检索结果-南通市图书馆

Pool bio-oxidation and fitting analysis of low-grade arsenic-containing refractory gold ore

在线全文

学校读者我要写书评

暂无评论

Green Chemical Engineering 2024年第4期5卷 511-518页

作者： Jiafeng Li Linlin Tong Haijun Zhang Qiao Chen Hongying Yang Lingling Shen Yiqin Zhai Rongfan Yao School of Mines China University of Mining and Technology School of metallurgy Northeastern University School of Chemical Engineering Technology China University of Mining and Technology School of Materials Science and Engineering Lanzhou University of Technology School of Intelligent Manufacturing Jiangsu Vocational Institute of Architectural Technology

To overcome the limitations of geography, climate, and ore characteristics on the ore beneficiation process, biooxidation studies on low-grade arsenic-bearing refractory gold ore by pool leaching were carried out, as well as process fitting analysis. The gold particles are encapsulated by pyrite and arsenopyrite. After 60 days of biooxidation, the oxidation rates of arsenic, sulfur, and gold were 39%～69%, 24%～41%, and 49%～83%, respectively. The inoculated Acidithiobacillus ferrooxidans, Ferroplasma acidiphilum, and Leptospirillum ferrodiazotrophum could all mediate the initial pyrite/arsenopyrite oxidation and the Fe2+oxidation reaction, but only the former could mediate the subsequent sulfur compound oxidation. When compared to daily bacterial circulation and bacterial replacement every ten days, aeration improved the gold leaching rate by 14%～22%. The Boltzmann model could fit both the arsenic and sulfur bio-oxidation, with model fit variances greater than 0.98. Based on the experimental and fitting results, the bio-oxidation cycle was determined to be 60 days, and the bio-oxidation mechanisms are summarized. This study has significant practical implications for the rational utilization of gold resources and provides theoretical and practical guidance for similar gold ores.

关键词： Refractory gold ore Bio-oxidation Pool leaching Boltzmann model

Suppressed Internal Intrinsic Stress Engineering in High-Performance Ni-Rich Cathode Via Multi layered In Situ Coating Structure

在线全文

同方期刊数据库

学校读者我要写书评

暂无评论

Energy & Environmental Materials 2024年第2期7卷 58-66页

作者： Jiachao Yang Yunjiao Li Xiaoming Xi Junchao Zheng Jian Yu Zhenjiang He School of metallurgy and Environment Central South UniversityChangsha 410083China Engineering Research Center of the Ministry of Education for Advanced Battery Materials Central South UniversityChangsha 410083China Changsha Research Institute of mining and metallurgy Changsha 410083China Ningbo Ronbay New Energy Technol Co Ltd Tanjialing East Rd 39Ningbo 315400China

LiNi_(x)Co_(y)Al_(z)O_(2)(NCA)cathode materials are drawing widespread attention,but the huge gap between the ideal and present cyclic stability still hinders their further commercial application,especially for the Ni-rich LiNi_(x)Co_(y)Al_(z)O_(2)(x>0.8,x+y+z=1)cathode material,which is owing to the structural degradation and particles'intrinsic *** tackle the problems,Li_(0.5)La_(2)Al_(0.5)O_(4)in situ coated and Mn compensating doped multilayer LiNi_(0.82)Co_(0.14)Al_(0.04)O_(2)was *** refinement indicates that La-Mn co-modifying could realize appropriate Li/Ni disorder *** results and in situ XRD patterns reveal that the LLAO coating layer could effectively restrain crack in secondary particles benefited from the suppressed internal *** further improves as NCA-LM2 has superior mechanical *** SEM,TEM,XPS tests indicate that the cycled cathode with LLAO-Mn modification displays a more complete morphology and less side reaction with *** was used to further investigate cathode-electrolyte interface which was reflected by gas ***-LM2 releases less CO_(2)than NCA-P indexing on a more stable *** modified material presents outstanding capacity retention of 96.2%after 100 cycles in the voltage range of 3.0-4.4 V at 1C,13%higher than that of the pristine and 80.8%at 1 C after 300 *** excellent electrochemical performance could be attributed to the fact that the high chemically stable coating layer of Li_(0.5)La_(2)Al_(0.5)O_(4)(LLAO)could enhance the interface and the Mn doping layer could suppress the influence of the lattice mismatch and *** believe that it can be a useful strategy for the modification of Ni-rich cathode material and other advanced functional material.

关键词： compensating doped in situ coating multilayer material Ni-rich cathode materials suppressed internal strain

Rapid prediction of flow and concentration fields in solid-liquid suspensions of slurry electrolysis tanks

在线全文

学校读者我要写书评

暂无评论

International Journal of Minerals,metallurgy and Materials 2024年第9期31卷 2006-2016页

作者： Tingting Lu Kang Li Hongliang Zhao Wei Wang Zhenhao Zhou Xiaoyi Cai Fengqin Liu State Key Laboratory of Advanced metallurgy University of Science and Technology BeijingBeijing 100083China State Key Laboratory of Intelligent Optimized Manufacturing in mining&metallurgy Process Beijing 102628China School of Materials Science and Engineering Lanzhou University of TechnologyLanzhou 730050China School of Metallurgical and Ecological Engineering University of Science and Technology BeijingBeijing 100083China

Slurry electrolysis(SE),as a hydrometallurgical process,has the characteristic of a multitank series connection,which leads to various stirring conditions and a complex solid suspension *** computational fluid dynamics(CFD),which requires high computing resources,and a combination with machine learning was proposed to construct a rapid prediction model for the liquid flow and solid concentration fields in a SE *** scientific selection of calculation samples via orthogonal experiments,a comprehensive dataset covering a wide range of conditions was established while effectively reducing the number of simulations and providing reasonable weights for each ***,a prediction model of the SE tank was constructed using the K-nearest neighbor *** results show that with the increase in levels of orthogonal experiments,the prediction accuracy of the model improved *** model established with four factors and nine levels can accurately predict the flow and concentration fields,and the regression coefficients of average velocity and solid concentration were 0.926 and 0.937,*** with traditional CFD,the response time of field information prediction in this model was reduced from 75 h to 20 s,which solves the problem of serious lag in CFD applied alone to actual production and meets real-time production control requirements.

关键词： slurry electrolysis solid-liquid suspension computational fluid dynamics K-nearest neighbor algorithm rapid prediction

Preparation of K-doped g-C_(3)N_(4) composite loaded on magnetic attapulgite and its degradation performance for malachite green

在线全文

学校读者我要写书评

暂无评论

Chinese Journal of Chemical Engineering 2024年第7期71卷 110-121页

作者： Aishun Ma Hanlin Qian Hongxia Liu Sili Ren Jiangxi Key Laboratory of mining&metallurgy Environmental Pollution Control Jiangxi University of Science and TechnologyGanzhou 341000China Jiangxi Provincial Key Laboratory of Low-Carbon Processing and Utilization of Strategic Metal Mineral Resources Jiangxi University of Science and TechnologyGanzhou 341000China

Visible-light-driven photocatalysis is a promising technology for the treatment of dye *** this work,a novel photocatalyst of K-doped g-C_(3)N_(4) loaded on magnetic attapulgite(ATP)(Kω-g-C_(3)N_(4)@ATP-Fe_(3)O_(4))with excellent visible light photocatalytic properties and stability were successfully prepared and *** removal efficiency of Kω-g-C_(3)N_(4)@ATP-Fe_(3)O_(4) for malachite green(MG)was studied,and the degradation mechanism was analyzed and *** was found that the K_(5)-g-C_(3)N_(4)@ATP-Fe_(3)O_(4) photocatalyst possessed excellent degradation efficiency of over 98.0%for the MG dye wastewater under optimal ***,the K_(5)-g-C_(3)N_(4)@ATP-Fe_(3)O_(4) materials possessed good recyclability with a removal rate over 82%after 4 *** visible light condition,the K_(5)-g-C_(3)N_(4)@ATP-Fe_(3)O_(4) photocatalyst produce radicals of·OH and O_(2)^(-)to degrade the MG dyes,which was supported by electron paramagnetic resonance(EPR)and radical trapping *** addition,the LC-MS analysis interpreted the degradation pathways and intermediates of MG in the *** findings in this work indicate that the prepared photocatalytic material has excellent degradation efficiency for MG and can be applied in dye wastewater treatment.

关键词： Photocatalyst Malachite green K-doped g-C_(3)N_(4) Degradation

Theory,technology and application of grouted bolting in soft rock roadways of deep coal mines

在线全文

学校读者我要写书评

暂无评论

International Journal of Minerals,metallurgy and Materials 2024年第7期31卷 1463-1479页

作者： Hongpu Kang Jianwei Yang Pengfei Jiang Fuqiang Gao Wenzhou Li Jiafeng Li Huiyuan Chen Coal mining Research Institute China Coal Technology and Engineering Group Co.Ltd.Beijing 100013China Coal mining Branch China Coal Research InstituteBeijing 100013China State Key Laboratory of Intelligent mining and Strata Control Beijing 100013China

The grouted bolt,combining rock bolting with grouting techniques,provides an effective solution for controlling the surrounding rock in deep soft rock and fractured *** has been extensively applied in numerous deep mining areas characterized by soft rock roadways,where it has demonstrated remarkable control *** article systematically explores the evolution of grouted bolting,covering its theoretical foundations,design methods,materials,construction processes,monitoring measures,and methods for assessing its *** overview encompassed several key elements,delving into anchoring theory and grouting reinforcement *** new principle of high pretensioned high-pressure splitting grouted bolting collaborative active control is introduced.A fresh method for dynamic information design is also *** discussion touches on both conventional grouting rock bolts and cable bolts,as well as innovative grouted rock bolts and cables characterized by their high pretension,strength,and sealing hole *** examination of the merits and demerits of standard inorganic and organic grouting materials versus the new inorganic–organic composite materials,including their specific application conditions,was ***,the article presents various methods and instruments to assess the support effect of grouting rock bolts,cable bolts,and grouting ***,it provides a foundation for understanding the factors influencing decisions on grouted bolting timing,the sequence of grouting,the pressure applied,the volume of grout used,and the strategic arrangement of grouted rock bolts and cable *** application of the high pretensioned high-pressure splitting grouted bolting collaborative control technology in a typical kilometer-deep soft rock mine in China—the soft coal seam and soft rock roadway in the Kouzidong coal mine,Huainan coal mining area,was ***,the existing problems in grouted bolting control

关键词： deep coal mine soft rock roadway grouted bolting rock bolt and cable grouting material high-pressure splitting grouting collaborative control technology

U-Pb dating of monazite in the Bainiuchang silver polymetallic deposit,Yunnan Province,and its limitation on Mesozoic mineralization

在线全文

学校读者我要写书评

暂无评论

China Geology 2024年第3期7卷 592-595页

作者： Bo-de Lu Wen-chang Li Xue-long Liu Guang-zhi Meng Qi-he Long Hong Zhang Jun-shan Dao Fang-lan Li Jie-hu Zhou Mao-huang Fan Xue Mi Nan Shi Zhen-liang Cao College of Land Resources and Engineering Kunming University of Science and TechnologyKunming 650093China Geological Team 306 of Yunnan Non-ferrous Metals Geological Bureau Kunming 650217China Mengzi mining and metallurgy Co. Ltd.Mengzi 661199China

*** The Gejiu-Bozhushan-Laojunshan tin-tungsten polymetallic metallogenic belt is located in southeastern *** is bounded by the Mile-Shizong Fault and the Yangzi Plate to the north and west,respectively,while the Honghe Fault represents its southwestern *** is adjacent to the Ailaoshan Fault,and extends to Guangxi and Vietnam to the southeast(Fig.1a;Liu JP et al.,2021).

关键词： silver dating southeast

Wetting front migration model of ion-adsorption rare earth during the multi-hole unsaturated liquid injection

在线全文

学校读者我要写书评

暂无评论

Journal of Rock Mechanics and Geotechnical Engineering 2024年第2期16卷 483-496页

作者： Yu Wang Xiaojun Wang Yuchen Qiu Hao Wang Gang Li Kaijian Hu Wen Zhong Zhongqun Guo Bing Li Chunlei Zhang Guangxiang Ye Jiangxi Key Laboratory of mining Engineering Jiangxi University of Science and TechnologyGanzhou341000China School of Resources and Environment Engineering Jiangxi University of Science and TechnologyGanzhou341000China School of Civil Engineering and Surveying&Mapping Engineering Jiangxi University of Science and TechnologyGanzhou341000China Ganzhou Nonferrous metallurgy Research Institute Ganzhou341000China

In the process of ion-adsorption rare earth ore leaching,the migration characteristics of the wetting front in multi-hole injection holes and the influence of wetting front intersection effect on the migration distance of wetting fronts are still ***,wetting front migration distance and leaching time are usually required to optimize the leaching *** this study,wetting front migration tests of ionadsorption rare earth ores during the multi-hole fluid injection(the spacing between injection holes was 10 cm,12 cm and 14 cm)and single-hole fluid injection were completed under the constant water head *** the pre-intersection stage,the wetting front migration laws of ion-adsorption rare earth ores during the multi-hole fluid injection and single-hole fluid injection were *** the postintersection stage,the intersection accelerated the wetting front *** using the Darcy’s law,the intersection effect of wetting fronts during the multi-hole liquid injection was transformed into the water head height directly above the ***,based on the Green-Ampt model,a wetting front migration model of ion-adsorption rare earth ores during the multi-hole unsaturated liquid injection was *** analysis results showed that the proposed model can accurately simulate the infiltration process under experimental *** research results enrich the infiltration law and theory of ion-adsorption rare earth ores during the multi-hole liquid injection,and this study provides a scientific basis for optimizing the liquid injection well pattern parameters of ion-adsorption rare earth in situ leaching in the future.

关键词： Ion-adsorption rare earth ore Multi-hole unsaturated liquid injection In situ leaching Intersection effect Calculation model

基于氯化胆碱的低共熔体系在Au上电沉积无枝晶Zn

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Transactions of Nonferrous Metals Society of China 2024年第7期34卷 2367-2380页

作者： Vesna S.CVETKOVIĆ Nebojša D.NIKOLIĆ Tanja S.BARUDŽIJA Silvana B.DIMITRIJEVIĆ Jovan N.JOVIĆEVIĆ Department of Electrochemistry Institute of ChemistryTechnology and MetallurgyUniversity of BelgradeNjegoševa 1211000 BelgradeSerbia Institute for Nuclear Sciences Vinča University of BelgradeP.O.Box 52211001 BelgradeSerbia mining and metallurgy Institute Zeleni bulevar 3519210 BorSerbia

以氯化胆碱和乙二醇混合液为低共熔溶剂,不使用其他添加剂,电化学沉积无枝晶Zn/Au合金。在不同的Zn(Ⅱ)浓度下,采用恒电位电沉积法在相对较低的Zn电沉积过电位下进行电沉积。通过循环伏安法(CV)和计时安培法(CA)揭示Zn电沉积的电化学机... 详细信息

以氯化胆碱和乙二醇混合液为低共熔溶剂,不使用其他添加剂,电化学沉积无枝晶Zn/Au合金。在不同的Zn(Ⅱ)浓度下,采用恒电位电沉积法在相对较低的Zn电沉积过电位下进行电沉积。通过循环伏安法(CV)和计时安培法(CA)揭示Zn电沉积的电化学机理。采用扫描电子显微镜和X射线衍射分析(XRD)对沉积层的形貌和结构进行表征,并用能谱仪对沉积层进行元素分析。CV结果表明,Zn的电沉积始于Zn欠电位沉积区,并一直持续到Zn过电位沉积(OPD)区。随着Zn(Ⅱ)浓度的增加,Zn/Zn(Ⅱ)电偶的沉积电位向更高的正值偏移。CA分析表明,在Zn的OPD区开始三维渐进形核,随后形成三维生长。形貌分析表明,电沉积始于致密Zn岛的形成,随后形成无枝晶Zn/Au合金。XRD分析表明,其物相为金属Zn、立方AuZn3和Au Zn金属间化合物。

关键词：锌电沉积低共熔溶剂锌金合金形貌结构

同方期刊数据库

Effects of cement content, polypropylene fiber length and dosage on fluidity and mechanical properties of fiber-toughened cemented aeolian sand backfill

在线全文

学校读者我要写书评

暂无评论

International Journal of Minerals,metallurgy and Materials 2024年第11期31卷 2404-2416页

作者： Shushuai Wang Renshu Yang Yongliang Li Zhongwen Yue School of Mechanics and Civil Engineering China University of Mining and Technolog(Beijing)Beijing 100083China School of Civil and Resource Engineering University of Science and Technology BeijingBeijing 100083China School of Energy and mining Engineering China University of Mining and Technology(Beijing)Beijing 100083China

Using aeolian sand(AS)for goaf backfilling allows coordination of green mining and AS *** AS backfill(CASB)exhibits brittle ***(PP)fibers are good toughening *** the toughening effect of fibers is analyzed,their influence on the slurry conveying performance should also be ***,cement affects the interactions among the hydration products,fibers,and *** this study,the effects of cement content(8wt%,9wt%,and 10wt%)and PP fiber length(6,9,and 12 mm)and dosage(0.05wt%,0.1wt%,0.15wt%,0.2wt%,and 0.25wt%)on fluidity and mechanical properties of the fibertoughened CASB(FCASB)were *** results indicated that with increases in the three aforementioned factors,the slump flow decreased,while the rheological parameters *** compressive strength(UCS)increased with the increase of cement content and fiber length,and with an increase in fiber dosage,it first increased and then *** strain increased with the increase of fiber dosage and *** effect of PP fibers became more pronounced with the increase of cement *** image correlation(DIC)test results showed that the addition of fibers can restrain the peeling of blocks and the expansion of fissure,and reduce the stress concentration of the *** electron microscopy(SEM)test indicated that the functional mechanisms of fibers mainly involved the interactions of fibers with the hydration products and matrix and the spatial distribution of *** the basis of single-factor analysis,the response surface method(RSM)was used to analyze the effects of the three aforementioned factors and their interaction terms on the *** influence surface of the two-factor interaction terms and the three-dimensional scatter plot of the three-factor coupling were *** conclusion,the response law of the FCASB properties under the effects of cement and PP fibers were obtained,which provides theoretical and engineerin

关键词： polypropylene fibers fiber-toughened cemented aeolian sand backfill digital image correlation scanning electron microscopy response surface method