检索结果-南通市图书馆

Effect of ceramic work rolls on surface roughness of rolled SUS304 ultra-thin strips

Journal of Iron and Steel Research International 2024年第7期31卷 1704-1718页

作者： Peng-cheng Li Tao Wang Chen-chen Zhao Qi Liu Qing-xue Huang College of Mechanical and Vehicle Engineering Taiyuan University of TechnologyTaiyuan 030024ShanxiChina Engineering Research Center of Advanced metal Composites forming Technology and Equipment of Ministry of Education Taiyuan University of TechnologyTaiyuan 030024ShanxiChina National Key Laboratory of metal forming Technology and Heavy Equipment Taiyuan University of TechnologyTaiyuan 030024ShanxiChina

Surface morphology and roughness are important parameters of surface quality of cold-rolled ultra-thin strip *** order to study the effect of Si_(3)N_(4) ceramic work rolls on the surface roughness of SUS304 ultra-thin strip,ABAQUS finite element model calculation,3D laser profilometry,and other methods were adopted based on the physical characteristics of Si_(3)N_(4) ceramic roll and 9Cr2MoV steel roll,like anti-flattening performance and oil *** surface morphology and roughness of SUS304 ultra-thin strip rolled by different material work rolls under oil lubrication conditions were *** results showed that under the rolling force of 10 kN,the maximum flattening amount of Si_(3)N_(4) ceramic roll was reduced by 35.14%compared to that of 9Cr2MoV steel *** reduction rate of SUS304 ultra-thin strip rolled by ceramic roll was 34.19%,while that rolled by steel roll was only 22%;Si_(3)N_(4) ceramic roll can further increase the number of alternating convex peaks and concave valleys in the rolled thin strip,reduce the profile steepness,reduce surface roughness,and enhance the planarization effect of surface micro-convex bodies,with improving surface quality and surface ***,the mechanism of Si_(3)N_(4) ceramic roll significantly improving the surface roughness of rolled SUS304 ultra-thin strip was proposed.

关键词： Ceramic work roll-Steel roll SUS304 ultra-thin strip Reduction Surface roughness

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

A Review of Magnesium Alloys as Structure–Function Integrated Materials

引用

Acta metallurgica Sinica(English Letters) 2024年第8期37卷 1301-1338页

作者： Zhenfei Jiang Bo Hu Zixin Li Fanjin Yao Jiaxuan Han Dejiang Li Xiaoqin Zeng Wenjiang Ding National Engineering Research Center of Light Alloy Net forming and State Key Laboratory of metal Matrix Composites Shanghai Jiao Tong UniversityShanghai 200240China

Magnesium alloys have a significant advantage,lower density over the other structure materials;hence,they have been widely used in various fields such as transportation and *** the development of research and the enlargement of the research scope,more advantages have been revealed:excellent shielding efficiency,extraordinarily high damping capacity,as well as impressive thermal ***,Mg alloys have the potential to be various functional materials,such as electromagnetic shielding material,damping material,and thermal conductive *** review comprehensively summarizes the research progress and the up-to-date summary of Mg alloys as structure–function integrated materials in recent *** atoms,heat treatment,deformation,secondary phase,and temperature,which have a significant influence on the properties of magnesium alloys,are *** expect this review to be helpful for those who are working on developing structure–function integrated materials with superior comprehensive performance.

关键词： Magnesium alloys Structure-function integrated Electromagnetic shielding Damping capacity Thermal conductivity

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Mechanism of high-energy pulsed current-assisted rolling of 08AL carbon steel ultra-thin strip

引用

Journal of Iron and Steel Research International 2024年第2期31卷 416-427页

作者： Zhong-kai Ren Ya-nan Xu Jia-zhao Chen He Li Rui-lin Yuan Zhen-hua Wang Tao Wang Xiao Liu College of Mechanical and Vehicle Engineering Taiyuan University of TechnologyTaiyuan030024ShanxiChina Engineering Research Center of Advanced metal Composites forming Technology and Equipment(Ministry of Education) Taiyuan University of TechnologyTaiyuan030024ShanxiChina National Key Laboratory of metal forming Technology and Heavy Equipment China National Heavy Machinery Research Institute Co.Ltd.Xi’an710016ShaanxiChina

To improve the plastic deformation performance of a 08AL carbon steel ultra-thin strip,a pulsed electric field was integrated into the plastic processing of the ultra-thin strip,and the effects of high-energy current on its deformation ability were ***-assisted tensile tests were employed,and the results clarified that the pulsed current could reduce the activation energy of faults and promoted dislocation slip within grains and at grain boundaries,leading to a decrease in the deformation resistance of the metal and an increase in its plastic *** the current density of 2.0 A/mm2,the yield strength,tensile strength,and elongation of the rolled sample reached 425 MPa,467 MPa,and 12.5%,*** the rolling process,it was found that the pulsed current promoted the dynamic recrystallization of the ultra-thin strip,reduced its dislocation density and deformation resistance,and promoted the coordinated deformation of the metal.

关键词： 08AL ultra-thin strip High-energy pulsed current Mechanical property Dislocation density Dynamic recrystallization

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

A Review on Particle Reinforced Mg Matrix Composites Fabricated by Powder metallurgy

引用

Acta metallurgica Sinica(English Letters) 2024年第3期37卷 391-400页

作者： Zhiyuan Liu Li Jin Jian Zeng Fulin Wang Fenghua Wang Shuai Dong Jie Dong National Engineering Research Center of Light Alloy Net forming and State Key Laboratory of metal Matrix Composite School of Materials Science and EngineeringShanghai Jiao Tong UniversityShanghai 200240China

This paper provides a comprehensive review of research progress in particle-reinforced Mg matrix composites prepared via powder *** article discusses different strategies,such as micro-sized,nano-sized particles,and multi-particle hybridization,which has been employed to enhance the performance of the *** addition,a range of preparation techniques that optimize the dispersion of the reinforcing particles are *** paper also highlights how the different configurations between the reinforcements and matrix alloy impact the composites’***,the article outlines the prospects of particles reinforced Mg matrix composites fabricated via powder metallurgy and recommends modification methods that could be explored to further develop these materials for various applications.

关键词： Magnesium matrix composites Reinforcing particle Powder metallurgy Mechanical properties Configuration

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Microstructure and impact behavior of Mg-4Al-5RE-xGd cast magnesium alloys

引用

Journal of Magnesium and Alloys 2024年第5期12卷 1799-1814页

作者： Jie Wei Qudong Wang Huisheng Cai Mahmoud Ebrahimi Chuan Lei National Engineering Research Center of Light Alloy Net forming and Key State Laboratory of metal Matrix Composites School of Materials Science and EngineeringShanghai Jiao Tong UniversityShanghai 200240China

This work investigated the microstructure and impact behavior of Mg-4Al-5RE-xGd(RE represents La-Ce mischmetal;x=0,0.2,0.7 wt.%)alloys cast by high-pressure die casting(HPDC),permanent mold casting(PMC),and sand casting(SC)*** results indicated that with increasing Gd content,the grain sizes of the HPDC alloy had a slight change,but the grains of the PMC and SC alloys were significantly ***,the acicular Al_(11)RE_(3)phase was modified into the short-rod shape under the three casting *** impact toughness of the studied alloy was mainly dominated by the absorbed energy during the crack *** increasing Gd content,the impact toughness of the studied alloy monotonically increased due to the lower tendency of the modified second phase toward crack *** impact stress was higher than the tensile stress,exhibiting a strain rate sensitivity for the mechanical response;however,the HPDC alloy had an inconsistent strain rate sensitivity during the impact event due to the transformation of the deformation mechanism from twinning to slip with increasing *** dimples covered the fracture surface of the fine-grained HPDC alloys,indicating a typical ductile ***,due to the deficient{1012}twinning activity and the suppressed grain boundary sliding during the impact event,the HPDC alloys showed insufficient plastic deformation capacity.

关键词： Mg-Al-RE alloy Gadolinium Microstructure Impact behavior

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Effects of processing parameters on fabrication defects,microstructure and mechanical properties of additive manufactured Mg–Nd–Zn–Zr alloy by selective laser melting process

引用

Journal of Magnesium and Alloys 2024年第6期12卷 2249-2266页

作者： Wenyu Xu Penghuai Fu Nanqing Wang Lei Yang Liming Peng Juan Chen Wenjiang Ding National Engineering Research Center of Light Alloy Net forming and State Key Laboratory of metal Matrix Composite School of Materials Science and EngineeringShanghai Jiao Tong University800 Dongchuan RoadShanghai 200240China Shanghai Light Alloy Net forming National Engineering Research Center Co. LtdShanghai 201615China

Mg–3Nd–0.2Zn–0.4Zr(NZ30K,wt.%)alloy is a new kind of high-performance metallic *** combination of the NZ30K Magnesium(Mg)alloy and selective laser melting(SLM)process seems to be an ideal solution to produce porous Mg degradable ***,the microstructure evolution and mechanical properties of the SLMed NZ30K Mg alloy were not yet studied ***,the fabrication defects,microstructure,and mechanical properties of the SLMed NZ30K alloy under different processing parameters were *** results show that there are two types of fabrication defects in the SLMed NZ30K alloy,gas pores and unfused *** the increase of the laser energy density,the porosity sharply decreases to the minimum first and then slightly *** minimum porosity is 0.49±0.18%.While the microstructure varies from the large grains with lamellar structure inside under low laser energy density,to the large grains with lamellar structure inside&the equiaxed grains&the columnar grains under middle laser energy density,and further to the fine equiaxed grains&the columnar grains under high laser energy *** lamellar structure in the large grain is a newly observed microstructure for the NZ30K Mg *** laser energy density leads to finer grains,which enhance all the yield strength(YS),ultimate tensile strength(UTS)and elongation,and the best comprehensive mechanical properties obtained are YS of 266±2.1 MPa,UTS of 296±5.2 MPa,with an elongation of 4.9±0.68%.The SLMed NZ30K Mg alloy with a bimodal-grained structure consisting of fine equiaxed grains and coarser columnar grains has better elongation and a yield drop phenomenon.

关键词： Selective laser melting Mg alloy Processing parameter Lamellar structure Bimodal-grained structure

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

A Physical Core-Loss Model for Laminated Magnetic Sheet Steels

引用

Journal of Power and Energy Engineering 2024年第3期12卷 115-123页

作者： Kuofeng Chen metal forming Technology Section Metal Industries Research & Development Centre Kaohsiung

A full-frequency instant core-loss equation built from the induction physical model of magnetic materials, where the iron loss, eddy loss, and hysteresis loss no longer have an integral term, and this new equation provides high simulation accuracy and performs dynamic core loss analysis on non-sinusoidal or pulse magnetic fields. The simulation examples use a high-grade electrical steel sheet 65CS400 by Epstein experimental data covering magnetic field 0.1 - 1.8 T and frequency 50 - 5000 Hz, and the average error of the simulated core loss is less than 4%. Since the simulation is converged by magnetic physical parameters, so the physical relevance of the similar laminated materials can be compared with the coefficient results. .

关键词： Core Loss Hysteresis Loss Electrical Steel Sheet

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

A new method for evaluating wedges of steel plates and strips

引用

Journal of Iron and Steel Research International 2024年第7期31卷 1719-1735页

作者： Xiao-bao Ma Xiao-xin Ma Tao Wang Zhong-kai Ren Yu-cheng Ren College of Mechanical and Vehicle Engineering Taiyuan University of TechnologyTaiyuan 030024ShanxiChina Ministry of Education Engineering Research Center of Advanced metal Composite forming Technology and Equipment Taiyuan University of TechnologyTaiyuan 030024ShanxiChina National Key Laboratory of metal forming Technology and Heavy Equipment Taiyuan University of TechnologyTaiyuan 030024ShanxiChina China National Heavy Machinery Research Institute Co. Ltd.Xi'an 710018ShaanxiChina Faculty of Mechanical Engineering Hebei University of ArchitectureZhangjiakou 075000HebeiChina

To overcome the inaccuracy problem of the traditional wedge evaluation of steel plates and strips caused by the ran-domness of the thicknesses of two local points and improve the reliability of the wedge index,the double-centroid method for the wedge evaluation was proposed,and a model based on the centroid theory was ***,an integral model for the discrete thickness values of the cross-section profiles was *** discussion focused on the distinct characteristics of the two-point method,asymmetric method,and double-centroid method in evaluating the asymmetric distribution of *** three methods were employed to evaluate the wedge values of both the theoretical and measured cross-sections of steel plates and strips,and the accuracies of three wedge evaluation models were analyzed and *** results showed that the double-centroid method objectively reflects the degree and variation characteristics of the wedge values of the cross-sections of steel plates and strips,and this method is feasible,reliable,and outstanding.

关键词： Steel plate and strip Wedge Two-point method Double-centroid method Reliability

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Closure Effect of Ⅰ+Ⅱ Mixed-mode Crack for EA4T Axle Steel

引用

Chinese Journal of Mechanical Engineering 2024年第4期 340-354页

作者： Shuancheng Wang Bing Yang Shuwei Zhou Jian Li Shoune Xiao State Key Laboratory of Rail Transit Vehicle System Southwest Jiaotong University Institute of metal forming RWTH Aachen University

The crack-closure effect is a crucial factor that affects the crack growth rate and should be considered in simulation analysis and testing. A mixed-mode I + II loading fatigue crack growth test was performed using EA4T axle steel specimens. The variation of the plastic-induced crack closure(PICC) effect and the roughness-induced crack closure(RICC) effect during crack deflection in the mixed-mode is examined in this study. The results show that the load perpendicular to the crack propagation direction hinders the slip effect caused by the load parallel to the crack propagation direction under mixed-mode loading, and the crack deflection is an intuitive manifestation of the interaction between the PICC and RICC. The proportion of the RA value change on the crack side caused by contact friction was reduced by the interaction between PICC and RICC. The roughness of the crack surface before and after the crack deflection is different, and the spatial torsion crack surface is formed during the crack propagation process. With the increase of the crack length, the roughness of the fracture surface increases. During the crack deflection process,the PICC value fluctuates around 0.2, and the RICC value is increased to 0.15.

关键词：

来源：

同方期刊数据库评论

在线全文

同方期刊数据库

学校读者我要写书评

暂无评论

High-Temperature Stability of Mg-1Al-12Y Alloy Containing LPSO Phase and Mechanism of Its Portevin-Le Chatelier(PLC)Effect

引用

Acta metallurgica Sinica(English Letters) 2024年第6期37卷 982-998页

作者： Qian-Long Ren Shuai Yuan Shi-Yu Luan Jin-Hui Wang Xiao-Wei Li Xiao-Yu Liu Qinghai Provincial Key Laboratory of New Light Alloys Qinghai Provincial Engineering Research Center of High Performance Light Metal Alloys and FormingQinghai UniversityXining810016China School of Materials Science and Engineering Shenyang University of TechnologyShenyang110870China

In this study,the high-temperature stability and the generation mechanism of the Portevin-Le Chatelier(PLC)effect in solid-solution Mg-1Al-12Y alloy with different heat treatment processes were investigated by adjusting the content of long-period stacking ordered(LPSO)*** was found that the content of LPSO phases in the alloys differed the most after heat treatment at 530℃for 16 h and 24 h,with values of 13.56%and 3.93%***,high-temperature tensile experiments were conducted on these two alloys at temperatures of 150℃,200℃,250℃,and 300℃.The results showed that both alloys exhibited the PLC effect at temperatures ranging from 150 to 250℃.However,at a temperature 300℃,only the alloy with a greater concentration of LPSO phases exhibited the PLC effect,whereas the alloy with a lower proportion of LPSO phases did not exhibit this ***,both alloys exhibited remarkable high-temperature stability,with the alloy containing a greater percentage of LPSO phases also demonstrating superior *** underlying mechanism for this phenomenon lies in the exceptional high-temperature stability exhibited by the second phase within the ***,the LPSO phase effectively obstructs the movement of dislocations,and it also undergoing kinking to facilitate plastic deformation of the *** results indicate that the PLC effect can be suppressed by reducing dislocation pile-up at grain boundaries,which leads to a decrease in alloy plasticity but an increase in *** presence of the PLC effect in the WA121 alloy is attributed to the abundant dispersed second phase within the alloy,which initially hinders the movement of dislocations,leading to an increase in stress,and subsequently releases the dislocations,allowing them to continue their movement and thereby reducing in stress.

关键词： Magnesium alloy Long-period stacking ordered(LPSO)phase Portevin-Le Chatelier effect High temperature

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

欢迎您,

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

请选择保存的检索档案：

请选择收藏分类：

通借通还

欢迎您,

建议与咨询 留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

请选择保存的检索档案： 新增检索档案 确定 取消

请选择收藏分类： 新增自定义分类 确定 取消

通借通还

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

请选择保存的检索档案：

请选择收藏分类：