检索结果-南通市图书馆

Rare metals 2024年第4期43卷 1786-1792页

作者： Yuan-Feng Xie Xing-Cheng Xie Zhong-Wu Li Rui-Jun Cao Zhong-Kun Lin Qing Li Chen-Guang Lin powder metallurgy and Special Materials Research department General Research Institute for Nonferrous MetalsBeijing100088China

The effects of cryogenic treatment(CT)and tempering-cryogenic treatment(TCT)on the microstructure and properties of coarse-grained WC-10Co cemented carbides with different carbon contents were *** binder phase,WC mean grain sizes,W solubility in the binder,relative magnetic s aturation,densities,hardness,wear resistance and second phase precipitation of cemented carbides with different heat treatments were *** results show that there are significant changes of microstructure and properties in the samples with CT and TCT,especially due to the precipitation of metastable nanoparticles W_(x)Co_(y)C_(z) in the binder during the heat treatments of CT and *** the simultaneous combination of microstructure and nanoparticle-reinforced binder,a dramatically improved combination of hardness and wear resistance of the samples after TCT has been achieved.

关键词： Cryogenic treatment Tempering Coarsegrained cemented carbide Carbon content Nanoparticlereinforced binder

High-temperature elemental segregation induced structure degradation in high-entropy fluorite oxide

在线全文

学校读者我要写书评

暂无评论

Journal of Advanced Ceramics 2024年第3期13卷 310-322页

作者： Yixuan Hu Mariappan Anandkumar Yumeng Zhang Joydip Joardar Atul Suresh Deshpande Xiaodong Wang Kolan Madhav Reddy School of Materials Science and Engineering Shanghai Jiao Tong UniversityShanghai 200240China department of Materials Science and metallurgical Engineering Indian Institute of Technology HyderabadSangareddy 502285India International Advanced Research Centre for powder metallurgy and New Materials(ARCI) Hyderabad 500005India

Fluorite-structured oxides constitute an important category of oxides with a wide range of high-temperature *** the concept of high entropy,high-entropy fluorite oxides(HEFOs)have showcased intriguing high-temperature application ***,unlocking this potential necessitates an assessment of their long-term stability under high-temperature *** this study,we conducted a prolonged heat treatment at 1000℃on typical HEFO,specifically(CeHfZrGdLa)O_(x).After 100 h,high-intensity X-ray diffraction(XRD)revealed a transition from a single-phase fluorite to a multi-phase *** investigation by analytical electron microscoy(AEM)demonstrated that this degradation resulted from facilitated element diffusion and consequent escalating chemical fluctuation at high temperatures,leading to spontaneous segregation and separation of Ce and La elements,forming Ce-rich,La-poor,and La-rich ***,the La-rich phase spontaneously transformed from a fluorite structure(space group Fm3m)to a bixbyite structure(space group Ia3)at elevated temperatures,resulting in the appearance of superstructure reflection in XRD profiles and electron diffraction *** the intricate phase decomposition,the energy band gap showed minimal variation,suggesting potential property stability of(CeHfZrGdLa)O_(x)across a broad range of *** findings offer valuable insights into the future applications of HEFOs.

关键词： phase transition high-temperature stability elemental segregation high-entropy fluorite oxides(HEFOs)

The influence of yttrium and manganese additions on the degradation and biocompatibility of magnesium-zinc-based alloys:In vitro and in vivo studies

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Journal of Magnesium and Alloys 2024年第2期12卷 608-624页

作者： Lei Shi Yang Yan Chun-sheng Shao Kun Yu Bo Zhang Liang-jian Chen Third Xiangya Hospital Central South UniversityChangsha 410013China State Key Laboratory of powder metallurgy Central South UniversityChangsha 410083China School of Materials Science and Engineering Central South UniversityChangsha 410083China department of Mechanical Engineering City University of Hong KongHong KongChina

The repair and regeneration of bone defects are highly challenging orthopedic ***,Mg-based implants have gained popularity due to their unique biodegradation and elastic modulus similar to that of human *** aim of our study is to develop a magnesium alloy with a controllable degradation that can closely match bone tissue to help injuries heal in vivo and avoid cytotoxicity caused by a sudden increase in ion *** this study,we prepared and modified Mg-3Zn,Mg-3Zn-1Y,and Mg-2Zn-1Mn by hot extrusion,and used Mg-2.5Y-2.5Nd was as a *** then investigated the effect of additions of Y and Mn on alloys'*** results show that Mn and Y can improve not only compression strength but also corrosion *** alloy Mg-2Zn-1Mn demonstrated good cytocompatibility in vitro,and for this reason we selected it for implantation in *** degraded Mg-2Zn-1Mn implanted a bone defect area did not cause obvious rejection and inflammatory reaction,and the degradation products left no signs of damage to the heart,liver,kidney,or ***,we find that Mg-2Zn-1Mn can promote an osteoinductive response in vivo and the formation of bone regeneration.

关键词： Magnesium alloy Biodegradation Biocompatibility Bone regeneration Bone defect repair

Wear-resistant Ag-MAX phase 3D interpenetrating-phase composites:Processing,structure,and properties

在线全文

学校读者我要写书评

暂无评论

Nano Research 2024年第2期17卷 806-819页

作者： Yu Guo Xi Xie Zengqian Liu Longchao Zhuo Jian Zhang Shaogang Wang Qiqiang Duan Qing Jia Dake Xu Weihai Xue Deli Duan Filippo Berto Zhefeng Zhang Rui Yang Shi-Changxu Innovation Center for Advanced Materials Institute of Metal ResearchChinese Academy of SciencesShenyang 110016China School of Materials Science and Engineering University of Science and Technology of ChinaHefei 230026China School of Materials Science and Engineering Xi’an University of TechnologyXi’an 710048China Electrobiomaterials Institute Key Laboratory for Anisotropy and Texture of Materials(Ministry of Education)Northeastern UniversityShenyang 110819China Shenyang National Laboratory for Materials Science Institute of Metal ResearchChinese Academy of SciencesShenyang 110016China department of Chemical Engineering Materials and EnvironmentSapienza University of RomeRoma 00185Italy

Electrical contact materials are generally Ag-or Cu-based composites and play a critical role in ensuring the reliability and efficiency of electrical equipments and electronic *** MAX(M is an early transition metal,A is an element from III or IV main groups,and X is carbon or/and nitrogen)phase ceramics display a unique combination of properties and may serve as an ideal reinforcement phase for electrical contact *** biological materials evolved in nature generally exhibit three-dimensional(3D)interpenetrating-phase architectures,which may offer useful inspiration for the architectural design of electrical contact ***,a series of bi-continuous Ag-Ti_(3)SiC_(2) MAX phase composites with high ceramic contents exceeding 50 vol.%and having micron-and ultrafine-scaled 3D interpenetrating-phase architectures,wherein both constituents were continuous and mutually interspersed,were exploited by pressureless infiltration of Ag melt into partially sintered Ti_(3)SiC_(2) *** mechanical and electrical properties as well as the friction and wear performance of the composites were investigated and revealed to be closely dependent on the ceramic contents and characteristic structural *** composites exhibited a good combination of properties with high hardness over 2.3 GPa,high flexural strength exceeding 530 MPa,decent fracture toughness over 10 MPa·m^(1/2),and good wear resistance with low wear rate at an order of 10^(-5)mm^(3)/(N·m),which were much superior compared to the counterparts made by powder metallurgy *** particular,the hardness,electrical conductivity,strength,and fracture toughness of the composites demonstrated a simultaneous improvement as the structure was refined from micron-to ultrafine-scales at equivalent ceramic *** good combination of properties along with the facile processing route makes the Ag-Ti_(3)SiC_(2)3D interpenetrating-phase composites appealing for electrical contact applicatio

关键词： three-dimensional(3D)interpenetrating-phase architecture Ag-MAX(M=early transition metal A=element from III or IV main groups and X=carbon or/and nitrogen)phase composites melt infiltration electrical contact materials mechanical

Stable alkali halide vapor assisted chemical vapor deposition of 2D HfSe2 templates and controllable oxidation of its heterostructures

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Frontiers of physics 2024年第3期19卷 29-38页

作者： Wenlong Chu Xilong Zhou Ze Wang Xiulian Fan Xuehao Guo Cheng Li Jianling Yue Fangping Ouyang Jiong Zhao Yu Zhou School of Physics Hunan Key Laboratory of Nanophotonics and DevicesCentral South UniversityChangsha 410083 China 2.State Key Laboratory of powder metallurgy Central South UniversityChangsha 410083 China 3.School of Physical Science and Technology Xinjiang UniversityUrumqi 830046 China 4.department of Applied Physics The Hong Kong Polytechnic UniversityKowloonHong KongChina

Two-dimensional hafnium-based semiconductors and their heterostructures with native oxides have been shown unique physical properties and potential electronic and optoelectronic ***,the scalable synthesis methods for ultrathin layered hafnium-based semiconductor laterally epitaxy growth and its heterostructure are still restricted,also for the understanding of its formation ***,we report the stable sublimation of alkali halide vapor assisted synthesis strategy for high-quality 2D HfSe_(2) nanosheets via chemical vapor ***-crystalline ultrathin 2D HfSe_(2) nanosheets were systematically grown by tuning the growth parameters,reaching the lateral size of 6‒40μm and the thickness down to 4.5 *** scalable amorphous HfO_(2)and HfSe_(2)heterostructures were achieved by the controllable oxidation,which benefited from the approximate zero Gibbs free energy of unstable 2D HfSe_(2) *** crystal structure,elemental,and time dependent Raman characterization were carried out to understand surface precipitated Se atoms and the formation of amorphous Hf−O bonds,confirming the slow surface oxidation and lattice incorporation of oxygen *** relatively smooth surface roughness and electrical potential change of HfO_(2)−HfSe_(2) heterostructures indicate the excellent interface quality,which helps obtain the high performance memristor with high on/off ratio of 105 and long retention period over 9000 *** work introduces a new vapor catalysts strategy for the synthesis of lateral 2D HfSe_(2) nanosheets,also providing the scalable oxidation of the Hf-based heterostructures for 2D electronic devices.

关键词： chemical vapor deposition HfSe_(2)−HfO_(2) nanoelectronics

Influence of sintering time on microstructure and properties of hot oscillatory pressing sintered W–Cu refractory alloys

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Tungsten 2024年第2期6卷 323-332页

作者： Zi-Qian Wu Wei Zhao Ka Gao Shi-Hao Du Qing-Quan Kong De-Jian Sun Yang Gao School of Materials Science and Engineering Zhengzhou University of AeronauticsZhengzhou 450015China School of Mechanical Engineering University of Shanghai for Science and TechnologyShanghai 200093China department of General Medicine Changhai HospitalShanghai 200000China Hubei Key Laboratory of Mechanical Transmission and Manufacturing Engineering Wuhan University of Science and TechnologyWuhan 430081China Sichuan Province Engineering Technology Research Center of powder metallurgy Chengdu UniversityChengdu 610106China

W–Cu refractory alloys are widely used in aerospace,aviation,electronics,power,and other fi ***,because of its large melting point diff erence between alloy elements,the conventional powder metallurgy method required a long time of high temperature sintering is very likely to cause low density and abnormal grain size ***,90W-10Cu refractory alloys were successfully prepared by hot oscillatory pressing(HOP)under diff erent sintering time in this *** the infl uence of sintering time on the microstructure,grain size,density,Vickers hardness,room-tensile property,and electrical conductivity of the W–Cu refractory alloy was systematically *** results showed that during the short sintering time(30–90 min),the density,Vickers hardness,tensile strength,and electrical conductivity of the W–Cu refractory alloy increased signifi cantly to 98.7%,163.29 HV 30,507.3 MPa,and 14.2%International Annealed Copper Standard with the sintering time increasing,respectively,while its grain size showed no obvious *** the sintering time further increased to 120 min,the density was basically consistent with the sintering time of 90 ***,the prolonged high temperature sintering resulted in the grain growth of the samples,which caused the deterioration of the Vickers hardness,room-tensile strength,and conductivity properties of the W–Cu refractory *** the same sintering time,the density,Vickers hardness,and electrical conductivity of the HOP sintered W–Cu refractory alloy were signifi cantly higher than those of the HP sintered *** was indicated that high density,fi ne-grain,and excellent properties W–Cu refractory alloys could be prepared by hot oscillatory pressing under appropriate sintering time.

关键词： W–Cu refractory alloy Hot oscillatory pressing Sintering time Microstructure Property

Hot Deformation Behavior and Microstructures Evolution of GNP-Reinforced Fine-Grained Mg Composites

在线全文

学校读者我要写书评

暂无评论

Acta metallurgica Sinica(English Letters) 2024年第3期37卷 407-424页

作者： Hengrui Hu Jiayu Qin Yunpeng Zhu Jinhui Wang Xiaoqiang Li Peipeng Jin Qinghai Provincial Key Laboratory of New Light Alloys Qinghai UniversityXining 810016China Qinghai Provincial Engineering Research Center of High Performance Light metal Alloys and Forming Qinghai UniversityXining 810016China department of Mechanical Engineering Tsinghua UniversityBeijing 100084China School of Material Science and Engineering Lanzhou University of TechnologyLanzhou 730050China

Graphene nanoplates(GNPs)-reinforced magnesium matrix composites have been attracted great ***,knowledge is lack for the hot deformation behavior of GNP-reinforced magnesium(GNPs/Mg)*** this study,the fine-grained GNPs/Mg composite was fabricated by powder metallurgy process followed by *** hot deformation behavior,microstructure evolution and dynamic recrystallization(DRX)mechanism of fine-grained GNPs/Mg composite were investigated by hot compression test and electron back-scatter diffraction(EBSD).The hot compression tests of the composite were conducted at temperatures between 423 and 573 K with the strain rates from 0.001 to 1 s^(-1).The strain compensated power law equation was established to describe the hot deformation behavior of the *** stress exponent and activation energy of the composite are 7.76 and 83.23 kJ/mol,respectively,suggesting that the deformation mechanism is grain boundary slip controlled dislocation climb *** abnormally high stress exponent and activation energy are unattainable in the composite due to the fine grain size of the composites and the absence of Zener pinning and Orowan effects of GNPs *** grain size increases with the decrease in Zener-Hollomn(Z)parameter,which can be well fitted by power-law *** the increase in grain size and decrease in Z parameter,the geometrically necessary dislocation density decreases,which shows the approximately power-law relationship.A random and weak texture was formed after hot *** discontinuous dynamic recrystallization and continuous dynamic recrystallization mechanism dominated the DRX behavior at 473 K/0.001 s^(-1) and 573 K/0.001 s^(-1),respectively.

关键词： GNPs Mg composite Hot deformation behavior Constitutive equations Microstructure evolution Dynamic recrystallization

Influence of Component Size on the Corrosion Behavior of Ti6Al4V Alloy Fabricated by Electron Beam powder Bed Fusion

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Acta metallurgica Sinica(English Letters) 2024年第1期37卷 159-168页

作者： Hongyu Zheng Xin Gai Yun Bai Wentao Hou Shujun Li Yulin Hao R.D.K.Misra Rui Yang Institute of metal Research Chinese Academy of SciencesShenyang110016China School of Materials Science and Engineering University of Science and Technology of ChinaShenyang110016China Nuclear Power Institute of China Chengdu610213China department of metallurgical Materialsand Biomedical EngineeringThe University of Texas at El Paso500WUniversity AvenueEl PasoTX79968USA

The electrochemical behavior of Ti-6Al-4V with 1 mm and 16 mm thickness prepared by electron beam powder bed fusion(EB-PBF)was investigated in phosphate buffered *** results showed that EB-PBF Ti-6Al-4V with a larger component size was more resistant to corrosion compared to the smaller component,because of less acicularαʹphase content and moreβphase *** a non-equilibrium phase in the“high-energy state”,αʹphase has a greater susceptibility to corrode and reduces the corrosion resistance of the material,whileβphase improves corrosion resistance of titanium *** results show that the phase composition has a more significant effect on the corrosion performance than the grain size.

关键词： Electron beam powder bed fusion Ti6Al4V alloy Corrosion resistance Component size Polarisation

Spark Plasma Sintering of Boron Carbide Using Ti_(3)SiC_(2) as a Sintering Additive

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Journal of Wuhan University of Technology(Materials Science) 2024年第3期39卷 645-650页

作者： Hülya Biçer Mustafa Tuncer Hasan Göçmez Iurii Bogomol Valerii Kolesnichenko Andrey Ragulya Kutahya Dumlupinar University School of EngineeringDepartment of Metallurgical and Materials EngineeringKütahya 43100Tur-key Boron Based Advanced Ceramics Application and Research Center Kütahya Dumlupınar UniversityKütahya 43100Turkey Advanced Technologies Center(İLTEM) Kütahya Dumlupınar UniversityKütahya 43000Turkey department of High-Temperature Ma-terials and powder metallurgy National Technical University of Ukraine“Igor Sikorsky Kyiv Polytechnic Institute”Kyiv 03056Ukraine Frantsevich Institute for Problems of Materials Science National Academy of Sciences of UkraineKyiv 03056Ukraine

Boron carbide has unique properties for wide application possibilities;however,poor sinterability limits its *** approach to overcome this limitation is the addition of secondary phases into boron *** carbide based composite ceramics are produced by the direct addition of secondary phases into the structure or via reactive sintering using a sintering *** present study investigated the effect of Ti_(3)SiC_(2) addition to boron carbide by reactive spark plasma sintering in the range of 1700-1900℃.Ti_(3)SiC_(2) phase decomposed at high temperatures and reacted with B4C to form secondary phases of TiB2 and *** results demonstrated that the increase of Ti_(3)SiC_(2) addition(up to 15 vol%)effectively promoted the densification of B4C and yielded higher ***,as the amount of Ti_(3)SiC_(2) increased further,the formation of microstructural inhomogeneity and agglomeration of secondary phases caused a decrease in hardness.

关键词： reactive sintering SPS boron carbide MAX phase

Constructing highly safe and long-life calcium ion batteries based on hydratedvanadium oxide cathodes featuring a pillar structure

在线全文

学校读者我要写书评

暂无评论

Rare metals 2024年第6期43卷 2597-2612页

作者： Chun-Fang Wang Shi-Wei Zhang Lan Huang Yuan-Min Zhu Feng Liu Jian-Chuan Wang Li-Ming Tan Chun-Yi Zhi Cui-Ping Han powder metallurgy Research Institute Central South UniversityChangsha410083China Songshan Lake Materials Laboratory Dongguan 523808China Research Institute of Interdisciplinary Science and School of Materials Science and Engineering Dongguan University of TechnologyDongguan 523808China department of Materials Science and Engineering City University of Hong KongHong Kong 999077China Faculty of Materials Science and Energy Engineering/Institute of Technology for Carbon Neutrality Shenzhen Institute of Advanced TechnologyChinese Academy of SciencesShenzhen 518055China

Calcium-ion batteries(CIBs)have generated intense interest due to the growing demand for safer,cheaper,and large-scale energy storage ***,their development is still in its infancy,owing to the lack of suitable cathodes for sustaining reversiblc Ca^(2+)intercalation/***,layered H_(2)V_(3)O_(8)(HVO)with Zn^(2+)pre-insertion(ZHVO)is reported as a high-rate and highly durable cathode material for *** existence of Zn^(2+)and H_(2)O pillars could expand the interlayer spacing up to 1.8 nm,which is favorable for the diffusion of bulky Ca^(2+).The formation of Zn-O bonds facilitates electron transfer and enhances electrical ***,the ZHVO cathode achieves superior capacity performance(213.9 mAh·g^(-1)at 0.2 A·g^(-1))and long lifespan(78.3%for 1,000 cycles at 5 A·g^(-1))compared to pristine *** functional theory(DFT)calculations revealed that Zn^(2+)moved during Ca^(2+)intercalation,thereby reducing the diffusion energy barrier and facilitating Ca^(2+)***,a safe aqueous calcium ion cell was successfully assembled.

关键词： Multivalent batteries Calcium-ion batteries Layered structure Vanadium oxide Cathode materials