检索结果-南通市图书馆

Study on the green extraction of corncob xylan by deep eutectic solvent

Grain & Oil Science and Technology 2024年第1期7卷 50-59页

作者： Bingyu Jiao Le Wang Haitao Gui Zifu Ni Rong Du Yuansen Hu School of Biological engineering National Engineering Research Center of Wheat and Corn Further ProcessingZhengzhou 450001China

Corn as one of the world's major food crops,its by-product corn cob is also rich in ***,the unreasonable utilization of corn cob often causes the environmental pollution,waste of resources and other *** one of the most abundant polymers in nature,xylan is widely used in food,medicine,materials and other *** cob is rich in xylan,which is an ideal raw material for extracting ***,the intractable lignin is covalently linked to xylan,which increases the difficulty of xylan *** has been reported that the deep eutectic solvent(DES)could preferentially dissolve lignin in biomass,thereby dissolving the ***,the xylan in the extract was separated by ethanol precipitation *** xylan precipitate was obtained after centrifugation,while the supernatant was *** components of the supernatant after ethanol precipitation were separated by the rotary *** ethanol,water and DES were collected for the subsequent extraction of corn cob *** this study,a novel way was provided for the green production of corn cob *** DES was used to extract xylan from corn cob which was used as the raw *** effects of solid-liquid ratio,reaction time,reaction temperature and water content of DES on the extraction rate of corn cob xylan were investigated by the single factor ***,the orthogonal test was designed to optimize the xylan extraction *** structure of corn cob xylan was analyzed and *** results showed that the optimum extraction conditions of corn cob xylan were as follows:the ratio of corn cob to DES was 1:15(g:mL),the extraction time was 3 h,the extraction temperature was 60℃,and the water content of DES was 70%.Under these conditions,the extraction rate of xylan was 16.46%.The extracted corn cob xylan was distinctive triple helix of polysaccharide,which was similar to the structure of commercially available *** was effectively and workably extracted from corn

关键词： Corncob Deep eutectic solvent Xylan Process optimization Extraction

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Nanosize-effect on the distribution of heavy metals in copper smelting dust:Based on sophisticated dust sorting approach

引用

Nano research 2024年第1期17卷 312-320页

作者： Ken Li Zuwu Liao Hengdi Ye Qingzhu Li Fenghua Shen Qian Li Hui Liu Qingwei Wang Xu Yan Zhang Lin Liyuan Chai School of Metallurgy and Environment Central South UniversityChangsha 410083China Chinese National engineering research center for Control&Treatment of Heavy Metal Pollution Changsha 410083China National engineering research center of Sintering and Pelletizing Equipment System Zhongye Changtian International Engineering Co.LtdChangsha 410205China

Dust particles emitted from smelters can be hazardous to ecosystems and humans,as they are often enriched in metallic ***,we combined multi-method mineralogical analysis with a sophisticated size sorting approach for copper smelting dust to study the nanosize-effect on heavy metal distribution,which has hitherto been *** types of dust were collected from a copper flash smelter and then size-sorted using a Dekati low-pressure *** showed that all three samples could easily sort out nanoscale dust particles(<1μm,grades 10–2)and even those smaller than 100 nm(grades 5–2).Especially for electrostatic precipitators dust,the mass fraction of nanoscale dust(<1μm)could reach 10.71%.The presence of heavy metals(Pb,Zn,Cu,and As)and their mineral species in dust was examined at various particle *** was discovered that different heavy metals are enriched on nanoparticles in specific *** micron-sized particles,heavy metals are generally found in discrete phases(e.g.,CuSO_(4),PbSO_(4),and As_(2)O_(3)).In nanoscale particles,the dominant phase is Fe_(3)O_(4),while heavy metals are mostly found in lattice substitution(e.g.,CuFe_(2)O_(4)and ZnFe_(2)O_(4)).Two distinct nano-dust morphologies were found:One with irregular mesh or chain structures consisting of particles of a few nanometers,and the other with polygonal crystals in larger sizes of hundreds of *** enrichment of heavy metals in the latter morphology is more pronounced,possibly because lattice substitution of heavy metals is more likely to occur when polycrystalline particles are formed.

关键词： copper flue dust size-sorted heavy metal distribution morphology nano-sized effects

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Current progress of research on heat -resistant Mg alloys: A review

引用

International Journal of Minerals,Metallurgy and Materials 2024年第6期31卷 1406-1425页

作者： Hong Yang Wenlong Xie Jiangfeng Song Zhihua Dong Yuyang Gao Bin Jiang Fusheng Pan National engineering research center for Magnesium Alloys Chongqing UniversityChongqing 400044China College of Materials Science and engineering Chongqing UniversityChongqing 400044China

With the increasing attention received by lightweight metals,numerous essential fields have increased requirements for mag-nesium(Mg)alloys with good room-temperature and high-temperature mechanical ***,the high-temperature mechanic-al properties of commonly used commercial Mg alloys,such as AZ91D,deteriorate considerably with increasing *** the past several decades,extensive efforts have been devoted to developing heat-resistant Mg *** approaches either inhibit the gen-eration of thermally unstable phases or promote the formation of thermally stable precipitates/phases in matrices through solid solution or precipitation *** this review,numerous studies are systematically introduced and *** alloy systems,includ-ing those based on Mg–Al,Mg–Zn,and Mg–rare earth,are carefully classified and compared to reveal their mechanical properties and strengthening *** emphasis,limitations,and future prospects of these heat-resistant Mg alloys are also pointed out and dis-cussed to develop heat-resistant Mg alloys and broaden their potential application areas in the future.

关键词： magnesium alloys mechanical properties heat resistance microstructures high temperatures strengthening mechanisms

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

How Does Stacking Pressure Affect the Performance of Solid Electrolytes and All-Solid-State Lithium Metal Batteries?

引用

Energy & Environmental Materials 2024年第4期7卷 93-98页

作者： Junwu Sang Bin Tang Yong Qiu Yongzheng Fang Kecheng Pan Zhen Zhou Interdisciplinary research center for Sustainable Energy Science and engineering (IRC4SE2) School of Chemical Engineering Zhengzhou University

All-solid-state lithium metal batteries (ASSLMBs) with solid electrolytes (SEs)have emerged as a promising alternative to liquid electrolyte-based Li-ion batteries due to their higher energy density and ***,since ASSLMBs lack the wetting properties of liquid electrolytes,they require stacking pressure to prevent contact loss between electrodes and SEs.

关键词： critical current density solid electrolyte solid-state lithium metal batteries stacking pressure

来源：

同方期刊数据库评论

在线全文

同方期刊数据库

学校读者我要写书评

暂无评论

Optimal Stochastic Scheduling Strategy of Multi-vector Energy Complex Integrated with Full-blown Power-to-biomethane Model

引用

Journal of Modern Power Systems and Clean Energy 2024年第3期12卷 863-873页

作者： Guanwei Zeng Chengxi Liu Minfang Liao Yongjian Luo Xuzhu Dong Hubei engineering and Technology research center for AC/DC Intelligent Distribution Network WuhanChina the School of Electrical engineering and Automation Wuhan UniversityWuhanChina

We propose an optimal stochastic scheduling strategy for a multi-vector energy complex(MEC),considering a fullblown model of the power-to-biomethane(Pt M)*** conventional optimization that uses a simple efficiency coefficient to coarsely model energy conversion between electricity and biomethane,a detailed Pt M model is introduced to emphasize the reactor kinetics and chemical equilibria of *** model crystallizes the interactions between the Pt M process and MEC flexibility,allowing to adjust the operating condition of the methanation reactor for optimal MEC operation in stochastic *** optimization and flowsheet design of the Pt M process increase the average selectivity of methane(i.e.,ratio between net biomethane production and hydrogen consumption)up to 83.7%in the proposed synthesis *** results can provide information and predictions to operators about the optimal operating conditions of a Pt M unit while improving the MEC flexibility.

关键词： Multi-vector energy complex optimal stochastic scheduling power-to-biomethane unit process synthesis natural gas

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Operando investigation of particle re-entrainment mechanism in electrostatic capture process on the lab-on-a-chip

引用

Journal of Environmental Sciences 2024年第2期136卷 337-347页

作者： Yong Zhu Yikun Zhang Xiaoyong Yang Shanlong Tao Mingxia Chen Wenfeng Shangguan research center for Combustion and Environmental Technology School of Mechanical EngineeringShanghai Jiao Tong UniversityShanghai 200240China

Inhalable particle is a harmful air pollutant that causes a significant threat to people's health and ecological environments,which should be removed to purify air,but there exists limited removal efficiency due to particle ***,Operando observation system based on microscopic visualization method is developed to make in situ test of particle migration,deposition and re-entrainment characteristics on a lab-on-a-chip to achieve the investigation in micro-level *** deposition evolution of charged particles is recorded in electric field region intuitively,which confirms the fracture of particle chain occurs during the growth process of deposited *** captures the instantaneous process that a larger particle with micron size due to the coagulation of submicron particles fractures from main body of the particle chain for the first *** analysis of migration behavior of a single submicron particle near electrode surface demonstrates the direct influence of drag force on the fracture of particle *** work is the first-time visualization of dynamic process and mechanism elucidation of particle re-entrainment at the micron level,and the findings will provide the theory support for the particle re-entrainment mechanism and bring inspires of enhancing capture efficiency of inhalable particle.

关键词： Inhalable particle Re-entrainment mechanism Operando observation Lab-on-a-chip Capture efficiency

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Effect of post rolling stress on phase transformation behavior of microalloyed dual phase steel

引用

Journal of Iron and Steel research International 2024年第3期31卷 688-699页

作者： Wen-quan Sun Sheng-yi Yong Tie-heng Yuan Ting-song Yang An-rui He Chao Liu Rui-chun Guo National engineering research center for Advanced Rolling and Intelligent Manufacturing University of Science and Technology BeijingBeijing 100083China

The slow phase transformation of microalloyed dual phase steel makes the nonuniform stress and temperature fields during the post rolling cooling process have a significant impact on the phase transformation *** the relatively slow phase transformation of DP780 steel within the microalloyed dual phase steel series,the influence of stress on the phase transformation behavior of DP780 steel was *** quantify the nonuniform thermal and stress conditions in the steel coil,a thermo-mechanical coupled finite element model of the hot-rolled strip cooling process was *** on the simulation data,DP780 steel was chosen as the research material,and Gleeble 3500 thermal simulation equipment was used for experimental *** thermal expansion curves were analyzed through regression to establish the dynamic model of DP780 steel phase transformation under ***,metallographic analysis was conducted to determine phase transformation type and grain size of DP780 *** results confirmed that the stress promotes the occurrence of semi-diffusion-type bainite ***,an appropriate level of stress facilitates the growth of bainitic grains,while the increased stress inhibits the growth of ferritic grains.

关键词： Microalloyed dual phase steel Stress Bainitic transformation Grain Finite element method

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Prediction of Ground State Configurations and Electrochemical Properties of Li_(3)InCl_(6) Doped with F, Br, and Ga

引用

Chinese Physics Letters 2024年第5期41卷 171-176页

作者：鲁征宇陈乐添胡绪陈素雅张旭周震 Department of Materials Science and engineering Nankai UniversityTianjin 300350China Interdisciplinary research center for Sustainable Energy Science and engineering School of Chemical EngineeringZhengzhou UniversityZhengzhou 450001China

Compared with conventional solid-state electrolytes, halide solid-state electrolytes have several advantages such as a wider electrochemical window, better compatibility with oxide cathode materials, improved air stability,and easier preparation conditions making them conductive to industrial production. We concentrate on a typical halide solid-state electrolyte, Li_(3)InCl_(6), predict the most stable structure after doping with Br, F, and Ga by using the Alloy Theoretic Automated Toolkit based on first-principles calculations, and verify the accuracy of the prediction model. To investigate the potential of three equivalently doped ground state configurations of Li_(3)InCl_(6) as solid-state electrolytes for all-solid-state lithium-ion batteries, their specific properties such as crystal structure,band gap, convex packing energy, electrochemical stability window, and lithium-ion conductivity are computationally analyzed using first-principles calculations. After a comprehensive evaluation, it is determined that the F-doped ground state configuration Li_(3)InCl_(2.5)F_(3.5) exhibits better thermal stability, wider electrochemical stability window, and better lithium ion conductivity(1.80 m S·cm^(-1) at room temperature). Therefore, Li_(3)InCl_(2.5)F_(3.5) has the potential to be used in the field of all-solid-state lithium-ion batteries as a new type of halide electrolyte.

关键词： lithium stability electrolyte

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

A review on surface coating strategies for anti-hygroscopic of high energy oxidizer ammonium dinitramide

引用

Defence Technology（防务技术） 2024年第3期33卷 237-269页

作者： Hongyu Yang Fuyao Chen Yiwen Hu Qiangqiang Lu Lei Xiao Yinglei Wang Fengqi Zhao Wei Jiang Gazi Hao National Special Superfine Powder engineering research center of China School of Chemistry and Chemical EngineeringNanjing University of Science and TechnologyNanjing 210094China Xi’an Modern Chemistry research Institute Xi’an 710065China

Ammonium dinitramide(ADN),which has the advantages of high energy density,no halogen and low characteristic signal,is not only considered as a new high-energy oxidizer that is expected to replace the traditional oxidizer ammonium perchlorate(AP)in solid propellants,but also a good performance explosive in ***,due to the strong hygroscopicity of ADN,its application in solid propellants and explosives is greatly *** the hygroscopicity of ADN is the key to realize the wide application of *** this paper,we systematically review the research progress of anti-hygroscopic strategies of ADN *** surface coating methods are focusing on solvent volatilization,solvent-non-solvent,melt crystallization and atomic layer deposition *** characteristics of the different methods are compared and analyzed,and the basis for the classification and selection of the coating materials are introduced in *** addition,the feasibility of material for surface coating of ADN is evaluated by several compatibility analysis *** is highly expected that the liquid phase method(solvent volatilization method,solvent-non-solvent method)would be the promising method for future ADN coating because of its effective,safety and facile ***,polymer materials,are the preferred coating materials due to their high viscosity,easy adhesion,good anti-hygroscopic effect,and heat resistance,which make ADN weak hygroscopicity,less sensitive,easier to preserve and good compatibility.

关键词： Ammonium dinitramide(ADN) Energetic materials Anti-hygroscopic Surface coating Compatibility analysis

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Gradient microstructure and superior strength-ductility synergy of AZ61 magnesium alloy bars processed by radial forging with different deformation temperatures

引用

Journal of Materials Science & Technology 2024年第3期170卷 65-77页

作者： Jingfeng Zou Lifeng Ma Yanchun Zhu Ling Qin Yuan Yuan School of Mechanical engineering Taiyuan University of Science and TechnologyTaiyuan 030024China Heavy Machinery engineering research center of the Ministry Education Taiyuan University of Science and TechnologyTaiyuan 030024China Department of engineering University of HullCottingham RdHull HU67RXUK National engineering research center for Magnesium Alloys Chongqing UniversityChongqing 400044China

Gradient microstructure modification is a cost-efficient strategy for high strength without compromising ductility,which is urgently needed in the fundamental science of engineering *** this study,heterogeneous structures of AZ61 alloy bars with anisotropic gradients(with different grain size distributions from the surface to the center)were observed to exhibit strong strength-ductility synergies under different deformation tem *** results reveal that the grain refinement process under mediumlow temperature deformation conditions(≤350℃)consists of four transition stages along the radial direction,i.e.,twin activations and deformation band formations,dislocation cells and pile-ups,ultrafine sub-grains,and randomly orientated quasi-micron *** deformation temperatures have a great influence on twin activations and deformation band formations,and the high temperature can easily provoke the initiation of non-basal *** deformation bands were determined as a primary nucleation site due to their highly unstable dislocation hindrance *** in combination with the Radial forging(RF)deformation process,the differences of dynamic precipitates can be attributed to microstructural difference and solubility limit of Al at different tem *** summarizing the tensile test results,the sample forged at 350℃exhibited the best strength-ductility synergy,exhibiting the highest elongation(EL)of 23.2%with a 251 MPa yield strength(YS)and 394 MPa ultimate tensile strength(UTS)in center region,and combined with the highest strength value of 256 MPa YS and 420 MPa UTS in the center region,while the EL was slightly degraded to 19.8%.

关键词： Gradient microstructure Radial forging Strength-ductility synergy Magnesium alloy Strengthening mechanism

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

欢迎您,

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

请选择保存的检索档案：

请选择收藏分类：

通借通还

欢迎您,

建议与咨询 留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

请选择保存的检索档案： 新增检索档案 确定 取消

请选择收藏分类： 新增自定义分类 确定 取消

通借通还

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

请选择保存的检索档案：

请选择收藏分类：