检索结果-南通市图书馆

Fluid Dynamics & Materials Processing 2024年第8期20卷 1915-1924页

作者： Guochen Xu Taizhou oil production plant Sinopec East China Oil and Gas CompanyTaizhou225300China

Microscopic pore structure in continental shale oil reservoirs is characterized by small pore throats and complex *** adsorption behavior of hydrocarbons on the pore walls exhibits unique physical and chemical ***,studying the adsorption morphology of hydrocarbon components in nanometer-sized pores and clarifying the exploitation limits of shale oil at the microscopic level are of great practical significance for the efficient development of continental shale *** this study,molecular dynamics simulations were employed to investigate the adsorption characteristics of various single-component shale oils in inorganic quartz fissures,and the influence of pore size and shale oil hydrocarbon composition on the adsorption properties in the pores was *** results show that different molecules have different adsorption capacities in shale oil pores,with lighter hydrocarbon components(C6H14)exhibiting stronger adsorption *** the same adsorbed molecule,the adsorption amount linearly increases with the increase in pore diameter,but larger pores contribute more to shale oil *** shale pores,the thickness of the adsorption layer formed by shale oil molecules ranges from 0.4 to 0.5 nm,which is similar to the width of alkane *** oil in the adsorbed state that is difficult to be exploited is mainly concentrated in the first adsorption *** them,the volume fraction of adsorbed shale oil in 6 nm shale pores is 40.8%,while the volume fraction of shale oil that is difficult to be exploited is 16.2%.

关键词： Shale oil utilization limit micro adsorption molecular dynamics simulation

Microscopic characteristics of tight sandstone reservoirs and their effects on the imbibition efficiency of fracturing fluids:A case study of the Linxing area,Ordos Basin

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Energy Geoscience 2024年第3期5卷 328-338页

作者： Qihui Li Dazhong Ren Hu Wang Haipeng Sun Tian Li Hanpeng Zhang Zhen Yan Rongjun Zhang Le Qu Engineering Research Center of Development and Management for Low to Ultra-Low Permeability oil&Gas Reservoirs in West China(Ministry of Education) College of Petroleum EngineeringXi'an Shiyou UniversityXi'anShaanxi710065China no.6 Gas production plant PetroChina Changqing Oilfield CompanyYan‘anShaanxi716000China No.4 oil production plant PetroChina Changqing Oilfield CompanyXi'anShaanxi710021China Engineering Technology Branch CNOOC Energy Development Co.Ltd.Tianjin300452China Xi'an Key Laboratory of Tight oil(Shale oil)Development Xi‘an Shiyou UniversityXi'anShaanxi710065China

The Linxing area within the Ordos Basin exhibits pronounced reservoir heterogeneity and intricate micro-pore structures,rendering it susceptible to water-blocking damage during imbibition *** study delved into the traits of tight sandstone reservoirs in the 8th member of the Shihezi Formation(also referred to as the He 8 Member)in the study area,as well as their effects on fracturing fluid *** experimental techniques such as nuclear magnetic resonance(NMR),high-pressure mercury intrusion(HPMI),and gas adsorption,this study elucidated the reservoir characteristics and examined the factors affecting the imbibition through imbibition *** findings reveal that:①The reservoir,with average porosity of 8.40%and average permeability of 0.642×10^(-3)μm^(2),consists principally of quartz,feldspar,and lithic fragments,with feldspathic litharenite serving as the primary rock type and illite as the chief clay mineral;②Nano-scale micro-pores and throats dominate the reservoir,with dissolution pores and intercrystalline pores serving as predominant pore types,exhibiting relatively high pore connectivity;③Imbibition efficiency is influenced by petrophysical properties,clay mineral content,and microscopic pore *** to the heterogeneity of the tight sandstone reservoir,microscopic factors have a more significant impact on the imbibition efficiency of fracturing fluids;④A comparative analysis shows that average pore size correlates most strongly with imbibition efficiency,followed by petrophysical properties and clay mineral *** contrast,the pore type has minimal *** are vital in the imbibition process,while meso-pores and macro-pores offer primary spaces for *** study offers theoretical insights and guidance for enhancing the post-fracturing production of tight sandstone reservoirs by examining the effects of these factors on the imbibition efficiency of fracturing fluids in tight sandstones.

关键词： Tight sandstone Ordos Basin Fracturing fluid Microscopic reservoir characteristics Imbibition efficiency Influencing factor

Prediction Model of Wax Deposition Rate in Waxy Crude oil Pipelines by Elman Neural Network Based on Improved Reptile Search Algorithm

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Energy Engineering 2024年第4期121卷 1007-1026页

作者： Zhuo Chen Ningning Wang Wenbo Jin Dui Li The Second oil production plant Sinopec Northwest Oilfield CompanyUrumqi830011China Yingmaili oil and Gas production Management Area PetroChina Tarim Oilfield CompanyKorla841001China College of Petroleum Engineering Xi’an Shiyou UniversityXi’an710065China

A hard problem that hinders the movement of waxy crude oil is wax deposition in oil *** ensure the safe operation of crude oil pipelines,an accurate model must be developed to predict the rate of wax deposition in crude oil *** at the shortcomings of the ENN prediction model,which easily falls into the local minimum value and weak generalization ability in the implementation process,an optimized ENN prediction model based on the IRSA is *** validity of the new model was confirmed by the accurate prediction of two sets of experimental data on wax deposition in crude oil *** two groups of crude oil wax deposition rate case prediction results showed that the average absolute percentage errors of IRSA-ENN prediction models is 0.5476% and 0.7831%,***,it shows a higher prediction accuracy compared to the ENN prediction *** fact,the new model established by using the IRSA to optimize ENN can optimize the initial weights and thresholds in the prediction process,which can overcome the shortcomings of the ENN prediction model,such as weak generalization ability and tendency to fall into the local minimum value,so that it has the advantages of strong implementation and high prediction accuracy.

关键词： Waxy crude oil wax deposition rate chaotic map improved reptile search algorithm Elman neural network prediction accuracy

Differences in and factors controlling organic matter enrichment in the Ziliujing Formation shale in the Sichuan Basin

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Petroleum Science 2024年第1期21卷 77-86页

作者： Peng Li Zhong-Bao Liu He Bi Tao Jiang Rui-Kang Bian Peng-Wei Wang Xiao-Yu Shang State Key Laboratory of Shale oil and Gas Enrichment Mechanisms and Efficient Development Beijing102206China Key Laboratory of Shale oil/Gas Exploration and production Technology SINOPECBeijing102206China Petroleum Exploration and production Research Institute SINOPECBeijing102206China Research Institute of Petroleum Exploration and Development PetroChinaBeijing100083China Chinese Academy of Geological Sciences Beijing100037China No.4 oil production plant in Daqing oilfield Co Ltd. Daqing163511HeilongjiangChina

Lacustrine shale oil and gas are important fields for unconventional exploration and development in China,and organic-rich shale deposition lays down the critical foundation for hydrocarbon *** are two sets of shale,the Dongyuemiao and Da’anzhai Members,in the Ziliujing Formation in the Sichuan *** identify the differential enrichment characteristics of organic matter and clarify its controlling factors,geochemical analyses of organic and inorganic geochemical analyses were *** results showed that the total organic carbon content of the Dongyuemiao shale(1.36%)is slightly higher than that of the Da’anzhai shale(0.95%).The enrichment of organic matter in the two shales resulted from the comprehensive controls of paleoproductivity,paleoenvironment,and terrigenous input,but different factors have different *** addition,driven by climate,the change in the sulfate concentration in the bottom water further led to the different intensities of bacterial sulfate reduction in early *** made a great difference regarding organic matter accumulation in the two *** general,climate may have played a dominant role in organic matter enrichment in the two sets of shale.

关键词： Lacustrine shale Ziliujing Formation Sichuan Basin Enrichment mechanism of organic matter

Gas-Water production of a Continental Tight-Sandstone Gas Reservoir under Different Fracturing Conditions

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Fluid Dynamics & Materials Processing 2024年第6期20卷 1165-1180页

作者： Yan Liu Tianli Sun Bencheng Wang Yan Feng Southwest oil and Gas Company SINOPECChengdu610041China The Second Gas production plant of Southwest Branch SINOPECNanchong637455China

A numerical model of hydraulic fracture propagation is introduced for a representative reservoir(Yuanba continental tight sandstone gas reservoir in Northeast Sichuan).Different parameters are considered,i.e.,the interlayer stress difference,the fracturing discharge rate and the fracturing fluid *** results show that these factors affect the gas and water production by influencing the fracture *** interlayer stress difference can effectively control the fracture *** greater the stress difference,the smaller the dimensionless reconstruction volume of the reservoir,while the flowback rate and gas production are lower.A large displacement fracturing construction increases the fracture-forming efficiency and expands the fracture *** larger the displacement of fracturing construction,the larger the dimensionless reconstruction volume of the reservoir,and the higher the fracture-forming efficiency of fracturing fluid,the flowback rate,and the gas *** viscosity fracturing fluid is suitable for long fractures,while high viscosity fracturing fluid is suitable for wide *** an increase in the fracturing fluid viscosity,the dimensionless reconstruction volume and flowback rate of the reservoir display a non-monotonic behavior,however,their changes are relatively small.

关键词： Tight sandstone gas reservoir fracture propagation flowback rate gas production law water production law influencing factor

Remaining oil distribution characteristics in an oil reservoir with ultra-high water-cut

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Energy Geoscience 2024年第1期5卷 219-223页

作者： Hongmin Yu Youqi Wang Li Zhang Qingxin Zhang Zhenhai Guo Benzhe Wang Tao Sun SINOPEC Petroleum Exploration and Development Research Institute Beijing100083China Shengli oil production plant SINOPEC Shengli Oilfield BranchDongyingShandong257051China

An accurate mapping and understanding of remaining oil distribution is very important for water control and stabilize oil production of mature oilfields in ultra-high water-cut ***,the Tuo-21 Fault Block of the Shengtuo oilfield has entered the stage of ultra-high water cut(97.2%).Poor adaptability of the well pattern,ineffective water injection cycle and low efficiency of engineering measures(such as workover,re-perforation and utilization of high-capacity pumps)are the significant problems in the ultra-high water-cut *** order to accurately describe the oil and water flow characteristics,relative permeability curves at high water injection multiple(injected pore volume)and a semiquantitative method is applied to perform fine reservoir simulation of the Sand group 3e7 in the *** accurate reservoir model is built and history matching is *** distribution characteristics of remaining oil in lateral and vertical directions are quantitatively simulated and *** results show that the numerical simulation considering relative permeability at high injection multiple can reflect truly the remaining oil distribution characteristics after water flooding in an ultrahigh water-cut *** distribution of remaining oil saturation can be mapped more accurately and quantitatively by using the‘four-points and five-types’classification method,providing a basis for potential tapping of various remaining oil types of oil reservoirs in late-stage of development with high water-cut.

关键词： Ultra-high water-cut High water injection multiple Four-points and five-types Numerical simulation Remaining oil distribution

Research on the solid particle erosion wear of pipe steel for hydraulic fracturing based on experiments and numerical simulations

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Petroleum Science 2024年第4期21卷 2779-2792页

作者： Si-Qi Yang Jian-Chun Fan Ming-Tao Liu De-Ning Li Jun-Liang Li Li-Hong Han Jian-Jun Wang Shang-Yu Yang Si-Wei Dai Lai-Bin Zhang State Key Laboratory of oil and Gas Equipment CNPC Tubular Goods Research Institute Key Laboratory of oil and Gas Safety and Emergency Technology China University of Petroleum oil production Technology Research Institute of Liaohe oilfield Company Tianjin Gas Storage Branch PetroChina Dagang Oilfield Company Petroleum production Engineering Research Institute Daqing Oilfield Company

Erosion wear is a common failure mode in the oil and gas industry. In the hydraulic fracturing, the fracturing pipes are not only in high-pressure working environment, but also suffer from the impact of the high-speed solid particles in the fracturing fluid. Beneath such complex conditions, the vulnerable components of the pipe system are prone to perforation or even burst accidents, which has become one of the most serious risks at the fracturing site. Unfortunately, it is not yet fully understood the erosion mechanism of pipe steel for hydraulic fracturing. Therefore, this article provides a detailed analysis of the erosion behavior of fracturing pipes under complex working conditions based on experiments and numerical simulations. Firstly, we conducted erosion experiments on AISI 4135 steel for fracturing pipes to investigate the erosion characteristics of the material. The effects of impact angle, flow velocity and applied stress on erosion wear were comprehensively considered. Then a particle impact dynamic model of erosion wear was developed based on the experimental parameters, and the evolution process of particle erosion under different impact angles, impact velocities and applied stress was analyzed. By combining the erosion characteristics, the micro-structure of the eroded area, and the micro-mechanics of erosion damage, the erosion mechanism of pipe steel under fracturing conditions was studied in detail for the first time. Under high-pressure operating conditions, it was demonstrated through experiments and numerical simulations that the size of the micro-defects in the eroded area increased as the applied stress increased, resulting in more severe erosion wear of fracturing pipes.

关键词： Erosion wear Applied stress Particle impact dynamics Erosion mechanism

Prediction on Failure Pressure of Pipeline Containing Corrosion Defects Based on ISSA-BPNNModel

同方期刊数据库评论

在线全文

同方期刊数据库

学校读者我要写书评

暂无评论

Energy Engineering 2024年第3期121卷 821-834页

作者： Qi Zhuang Dong Liu Zhuo Chen PetroChina Changqing oilfield Company The Second Gas Production PlantXi’an710000China PetroChina Changqing oilfield Company Safety and Environmental Supervision Department Co.Ltd.Xi’an710000China Sinopec Northwest oilfield Company The Second Oil Production Plant Co.Ltd.Urumqi830016China

oil and gas pipelines are affected by many factors,such as pipe wall thinning and pipeline *** prediction of failure pressure of oil and gas pipelines can provide technical support for pipeline safety *** at the shortcomings of the BP Neural Network(BPNN)model,such as low learning efficiency,sensitivity to initial weights,and easy falling into a local optimal state,an Improved Sparrow Search Algorithm(ISSA)is adopted to optimize the initial weights and thresholds of BPNN,and an ISSA-BPNN failure pressure prediction model for corroded pipelines is *** 61 sets of pipelines blasting test data as an example,the prediction model was built and predicted by MATLAB software,and compared with the BPNN model,GA-BPNN model,and SSA-BPNN *** results show that the MAPE of the ISSA-BPNN model is 3.4177%,and the R2 is 0.9880,both of which are superior to its comparison *** the ISSA-BPNN model has high prediction accuracy and stability,and can provide support for pipeline inspection and maintenance.

关键词： oil and gas pipeline corrosion defect failure pressure prediction sparrow search algorithm BP neural network logistic chaotic map

A phase-field model for simulating the propagation behavior of mixed-mode cracks during the hydraulic fracturing process in fractured reservoirs

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Applied Mathematics and Mechanics(English Edition) 2024年第5期45卷 911-930页

作者： Dan ZHANG Liangping YI Zhaozhong YANG Jingqiang ZHANG Gang CHEN Ruoyu YANG Xiaogang LI State Key Laboratory of oil and Gas Reservoir Geology and Exploitation Southwest Petroleum UniversityChengdu 610500China State Key Laboratory of oil and Gas Reservoir Geology and Exploitation Chengdu University of TechnologyChengdu 610059China Tarim oilfield Company PetroChinaBayingolin Mongolian Autonomous Prefecture 841000Xinjiang Uygur Autonomous RegionChina Wuqi oil production plant Shaanxi Yanchang PetroleumXi'an 716000China Exploration Division of PetroChina Southwest oil and Gasfield Company Chengdu 610041China

A novel phase-field model for the propagation of mixed-mode hydraulic fractures,characterized by the formation of mixed-mode fractures due to the interactions between fluids and solids,is *** this model,the driving force for the phase field consists of both tensile and shear components,with the fluid contribution primarily manifesting in the tension driving *** displacement and pressure are solved simultaneously by an implicit *** numerical solution's iterative format is established by the finite element discretization and Newton-Raphson(NR)iterative *** correctness of the model is verified through the uniaxial compression physical experiments on fluid-pressurized rocks,and the limitations of the hydraulic fracture expansion phase-field model,which only considers mode I fractures,are *** addition,the influence of matrix mode II fracture toughness value,natural fracture mode II toughness value,and fracturing fluid injection rate on the hydraulic fracture propagation in porous media with natural fractures is studied.

关键词： mixed-mode crack hydraulic fracturing poro-elasticity phase-field method(PFM)

A New Distribution Method for Wet Steam Injection Optimization

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Fluid Dynamics & Materials Processing 2024年第1期20卷 109-126页

作者： Jingjing Gao Xingkai Zhang Hubei Key Laboratory of oil and Gas Drilling and production Engineering Yangtze UniversityWuhan434000China

A new approach and a new related distribution system are proposed to address the issue of uneven steam injection caused by the different suction capacities of the used wells during the application of steam“stimulation”methods for enhanced oil *** new distribution system consists of a swirler,spiral dividing baffles,and critical flow *** simulations are used to analyze the flow-field and degree of steam homogeneity obtained with such an *** results indicate that a higher inlet pressure leads to better ***,the internal flow field becomes more stable,and the deviation from an even distribution reduces to±4.0%even when the resistance of each branch is ***,field tests have yielded satisfactory results.

关键词： Cyclical steam stimulation homogeneous distribution gas-liquid two-phase flow critical flow nozzle