane adsorption characteristics and GSC of MCT shales collected from the Qinshui Basin, China. The Ono-Kondo model was used to fit the adsorption data to obtain the adsorption parameters. Subsequently, the geological model of GSC based on pore evolution was constructed using a representative shale sample with a total organic carbon(TOC) content of 1.71%, and the effects of reservoir pressure coefficient and water saturation on GSC were explored. In experimental results, compared to the composition of the MCT shale, the pore structure dominates the methane adsorption, and meanwhile, the maturity mainly governs the pore structure. Besides, maturity in the middle-eastern region of the Qinshui Basin shows a strong positive correlation with burial depth. The two parameters, micropore pore volume and non-micropore surface area, induce a good fit for the adsorption capacity data of the shale. In simulation results, the depth,pressure coefficient, and water saturation of the shale all affect the GSC. It demonstrates a promising shale gas potential of the MCT shale in a deeper block, especially with low water saturation. Specifically,the economic feasibility of shale gas could be a major consideration for the shale with a depth of 60% in the Yushe-Wuxiang area. This study provides a valuable reference for the reservoir evaluation and favorable block search of MCT shale gas.

关键词： High-pressure methane adsorption Marine-continental transitional shale gas Ono-Kondo model Adsorption thermodynamics Gas storage capacity model

来源：

同方期刊数据库评论

在线全文

同方期刊数据库

学校读者我要写书评

暂无评论

Multiple Nanoparticles Coupling Strategy for Enhancing Optical Filter Performance of Spectral Splitter Used in Photovoltaic/Thermal System

引用

Journal of Thermal Science 2024年第1期33卷 368-382页

作者： LIANG Huaxu HUANG Xin WANG Fuqiang CHENG Ziming DONG Yan School of Energy Science and engineering Harbin Institute of TechnologyHarbin 150001China School of New Energy Harbin Institute of Technology at WeihaiWeihai 264209China School of Materials Science and engineering Nanyang Technological UniversitySingapore 639798Singapore

Selective absorptive nanofluid can pre-absorb certain sunlight wavelength that cannot be used by PV and transmits remaining sunlight to the surface of PV,which can decouple PV from the thermal receiver *** order to improve the harvesting of electricity and high-temperature thermal nanofluid,it is important to design an optimal optical filter window(transmit sunlight with wavelengths of 732-1067 nm to the surface of the photovoltaic cell and absorb the remaining sunlight).However,designing optimal optical filter is facing following challenges:(1) inherently narrow selective absorptivity property of single nanoparticle;(2) simplified numerical calculation method calculating transmittance;(3) ignoring the shape of the *** this study,the idea of using multiple nanoparticles coupling effect to design an optical filter is proposed,which can superimpose the narrow absorption bandwidth of different nanoparticles to obtain a wide absorption bandwidth of the whole *** addition,an improved transmission method considering light-matter interaction at air/vessel and liquid/vessel interfaces is adopted to compute the *** results calculated by improved transmission method are more accurate than widely used traditional Lambert-Beer law,which is verified by experimental ***,the effect of nanoparticle shape on spectral transmittance is also investigated,which shows that spiny Ag can approximately extend absorbance from 400 nm to 600 nm compared to nanosphere ***,the results show that optical filter efficiency of nanofluids with multiple nanoparticles coupling(Ag,spiny Ag,ZnO,ITO) can reached up to 35%.

关键词： solar energy PV/T nanofluid optimal optical filter radiative transfer spectral splitting

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Interaction of edge dislocations with voids in tungsten

引用

Tungsten 2024年第3期6卷 633-646页

作者： Arseny Kazakov Rita I.Babicheva Aleksandr Zinovev Dmitry Terentyev Kun Zhou Elena A.Korznikova Sergey V.Dmitriev Research Laboratory for Metals and Alloys under Extreme Impacts Ufa University of Science and Technology institute for Metals Superplasticity Problems of RAS School of Mechanical and Aerospace engineering Nanyang Technological University institute for Nuclear Energy Technology Belgian Nuclear Research Center technological Machines and Equipment Department Ufa State Petroleum Technological University institute of Mechanical Science Problems of RAS institute of Molecule and Crystal Physics UFRC of Russian Academy of Sciences

Tungsten is widely used as a material capable of withstanding extreme operating conditions and is one of the candidates for use in fusion and Generation Ⅳ fission *** modelling implemented to solve various material science problems is an indispensable approach for improving material *** work analyzes the interaction of an edge dislocation with a void in single-crystal tungsten with the help of molecular dynamics *** different approaches for studying the dynamics of dislocations in tungsten that differ in boundary conditions are *** interactions of the dislocation and void at different temperatures are investigated,and based on the obtained stress-strain curves,the dislocation obstacle strength for voids having various diameters is *** is shown that when applied to a crystal with small voids,the model with the fixed boundary conditions returns incorrect ***,the influence of the cell size for the model with periodic boundary conditions is analyzed,and the case of a non-central interaction of a dislocation with a void is *** obtained results improve our understanding of the mechanical response of irradiated materials.

关键词： Tungsten Molecular dynamics method Dislocations Voids Boundary conditions

来源：

同方期刊数据库评论

在线全文

同方期刊数据库

学校读者我要写书评

暂无评论

Leflunomide: A versatile additive for defect reduction, enhanced optoelectronic properties and environmental stability of perovskite films

引用

Nano Research 2024年第4期17卷 2628-2637页

作者： Dingyue Sun Ming Peng Taijin Wang Longju Yi Shizuo Zhang Feng Liu Gary J.Cheng The institute of technological Sciences Wuhan UniversityWuhan 430072China School of Power and Mechanical engineering Wuhan UniversityWuhan 430072China School of Industrial engineering Purdue UniversityWest LafayetteIN 47906USA

The development of perovskite photoelectric devices with excellent performance is largely dependent on the defects in the perovskite *** address this issue,a specific drug,leflunomide(LF,C_(12)H_(9)F_(3)N_(2)O_(2)),was incorporated into the perovskite to reduce defects and improve its photoelectric *** is believed that the C=O bond on LF molecule can interact with the uncoordinated Pb2+of the perovskite,thereby reducing non-radiative *** novel approach of incorporating LF into perovskite films has the potential to revolutionize the development of high-performance perovskite photoelectric *** trifluoromethyl functional(–CF_(3))group on LF can form a protective layer on the surface of the perovskite film,shielding it from water ***,LF can be utilized to alter the nucleation position of perovskite,thus minimizing the number of defects and optimizing the film ***,the LF-doped perovskite film displays low trap density and high photoelectric *** LF-doped perovskite film showed a trap density of 8.28×10^(11),which is notably lower than the 2.04×10^(12) of the perovskite film without *** responsivity and detectivity of the LF-doped perovskite photodetector were 0.771 A/W and 2.81×10^(11) Jones,respectively,which are much higher than the 0.23 A/W and 1.06×10^(10) Jones of the LF-undoped perovskite ***,the LF-doped photodetector maintained an initial photocurrent of 86%after 30 days of storage in air,indicating drastically increased environmental *** strongly suggests that LF is an effective additive for perovskites utilized in optoelectronic devices with high performance.

关键词： leflunomide additive engineering defect passivation perovskite

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Temperature field characteristics of CF/PEEK thermoplastic composites formed by automated fiber placement using hot gas torch with slit structure nozzle

引用

Chinese Journal of Aeronautics 2024年第6期37卷 392-409页

作者： Ziang JIN Shouzheng SUN Sunil Chandrakant JOSHI Zhenyu HAN Hongya FU State Key Laboratory of Robotics and System Harbin Institute of TechnologyHarbin 150001China School of Mechanical and Aerospace engineering Nanyang Technological UniversitySingapore 639798Singapore

In-situ consolidation forming of high-performance thermoplastic composites by Automated Fiber Placement(AFP)is of significant interest in *** the laying process,the heating temperature has a great influence on the quality of the formed components.A threedimensional heat transfer finite element model of Carbon Fiber(CF)/Polyether Ether Ketone(PEEK)heated by Slit Structure Nozzle Hot Gas Torch(SSNHGT)assisted AFP is *** influence of gas flow rate,heat transfer distance,and laying speed on heating temperature is *** results show that the overall temperature increases and then decreases as the gas flow rate *** the increase in heat transfer distance and laying speed,the overall temperature ***,the gas flow rate has the greatest influence on the temperature of CF/PEEK being heated,followed by the laying speed and finally the heat transfer ***,the model can also be extended to other fiber-reinforced polymer composites formed by hot gas torch assisted AFP,which can guide the optimization of process parameters for subsequent heating temperature control.

关键词： Fiber reinforced plastics Thermoplastics Heating temperature Automated fiber placement CF/PEEK

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

欢迎您,

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

请选择保存的检索档案：

请选择收藏分类：

通借通还

欢迎您,

建议与咨询 留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

请选择保存的检索档案： 新增检索档案 确定 取消

请选择收藏分类： 新增自定义分类 确定 取消

通借通还

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

请选择保存的检索档案：

请选择收藏分类：