检索结果-南通市图书馆

Low-temperature synthesis of Sm-Fe binary compounds by reduction-diffusion process using an eutectic salt solvent

在线全文

学校读者我要写书评

暂无评论

Rare Metals 2023年第5期42卷 1724-1731页

作者： Jungryang Kim Shusuke Okada Kenta Takagi Magnetic Powder Metallurgy Research Center National Institute of Advanced Industrial Science and Technology(AIST)NagoyaAichi463-8560Japan

In this study,the temperature of the low-temperature reduction-diffusion(LTRD)process was successfully decreased to below 600℃by introducing LiClKCl eutectic molten salt with a low eutectic point(352℃)as a solvent for Ca ***,the Sm-Fe binary compounds,which were synthesizable at previously-unexplored low temperatures by the LTRD process using LiCl-KCl eutectic molten salt,were investigated,including whether a new metastable or ThMn_(12)-type Sm-Fe binary phase was *** Sm-Fe phase transitions of the SmFe binary compounds at a low temperature were identified,and it was found that MgCu_(2)-type Sm-Fe,PuNi_(3)-type SmFe and TbCu_(7)-type Sm-Fe phases were synthesized and stable at 400,500 and 550℃*** no new metastable Sm-Fe and ThMn_(12)-type Sm-Fe compounds were discovered in this study,this work can demonstrate that it is possible to synthesize the Sm-Fe phase at very low temperatures by the LTRD process for the first time.

关键词： Low-temperature synthesis Reductiondiffusion process Molten salts Hard magnet Sm-Fe compounds

Influence of Dietary Fiber on the Bioavailability of Zinc in Rats

在线全文

学校读者我要写书评

暂无评论

Biomedical and Environmental Sciences 1996年第2期9卷 204-208页

作者： HIROMICHIKONDO AZUMIOSADA DepartmentofHomeEconomics KinjoGakuinUniversity463OmoriMoriyamaNagoyaJapan DepartmentofHomeEconom

Young male albino rats were fed ad libitum semipurined diet supplemented with or without 5% of purified dietary fiber (cellulose, agar-agar, pectin, chitin or chitosan) for 31 days. Each test diet was carefully prepared in order to contain zinc at the level of 8 ppm from zinc *** rats fed diets containing 5% of dietary fiber except chitosan, fbod consumption was higher than the control. The body weight gain of rats fed diets containing cellulose, pectin or chitin was higher than the control. However, food intake and body weight gain of rats fed the diet containing 5% of chitosan were definitely lower than not only the other fiber including diet groups but also the control *** dietary fiber was added at 5% level to diet, zinc absorption was not changed to a considerable degree. But, the apparent zinc absorption of rats fed the agar-agar diet was 70%. On the other hand, zinc absorption in the pectin diet group was about 10% higher than the *** total amount of zinc in tibia or femur of rats fed non-fiber diets was a little higher than that of rats fed fiber diets

关键词：膳食纤维大鼠锌生物有效性

Processing of commercial magnesium alloys by different-speeds-rolling technique

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

中国有色金属学会会刊：英文版 2005年第S2期15卷 284-287页

作者：董尚利 T. Imai N. Saito I. Shigemastu School of Materials Science and Engineering Harbin Institute of Technology Harbin 150001 ChinaNational Institute of Advanced Industrial Science & Technology Nagoya 463-8560 Japan) National Institute of Advanced Industrial Science & Technology Nagoya 463-8560 Japan

The commercial pure magnesium, AZ31 and AM60 alloys have been processed by a different-speeds-rolling (DSR) technique in order to estimate the possibility of producing high performance magnesium sheets by severe plastic deformation process. The experiment was carried out on a mill of which the rotation speed ratio of the upper roll to the lower roll could be varied from 1 to 1.364. Temperature of the two rolls of the mill could also be automatically controlled from room temperature to 300℃. The started billets with thickness of 10mm were cut from the cast ingot. The rolling parameters such as preheating temperature of the billet, rolling reduction per pass, rotation speed ratio and temperature of the rolls were carefully designed depending on the processed magnesium alloy. Mechanical properties of the successfully rolled sheets with final thickness of about 1mm were characterized, corresponding to microstructure development during the DSR-processing. The potential application of DSR to processing of magnesium alloys was discussed.

关键词： magnesium rolling severe plastic processing microstructure mechanical properties

Nanotwin-assisted nitridation of quenched FeNi alloy nanopowders for rare-earth-free magnets

在线全文

学校读者我要写书评

暂无评论

Journal of Materials Science & Technology 2023年第34期165卷 244-252页

作者： Jian Wang Yusuke Hirayama Kazuyuki Suzuki Kwangjae Park Zheng Liu Kenta Takagi Kimihiro Ozaki Innovative Functional Materials Research Institute National Institute of Advanced Industrial Science and Technology4-205SakurazakaMoriyamaNagoya463-8560Japan

L1_(0)-ordered FeNi alloy with a high uniaxial magnetic anisotropy and large magnetic moment is a promising candidate for rare-earth-free permanent magnets ***,the synthesis of this chemically ordered phase remains a longstanding challenge because of its low chemical order-disorder transition temperature(200-320℃).Although a non-equilibrium synthetic route based on a nitrogen topotactic reaction has been proposed as a valid approach,the volume fraction and degree of chemical ordering of the product phase are ***,we propose a promising approach that promotes the efficient formation of L1_(0)-ordered nitride phase in FeNi nanopowders by introducing a quenching treatment during a low-oxygen induction thermal plasma *** quenched FeNi nanopowders possessed much smaller powder sizes(40.4 vs 74.0 nm),exhibited higher number densities of nanotwins(39.8%vs 24.1%)and formed much larger volume fraction(33.6 wt.%vs 0.6 wt.%)of ordered phase than the unquenched ***,quenching-induced high-density nanotwins led to the dominant coverage of serrated{001}crystal facets over the surfaces of the FeNi *** unique features substantially accelerated the formation of the L1_(0)-ordered nitride phase in the FeNi nanopowders because the{001}crystallographic orientation had the highest nitrogen *** work provides not only a valid synthetic approach for mass production of the L10-ordered nitride phase in FeNi nanopowders but also novel insights into the crystal-defect-assisted nitridation of nanomaterials.

关键词： Rare-earth-free Permanent magnet FeNi Nitridation Nanotwin

Mechanism of reduction-diffusion reaction in Sm-Fe binary system at low temperature using molten salts

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Journal of Rare Earths 2024年第10期42卷 1889-1894页

作者： Jungryang Kim Shusuke Okada Kenta Takagi Kimihiro Ozaki Innovative Functional Materials Research Institute National Institute of Advanced Industrial Science and Technology(AIST)4-205 SakurazakaMoriyamakuNagoya463-8560AichiJapan

In this study,the mechanism of the reduction-diffusion reaction in a Sm-Fe binary system at low temperature was studied to investigate the possibility of synthesis of a Fe-rich TbCu_(7)-type SmFe_(x)(x>9)by the low-temperature diffusion-reduction(LTRD)process using LiCl-KCl eutectic molten ***,the Sm-Fe phase transformation depending on the Sm-Fe composition,the LTRD temperature,and time was investigated,and it is found that the obtained metastable phase is only TbCu_(7)-type SmFe_(~8.5),which is not a Fe-rich *** Fe content does not change even after an expended LTRD process,and the metastable TbCu_(7)-type SmFe_(~8.5)tends to transform to the stable Sm_(2)Fe_(17)*** addition,it is found that the Sm-Fe phase starts to synthesize from the Sm-rich phase in the order of SmFe_(2),SmFe_(3),and SmFe_(8.5)as the LTRD temperature increases(when the time was 10 h)or the LTRD time increases(when the temperature was 550℃).Core-shell-like particles are observed in the case of a short LTRD time,and the core and the shell are Fe and the Sm-rich Sm-Fe phase,respectively,indicating that the Sm-rich phase begins to produce on the surface of the Fe *** is difficult to synthesize a Fe-rich TbCu_(7)-type SmFe_(x)(x>9)phase with the Sm-Fe binary system,suggesting that a different approach,such as addition of other elements,will be necessary.

关键词： Low-temperature synthesis Synthesis mechanism Reduction-diffusion process Molten salts Sm-Fe compounds Rare earths

Effect of bending and tension deformation on the texture evolution and stretch formability of Mg-Zn-RE-Zr alloy

在线全文

学校读者我要写书评

暂无评论

International Journal of Minerals,Metallurgy and Materials 2022年第7期29卷 1334-1342页

作者： Yuya Ishiguro Xinsheng Huang Yuhki Tsukada Toshiyuki Koyama Yasumasa Chino Department of Materials Design Innovation Engineering Nagoya UniversityFuro-choChikusa-kuNagoya464-8603Japan Multi-Material Research Institute National Institute of Advanced Industrial Science and Technology2266-98AnagahoraSimo-shidami Moriyama-kuNagoya463-8560Japan

Bending and tension deformations were performed on Mg-1.3 wt%Zn-0.2 wt%RE-0.3 wt%Zr(ZEK100)alloy sheets that initially had a transverse direction(TD)-split *** effects of bending and tension deformations on the texture formation and room-temperature formability of specimens were *** specimen subjected to 3-pass bending and tension deformations exhibited an excellent Erichsen value of 9.6 ***,the Erichsen value deterioration was observed in the specimen subjected to 7-pass *** rolling direction-split texture developed on the surface with an increasing pass number of ***,the clear TD-split texture remained at the central *** a result,a quadrupole texture was macroscopically developed with an increasing pass number of *** reduction in anisotropy by the formation of the quadrupole texture is suggested to be the main reason for the improvement in stretch *** contrast,the generation of coarse grains near the surface is suggested to be the direct cause for the deterioration of the stretch formability of the specimen subjected to 7-pass deformations.

关键词： magnesium alloy texture stretch formability bending and tension deformation mechanical properties

Novel synthesis of single-crystalline TbCu_(7)-type Sm-Fe powder by low-temperature reduction-diffusion process using molten salt

在线全文

学校读者我要写书评

暂无评论

Journal of Rare Earths 2022年第7期40卷 1126-1133页

作者： Shusuke Okada Kenta Takagi Magnetic Powder Metallurgy Research Center National Institute of Advanced Industrial Science and Technology(AIST)2266-98 AnagahoraShimoshidami MoriyamaNagoya463-8560Japan

In this study,molten salt was used as a solvent for calcium(Ca)to let a reduction-diffusion(R-D)reaction occur below the melting point of Ca(1115 K),which is the lower limit temperature of the co nventional RD *** the R-D reaction is conducted below 923 K with LiCl molten salt,submicron-sized TbCu_(7)-type Sm-Fe powder is *** c/a ratio of the powder estimated by a synchrotron X-ray diffraction pattern is 0.8456,which is consistent with the Sm_(0.67)Fe_(5.667)(SmFe_(8.5))*** electron backscatter diffraction analysis reveals that single-crystalline TbCu_(7)-type SmFe_(8.5) powder was synthesized for the first time.

关键词： Reduction-diffusion TbCu_(7) Molten salt Permanent magnet Rare earths

Corrosion behavior of hypereutectic Al-23%Si alloy (AC9A) processed by severe plastic deformation

在线全文

学校读者我要写书评

暂无评论

Transactions of Nonferrous Metals Society of China 2010年第2期20卷 195-200页

作者：江静华马爱斌宋丹 N. SAITO 袁玉春 Y. NISHIDA College of Materials Science and Engineering Hohai University Nanjing 210098 China National Institute of Advanced Industrial Science and Technology 2266-98 Anagahora Shimoshidami Moriyama-ku Nagoya 463-8560 Japan

Ultrafine-grained(UFG) hypereutectic Al-23%Si (mass fraction) alloy was achieved through equal-channel angular pressing(EACP) procedure. And the electrochemical properties after various ECAP passes were investigated in neutral NaCl solution. Potentiostatic polarization curves show that the corrosion potential of the ECAPed sample after 4 passes decreases markedly, while the corrosion current density reaches 1.37 times that of the as-cast alloy. However, the φcorr and Jcorr values after 16 passes are improved and approach those of the as-cast alloy. Immersion tests also show that the mass-loss ratio of ECAPed alloy decreases with increasing the pressing pass, which is lowered to 28.7% with the increase of pass number from 4 to 16. Pitting susceptibility of the ECAPed alloy after initial 4 passes is boosted, due to the presence of biggish voids resulted from the breakage of brittle large primary silicon crystals during ECAP. Increasing ECAP pass makes the voids evanesce and results in the homogeneous ultrafine-grained structure, contributing to a higher pitting resistance. These results indicate that enough ECAP passes are beneficial to increasing corrosion resistance of the hypereutectic Al-23%Si alloy.

关键词： aluminum casting alloys ECAP corrosion behavior ultrafine grained microstructure

Establishment of induced pluripotent stem cells from aged mice using bone marrow-derived myeloid cells

在线全文

学校读者我要写书评

暂无评论

Journal of Molecular Cell Biology 2011年第2期3卷 91-98页

作者： Zhao Cheng Sachiko Ito Naomi Nishio Hengyi Xiao Rong Zhang Haruhiko Suzuki Yayoi Okawa Toyoaki Murohara Ken-ichi Isobe Department of Immunology Nagoya University Graduate School of Medicine65 Turumai-choShowa-kuNagoyaAichi 466-8520Japan Laboratory for Geriatrics State Key Laboratory of BiotherapySichuan UniversityChengdu 610041China Department of Functioning Activation National Institute for Longevity SciencesNational Center for Geriatrics GerontologyAichi 463-0003Japan Department of Cardiology Nagoya University Graduate School of Medicine65 Turumai-choShowa-kuNagoyaAichi 466-8520Japan

If induced pluripotent stem(iPS)cells are to be used to treat damaged tissues or repair organs in elderly patients,it will be necessary to establish iPS cells from their *** determine the feasibility of using this technology with elderly patients,we asked if it was indeed possible to establish iPS cells from the bone marrow(BM)of aged *** cells from aged C57BL/6 mice carrying the green fluorescence protein(GFP)gene were cultured with granulocyte macrophage-colony stimulating factor(GM-CSF)for 4 *** factors(Oct3/4,Sox2,Klf4 and c-Myc)were introduced into the BM-derived myeloid(BM-M)*** efficiency of generating iPS cells from aged BM cultured in GM-CSF was ***,we succeeded in obtaining BM-M-iPS cells from aged C57BL/6 mice,which carried *** BM-M-iPS cells expressed SSEA-1 and Pou5f1 and were positive for alkaline phosphatase *** iPS cells did make teratoma with three germ layers following injection into syngeneic C57BL/6 mice,and can be differentiated to three germ layers in *** co-culturing with OP9,the BM-M-iPS cells can be differentiated to the myeloid *** differentiated BM-M-iPS cells proliferated well in the presence of GM-CSF,and lost expression of Nanog and Pou5f1,at least in part,due to methylation of their *** the contrary,Tnf and Il1b gene expression was upregulated and their promoters were hypomethylated.

关键词： induced pluripotent stem cells aged mouse bone marrow myeloid cells gene expression methylation ChIP assay