检索结果-南通市图书馆

International Journal of Minerals,Metallurgy and Materials 2024年第3期31卷 574-584页

作者： Xiangtao Huo Rongxia Chai Lizheng Gou Mei Zhang Min Guo school of metallurgical and ecological Engineering University of Science and Technology BeijingBeijing 100083China

The coagulation process is a widely applied technology in water and wastewater *** composite polyferric mag-nesium-silicate-sulfate(PFMS)coagulants were synthesized using Na_(2)SiO_(3)·9H_(2)O,Fe_(2)(SO_(4))_(3),and MgSO_(4) as raw materials in this *** effects of aging time,Fe:Si:Mg,and OH:M molar ratios(M represents the metal ions)on the coagulation performance of the as-pre-pared PFMS were systematically investigated to obtain optimum *** results showed that PFMS coagulant exhibited good co-agulation properties in the treatment of simulated humic acid-kaolin surface water and reactive dye *** the molar ratio was controlled at Fe:Si:Mg=2:2:1 and OH:M=0.32,the obtained PFMS presented excellent stability and a high coagulation *** removal efficiency of ultraviolet UV254 was 99.81%,and the residual turbidity of the surface water reached 0.56 NTU at a dosage of 30 mg·L^(-1).After standing the coagulant for 120 d in the laboratory,the removal efficiency of UV254 and residual turbidity of the surface wa-ter were 88.12%and 0.68 NTU,respectively,which accord with the surface water treatment *** addition,the coagulation performance in the treatment of reactive dye wastewater was greatly improved by combining the advantages of magnesium and iron *** with polyferric silicate-sulfate(PFS)and polymagnesium silicate-sulfate(PMS),the PFMS coagulant played a better decolor-ization role within the pH range of 7-13.

关键词： polyferric-magnesium-silicate-sulfate composite coagulants water and wastewater excellent stability high coagulation ef-ficiency decolorization

Reduction behavior of iron ore powder by high-volatile coal in thermogravimetric-gas chromatographic and kinetic analysis

在线全文

学校读者我要写书评

暂无评论

Journal of Iron and Steel Research International 2024年第1期31卷 92-107页

作者： Rui-meng Shi Qi-yuan Mi Bin Li Xiao Shi Chong Zou Jing Guo Han-jie Guo school of metallurgical Engineering Xi’an University of Architecture and TechnologyXi’an710055ShaanxiChina China International Engineering Consulting Corporation Beijing100048China school of metallurgical and ecological Engineering University of Science and Technology BeijingBeijing100083China

The reduction behavior of iron ore powder by high-volatile coal was investigated,and its kinetic mechanism was *** effect of volatiles in coal on the reduction reaction of iron ore was compared by utilizing a Xinjiang lignite with a high volatile content and its pyrolysis carbon produced by high-temperature pyrolysis to remove volatiles,serving as a *** mass loss and gas composition of the samples during the reduction process were detected using thermo-gravimetric analysis and gas chromatography,and the morphological changes of iron ore powder were observed through scanning electron *** kinetic parameters of the iron oxide reduction reaction were calculated by the Flynn-Ozawa-Wall method,and the kinetic mechanism of volatile participation in the iron oxide reduction reaction was determined through the Coats-Redfern *** results indicate that the coupling effect between the high-volatile coal pyrolysis and reduction reactions occurs during the second stage of the entire coupling process,which corresponds to the late stage of coal pyrolysis with a substantial release of H_(2)and *** volatiles in coal actively participated in the reduction reaction,reducing the initiation temperature of the reaction by around 200℃.The reduction of iron oxides by high-volatile coal was jointly promoted by the"hydrogen cycle"and"carbon cycle",resulting in a higher reduction extent and metallization rate at the end of the *** high-volatile coal was used as the reductant,the average activation energy for the entire process was 76.5 kJ/mol,a significant decrease compared to the employment of pyrolysis carbon without volatiles as the reductant(1167 kJ/mol).

关键词： Direct reduction High-volatile coal Volatile Kinetics Reduction mechanism

Water modeling on fluid flow and mixing phenomena in a BOF steelmaking converter

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Journal of Iron and Steel Research International 2024年第3期31卷 595-607页

作者： Xin-yu Cai Hao-jian Duan Ding-han Li Anjun Xu Li-feng Zhang school of metallurgical and ecological Engineering University of Science and Technology Beijing(USTB)Beijing 100083China school of Mechanical and Materials Engineering North China University of TechnologyBeijing 100144China

A 1∶8 physical water model was constructed to investigate the fluid flow and mixing phenomena in the basic oxygen furnace(BOF)*** particle image velocimetry was employed to measure the velocity distribution of the bath and the high-speed camera was applied to capture the cavity shape in the combined blowing BOF *** mixing time for varied operating conditions was measured by the stimulus-response *** cavity depth increased with the decrease in the lance height and the increase in the top gas flow rate while the bottom blowing gas had little influence on the cavity *** minimum cavity depth was obtained under the condition of a 69.8 m^(3)/h top gas flow rate,a 287.5 mm lance height and a 0.93 m^(3)/h bottom blowing gas flow rate,which was 161.2 *** mixing time decreased as the lance height decreased and the top blowing gas flow rate *** mixing time was first decreased and then increased with the increase in the bottom gas flow *** the condition of 69.8 m^(3)/h gas flow rate of top blowing,the 287.5 mm lance height and the 0.93 m^(3)/h gas flow rate of bottom blowing,the mixing time in the converter was 48.65 *** empirical formula between the stirring power and the mixing time in the converter was calculated.

关键词： Water model Fluid flow Particle image velocimetry Mixing time BOF converter

A N-CoSe/CoSe_(2)-C@Cu hierarchical architecture as a current collector-integrated anode for potassium-ion batteries

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Rare Metals 2024年第8期43卷 3702-3712页

作者： Zi-Jie Mu Yan-Jun Gao Wen-Shuai Dong Zong-You Li Qing-Yi Song Han-Jiao Huang Li-Dong Xing Jian-Guo Zhang Wei Wang Qi-Yao Yu State Key Laboratory of Explosion Science and Technology School of Mechatronical EngineeringBeijing Institute of TechnologyBeijing 100081China school of metallurgical and ecological Engineering University of Science and Technology BeijingBeijing 100083China

The highly reversible insertion/extraction of large-radius K^+into electrode materials remains a tough goal,especially for con version-type ***,we design a current collector-integrated electrode(N-CoSe/CoSe_(2)-C@Cu) as an advanced anode for potassium-ion battery(PIBs).The conductive CoSe/CoSe_(2) heterojunction with rich Se vacancy defects,conductive sp^2 N-doped carbon layer,and the elastic copper foil matrix can greatly accelerate the electron transfer and enhance the structural ***,the well-designed N-CoSe/CoSe_(2)-C@Cu current collector-integrated electrode displays enhanced potassium storage performance with regard to a high capacity(325.1 mAh·g^(-1) at 0.1 A·g^(-1) after 200cycles),an exceptional rate capability(223.5 mAh·g^(-1) at2000 mA·g^(-1)),and an extraordinary long-term cycle stability(a capacity fading of only 0.019% per cycle over1200 cycles at 2000 mA·g^(-1)).Impressively,ex situ scanning electron microscopy(SEM) characterizations prove that the elastic structure of copper foil is merged into the cleverly designed N-CoSe/CoSe_(2)-C@Cu heterostructure,which buffers the deformation of structure and volume and greatly promotes the cycle life during the potassium/depotassium process.

关键词： Potassium-ion battery Integrated collector electrode CoSe CoSe_2 Heterojunction Copper foil matrix N-doped carbon

Core-shell mesoporous carbon hollow spheres as Se hosts for advanced Al-Se batteries

在线全文

学校读者我要写书评

暂无评论

International Journal of Minerals,Metallurgy and Materials 2024年第5期31卷 899-906页

作者： Haiping Lei Tianwei Wei Jiguo Tu Shuqiang Jiao State Key Laboratory of Advanced Metallurgy University of Science and Technology BeijingBeijing 100083China school of metallurgical and ecological Engineering University of Science and Technology BeijingBeijing 100083China

Incorporating a selenium(Se)positive electrode into aluminum(Al)-ion batteries is an effective strategy for improving the overall battery ***,the cycling stability of Se positive electrodes has challenges due to the dissolution of intermediate reaction *** this work,we aim to harness the advantages of Se while reducing its limitations by preparing a core-shell mesoporous carbon hollow sphere with a titanium nitride(C@TiN)host to load 63.9wt%Se as the positive electrode material for Al-Se *** the physical and chemical confinement offered by the hollow mesoporous carbon and TiN,the obtained core-shell mesoporous carbon hollow spheres coated with Se(Se@C@TiN)display superior utilization of the active material and remarkable cycling *** a result,Al-Se batteries equipped with the as-prepared Se@C@TiN composite positive electrodes show an initial discharge specific capacity of 377 mAh·g^(-1)at a current density of 1000 mA·g^(-1)while maintaining a discharge specific capacity of 86.0 mAh·g^(-1)over 200 *** improved cycling performance is ascribed to the high electrical conductivity of the core-shell mesoporous carbon hollow spheres and the unique three-dimensional hierarchical architecture of Se@C@TiN.

关键词： aluminum-selenium batteries intermediate products core-shell mesoporous carbon hollow sphere cycling performance

Regulation of Ti(C,N)deposition on hot surface of refractory in blast furnace hearth

在线全文

学校读者我要写书评

暂无评论

Journal of Iron and Steel Research International 2024年第6期31卷 1423-1435页

作者： Jian Cao Cui Wang Jjan-liang Zhang Ke-xin Jiao Guo-hua Zhang State Key Laboratory of Advanced Metallurgy University of Science and Technology BeijingBeijing 100083China school of metallurgical and ecological Engineering University of Science and Technology BeijingBeijing 100083China

Ti(C,N)concentration was found to be lower on the hearth sidewall of a blast furnace and increased gradually toward the bottom of the blast *** Ti(C,N)protective layer in a blast furnace is ***,the formation of a Ti(C,N)protective layer was promoted by studying the heterogeneous nucleation principle of titanium compounds on different substances and regulation measures for the deposition process of titanium compounds on refractories or *** lattice disregistry between the titanium compounds and the main components in the refractory or the main impurities in the protective layer was calculated using a two-dimensional disregistry equation to study the heterogeneous nucleation principle of titanium *** results revealed that in refractory materials,the heterogeneous nucleation of carbonitride is weak when C,SiO_(2),and Al_(2)O_(3) are used as heterogeneous nucleation substrates,and the heterogeneous nucleation of carbonitride is strong when TiO_(2) and SiC are used as heterogeneous nucleation *** nucleation phases,TiC,TiN,Ti(C_(0.3),N_(0.7)),and Ti(C_(0.5),N_(0.5))have similar heterogeneous nucleation ability in single component refractory,and the type of carbonitride has little effect on the lattice *** impurities in the protective layer as the substrate phases are not conducive to the heterogeneous nucleation of *** CaS was used as the substrate phase,the heterogeneous nucleation ability of carbonitride was the *** carbon and alumina were not conducive to the heterogeneous nucleation of carbonitride,but carbon was more unfavourable than alumina.

关键词： Ti(C,N) Lattice disregistry Lattice constant Heterogeneous nucleation Regulation measure

Review on the plastic instability of medium -Mn steels for identifying the formation mechanisms of Lüders and Portevin -Le Chatelier bands

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

International Journal of Minerals,Metallurgy and Materials 2024年第6期31卷 1285-1297页

作者： Bin Hu Han Sui Qinghua Wen Zheng Wang Alexander Gramlich Haiwen Luo school of metallurgical and ecological Engineering University of Science and Technology BeijingBeijing 100083China Steel Institute RWTH Aachen UniversityIntzestraße 152072 AachenGermany

Plastic instability,including both the discontinuous yielding and stress serrations,has been frequently observed during the tensile deformation of medium-Mn steels(MMnS)and has been intensively studied in recent ***,research results are controversial,and no consensus has been achieved regarding the ***,we first summarize all the possible factors that affect the yielding and flow stress serrations in MMnS,including the morphology and stability of austenite,the feature of the phase interface,and the deformation ***,we propose a universal mechanism to explain the conflicting experimental *** conclude that the discontinuous yielding can be attributed to the lack of mobile dislocation before deformation and the rapid dislocation multiplication at the beginning of plastic ***,the results show that the stress serrations are formed due to the pinning and depinning between dislocations and interstitial atoms in ***-induced martensitic transformation,influenced by the mechanical stability of austenite grain and deformation parameters,should not be the intrinsic cause of plastic ***,it can intensify or weaken the discontinuous yielding and the stress serrations by affecting the mobility and density of dislocations,as well as the interaction between the interstitial atoms and dislocations in austenite grains.

关键词： medium manganese steel discontinuous yielding stress serrations retained austenite dislocations

Research progress and future prospects in the service security of key blast furnace equipment

在线全文

学校读者我要写书评

暂无评论

International Journal of Minerals,Metallurgy and Materials 2024年第10期31卷 2121-2135页

作者： Yanxiang Liu Kexin Jiao Jianliang Zhang Cui Wang Lei Zhang Xiaoyue Fan school of metallurgical and ecological Engineering University of Science and Technology BeijingBeijing 100083China Research Institute of Macro-Safety Science University of Science and Technology BeijingBeijing 100083China

The safety and longevity of key blast furnace(BF)equipment determine the stable and low-carbon production of *** pa-per presents an analysis of the heat transfer characteristics of these components and the uneven distribution of cooling water in parallel pipes based on hydrodynamic principles,discusses the feasible methods for the improvement of BF cooling intensity,and reviews the pre-paration process,performance,and damage characteristics of three key equipment pieces:coolers,tuyeres,and hearth ***-thermoere,to attain better control of these critical components under high-temperature working conditions,we propose the application of optimized technologies,such as BF operation and maintenance technology,self-repair technology,and full-lifecycle management ***,we propose further researches on safety assessments and predictions for key BF equipment under new operating conditions.

关键词： blast furnace equipment service security blast furnace campaign self-repair

Migration Behavior of Impurity Iron in Silicon Melt Under Pulsed Electric Current

在线全文

学校读者我要写书评

暂无评论

Acta Metallurgica Sinica(English Letters) 2024年第5期37卷 889-903页

作者： Mengcheng Zhou Yaxiong Dai Changhao Liu Shengli Ding Xinfang Zhang school of metallurgical and ecological Engineering University of Science and Technology BeijingBeijing 100083China Guangdong Zhongnan Iron&Steel Co. Ltd.Guangdong 512123China

The impurity iron in silicon material will seriously affect the photoelectric conversion efficiency of silicon solar ***,the traditional silicon purification method has the disadvantages of long cycle,high energy consumption and serious *** this study,an efficient and green pulsed electric current purification technology is *** electromigration effect of iron elements,the current density gradient driving of iron phase,and the gravity of iron phase all affect the migration behavior of iron phase in silicon melt under pulsed electric *** of the depth of electrode insertion into the silicon melt,the solubility of iron in silicon decreases under the pulsed electric current,which helps to form the iron *** the same time,the iron phase tends to sink toward the bottom under the influence of *** the electrode is shallowly inserted,a non-uniform electric field is formed in the silicon melt,and the iron phase is mainly driven by the current density gradient to accelerate sink toward the *** the electrode is fully inserted,an approximately uniform electric field is formed in the silicon melt,and iron elements are preferentially migrated to the cathode by electromigration,forming iron phase sinking at the *** study of impurity iron migration behavior in silicon melt under pulsed electric current provides a new approach for the purification of polycrystalline silicon.

关键词： metallurgical silicon Pulsed electric current Iron-rich phase Current density gradient Electromigration

Innovations in metallurgical and materials processes:advancing liquid theory and honoring ***-jie Guo's contributions to physical chemistry in metallurgy

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Journal of Iron and Steel Research International 2024年第1期31卷 1-2页

作者： Shuai Liu Jing Guo Han-jie Guo school of Artificial Intelligence Beijing Technology and Business UniversityBeijing100048China school of metallurgical and ecological Engineering University of Science and Technology Beijing(USTB)Beijing100083China

Spanning three decades,***-jie Guo's research group has dedicated itself to exploring the fundamental theories and practical applications of physical chemistry within the realm of *** under the assumption that molecul... 详细信息

关键词： chemistry liquid complexes