检索结果-南通市图书馆

Cleaner production of 3.5 valent vanadium electrolyte from ammonium metavanadate by ammonia reduction-sulfuric acid dissolution method

在线全文

学校读者我要写书评

暂无评论

Tungsten 2024年第3期6卷 555-560页

作者： Cheng Wang Lan-Jie Li Hao Du College of Chemical Engineering University of Chinese Academy of Sciences institute of process Engineering National Engineering Research Center of Green Recycling for Strategic Metal Resources Chinese Academy of Sciences Hesteel Group Company Limited

The vanadium redox flow battery(VRFB) has been widely used in large-scale energy storage areas due to the advantages of long lifespan and high safety. However, the high preparation cost of vanadium electrolyte limits ... 详细信息

关键词： Ammonia

Effect of heat treatment on microstructural evolution,mechanical properties and tribological properties of H13 steel prepared using selective laser melting

在线全文

同方期刊数据库

学校读者我要写书评

暂无评论

Journal of Iron and Steel research International 2024年第5期31卷 1246-1259页

作者： Li-xiong Han Yan Wang Shi-feng Liu Zhao-hui Zhang Wei Liu Xin Yang Dang-shen Ma Jian Zhou Ying-kang Wei College of metallurgical Engineering Xi’an University of Architecture and TechnologyXi’an710055ShaanxiChina Zhejiang University City College Hangzhou310015ZhejiangChina China Iron and Steel research institute Group Co. Ltd.Beijing100081China

H13 tool steel was successfully prepared by selective laser melting(SLM)*** effects of heat treatment on the microstructure,mechanical properties,and tribological properties of SLMed H13 steel were *** heat treatment process involved a solution treatment and a double aging treatment of the deposited H13 tool steel prepared by *** aim is to optimize the microstructure and mechanical properties of SLMed H13 *** to the rapid heating and cooling effects of SLM,carbide precipitation in the deposited H13 steel was not uniform and residual stresses were *** purpose of the solution treatment is to dissolve the solution at a high temperature to eliminate the residual stresses and defects introduced by the SLM-forming *** solution treatment and first aging treatment produced the precipitation of small carbides at the grain boundaries and inside the crystals,which increased the hardness of SLMed H13 *** hardness increased from 538±4.0 HV of the as-deposited sample to 548±5.8 HV of samples after the first aging ***,the ultimate tensile strength and the elongation at break decreased from 1882 MPa and 11.5%in the as-deposited sample to 1697 MPa and 7.9%in those after the first aging treatment,***,the friction coefficient and wear rate in the as-deposited sample decreased from 0.5160 and 2.36×10^(–6)mm^(−3)N^(−1)m^(−1)to 0.4244 and 1.04×10^(–6)mm^(−3)N^(−1)m^(−1),***,the distribution of carbides inside the crystals was not *** second aging treatment adjusted the morphology of carbide precipitation and made it more uniform,but the precipitation of carbides grew and settled at the bottom of the grain *** hardness decreased to 533±6.7 HV compared with that with the first aging treatment,but the ultimate tensile strength and plasticity reached a balance(1807 MPa,14.05%).Accordingly,the friction coefficient and wear rate also showed a stable and decreasin

关键词： Selective laser melting H13 steel Solution aging Double aging Friction and wear Retained austenite

Towards high-performance and robust anion exchange membranes(AEMs)for water electrolysis:Super-acid-catalyzed synthesis of AEMs

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Journal of Energy Chemistry 2024年第6期93卷 478-510,I0012页

作者： Geun Woong Ryoo Sun Hwa Park Ki Chang Kwon Jong Hun Kang Ho Won Jang Min Sang Kwon Department of Materials Science and Engineering Research Institute of Advanced Materials(RIAM)Seoul National UniversitySeoul 08826Republic of Korea Interdisciplinary Materials Measurement institute Korea Research Institute of Standards and Science(KRISS)Daejeon 34113Republic of Korea Department of Chemical and Biological Engineering and Institute of Chemical ProcessSeoul National UniversitySeoul 08826Republic of Korea Department of Applied Measurement Science University of Science and TechnologyDaejeon 34113Republic of Korea

The increasing demand for hydrogen energy to address environmental issues and achieve carbon neutrality has elevated interest in green hydrogen production,which does not rely on fossil *** various hydrogen production technologies,anion exchange membrane water electrolyzer(AEMWE)has emerged as a next-generation technology known for its high hydrogen production efficiency and its ability to use non-metal ***,this technology faces significant challenges,particularly in terms of the membrane durability and low ionic *** address these challenges,research efforts have focused on developing membranes with a new backbone structure and anion exchange groups to enhance durability and ionic ***,the super-acid-catalyzed condensation(SACC)synthesis method stands out due to its user convenience,the ability to create high molecular weight(MW)polymers,and the use of oxygen-tolerant organic *** the synthesis of anion exchange membranes(AEMs)using the SACC method began in 2015,and despite growing interest in this synthesis approach,there remains a scarcity of review papers focusing on AEMs synthesized using the SACC *** review covers the basics of SACC synthesis,presents various polymers synthesized using this method,and summarizes the development of these polymers,particularly their building blocks including aryl,ketone,and anion exchange *** systematically describe the effects of changes in the molecular structure of each polymer component,conducted by various research groups,on the mechanical properties,conductivity,and operational stability of the *** review will provide insights into the development of AEMs with superior performance and operational stability suitable for water electrolysis applications.

关键词： Green hydrogen production Water electrolysis Anion exchange membrane water electrolyzer(AEMWE) Anion exchange membranes(AEMs) Super-acid-catalyzed condensation(SACC)

Effect of Al content on modification behavior of non-metallic inclusions in high-strength steel treated with rare earth

在线全文

学校读者我要写书评

暂无评论

Journal of Iron and Steel research International 2024年第8期31卷 1886-1899页

作者： Zhan-peng Tie Xue-yuan Jiang Hai-yan Tang ·Gen Li Yu-hang Wang Jia-quan Zhang School of metallurgical and Ecological Engineering University of Science and Technology BeijingBeijing 100083China Continuous Casting Business Section CISDI Engineering Co.Ltd.Chongqing 401122China Special Steel institute Central Iron and Steel Research Institute Co.Ltd.Beijing 100081China

The influence of Al content(0.0053,0.0171,and 0.0578 wt.%)on the modification behavior of non-metallic inclusions in 20CrMoVTiB steel treated with rare earth elements was studied through high-temperature experiments and thermodynamic *** results showed that the modification products varied with the Al content in steel under 0.01 wt.%of Ce *** formation sequence of typical rare earth inclusions in steel with the increase in Al content was Ce_(2)O_(3)→CeAlO_(3)→CeAl_(11)O_(18),and the final stable products were highly Al content *** the Al content was 0.0053 wt.%,the stable phase in steel was Ce2O3;while the[Al]reached 0.0171 wt.%,the stable phase became CeA1O_(3).As the A1 content reached 0.0578 wt.%,CeAl_(11)O_(18) became the stable *** a result,increasing the Al content could inhibit the precipitation of Ce_(2)O_(3) inclusions in steel while promote the formation of CeAIO3 and CeAl_(11)O_(18) *** addition,both Ca treatment and Ce treatment could effectively refine the size of inclusions in steel by changing their ***,the feeding amount of Ca wire into molten steel should be appropriately reduced under the condition of adding Ce simultaneously,which is expected to be beneficial for an improved Ce treatment effect.

关键词： Rare earth Al content Steel Inclusion Thermodynamics Ca treatment

Mn-modified nitrogen-doped Pt-based electrocatalyst for efficient oxygen reduction in aluminum-air batteries

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Nano research 2024年第8期17卷 7126-7135页

作者： Li Gao Yang Song Xuebing Xu Chang Li Chaoquan Hu State Key Laboratory of Mesoscience and Engineering Institute of Process EngineeringChinese Academy of SciencesBeijing 100190China Zhongke Nanjing institute of Green Manufacturing Industry Nanjing 211135China

In this study,a Mn-modified Pt-based catalyst loaded on nitrogen-doped Ketjen black(Mn-Pt/NKB)is prepared using a simple ethylene glycol reduction *** size of Pt nanoparticles(NPs)is effectively controlled by doping with Mn and *** the smallest average particle size of 1.7 nm,Mn-Pt/NKB demonstrates half-wave potentials of 0.890 and 0.688 V in the alkaline and neutral electrolytes,respectively,which are superior to those of commercial platinum on activated carbon(Pt/C).When applied as an air cathode in aluminum-air battery,it exhibits ultra-high power densities of 190(alkaline)and 26.2 mW·cm^(−2)(neutral).Moreover,the voltage remains stable after 5 h of *** practical application performance of the Mn-Pt/NKB catalyst in an aluminum-air battery is better than that of commercial Pt/***,the oxygen reduction reaction(ORR)mechanism on surfaces with different particle sizes is analyzed using density functional *** cracking is the major pathway on the surface of the small particles with lower energy consumption of 0.5 eV,while water molecule cleavage is the major pathway on the surface of the large particles with higher energy consumption of 0.97 *** lower energy consumption of the oxygen cracking pathway further confirms the ORR mechanism for higher activity on small-sized *** study provides a direction for the rational design of Pt-based catalysts for ORR and sheds light on the commercial development of aluminum-air batteries.

关键词： oxygen reduction reaction precious metal catalysts aluminum-air battery density functional theory(DFT)calculations reaction pathway

Oxidation behavior of low-grade vanadiferous titanomagnetite concentrate with high titanium

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Journal of Iron and Steel research International 2024年第2期31卷 329-341页

作者： Jin-sheng Liu Zhen-xing Xing Gong-jin Cheng Xue-yong Ding Xiang-xin Xue School of Metallurgy Northeastern UniversityShenyang110819LiaoningChina Liaoning Key Laboratory of Recycling Science for metallurgical Resources Shenyang110819LiaoningChina Innovation research institute of Vanadium and Titanium Resource Industry Technology Northeastern UniversityShenyang110819LiaoningChina

In order to clarify the oxidation mechanisms and make better use of the low-grade vanadiferous titanomagnetite concentrate with high titanium(LVTC),the oxidation behavior of LVTC was *** results showed that oxidation degree was achieved within 90 min when temperature was not lower than 700°C,and the main phases of the oxidized LVTC consisted of Fe9TiO15,Fe2O3,CaSiTiO5 and a small amount of *** temperature is favorable to the formation of *** surface of LVTC gradually becomes rough,with fine particles of needle-like and granular shape appearing on the surface,which finally turn from laminar to creamy,spread out,and are interspersed with many tiny *** phase oxidation paths in LVTC were as follows:(1)Fe2.75Ti0.25O4→Fe9TiO15+Fe2O3;(2)Fe2.75Ti0.25O4→Fe2O3+FeTiO3→Fe2TiO5;(3)FeTiO3→Fe2O3+Fe2Ti3O9→*** is predominantly mesoporous whether oxidized or not,with the pores mainly distributed in the range of 2–40 nm,and the specific surface area of LVTC decreases significantly with increasing temperature.

关键词： Low-grade vanadiferous titanomagnetite concentrate Oxidation degree Phase transformation Micromorphology Oxidation path Pore structure

Economic Risk Assessment of Future Debris Flows by Machine Learning Method

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

International Journal of Disaster Risk Science 2024年第1期15卷 149-164页

作者： Chenchen Qiu Lijun Su Alessandro Pasuto Giulia Bossi Xueyu Geng School of Engineering University of WarwickCoventry CV47ALUK Key Laboratory of Mountain Hazards and Earth Surface process Institute of Mountain Hazards and EnvironmentChinese Academy of SciencesChengdu 610041China research institute for Geo-Hydrological Protection(IRPI-CNR) National Research Council of ItalyPadova 35127Italy

A reliable economic risk map is critical for effective debris-flow ***,the uncertainties surrounding future scenarios in debris-flow frequency and magnitude restrict its *** estimate the economic risks caused by future debris flows,a machine learning-based method was proposed to generate an economic risk map by multiplying a debris-flow hazard map and an economic vulnerability *** selected the Gyirong Zangbo Basin as the study area because frequent severe debris flows impact the area every *** debris-flow hazard map was developed through the multiplication of the annual probability of spatial impact,temporal probability,and annual *** employed a hybrid machine learning model-certainty factor-genetic algorithm-support vector classification-to calculate ***,a Poisson model was applied for temporal probabilities,while the determination of annual probability of spatial impact relied on statistical ***,four major elements at risk were selected for the generation of an economic loss map:roads,vegetation-covered land,residential buildings,and *** economic loss of elements at risk was calculated based on physical vulnerabilities and their economic ***,we proposed a physical vulnerability matrix for residential buildings,factoring in impact pressure on buildings and their horizontal distance and vertical distance to debrisflow *** this context,an ensemble model(XGBoost) was used to predict debris-flow volumes to calculate impact pressures on *** results show that residential buildings occupy 76.7% of the total economic risk,while roadcovered areas contribute approximately 6.85%.Vegetation-covered land and farmland collectively represent 16.45% of the entire *** findings can provide a scientific support for the effective mitigation of future debris flows.

关键词： Economic risk Future debris fows Gyirong Zangbo Basin Machine learning model Physical vulnerability matrix Southwest Tibet,China

A Web-like Three-dimensional Binder for Silicon Anode in Lithium-ion Batteries

在线全文

学校读者我要写书评

暂无评论

Energy & Environmental Materials 2024年第1期7卷 21-27页

作者： Liyuan Li Tao Li Yifan Sha Baozeng Ren Lan Zhang Suojiang Zhang CAS Key Laboratory of Green process and Engineering Beijing Key Laboratory of Ionic Liquids Clean ProcessState Key Laboratory of Multiphase Complex SystemsInstitute of Process EngineeringChinese Academy of SciencesBeijing 100190China School of Chemical Engineering Zhengzhou UniversityZhengzhou 450001China Langfang Green Industrial Technology Center Langfang 065001China Henan Key Laboratory of Energy Storage Materials and processes Zhengzhou Institute of Emerging Industrial TechnologyZhengzhou 450003China

Si anode is of paramount importance for advanced energy-dense lithium-ion batteries(LIBs).However,the large volume change as well as stress generates during its lithiation-delithiation process poses a great challenge to the long-term cycling and hindering its *** this work,a composite binder is prepared with a soft component,guar gum(GG),and a rigid linear polymer,anionic polyacrylamide(APAM).Rich hydroxy,carboxyl,and amide groups on the polymer chains not only enable intermolecular crosslinking to form a web-like binder,A2G1,but also realize strong chemical binding as well as physical encapsulating to Si *** resultant electrode shows limited thickness change of merely 9%on lithiation and almost recovers its original thickness on *** demonstrates high reversible capacity of 2104.3 mAh g^(-1)after 100 cycles at a current density of 1800 mA g^(-1),and in constant capacity(1000 mAh g^(-1))test,it also shows a long life of 392 ***,this soft-hard combining web-like binder illustrates its great potential in the future applications.

关键词： anionic polyacrylamide lithium-ion batteries Si anode thickness change web-like binder

Mechanism of slag pellets sticking on the wall of reduction pot in magnesium production by Pidgeon process

在线全文

学校读者我要写书评

暂无评论

Journal of Magnesium and Alloys 2024年第6期12卷 2397-2412页

作者： Jilei Xu Jinhui Liu Dong Guo Mao Chen Peixu Yang Rongbin Li Shaojun Zhang School of Materials Science and Engineering Zhengzhou UniversityZhengzhou 450001China Henan Province Industrial Technology research institute of Resources and Materials Zhengzhou UniversityZhengzhou 450001China School of metallurgical and Ecological Engineering University of Science and Technology BeijingBeijing 100083China

In the preparation of magnesium by Pidgeon process,the phenomenon slag pellets sticking on the wall of reduction pot always appear,and the glaze sticking on the inner wall of the reduction pot is difficult to *** mechanism of this phenomenon is studied in this work by X-ray fluorescence spectrometer(XRF)measurement,electron probe microanalyzer scanning(EPMA)analysis,differential scanning calorimetry(DSC)analysis,and thermodynamic *** main components of the glaze are MgO,Ca_(12)Al_(14)F_(2)O_(32),CaF_(2),CaO,and a small amount of Ca_(4)Si_(2)O_(7)F_(2).The solid-liquid transition temperature of Ca_(12)Al_(14)F_(2)O_(32)and CaF_(2)is close to the production temperature of Pidgeon process,which leads to the bonding between the slag pellets and the pot *** loss of CaF_(2)in glaze layer will reduce the total amount of liquid phase and increase the temperature at which Ca_(12)Al_(14)F_(2)O_(32)is completely transformed into liquid phase,which causes glaze layer sticking on the inner wall of the reduction pot.

关键词： Pidgeon process Glaze Ca_(12)Al_(14)F_(2)O_(32) CaF_(2) Solid-liquid transition