检索结果-南通市图书馆

Chinese Journal of Electronics 2024年第2期33卷 504-515页

作者： Wei-Chiang WU college of mechanical and electrical engineering Sanming University

This paper considers downlink multiuser multiple-input-multiple-output system with parallel spatial modulation scheme, in which base station transmitter antennas are separated into K groups corresponding to K user terminals. Generalized spatial modulation is employed, in which a subset(more than single antenna) of transmit antenna array are activated and the activating pattern corresponds to specific spatial symbol. Different from existing precoding-based algorithms, we develop a two-stage detection scheme at each user terminal: In the pre-processing stage, a minimax algorithm is proposed to identify the indices of active antennas, where the key idea is that the minimum output energy of the detector is maximized; A constrained minimum output energy algorithm is proposed in the post-processing stage to mitigate multiuser interference and extract temporal symbols. Compared with existing precoding-based algorithms, the complexity is significantly reduced. Moreover, the proposed algorithm is semi-blind,in which only a small subset of channel state information is required to identify active antennas as well as eliminate multiuser interference. Simulation results demonstrate that the proposed algorithm is near-far resistant and the spectral efficiency is extensively increased compared to the conventional spatial modulation scheme.

关键词： GSM Spectral efficiency Computer network reliability Transmitting antennas Modulation Symbols Downlink

Calculation and Analysis of TVMS Considering Profile Shifts and Surface Wear Evolution Process of Spur Gear

在线全文

同方期刊数据库

学校读者我要写书评

暂无评论

Chinese Journal of mechanical engineering 2024年第3期37卷 136-150页

作者： Wenzheng Liu Rupeng Zhu Wenguang Zhou Jingjing Wang college of mechanical and electrical engineering Nanjing University of Aeronautics and AstronauticsNanjingChina

Profile shift is a highly effective technique for optimizing the performance of spur gear transmission ***,tooth surface wear is inevitable during gear meshing due to inadequate lubrication and long-term *** profile shift and tooth surface wear(TSW)can impact the meshing characteristics by altering the involute tooth *** this study,a tooth stiffness model of spur gears that incorporates profile shift,TSW,tooth deformation,tooth contact deformation,fillet-foundation deformation,and gear body structure coupling is *** model efficiently and accurately determines the time-varying mesh stiffness(TVMS).Additionally,an improved wear depth prediction method for spur gears is developed,which takes into consideration the mutually prime teeth numbers and more accurately reflects actual gear meshing *** show that consideration of the mutual prime of teeth numbers will have a certain impact on the TSW ***,the finite element method(FEM)is employed to accurately verify the values of TVMS and load sharing ratio(LSR)of profile-shifted gears and worn *** study quantitatively analyzes the effect of profile shift on the surface wear process,which suggests that gear profile shift can partially alleviate the negative effects of *** contribution of this study provides valuable insights into the design and maintenance of spur gear systems.

关键词： Profile shift Tooth surface wear Structure coupling effect Improved wear depth prediction method TVMS

Research on Flexible Job Shop Scheduling Based on Improved Two-Layer Optimization Algorithm

在线全文

学校读者我要写书评

暂无评论

Computers, Materials & Continua 2024年第1期78卷 811-843页

作者： Qinhui Liu Laizheng Zhu Zhijie Gao Jilong Wang Jiang Li college of mechanical and electrical engineering Harbin Engineering UniversityHarbin150001China

To improve the productivity,the resource utilization and reduce the production cost of flexible job shops,this paper designs an improved two-layer optimization algorithm for the dual-resource scheduling optimization problem of flexible job shop considering workpiece ***,a mathematical model is established to minimize the maximum completion ***,an improved two-layer optimization algorithm is designed:the outer layer algorithm uses an improved PSO(Particle Swarm Optimization)to solve the workpiece batching problem,and the inner layer algorithm uses an improved GA(Genetic Algorithm)to solve the dual-resource scheduling ***,a rescheduling method is designed to solve the task disturbance problem,represented by machine failures,occurring in the workshop production ***,the superiority and effectiveness of the improved two-layer optimization algorithm are verified by two typical *** case results show that the improved two-layer optimization algorithm increases the average productivity by 7.44% compared to the ordinary two-layer optimization *** setting the different numbers of AGVs(Automated Guided Vehicles)and analyzing the impact on the production cycle of the whole order,this paper uses two indicators,the maximum completion time decreasing rate and the average AGV load time,to obtain the optimal number of AGVs,which saves the cost of production while ensuring the production *** research combines the solved problem with the real production process,which improves the productivity and reduces the production cost of the flexible job shop,and provides new ideas for the subsequent research.

关键词： Dual resource scheduling workpiece batching rescheduling particle swarm optimization genetic algorithm

Flat jet electrochemical milling of TC4 alloy with tailoring backward parallel flow

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Chinese Journal of Aeronautics 2024年第4期37卷 574-592页

作者： Huanghai KONG Ningsong QU college of mechanical and electrical engineering Nanjing University of Aeronautics and AstronauticsNanjing 210016China

In flat jet electrochemical milling, the electrolyte forms a backward parallel flow after impacting the workpiece, resulting in a weak current density distribution on the workpiece. Poor surface quality usually occurs on the machined titanium alloy surface because it inevitably suffers from the weak current density. In this study, a method of flat jet electrochemical milling with tailoring the backward parallel flow was proposed to eliminate the negative effects caused by the weak current density. Multiphysics simulations are carried out to comprehend the mechanism of flat jetEC milling with tailoring backward parallel flow and better construct the novel tool *** on flat jet electrochemical milling of TC4 alloy with and without tailoring backward parallel flow are conducted. The results reveal that, compared with flat jet electrochemical milling without tailoring backward parallel flow, the recommended tool reduces the surface roughness by86% to 93%, and improves the material removal rate by 93% to 163% with different feed ***, the recommended tool is more conducive to maintaining the inherent hardness of the material. Finally, a surface with low Sa of 0.37 μm is obtained.

关键词： Flat jet electrochemical milling TC4 alloy Surface roughness Micro-hardness Material removal rate

Design method and experimental study of a cathode tool with an extremely high leveling ratio for electrochemical machining of blisk

在线全文

学校读者我要写书评

暂无评论

Chinese Journal of Aeronautics 2024年第4期37卷 593-608页

作者： Moqi SHEN Jia LIU Jingtao WANG Di ZHU college of mechanical and electrical engineering Nanjing University of Aeronautics and AstronauticsNanjing 210016China

To obtain final parts with the desired dimensional accuracy and repeatability via electrochemical machining(ECM), the machining process must enter an ECM balanced state. However,for the ECM processing of blisk, a key component of aerospace engines, the surface of the blade blank often has an uneven allowance distribution due to the narrow passage of the cascade. It is difficult to remedy this issue in subsequent processing steps, which is necessary to ensure the dimensional accuracy and repeatability of the final blade profile. To solve this problem, electrolytic machining must be preceded by electrolytic shaping, which requires cathode tools with large leveling ratios to quickly homogenize the blank surface of the blade. In this study, to obtain a cathode tool with an extremely high leveling ratio, a design method based on the variation in the electrode gap in the non-equilibrium electrolytic state is proposed, and a dissolution model based on the nonequilibrium state is established. In this design method, the allowance on the blank to be machined is first divided into many discrete allowances with the normal direction. The initial machining clearance, feed rate, and total machining time are then calculated using classical ECM equilibrium state theory based on the maximum allowance. Meanwhile, the point coordinates of the cathode tool at maximum allowance can be determined. The non-equilibrium model can then be used to calculate the relative coordinate positions corresponding to the remaining discrete allowances. Finally, the entire cathode tool profile is designed. Simulations, fundamental experiments, and blisk unit workpiece experiments were carried out to validate the design approach. In the simulated processing of the plane workpiece, the leveling ratio of the cathode tool designed by the proposed method(0.77)was 83% higher than that of the cathode tool designed using the traditional method. The simulation results were confirmed by processing experiments. In t

关键词： Electrochemical machining(ECM) Non-equilibrium machining Large leveling ratios Cathode design Finite element simulation Blisk

Comparison of electrochemical behaviors of Ti-5Al-2Sn-4Zr-4Mo-2Cr-1Fe and Ti-6Al-4V titanium alloys in NaNO_(3) solution

在线全文

学校读者我要写书评

暂无评论

International Journal of Minerals,Metallurgy and Materials 2024年第4期31卷 750-763页

作者： Jia Liu Shuanglu Duan Xiaokang Yue Ningsong Qu college of mechanical and electrical engineering Nanjing University of Aeronautics and AstronauticsNanjing 210016China

The Ti-5Al-2Sn-4Zr-4Mo-2Cr-1Fe(β-CEZ)alloy is considered as a potential structural material in the aviation industry due to its outstanding strength and corrosion *** machining(ECM)is an efficient and low-cost technology for manufacturing theβ-CEZ *** ECM,the machining parameter selection and tool design are based on the electrochemical dissolution behavior of the *** this study,the electrochemical dissolution behaviors of theβ-CEZ and Ti-6Al-4V(TC4)alloys in NaNO3solution are *** open circuit potential(OCP),Tafel polarization,potentiodynamic polarization,electrochemical impedance spectroscopy(EIS),and current efficiency curves of theβ-CEZ and TC4 alloys are *** results show that,compared to the TC4 alloy,the passivation film structure is denser and the charge transfer resistance in the dissolution process is greater for theβ-CEZ ***,the dissolved surface morphology of the two titanium-based alloys under different current densities are *** low current densities,theβ-CEZ alloy surface comprises dissolution pits and dissolved products,while the TC4 alloy surface comprises a porous honeycomb *** high current densities,the surface waviness of both the alloys improves and the TC4 alloy surface is flatter and smoother than theβ-CEZ alloy ***,the electrochemical dissolution models ofβ-CEZ and TC4 alloys are proposed.

关键词： electrochemical machining dissolution behavior β-CEZ titanium alloy polarization curve current efficiency

Modeling and Validation of Diamagnetic Rotor Levitated by Permanent Magnetics

在线全文

学校读者我要写书评

暂无评论

Chinese Journal of mechanical engineering 2024年第3期37卷 224-235页

作者： Yuanping Xu Yue Zhang Jin Zhou Chaowu Jin college of mechanical and electrical engineering Nanjing University of Aeronautics and AstronauticsNanjing 210016China

As an innovative,low-power consuming,and low-stiffness suspension approach,the diamagnetic levitation technique has attracted considerable interest because of its potential applicability in miniaturized mechanical *** foundation of a diamagnetic levitation system is mathematical modeling,which is essential for operating performance optimization and stability ***,few studies on systematic mathematical modeling have been *** this study,a systematic mathematical model for a disc-shaped diamagnetically levitated rotor on a permanent magnet array is *** on the proposed model,the magnetic field distribution characteristics,diamagnetic levitation force characteristics(i.e.,levitation height and stiffness),and optimized theoretical conditions for realizing stable levitation are *** are conducted to verify the feasibility of the proposed mathematical *** predictions and experimental results indicate that increasing the levitation height enlarges the stable ***,with a further increase in the rotor radius,the stable regions of the rotor gradually diminish and even ***,when the levitation height is fixed,a moderate rotor radius permits stable *** study proposes a mathematical modeling method for a diamagnetic levitation system that has potential applications in miniaturized mechanical systems.

关键词： Diamagnetic levitation Magnetic levitation Rotor Modeling Validation Stability

Switching,explosion,and chaos of multi-wavelength soliton states in ultrafast fiber lasers

在线全文

学校读者我要写书评

暂无评论

Science China(Physics,Mechanics & Astronomy) 2024年第7期67卷 82-90页

作者： Zhi-Zeng Si Yue-Yue Wang Chao-Qing Dai college of Optical Mechanical and Electrical EngineeringZhejiang A&F UniversityLin’an 311300China

Because of the complexity and difficulty of realizing a multi-wavelength soliton state,reports on its internal dynamic characteristics are *** this study,the switching and periodic soliton explosion processes of the multi-wavelength soliton state in a negative dispersion passively mode-locked fiber laser are *** generation of the multi-wavelength soliton state undergoes the process of noise,oscillation,and stable mode-locking,and the splitting and annihilation of solitons with different group velocities directly impact the generation and disappearance of three *** and negative dispersion lead to different group velocities of *** presence and displacement of solitons with different group velocities cause soliton collisions,which lead to soliton explosions.A soliton experiences relative phase oscillation,chaos,and oscillation,as well as convergence and separation before and after an *** an increase in parameters related to pump power,single-soliton oscillation,multi-wavelength solitons,and chaos are found in experiments and simulations,proving the relevance and reliability between simulation and experimental *** work promotes the dynamical study of multi-soliton collisions in nonlinear science and the development of chaos theory in multi-comb lasers.

关键词： multi-wavelength fiber laser soliton explosion chaos state switching real-time dynamics

同方期刊数据库

Method for Detecting Industrial Defects in Intelligent Manufacturing Using Deep Learning

在线全文

学校读者我要写书评

暂无评论

Computers, Materials & Continua 2024年第1期78卷 1329-1343页

作者： Bowen Yu Chunli Xie college of mechanical and electrical engineering Northeast Forestry UniversityHarbin150040China

With the advent of Industry 4.0,marked by a surge in intelligent manufacturing,advanced sensors embedded in smart factories now enable extensive data collection on equipment *** analysis of such data is pivotal for ensuring production safety,a critical factor in monitoring the health status of manufacturing *** defect detection techniques,typically limited to specific scenarios,often require manual feature extraction,leading to inefficiencies and limited versatility in the overall *** research presents an intelligent defect detection methodology that leverages deep learning techniques to automate feature extraction and defect localization *** proposed approach encompasses a suite of components:the high-level feature learning block(HLFLB),the multi-scale feature learning block(MSFLB),and a dynamic adaptive fusion block(DAFB),working in tandem to extract meticulously and synergistically aggregate defect-related characteristics across various scales and hierarchical *** have conducted validation of the proposed method using datasets derived from gearbox and bearing *** empirical outcomes underscore the superior defect detection capability of our *** demonstrates consistently high performance across diverse datasets and possesses the accuracy required to categorize defects,taking into account their specific locations and the extent of damage,proving the method’s effectiveness and reliability in identifying defects in industrial components.

关键词： Industrial defect detection deep learning intelligent manufacturing

Effect of nitrile butadiene rubber hardness on the sealing characteristics of hydraulic O-ring rod seals

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Journal of Zhejiang University-Science A(Applied Physics & engineering) 2024年第1期25卷 63-78页

作者： Xiaoxuan LI Bingqing WANG Xudong PENG Yuntang LI Xiaolu LI Yuan CHEN Jie JIN college of Quality and Safety engineering China Jiliang UniversityHangzhou310018China college of mechanical and electrical engineering China Jiliang UniversityHangzhou310018China college of mechanical engineering Zhejiang University of TechnologyHangzhou310023China

The nitrile butadiene rubber(NBR)hardness effect on the sealing characteristics of hydraulic O-ring rod seals is analyzed based on a mixed lubrication elastohydrodynamic *** studies are conducted to reveal the mechanism of the influence of rubber hardness on the static and dynamic behavior of *** optimized selections of rubber hardness are then investigated under different *** show that the low hardness seal is prone to stress concentration due to the extrusion effect under high pressure conditions;it is also more prone to leaking.A high hardness seal can better prevent leakage by reducing film thickness but it will cause large frictional power loss and increase the probability of wear *** choice of low hardness is recommended to reduce friction with the premise that leakage requirements are met.

关键词： Nitrile butadiene rubber(NBR)hardness Sealing characteristics Optimized selection O-ring seal