检索结果-南通市图书馆

Journal of Modern Power Systems and Clean Energy 2024年第3期12卷 981-990页

作者： Ning Li Yujie Cao Xiaokang Liu Yan Zhang Ruotong Wang Lin Jiang Xiao-Ping Zhang School of Electrical Engineering Xi'an University of Technology the department of electronics Information and Bioengineering Xi'an Jiaotong University the department of Electrical Engineering and electronics University of Liverpool the department of Electronic Electrical and Systems Engineering University of Birmingham

Two-level totem-pole power factor correction(PFC) converters in critical conduction mode(CRM) suffer from the wide regulation range of switching frequency. Besides, in highfrequency applications, the number of switching times increases, resulting in significant switching losses. To solve these issues, this paper proposes an improved modulation strategy for the single-phase three-level neutral-point-clamped(NPC) converter in CRM with PFC. By optimizing the discharging strategy and switching state sequence, the switching frequency and its variation range have been efficiently reduced. The detailed performance analysis is also presented regarding the switching frequency, the average switching times, and the effect of voltage gain. A 2 k W prototype is built to verify the effectiveness of the proposed modulation strategy and analysis results. Compared with the totem-pole PFC converter, the switching frequency regulation range of the three-level PFC converter is reduced by 36.48% and the average switching times is reduced by 45.10%. The experimental result also shows a 1.2% higher efficiency for the three-level PFC converter in the full load range.

关键词： Switches Switching frequency Control systems Topology Bridge circuits Inductors Customer relationship management

An efficient permutation approach for SbPN-based symmetric block ciphers

在线全文

同方期刊数据库

学校读者我要写书评

暂无评论

Cybersecurity 2024年第2期7卷 113-130页

作者： Mir Nazish M.Tariq Banday Insha Syed Sheena Banday department of electronics and Instrumentation Technology University ofKashmirSrinagar 190006India

It is challenging to devise lightweight cryptographic primitives efficient in both hardware and software that can provide an optimum level of security to diverse Internet of Things applications running on low-end constrained devices.Therefore,an effcient hardware design approach that requires some specific hardware resource may not be effcient if implemented in software.Substitution bit Permutation Network based ciphers such as PRESENT and GIFT are effcient,lightweight cryptographic hardware design approaches.These ciphers introduce confusion and diffu-sion by employing a 4×4 static substitution box and bit permutations.The bit-wise permutation is realised by sim-ple rerouting,which is most cost-effective to implement in hardware,resulting in negligible power consumption.However,this method is highly resource-consuming in software,particularly for large block-sized ciphers,with each single-bit permutation requiring multiple sub-operations.This paper proposes a novel software-based design approach for permutation operation in Substitution bit Permutation Network based ciphers using a bit-banding fea-ture.The conventional permutation using bit rotation and the proposed approach have been implemented,analysed and compared for GIFT and PRESENT ciphers on ARM Cortex-M3-based LPC1768 development platform with KEIL MDK used as an Integrated Development Environment.The real-time performance comparison between conven-tional and the proposed approaches in terms of memory(RAM/ROM)footprint,power,energy and execution time has been carried out using ULINKpro and ULINKplus debug adapters for various code and speed optimisation sce-narios.The proposed approach substantially reduces execution time,energy and power consumption for both PRE-SENT and GIFT ciphers,thus demonstrating the effciency of the proposed method for Substitution bit Permutation Network based symmetric block ciphers.

关键词： Lightweight cryptography PRESENT GIFT SbPN Cortex-M LPC1768 Bit-band memory

Bioinspired 3D flexible devices and functional systems

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

National Science Review 2024年第3期11卷 271-295页

作者： Xu Cheng Zhangming Shen Yihui Zhang Applied Mechanics Laboratory Department of Engineering Mechanics Tsinghua University Laboratory of Flexible electronics Technology Tsinghua University

Flexible devices and functional systems with elaborated three-dimensional(3D) architectures can endow better mechanical/electrical performances, more design freedom, and unique functionalities, when compared to their two-dimensional(2D) counterparts. Such 3D flexible devices/systems are rapidly evolving in three primary directions, including the miniaturization, the increasingly merged physical/artificial intelligence and the enhanced adaptability and capabilities of heterogeneous integration.Intractable challenges exist in this emerging research area, such as relatively poor controllability in the locomotion of soft robotic systems, mismatch of bioelectronic interfaces, and signal coupling in multi-parameter sensing. By virtue of long-time–optimized materials, structures and processes, natural organisms provide rich sources of inspiration to address these challenges, enabling the design and manufacture of many bioinspired 3D flexible devices/systems. In this Review, we focus on bioinspired 3D flexible devices and functional systems, and summarize their representative design concepts, manufacturing methods, principles of structure-function relationship and broad-ranging applications. Discussions on existing challenges, potential solutions and future opportunities are also provided to usher in further research efforts toward realizing bioinspired 3D flexible devices/systems with precisely programmed shapes,enhanced mechanical/electrical performances, and high-level physical/artificial intelligence.

关键词： bioinspired designs biomimetic 3D structures 3D flexible electronics 3D functional systems direct 3D manufacture 2D-to-3D assembly

Ag-integrated mixed metallic Co-Fe-Ni-Mn hydroxide composite as advanced electrode for high-performance hybrid supercapacitors

在线全文

同方期刊数据库

学校读者我要写书评

暂无评论

Journal of Energy Chemistry 2024年第1期88卷 579-591,I0013页

作者： Anki Reddy Mule Bhimanaboina Ramulu Shaik Junied Arbaz Anand Kurakula Jae Su Yu department of electronics and Information Convergence Engineering Institute for Wearable Convergence ElectronicsKyung Hee UniversityYongin-siGyeonggi-do 17104Republic of Korea

Direct growth of redox-active noble metals and rational design of multifunctional electrochemical active materials play crucial roles in developing novel electrode materials for energy storage devices.In this regard,silver(Ag)has attracted great attention in the design of efficient electrodes.Inspired by the house/building process,which means electing the right land,it lays a strong foundation and building essential columns for a complex structure.Herein,we report the construction of multifaceted heterostructure cobalt-iron hydroxide(CFOH)nanowires(NWs)@nickel cobalt manganese hydroxides and/or hydrate(NCMOH)nanosheets(NSs)on the Ag-deposited nickel foam and carbon cloth(i.e.,Ag/NF and Ag/CC)substrates.Moreover,the formation and charge storage mechanism of Ag are described,and these contribute to good conductive and redox chemistry features.The switching architectural integrity of metal and redox materials on metallic frames may significantly boost charge storage and rate performance with noticeable drop in resistance.The as-fabricated Ag@CFOH@NCMOH/NF electrode delivered superior areal capacity value of 2081.9μA h cm^(-2)at 5 mA cm^(-2).Moreover,as-assembled hybrid cell based on NF(HC/NF)device exhibited remarkable areal capacity value of 1.82 mA h cm^(-2)at 5 mA cm^(-2)with excellent rate capability of 74.77%even at 70 mA cm^(-2)Furthermore,HC/NF device achieved maximum energy and power densities of 1.39 mW h cm^(-2)and 42.35 mW cm^(-2),respectively.To verify practical applicability,both devices were also tested to serve as a self-charging station for various portable electronic devices.

关键词： Current collectors Redox-active silver Transition metal-hydroxides Electrochemical performance Hybrid supercapacitor

A nano-plasmonic HMIM waveguide based concurrent dual-band BPF using circular ring resonator

在线全文

学校读者我要写书评

暂无评论

Optoelectronics Letters 2024年第3期20卷 152-156页

作者： Miriyala Sridhar Surendra Kumar Bitra TS N Murthy Koppireddi Padmaraju department of electronics and Communication Engineering Koneru Lakshmaiah Education FoundationGunturIndia Astra Microwave Products Ltd. HyderabadIndia department of electronics and Communication Engineering JNTU-GV College of EngineeringVizianagaramIndia department of electronics and Communication Engineering Jawaharlal Nehru Technological University KakinadaKakinadaIndia

This article analyzes the transmission line characteristics of plasmonic hybrid metal insulator metal(HMIM) wave-guide, circular ring resonator(CRR) based dual-band band-pass filters with two transmission poles in both pass-bands in the optical regime using coupled line feed. The transmission line characteristics of an HMIM waveguide, such as characteristic impedance(Z_(PV)), effective refractive index(n_(eff)) and propagation length(L_(spp)), have been obtained by using full wave simulation.

关键词： waveguide resonator circular

Improved Energy Management Strategy for Prosumer Buildings with Renewable Energy Sources and Battery Energy Storage Systems

在线全文

学校读者我要写书评

暂无评论

Journal of Modern Power Systems and Clean Energy 2024年第2期12卷 381-392页

作者： Pavitra Sharma Krishna Kumar Saini Hitesh Datt Mathur Puneet Mishra department of Electrical&electronics Engineering Birla Institute of Technology&SciencePilaniIndia IEEE

The concept of utilizing microgrids(MGs)to convert buildings into prosumers is gaining massive popularity because of its economic and environmental benefits.These pro-sumer buildings consist of renewable energy sources and usually install battery energy storage systems(BESSs)to deal with the uncertain nature of renewable energy sources.However,because of the high capital investment of BESS and the limitation of available energy,there is a need for an effective energy management strategy for prosumer buildings that maximizes the profit of building owner and increases the operating life span of BESS.In this regard,this paper proposes an improved energy management strategy(IEMS)for the prosumer building to minimize the operating cost of MG and degradation factor of BESS.Moreover,to estimate the practical operating life span of BESS,this paper utilizes a non-linear battery degradation model.In addition,a flexible load shifting(FLS)scheme is also developed and integrated into the proposed strategy to further improve its performance.The proposed strategy is tested for the real-time annual data of a grid-tied solar photovoltaic(PV)and BESS-powered AC-DC hybrid MG installed at a commercial building.Moreover,the scenario reduction technique is used to handle the uncertainty associated with generation and load demand.To validate the performance of the proposed strategy,the results of IEMS are compared with the well-established energy management strategies.The simulation results verify that the proposed strategy substantially increases the profit of the building owner and operating life span of BESS.Moreover,FLS enhances the performance of IEMS by further improving the financial profit of MG owner and the life span of BESS,thus making the operation of prosumer building more economical and efficient.

关键词： Prosumer building battery energy storage system(BESS) battery degradation factor demand response energy management microgrid solar photovoltaic(PV)system

Performance Improvement of Multiband Triangular Microstrip Patch Antenna Using Frequency Selective Surface

在线全文

学校读者我要写书评

暂无评论

Journal of Shanghai Jiaotong university(Science) 2024年第2期29卷 316-321页

作者： MAHENDRAN Krishnakumar GAYATHRI Rajaraman department of electronics and Communication Engineering Annamalai UniversityChidambaram 608002India

Today's antennas have to operate in multiple resonant frequencies to satisfy the need of recent advances in communication technologies.This paper presents split ring resonator based triangular multiband antenna whose antenna performance is enhanced with the help of frequency selective surfaces(FSSs).The antenna has multiple resonances at S,C,and X bands.An array of 4×3 crisscross-shaped unit cells are arranged to form the FSS layer.The antenna is fed with a microstrip line feeding technique.The proposed antenna operates at 3.5 GHz,4.1 GHz,5.5GHz,9.4GHz,and 9.8 GHz with a better return loss and gain.Simulated and measured results yield a good match.

关键词： triangular microstrip antenna split ring resonator frequency selective surface(FSS) metamaterial

The Impact of Network Topologies and Radio Duty Cycle Mechanisms on the RPL Routing Protocol Power Consumption

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Computers, Materials & Continua 2024年第5期79卷 1835-1854页

作者： Amal Hkiri Hamzah Faraj Omar Ben Bahri Mouna Karmani Sami Alqurashi Mohsen Machhout Physic department Electronics and Micro-Electronics LaboratoryFaculty of Sciences of MonastirMonastir5000Tunisia department of Science and Technology College of RanyahTaif UniversityP.O.Box 11099Taif21944Saudi Arabia

The Internet of Things(IoT)has witnessed a significant surge in adoption,particularly through the utilization of Wireless Sensor Networks(WSNs),which comprise small internet-connected devices.These deployments span various environments and offer a multitude of benefits.However,the widespread use of battery-powered devices introduces challenges due to their limited hardware resources and communication capabilities.In response to this,the Internet Engineering Task Force(IETF)has developed the IPv6 Routing Protocol for Low-power and Lossy Networks(RPL)to address the unique requirements of such networks.Recognizing the critical role of RPL in maintaining high performance,this paper proposes a novel approach to optimizing power consumption.Specifically,it introduces a developed sensor motes topology integrated with a Radio Duty Cycling(RDC)mechanism aimed at minimizing power usage.Through rigorous analysis,the paper evaluates the power efficiency of this approach through several simulations conducted across different network topologies,including random,linear,tree,and elliptical topologies.Additionally,three distinct RDC mechanisms—CXMAC,ContikiMAC,and NullRDC—are investigated to assess their impact on power consumption.The findings of the study,based on a comprehensive and deep analysis of the simulated results,highlight the efficiency of ContikiMAC in power conservation.This research contributes valuable insights into enhancing the energy efficiency of RPL-based IoT networks,ultimately facilitating their widespread deployment and usability in diverse environments.

关键词： WSN IoT radio duty cycles topologies

RPL-Based IoT Networks under Decreased Rank Attack:Performance Analysis in Static and Mobile Environments

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Computers, Materials & Continua 2024年第1期78卷 227-247页

作者： Amal Hkiri Mouna Karmani Omar Ben Bahri Ahmed Mohammed Murayr Fawaz Hassan Alasmari Mohsen Machhout Physic department Electronics and Micro-Electronics LaboratoryFaculty of Sciences of MonastirMonastir5000Tunisia department of Science and Technology College of RanyahTaif UniversityP.O.Box 11099Taif21944Saudi Arabia

The RPL(IPv6 Routing Protocol for Low-Power and Lossy Networks)protocol is essential for efficient communi-cation within the Internet of Things(IoT)ecosystem.Despite its significance,RPL’s susceptibility to attacks remains a concern.This paper presents a comprehensive simulation-based analysis of the RPL protocol’s vulnerability to the decreased rank attack in both static andmobilenetwork environments.We employ the Random Direction Mobility Model(RDM)for mobile scenarios within the Cooja simulator.Our systematic evaluation focuses on critical performance metrics,including Packet Delivery Ratio(PDR),Average End to End Delay(AE2ED),throughput,Expected Transmission Count(ETX),and Average Power Consumption(APC).Our findings illuminate the disruptive impact of this attack on the routing hierarchy,resulting in decreased PDR and throughput,increased AE2ED,ETX,and APC.These results underscore the urgent need for robust security measures to protect RPL-based IoT networks.Furthermore,our study emphasizes the exacerbated impact of the attack in mobile scenarios,highlighting the evolving security requirements of IoT networks.

关键词： RPL decreased rank attacks mobility random direction model

Realization of 16 Gbit/s all-optical Toggle memory utilizing change in polarization state of light in single-mode optical fiber

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Optoelectronics Letters 2024年第2期20卷 76-82页

作者： Dipti Bansal Lovkesh department of electronics&Communication Engineering Punjabi UniversityPatiala 147002India1

In this investigation,all-optical Toggle flip-flop event-driven memory is explored with data rate of 16 Gbit/s.Single mode optical fiber model is used as a nonlinear medium to generate the output set and reset pulses of a Toggle flip-flop,and the model is based on the bidirectional optical transmission principle,considering the fundamental effects of cross phase modulation and self-phase modulation with change in polarization state.The performance of a flip-flop is evaluated using truth table conditions and performance parameters such as Q factor,which is obtained as 380.92 d B for Q and 272.9 d B for■,and rising and falling times of 7.304 ps and 5.79 ps,respectively are obtained,which makes flip-flop design fast as compared to earlier design techniques.

关键词： Gbit/s polarization optical