检索结果-南通市图书馆

Early-stage latent thermal failure of single-crystal Ni-rich layered cathode

Journal of Energy Chemistry 2024年第9期96卷 578-587页

作者： Xiao Han Ruoyu Xu Yan Li Yang Ding Manchen Zhang Bo Wang Xiaoxing Ke Manling Sui Pengfei Yan Beijing Key Laboratory of Microstructure and Property of Solids Faculty of Materials and ManufacturingBeijing University of TechnologyBeijing 100124China Watt Laboratory Central Research InstituteHuawei Technologies Co.LTDShenzhen 518129GuangdongChina

High nickel content worsens the thermal stability of layered cathodes for lithium-ion batteries,raising safety concerns for their *** understanding the thermal failure process can offer valuable guidance for material optimization on thermal stability and new opportunities in monitoring battery thermal runaway(TR).Herein,this work comprehensively investigates the thermal failure process of a single-crystal nickel-rich layered cathode and finds that the latent thermal failure starts at∼120℃far below the TR temperature(225℃).During this stage of heat accumulation,sequential structure transition is revealed by atomic resolution electron microscopy,which follows the layered→cation mixing layered→LiMn_(2)O_(4)-type spinel→disordered spinel→rock *** progression occurs as a result of the continuous migration and densification of transition metal *** transition generates gaseous oxygen,initially confined within the isolated closed pores,thereby not showing any thermal failure phenomena at the *** temperature leads to pore growth and coalescence,and eventually to the formation of open pores,causing oxygen gas release and weight loss,which are the typical TR *** highlight that latent thermal instability occurs before the macro-level TR,suggesting that suppressing phase transitions caused by early thermal instability is a crucial direction for material *** findings can also be used for early warning of battery thermal runaway.

关键词： Thermal runaway Nickel-rich layered cathode Transmission electron microscopy Lithium-ion battery Phase transition

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Microstructure evolution of Ti_(48)Zr_(27)Cu_(6)Nb_(5)Be_(14)amorphous alloy after semi-solid isothermal treatment

引用

China Foundry 2024年第3期21卷 287-294页

作者： Xin-hua Huang Jing-wen Pu Yong-xin Luo Yue-jun Ouyang School of Material Electricity and Intelligent ManufacturingHuaihua UniversityHuaihua 330031HunanChina Hunan Renewable Aluminum Innovation research center Huaihua UniversityHuaihua 330031HunanChina

The as-cast amorphous Ti_(48)Zr_(27)Cu_(6)Nb_(5)Be_(14)composites,comprising in situ formedβ-Ti ductile crystalline precipitates,were prepared by water cooled copper mold suction ***,the semi-solid composites were obtained after the as-cast composites were treated by semi-solid isothermal *** microstructure evolution and kinetics of the composites were *** show that the microstructures of both the as-cast and semi-solid composites comprise ofβ-Ti crystal phases and amorphous matrix *** and after treatment,the crystals evolve from fine granular or fine dendritic crystals to coarse *** the treatment temperature increasing or the time prolonging,the average crystal size gradually increases and the surface morphology of the crystals gradually becomes *** studying the microstructural evolution and dynamics during the isothermal treatment process,it is found that the final morphology ofβ-Ti crystals is influenced by the isothermal treatment temperature and time(t),and theβ-Ti evolution rate increases with an increase in treatment *** addition,a linear relationship was observed between the size of cubicβ-Ti crystals(D^(3))and t;the growth kinetics factor K is 3.8μm^(3)·s^(-1).As the K value closes to 4μm^(3)·s^(-1),it is inferred the morphology evolution ofβ-Ti crystals is a coarsening behavior controlled by the diffusion of solute elements.

关键词： Ti_(48)Zr_(27)Cu_(6)Nb_(5)Be_(14) amorphous matrix composites semi-solid as-cast microstructure

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Cryptanalysis of efficient semi-quantum secret sharing protocol using single particles

引用

Chinese Physics B 2024年第4期33卷 254-257页

作者：高甘 Department of Electrical Engineering Tongling UniversityTongling 244061China Anhui Engineering research center of Intelligent manufacturing of Copper-based Materials Tongling UniversityTongling 244061China Anhui Joint Key Laboratory of Critical technologies for High-End Copper-Based New Materials Tongling UniversityTongling 244061China

In paper[***.B 32070308(2023)],Xing et *** a semi-quantum secret sharing protocol by using single *** study the security of the proposed protocol and find that it is not secure,that is,the three dishonest agents,Bob,C... 详细信息

关键词： security loophole rearranging orders semi-quantum secret sharing single particles

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Hybrid 3D printed three-axis force sensor aided by machine learning decoupling

引用

International Journal of Smart and Nano Materials 2024年第2期15卷 261-278页

作者： Guotao Liu Peishi Yu Yin Tao Tao Liu Hezun Liu Junhua Zhao Jiangnan Key Laboratory of Advanced Food manufacturing Equipment and Technology School of Mechanical EngineeringJiangnan UniversityWuxiPR China Jiangsu Province Engineering research center of Micro-Nano Additive and Subtractive manufacturing Institute of Advanced TechnologyJiangnan UniversityWuxiPR China

Identification of magnitude and orientation for spatially applied loading is highly desired in the fields of not only the machinery components but also human-machine *** the fact that the 3-axis force sensor with different structures has been proposed to measure the spatial force,there are still some common limitations including the multi-step manufacturing-assembly processes and complicated testing of decoupling ***,we propose a rapid fabrication strategy with low-cost to achieve high-precision 3-axis force *** sensor is designed to compose of structural Maltese cross base and sensing *** is directly fabricated within one step by a hybrid 3D printing technology combining deposition modeling(FDM)with direct-ink-writing(DIW).In particular,a machine learning(ML)model is used to convert the strain signal to the force *** of a mount of calibration tests,this ML model is trained by sufficient simulation data based on programmed batch finite element *** sensor is capable of continuously identifying a spatial force with varying magnitude and orientation,which successfully quantify the applied force of traditional Chinese medicine physiotherapy including Gua Sha and *** work provides insight for design and rapid fabrication of multi-axis force sensors,as well as potential applications.

关键词： Hybrid 3D printing 3-axis force sensor machine learning nonlinear decoupling

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Process metallurgy and data-driven prediction and feedback of blast furnace heat indicators

引用

International Journal of Minerals,Metallurgy and Materials 2024年第6期31卷 1228-1240页

作者： Quan Shi Jue Tang Mansheng Chu School of Metallurgy Northeastern UniversityShenyang 110819China Institute for Frontier technologies of Low-carbon Steelmaking Northeastern UniversityShenyang 110819China Engineering research center of Frontier technologies for Low-carbon Steelmaking(Ministry of Education) Shenyang 110819China

The prediction and control of furnace heat indicators are of great importance for improving the heat levels and conditions of the complex and difficult-to-operate hour-class delay blast furnace(BF)*** this work,a prediction and feedback model of furnace heat indicators based on the fusion of data-driven and BF ironmaking processes was *** data on raw and fuel materials,process op-eration,smelting state,and slag and iron discharge during the whole BF process comprised 171 variables with 9223 groups of data and were comprehensively analyzed.A novel method for the delay analysis of furnace heat indicators was *** extracted delay variables were found to play an important role in *** method that combined the genetic algorithm and stacking efficiently im-proved performance compared with the traditional machine learning algorithm in improving the hit ratio of the furnace heat prediction *** hit ratio for predicting the temperature of hot metal in the error range of±10℃ was 92.4%,and that for the chemical heat of hot metal in the error range of±0.1wt%was 93.3%.On the basis of the furnace heat prediction model and expert experience,a feedback model of furnace heat operation was established to obtain quantitative operation suggestions for stabilizing BF heat *** sugges-tions were highly accepted by BF ***,the comprehensive and dynamic model proposed in this work was successfully ap-plied in a practical BF *** improved the BF temperature level remarkably,increasing the furnace temperature stability rate from 54.9%to 84.9%.This improvement achieved considerable economic benefits.

关键词： blast furnace furnace heat genetic algorithm stacking prediction and feedback

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Control of electromechanical performance in 3D printing latticestructured BaTiO_(3) piezoelectric ceramics

引用

Journal of Advanced Ceramics 2024年第7期13卷 987-1001页

作者： Zhujun Jiang Yinghong Sun Jimin Chen Yong Zeng Faculty of Materials and manufacturing Beijing University of TechnologyBeijing 100124China Beijing Engineering research center of 3D Printing for Digital Medical Health Beijing University of TechnologyBeijing 100124China

Barium titanate(BaTiO_(3))piezoelectric ceramics with triply periodic minimal surface(TPMS)structures have been frequently used in filters,engines,artificial bones,and other fields due to their high specific surface area,high thermal stability,and good heat ***,only a limited number of studies have analyzed the effect of various parameters,such as different wall thicknesses and porosities of TPMS structures,on ceramic electromechanical *** this study,we first employed vat photopolymerization(VPP)three-dimensional(3D)printing technology to fabricate high-performance BaTiO_(3) *** investigated the slurry composition design and forming process and designed a stepwise sintering postprocessing technique to achieve a density of 96.3%and a compressive strength of 250±25 MPa,with the piezoelectric coefficient(d_(33))reaching 263 pC/***,we explored the influence of three TPMS structures,namely,diamond,gyroid,and Schwarz P,on the piezoelectric and mechanical properties of BaTiO_(3) ceramics,with the gyroid structure identified as exhibiting optimal ***,we examined the piezoelectric and mechanical properties of BaTiO_(3) ceramics with the gyroid structure of varying wall thicknesses and porosities,thus enabling the modulation of ceramic electromechanical performance.

关键词： three-dimensional(3D)printing piezoelectric ceramics porous structure mechanical properties electrical properties

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Laser-induced cleaning for modulating hydrophilic/hydrophobic properties of Ti-6Al-4V alloy surface microstructure

引用

Tungsten 2024年第4期6卷 669-674页

作者： Zhi-Hao Chen Bao Liu Yan-Hu Zhang Institute of Advanced manufacturing and modern Equipment Technology Jiangsu University Automotive Engineering research Institute Jiangsu University Department of Mechanical Engineering City University of Hong Kong

Surface treatment of metals is a primary method to prevent equipment *** significant efforts and notable advancements,many existing technologies incur high costs and demanding technical requirements,particularly in th... 详细信息

关键词： TITANIUM

来源：

同方期刊数据库评论

在线全文

同方期刊数据库

学校读者我要写书评

暂无评论

Improving mechanical properties and high-temperature oxidation of press hardened steel by adding Cr and Si

引用

International Journal of Minerals,Metallurgy and Materials 2024年第8期31卷 1865-1875页

作者： Rong Zhu Yonggang Yang Baozhong Zhang Borui Zhang Lei Li Yanxin Wu Zhenli Mi National Engineering research center for Advanced Rolling and Intelligent manufacturing University of Science and Technology BeijingBeijing 102206China manufacturing Management Department Ningbo Iron&Steel Co.Ltd.Ningbo 315800China Hunan Valin Lianyuan Iron and Steel Co. Ltd.Loudi 417009China

This work investigated the effect of Cr and Si on the mechanical properties and oxidation resistance of press hardened *** indicated that the microstructure of the Cr-Si micro-alloyed press hardened steel consisted of lath martensite,M_(23)C_(6)carbides,and retained *** retained austenite and carbides are responsible for the increase in elongation of the micro-alloyed *** addition,after oxidation at 930℃for 5 min,the thickness of the oxide scales on the Cr-Si micro-alloyed press hardened steel is less than 5μm,much thinner than 45.50μm-thick oxide scales on *** oxide scales of the Cr-Si micro-alloyed steel are composed of Fe_(2)O_(3),Fe_(3)O_(4),mixed spinel oxide(FeCr_(2)O_(4)and Fe_(2)SiO_(4)),and amorphous SiO_(2).Adding Cr and Si significantly reduces the thickness of the oxide scales and prevents the generation of the FeO *** to the increase of spinel FeCr_(2)O_(4)and Fe_(2)SiO_(4)phase in the inner oxide scale and the amorphous SiO_(2)close to the substrate,the oxidation resistance of the Cr-Si micro-alloyed press hardened steel is improved.

关键词： Cr-Si micro-alloyed press hardened steel mechanical properties oxidation resistance amorphous SiO_(2)

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Single-cluster electronics using metallic clusters:Fabrications,regulations,and applications

引用

Nano research 2024年第1期17卷 65-78页

作者： Caiyun Wei Wei Xu Shurui Ji Ruiyun Huang Junyang Liu Wenqiu Su Jie Bai Jiale Huang Wenjing Hong State Key Laboratory of Physical Chemistry of Solid Surfaces National Engineering Research Centre of Chemicals for Electronic ManufacturingCollege of Chemistry and Chemical Engineering&Innovation Laboratory for Sciences and Technologies of Energy Materials of Fujian Province(IKKEM)Xiamen UniversityXiamen 361005China

Metallic clusters,ranging from 1 to 2 nm in size,have emerged as promising candidates for creating nanoelectronic devices at the single-cluster *** the intermediate quantum properties between metals and semiconductors,these metallic clusters offer an alternative pathway to silicon-based electronics and organic molecules for miniaturized electronics with dimensions below 5 *** progress has been made in studies of single-cluster electronic ***,a clear guide for selecting,synthesizing,and fabricating functional single-cluster electronic devices is still *** review article provides a comprehensive overview of single-cluster electronic devices,including the mechanisms of electron transport,the fabrication of devices,and the regulations of electron transport ***,we discuss the challenges and future directions for single-cluster electronic devices and their potential applications.

关键词： single-cluster junctions electronic properties electron transport metallic clusters structure regulation

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Mitochondrial DNA methylation and mitochondria-related epigenetics in neurodegeneration

引用

Neural Regeneration research 2024年第2期19卷 405-406页

作者： Fabio Coppedè Department of Translational research and of New Surgical and Medical technologies Laboratory of Medical GeneticsUniversity of PisaPisaItaly、Interdepartmental Research Center of Biology and Pathology of AgingUniversity of PisaPisaItaly

Mitochondria are cytoplasmic organelles referred to as the powerhouse of the cell because they are primarily involved in oxidative phosphorylation and energy *** are particularly abundant in tissues with high energy demands,including muscle,liver,and brain,and mitochondrial dysfunction,oxidative mitochondrial DNA(mtDNA)damage,and impaired mitochondrial dynamics have often been associated with neurodegeneration.

关键词： impaired neurodegeneration oxidative

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

欢迎您,

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

请选择保存的检索档案：

请选择收藏分类：

通借通还

欢迎您,

建议与咨询 留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

请选择保存的检索档案： 新增检索档案 确定 取消

请选择收藏分类： 新增自定义分类 确定 取消

通借通还

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

请选择保存的检索档案：

请选择收藏分类：