检索结果-南通市图书馆

Magnesium-containing pellet regulating blast furnace ferrous burden interaction:softening-melting behavior and mechanism

引用

Journal of Iron and Steel Research International 2024年第7期31卷 1623-1635页

作者： Li-ming Ma Jian-liang Zhang Yao-zu Wang Xiao-yong Ma Gui-lin Wang Zhuo Li Hui-qing Jiang Zheng-jian Liu School of metallurgical and Ecological engineering University of Science and Technology BeijingBeijing 100083China School of Intelligence science and Technology University of Science and Technology BeijingBeijing 100083China Lingyuan Iron and Steel Group Co. Lingyuan 122500LiaoningChina

MgO participates in all stages of sintering,pelletizing,and blast furnace ironmaking,and synergistically optimizing the distribution of MgO in ferrous burden can effectively enhance the interaction within the ferrous burdens and optimize the softening-melting properties of the mixed ***-containing pellets mixed with low-MgO sinter or mixed with high-MgO sinter in the blast furnace ferrous burden structure have opposite softening-melting performance *** the structure of the ferrous burden is magnesium-containing pellets mixed with low-MgO sinter,the magnesium-containing pellets can enhance the interaction of the ferrous burden in the process of softening-melting,which can optimize the composition of the slag phase and improve the slag *** the structure of the ferrous burden is magnesium-containing pellets mixed with high-MgO sinter,the magnesium-containing pellets weaken the interaction of the ferrous burden in the process of softening-melting,increase the content of the high melting point solid-phase particles in the slag,lead to an increase in the viscosity of the slag and difficult separation of the slag and iron,and decrease the permeability of the charge ***,to ensure good permeability of the mixed burden,the following measures are suggested:optimizing the MgO distribution of the ferrous burden,reducing the MgO content of the sinter to 1.96 wt.%,increasing the MgO content of the pellets to 1.03-1.30 wt.%,controlling the MgO/Al_(2)O_(3) ratio of the mixed burden within 1.15-1.32,narrowing the position of the cohesive zone,and maintaining an S value(permeability index)of approximately 150 kPa℃.

关键词： Ironmaking Ferrous burden Softening-melting property Interaction Permeability Slag

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

High-temperature elemental segregation induced structure degradation in high-entropy fluorite oxide

引用

Journal of Advanced Ceramics 2024年第3期13卷 310-322页

作者： Yixuan Hu Mariappan Anandkumar Yumeng Zhang Joydip Joardar Atul Suresh Deshpande Xiaodong Wang Kolan Madhav Reddy School of Materials science and engineering Shanghai Jiao Tong UniversityShanghai 200240China Department of Materials science and metallurgical engineering Indian Institute of Technology HyderabadSangareddy 502285India International Advanced Research Centre for Powder Metallurgy and New Materials(ARCI) Hyderabad 500005India

Fluorite-structured oxides constitute an important category of oxides with a wide range of high-temperature *** the concept of high entropy,high-entropy fluorite oxides(HEFOs)have showcased intriguing high-temperature application ***,unlocking this potential necessitates an assessment of their long-term stability under high-temperature *** this study,we conducted a prolonged heat treatment at 1000℃on typical HEFO,specifically(CeHfZrGdLa)O_(x).After 100 h,high-intensity X-ray diffraction(XRD)revealed a transition from a single-phase fluorite to a multi-phase *** investigation by analytical electron microscoy(AEM)demonstrated that this degradation resulted from facilitated element diffusion and consequent escalating chemical fluctuation at high temperatures,leading to spontaneous segregation and separation of Ce and La elements,forming Ce-rich,La-poor,and La-rich ***,the La-rich phase spontaneously transformed from a fluorite structure(space group Fm3m)to a bixbyite structure(space group Ia3)at elevated temperatures,resulting in the appearance of superstructure reflection in XRD profiles and electron diffraction *** the intricate phase decomposition,the energy band gap showed minimal variation,suggesting potential property stability of(CeHfZrGdLa)O_(x)across a broad range of *** findings offer valuable insights into the future applications of HEFOs.

关键词： phase transition high-temperature stability elemental segregation high-entropy fluorite oxides(HEFOs)

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Non-equilibrium kinetic separation of thulium,yttrium and erbium on the surface of freely rising oil droplets

引用

Journal of Rare Earths 2024年第1期42卷 200-209,I0007页

作者： Na Sui Shukai Miao Kaihui Cui Fancheng Meng Kun Huang School of metallurgical and Ecological engineering University of Science and Technology BeijingBeijing100083China Beijing Key lab.ratory of Green Recovery and Extraction of Rare and Precious Metals University of Science and Technology BeijingBeijing100083China Key lab.ratory of Green Process and engineering Institute of Process EngineeringChinese Academy of SciencesBeijing100190China

It is difficult to achieve selective separation and enrichment of different rare earths from high abundance yttrium ores efficiently only dependent on their discrepancy in thermodynamic *** present work suggests a new strategy based on non-equilibrium kinetic separation of Er and Tm on the surface of freely rising oil droplets to control the separation order of *** is revealed that the mutual separation of Er/Tm is significantly promoted with the separation coefficient of 2.89 during the non-equilibrium extraction with the addition of diethylenetriaminepentaacetic acid(DTPA).The extraction sequence of Tm,Er and Y can be controlled as Tm>Y>Er,thus Y can be selectively enriched during the process of separation of Er and Tm,Such a sequence is subject to the controllab.e dissociation rates of RE(Ⅲ)-DTPA complexes and extraction abilities of P507 with the three RE(Ⅲ)*** dissociation rate is dependent on the stabilities of RE(Ⅲ)-DTPA complexes and follows the sequence ofY(Ⅲ)—DTPA Er>Y to Tm>Y>Er.

关键词： DTPA Interface interaction Non-equilibrium kinetic separation Rare earths P507

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Polymeric hollow fiber membrane for cooling crystallization seeding:On the mechanism of induced nucleation based on thermal transfer Author links open overlay panel

引用

Particuology 2024年第8期91卷 38-49页

作者： Zeman He Shaofu Du Guanying Shao Peiyu Li Lei Sheng Gaohong He Xiaobin Jiang Wu Xiao State Key lab.ratory of Fine Chemicals School of Chemical EngineeringEngineering Laboratory for Petrochemical Energy-efficient Separation Technology of Liaoning ProvinceDalian University of TechnologyDalian 116024China

Cooling crystallization is an important separation process and particuology technology that requires accurate nucleation control ***,we introduced the polymeric hollow fiber membrane with proper thermal properties as the effective nucleation induction interface during cooling *** heterogeneous nucleation control mechanism was introduced based on classical nucleation theory and the thermal transfer *** properties and the thermal conductivity of two kinds of polymeric membranes,polytetrafluoroethylene(PTFE)and polyethersulfone(PES),were measured and simulated with the developed *** two membranes possessed different nucleation induction periods,nucleation rates and crystallization performances,which validated that the hollow fiber membrane module could effectively accelerate the nucleation process compared to conventional cooling crystallization owing to the shorter nucleation induction period and the reduced solution surface *** to the higher hydrophobicity and the lower roughness of the membrane surface,the PTFE membrane possessed a more moderate performance in generating stable heterogeneous nucleation than the one of PES ***,the adjustable membrane property enabled the hollow fiber membrane-assisted cooling crystallization to possess the accurate nucleation control and desired terminal particle products.

关键词： Cooling crystallization Nucleation Particle process Hollow fiber membrane Induction period Process control

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Industrial application of the technique of removing Mo by a combination of moving packed bed and fluidized bed ion exchange

引用

Rare Metals 2003年第2期22卷 81-85页

作者： XIAO Liansheng, ZHANG Qixiu, GONG Bofan, and HUANG Shaoyingmetallurgical separation science and engineering lab., Central South University, Changsha 410083, China (Received 2002-05-08) metallurgical separation science and engineering lab. Central South University Changsha 410083

The application of the technique of removing molybdenum by moving packed bedand fluidized bed ion-exchange in a factory was described. The data showed that the Mo removalefficiency is above 99 percent, and the Mo content in APT (Ammonium Paratungstate) is controlledsteadily below 18 X l0^(-6), in the case of treating the feed liquor containing Mo 1.4 g/L. Thetechnique is simple and convenient in operation, good reusability of resin, loss consumption ofdesorption reagent and little pollution on environment. The loss of tungsten is less than 0.5percent. The technique bas been proved to be an economical and efficient process for Mo removal.

关键词： non-ferrous metallurgy separation ion-exchange moving packed bed fluid bed molybdenum tungsten.

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Electrodeposition of Copper by IMPC Method

引用

Journal of Central South University 2000年第4期12卷 186-190页

作者： ZHOU Kang gen,LI Qing gang,ZHANG Qi xiu (metallurgical separation science and engineering lab., Central South University, Changsha 410083, China) metallurgical separation science and engineering lab. Central South University Changsha China

In order to develop an energy saving electrodeposition process of copper, the electrodeposition of copper in copper sulfate solution by the ion exchange membrane primary cell (IMPC) method has been studied. The experiments were carried out in an ion exchange membrane primary cell with dimensions of 200 mm in length, 52 mm in width and 90 mm in height. The influences of temperature(294 323 K), interval between the anode and cathode (1.5 3.5 cm), mass concentrations of Cu 2+ (6 40 g/L), H 2SO 4(0 120 g/L) and Fe 3+ (3 9 g/L) in catholyte and solution flow rate (0 8 cm/s) on current density and current efficiency were investigated experimentally. The current density increases with the increase of temperature and concentrations of Cu 2+ and H 2SO 4 in catholyte. Cathode current efficiency decreases with the increase of concentration of Fe 3+ in catholyte and anode current efficiency decreases with the increase of temperature. The high quality cathodic copper can be obtained and the current density of membrane can be higher than 150 A/m 2 and the current density of cathode can be higher than 300 A/m 2. The experiment results show that IMPC method is effective for electrodeposition of copper.

关键词： ion exchange membrane primary cell copper electrodeposition

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Study on Removing Zinc from Nickel Electrolyte by Ion-exchange

引用

Journal of Central South University 2000年第4期12卷 194-197页

作者： ZHANG Gui-qing ZHANG Qi-xiu XIAO Lian-sheng GONG Bo-fan metallurgical separation science and engineering lab. Central South UniversityChangsha 410083China

In the process of nickel production by diaphragm electrolysis, the quality of the product has been tremendously affected by the content of zinc in the nickel electrolyte. Removing zinc from nickel electrolyte by ion-exchange is studied in the paper. Resin D201 is selected as the resin for zinc removing. Effects of the operative parameters, such as temperature, pH value and the contact time on zinc adsorption are observed and the desorption feature of the zinc-loaded resin is inspected. The results show that macroporous anion-exchange resin D201 has excellent adsorption and desorption properties. Its breakthrough capacity and saturation capacity in zinc adsorption reach 0.81 g/L of zinc and 1.16 g/L of zinc respectively, when the operative temperature is 60 °C and the contact time is only 5 min. In addition, compared with gel type IER 201 × 7 used industrially nowadays, this resin has better wearability and greater intensity.

关键词： zinc removal nickel electrolyte ion-exchange

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

MIBK Removal from Aqueous Solution by Aeration method

引用

Journal of Central South University 2000年第4期12卷 182-185页

作者： LI Qing-gang ZHOU Kang-gen ZHANG Qi-xiu metallurgical separation science and engineering lab. Central South UniversityChangsha 410083China

In order to develop an effective MIBK removal method of H 2TaF 7 solution in tantalum extraction process, MIBK removal from aqueous solution by the aeration method was investigated by using an aeration column with the dimensions of 78 mm in inner diameter and 1 100 mm in length. The effects of aeration conditions on aerating efficiency were investigated in the ranges of temperature 303 333 K, airflow rate 50 300 L/h,volume of solution 1 600 3 200 mL. Aerating efficiency increases with the increase of temperature and airflow rate. MIBK in aqueous solution can be removed from 0.058 mol/L to 0.002 mol/L at 50 ℃,airflow rate 200 L/h, volume of solution 2 400 mL and aeration time 1h. The experimental results show that MIBK can be removed effectively from aqueous solution by the aeration method.

关键词： tantalum niobium MIBK removal aeration method

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Study on the Removal of MIBK from Aqueous Solution by Vacuum Membrane Distillation

引用

Journal of Central South University 2000年第4期12卷 178-181页

作者： TANG Jian-jun ZHOU Kang-gen ZHANG Qi-xiu LI Qing-gang metallurgical separation science and engineering lab. Central South UniversityChangsha 410083China

Methyl isobutyl ketone(MIBK) is widely used as extraction agent in hydrometallurgy. As it has a definite solubility in water, so when using MIBK as extraction agent, there will be MIBK in stripping solutions inevitably, which not only pollutes working conditions, but also affects the quality of ultimate product. In order to remove MIBK from aqueous solutions, the means of flat vacuum membrane distillation(VMD) is studied in the paper. The area of the membrane used in the study is 0.02 m 2, the initial volume of feed is 2 L, each experiment was conducted over a time period of 60 120 min. The influences of the factors such as temperature(34.8 55.0 ℃); pressure in the permeate side(10.67 14.67 kPa) and feed flow rate(27.8 69.4 mL/s) were experimentally studied. Increasing the temperature or reducing the pressure in the permeate side results in a faster removal of MIBK; however there is a decrease in removal factor β , increasing the feed flow rate results in a faster removal of MIBK and an increase of removal factor β , especially in the range of lower flow rate. The study indicates that the aim of MIBK removal and recycle from dilute aqueous solutions can be achieved by VMD.

关键词： vacuum membrane distillation methyl isobutyl ketone removal

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Modulating charge separation and transfer for high-performance photoelectrodes via built-in electric field

引用

International Journal of Minerals,Metallurgy and Materials 2024年第5期31卷 1126-1146页

作者： Houyan Cheng Peng Liu Yuntao Cui Ru Ya Yuxiang Hu Jinshu Wang Key lab.ratory of Advanced Functional Materials of Education Ministry of China Faculty of Engineering and ManufacturingBeijing University of TechnologyBeijing 100124China Key lab.ratory of Cryogenic science and Technology and Beijing Key lab.of Cryo-Biomedical engineering Technical Institute of Physics and ChemistryChinese Academy of SciencesBeijing 100190China Inner Mongolia Academy of science and Technology Hohhot 010020China

Constructing a built-in electric field has emerged as a key strategy for enhancing charge separation and transfer,thereby improving photoelectrochemical ***,considerable efforts have been devoted to this *** review systematically summarizes the impact of built-in electric fields on enhancing charge separation and transfer mechanisms,focusing on the modulation of built-in electric fields in terms of depth and ***,mechanisms and tuning strategies for built-in electric fields are ***,the state-of-the-art works regarding built-in electric fields for modulating charge separation and transfer are summarized and categorized according to surface and interface ***,current strategies for constructing bulk built-in electric fields in photoelectrodes are explored,and insights into future developments for enhancing charge separation and transfer in high-performance photoelectrochemical applications are provided.

关键词： photoelectrochemical water splitting bulk built-in electric field cation intercalation charge separation and transfer

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

欢迎您,

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

请选择保存的检索档案：

请选择收藏分类：

通借通还

欢迎您,

建议与咨询 留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

请选择保存的检索档案： 新增检索档案 确定 取消

请选择收藏分类： 新增自定义分类 确定 取消

通借通还

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

请选择保存的检索档案：

请选择收藏分类：