检索结果-南通市图书馆

Thermal and mechanical behavior of casting copper alloy wheel during wheel and belt continuous casting process

在线全文

同方期刊数据库

学校读者我要写书评

暂无评论

China Foundry 2024年第1期21卷 82-90页

作者： Kun Gao Yan Peng School of mechanical engineering Yanshan UniversityQinhuangdao 066004HebeiChina

To investigate the thermal and mechanical behavior of casting wheel,a two-dimensional thermoelastic-plastic finite element model was used to predict the temperature,stress and distortion distribution of the casting wheel during the wheel and belt continuous casting *** effects of grinding thickness and casting speed on the thermal and mechanical behaviors of the center of the hot face of the casting wheel were discussed in *** each rotation,the casting wheel passes through four different spray *** results show that the temperature distribution of the casting wheel in different spray zones is similar,the temperature of the hot face is the highest and the temperature reaches the peak in the spray zoneⅢ.The stress and distortion depend on the temperature distribution,and the maximum stress and distortion of the hot face are 358.2 MPa and 1.82 mm,*** temperature at the center of the hot face decreases with increasing grinding thickness and increases with increasing casting speed.

关键词： casting wheel finite element model grinding thickness casting speed hot face spray zones

Identification of Motor Nuclei in the Medulla Oblongata of Carp for Biological Control

在线全文

学校读者我要写书评

暂无评论

Journal of Bionic engineering 2024年第2期21卷 842-851页

作者： Yang Zhao Yong Peng Yudong Wen Lingjun Han Yanhong Yan Xueying Dong Hui Zhang Zheng Zhao Xiaoyue Liu School of Electrical engineering Yanshan UniversityQinhuangdao066004China School of mechanical engineering Yanshan UniversityQinhuangdao066004China Key Laboratory of National Defense of mechanical Structure and Material Science Under Extreme Conditions Yanshan UniversityQinhuangdao066004China institute of Marine Science and engineering Yanshan UniversityQinhuangdao066004China Shijiazhuang university Shijiazhuang050035China

Brain-controlled technology is the key technology in biological control,and the corresponding relationship between animal brain nuclei and motor behavior is the *** purpose of this study was to explore the motor nuclei of the medulla oblongata in *** carps were subjected to electrical stimulation and chemical stimulation experiments,respectively,in the water-free state,and the effective chemical stimulation sites were injected with the pontamine sky blue *** brain tissue sections were obtained by paraffin tissue section technology and the neutral red staining *** comparing the positions of the brain nuclei shown in earlier studies,the motor nerve nuclei in the medulla oblongata were *** brain electrode was implanted into the motor nucleus of the medulla oblongata,and the underwater control experiment and behavioral tests were carried out with different electrical stimulation *** results showed that the abducens nucleus(NVI)was the motor nucleus that controls the ipsilateral steering,and the facial nucleus(NVII)was the motor nucleus that controls the forward *** adjusting the stimulation voltage and the stimulation pulse number,the carp can be stably controlled to achieve a left–right steering motion of 30°–180°and a forward motion of more than 80 cm/*** study indicated that the quantitative control of the steering and forward behavior of the carp can be achieved by electrical stimulation of the NVI and NVII,which provided a certain experimental basis for the accurate control of the carp robot.

关键词： Biological control Carp Medulla oblongata motor nucleus Electrical stimulation technique Chemical stimulation technique

Effect of oxide inclusions on MnS precipitates and tensile mechanical property of high-strength low-alloy steel

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Journal of Iron and Steel Research International 2024年第5期31卷 1210-1220页

作者： Xiao-yong Gao Hong Wei Li-feng Zhang School of mechanical engineering Yanshan UniversityQinhuangdao066004HebeiChina School of Materials Science and engineering Yanshan UniversityQinhuangdao066004HebeiChina School of mechanical and Materials engineering North China University of TechnologyBeijing100144China

The key role of oxide inclusions on the microstructure and mechanical property of a high-strength low-alloy steel was *** field emission scanning electron microscope equipped with energy-dispersive spectrometry was used to characterize MnS *** inclusions play an important role in the shape control of MnS *** oxides fovored to decrease the size and the aspect ratio of MnS *** less oxide inclusions in the steel,approximately over 16.7%MnS precipitates were with aspect ratio a>5 and pure MnS precipitates accounted for 75.9%in ***,with more oxide inclusions in the steel,only 7.4%MnS precipitates were with a>5 and pure MnS precipitates accounted for 60.1%in *** of MnS by oxide inclusions improved the strength and inhibited the *** oxide inclusions in the steel increased the yield strength and tensile strength of the steel in both longitudinal and transverse directions,and lowered the anisotropy of the mechanical property.

关键词： High-strength low-alloy steel MnS Oxide inclusion mechanical property Anisotropy

Limits of Uneven Battery Power in Modular Multilevel Converter-based Battery Energy Storage Systems

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

CSEE Journal of Power and Energy Systems 2024年第2期10卷 686-695页

作者： Yao Pan Xiaofeng Sun Wei Zhao Xin Li Yao Cai institute of Electrical engineering Yanshan UniversityQinhuangdao 066004China

For modular multilevel converter-based battery energy storage systems (MMC-BESS), uneven power among batteries of SMs will be deduced by battery aging, battery fault, etc., which will degrade performance and even lead to system failure. For maintaining the balance of capacitor voltage, this paper analyzes the limits of the uneven power of batteries, which are presented as the current limits in this paper. According to analysis, an analytical method is proposed that only the dc and fundamental frequency components of the arm current are used to calculate current limits. With the current limits it is able to evaluate the reasonability of power distribution among batteries. Meanwhile, increase of fundamental frequency component will enhance the current limits, and the dc component determines the size relationship between the absolute values of the upper and lower current limits. Finally, simulation model and experiment prototype are built for verifying the theoretical analysis and current limits calculation method, and satisfactory results are provided.

关键词： Arm current balance of capacitor voltage current limits MMC-BESS uneven power

Effects of Sinusoidal Vibration of Crystallization Roller on Composite Microstructure of Ti/Al Laminated Composites by Twin-Roll Casting

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Journal of Wuhan university of Technology(Materials Science) 2024年第1期39卷 196-205页

作者：李励杜凤山 National engineering Research Center for Equipment and Technology of Cold Strip Rolling Yanshan UniversityQinhuangdao 066004China College of mechanical engineering Yanshan UniversityQinhuangdao 066004China

A new,innovative vibration cast-rolling technology of “electromagnetic stirring+dendrite breaking+asynchronous rolling” was proposed with the adoption of sinusoidal vibration of crystallization roller to prepare Ti/Al laminated composites,and the effect of sinusoidal vibration of crystallization roller on composite microstructure was investigated in *** results show that the metallurgical bonding of titanium and aluminum is realized by mesh interweaving and mosaic meshing,instead of transition bonding by forming metal compound *** meshing depth between titanium and aluminum layers (6.6μm) of cast-rolling materials with strong vibration of crystallization roller (amplitude 0.87 mm,vibration frequency 25 Hz) is doubled compared with that of traditional cast-rolling materials (3.1μm),and the composite interfacial strength(27.0 N/mm) is twice as high as that of traditional cast-rolling materials (14.9 N/mm).This is because with the action of high-speed superposition of strong tension along the rolling direction,strong pressure along the width direction and rolling force,the composite linearity evolves from "straight line" with traditional casting-rolling to "curved line",and the depth and number of cracks in the interface increases greatly compared with those with traditional cast-rolling,which leads to the deep expansion of the meshing area between interfacial layers and promotes the stable enhancement of composite quality.

关键词： laminated composites sinusoidal vibration composite microstructure

Design and Verification of Parallel Hip Exoskeleton Considering Output Torque Anisotropy

在线全文

学校读者我要写书评

暂无评论

Journal of Bionic engineering 2024年第3期21卷 1305-1320页

作者： Jilong Xu Yunzhan Niu Fucai Liu engineering Research Center of the Ministry of Education for Intelligent Control System and Intelligent Equipment Yanshan UniversityQinhuangdao066004China Key Laboratory of Industrial Computer Control engineering of Heibei Province Yanshan UniversityQinhuangdao066004China College of mechanical engineering Yanshan UniversityQinhuangdao066004China

In rehabilitation training,it is crucial to consider the compatibility between exoskeletons and human legs in ***,most exoskeletons today adopt an anthropomorphic serial structure,which results in rotational centers that are not precisely aligned with the center of the hip *** address this issue,we introduce a novel exoskeleton called the Parallel Hip Exoskeleton(PH-Exo)in this ***-Exo is meticulously designed based on the anisotropic law of output *** the friction of the drive components,a dynamic model of the human-machine complex is *** analysis demonstrates that PH-Exo not only exhibits outstanding torque performance but also achieves high controllability in both flexion/extension and adduction/abduction ***,a robust controller is designed to address model uncertainty,friction,and external *** experiments indicate that under the control of the robust controller,each motor achieves excellent tracking performance.

关键词： Hip exoskeleton Parallel mechanism Misalignment Anisotropy Output torque

Numerical simulation on the multiphase flow and reoxidation of the molten steel in a two-strand tundish during ladle change

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

International Journal of Minerals,Metallurgy and Materials 2024年第7期31卷 1540-1553页

作者： Jingcheng Wang Zhentong Liu Wei Chen Hongliang Chen Lifeng Zhang School of mechanical engineering Yanshan UniversityQinhuangdao 066004China School of Materials Science and engineering Tianjin UniversityTianjin 300350China School of mechanical and Materials engineering North China University of TechnologyBeijing 100144China

A 3D mathematical model was proposed to investigate the molten steel–slag–air multiphase flow in a two-strand slab continuous casting(CC)tundish during ladle *** study focused on the exposure of the molten steel and the subsequent reoxidation *** exposure of the molten steel was calculated using the coupled realizable k–εmodel and volume of fluid(VOF)*** diffusion of dissolved oxygen was determined by solving the user-defined scalar(UDS)***,the user-defined function(UDF)was used to describe the source term in the UDS equation and determine the oxidation rate and oxidation *** effect of the refilling speed on the molten steel exposure and dissolved oxygen content was also *** the refilling speed during ladle change reduced the refilling time and the exposure duration of the molten ***,the elevated refilling speed enlarged the slag eyes and increased the average dissolved oxygen content within the tundish,thereby exacerbating the reoxidation *** addition,the time required for the molten steel with a high dissolved oxygen content to exit the tundish varied with the refilling *** the inlet speed was 3.0 m·s^(-1)during ladle change,the molten steel with a high dissolved oxygen content exited the outlet in a short period,reaching a maximum dissolved oxygen content of 0.000525wt%.Conversely,when the inlet speed was 1.8 m·s^(-1),the maximum dissolved oxygen content was 0.000382wt%.The refilling speed during the ladle change process must be appropriately decreased to minimize reoxidation effects and enhance the steel product quality.

关键词： tundish ladle change reoxidation multiphase flow numerical simulation

Aggregation of CeAlO_(3) inclusions in heavy ingot of a steel containing 0.007% aluminum

在线全文

学校读者我要写书评

暂无评论

Journal of Iron and Steel Research International 2024年第8期31卷 1960-1972页

作者： Qiu-yue Zhou Jun-tao Ba Lun Zhang Wei Chen Ying Ren Li-feng Zhang School of Metallurgical and Ecological engineering University of Science and Technology BeijingBeijing 100083China School of mechanical engineering Yanshan UniversityQinhuangdao 066004HebeiChina School of mechanical and Materials engineering North China University of TechnologyBeijing 100144China

The distribution of inclusions at the bottom of a Ce-treated heavy steel ingot was detected and *** three-dimensional morphology and spatial distribution of CeAlOs clusters were characterized using the electrolytic extraction and Micro-CT detection.A model of inclusion collision to predict the aggregation of CeAlO_(3) inclusions in the ingot was established and validated by measured *** were mainly CeAlO_(3) and a small amount of Ce_(2)O_(2)S in the tundish after cerium *** collision and aggregation of inclusions led to the formation of large clusters in the ingot during the solidification *** slag entrainment inclusions,large CeAO_(3) clusters and small CeAlO_(3) particles were observed from the center to the edge of the ingot *** inclusions were mainly concentrated at the *** number density of inclusions larger than 200μm was 0.21 mm^(-3).The maximum diameter of CeA1O_(3) clusters was 1340μ*** the edge to the radial center and from the bottom to the top,the average diameter of inclusions gradually increased due to the longer solidification time of the ingot.

关键词： Inclusion Heavy ingot Cerium treatment Collision

Effect of interlayer bonded bilayer graphene on friction

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Chinese Physics B 2024年第8期33卷 389-395页

作者：李耀隆田振国尹海峰张任良 Hebei Key Laboratory of mechanical Reliability for Heavy Equipment and Large Structures Yanshan UniversityQinhuangdao 066004China School of Civil engineering and Mechanics Yanshan UniversityQinhuangdao 066004China

We study the friction properties of interlayer bonded bilayer graphene by simulating the movement of a slider on the surface of bilayer graphene using molecular *** results show that the presence of the interlayer covalent bonds due to the local sp^(3) hybridization of carbon atoms in the bilayer graphene seriously reduces the frictional coefficient of the bilayer graphene surface to 30%,depending on the coverage of interlayer sp^(3) bonds and normal *** a certain coverage of interlayer sp3bonds,when the normal load of the slider reaches a certain value,the surface of this interlayer bonded bilayer graphene will lose the friction reduction effect on the *** findings provide guidance for the regulation and manipulation of the frictional properties of bilayer graphene surfaces through interlayer covalent bonds,which may be useful for applications of friction related graphene based nanodevices.

关键词： nanoscale friction molecular dynamic simulation bilayer graphene interlayer covalent bond