检索结果-南通市图书馆

Towards a new avenue for rapid synthesis of electrocatalytic electrodes via laser-induced hydrothermal reaction for water splitting

引用

International Journal of Extreme Manufacturing 2024年第1期6卷 340-351页

作者： Yang Sha Menghui Zhu Kun Huang Yang Zhang Francis Moissinac Zhizhou Zhang Dongxu Cheng Paul Mativenga Zhu Liu Department of Materials School of Natural SciencesThe University of ManchesterOxford RoadManchester M139PLUnited Kingdom Laser Processing research centre Department of MechanicalAerospace and Civil EngineeringSchool of EngineeringThe University of ManchesterOxford RoadManchester M139PLUnited Kingdom National Graphene Institute The University of ManchesterOxford RoadManchester M139PLUnited Kingdom Department of Chemical Engineering and Analytical Science School of EngineeringThe University of ManchesterOxford RoadManchester M139PLUnited Kingdom research centre for Laser Extreme Manufacturing Ningbo Institute of Materials Engineering and TechnologyChinese Academy of SciencesNingboPeople’s Republic of China

Electrochemical production of hydrogen from water requires the development ofelectrocatalysts that are active,stable,and low-cost for water *** address these challenges,researchers are increasingly exploring binder-free electrocatalytic integratedelectrodes (IEs) as an alternative to conventional powder-based electrode preparation methods,for the former is highly desirable to improve the catalytic activity and long-term stability for large-scale applications of ***,we demonstrate a laser-inducedhydrothermal reaction (LIHR) technique to grow NiMoO4nanosheets on nickel foam,which is then calcined under H2/Ar mixed gases to prepare the IE *** electrode exhibits superior hydrogen evolution reaction performance,requiring overpotentials of 59,116 and143 mV to achieve current densities of 100,500 and 1000 mA·*** the 350 h chronopotentiometry test at current densities of 100 and 500 m A·cm-2,the overpotentialremains essentially *** addition,NiFe-layered double hydroxide grown on Ni foam is also fabricated with the same LIHR method and coupled with IE-NiMo-IR to achieve water *** combination exhibits excellent durability under industrial current *** energy consumption and production efficiency of the LIHR method are systematicallycompared with the conventional hydrothermal *** LIHR method significantly improves the production rate by over 19 times,while consuming only 27.78%of the total energy required by conventional hydrothermal methods to achieve the same production.

关键词： electrocatalytic electrode laser-induced hydrothermal reaction NiFe layered double hydroxides hydrogen evolution reaction water splitting energy consumption production rate

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Customized scaffolds for large bone defects using 3D‑printed modular blocks from 2D‑medical images

引用

Bio-Design and Manufacturing 2024年第1期7卷 74-87页

作者： Anil AAcar Evangelos Daskalakis Paulo Bartolo Andrew Weightman Glen Cooper Gordon Blunn Bahattin Koc Faculty of Engineering and Natural Sciences Sabanci UniversityIstanbul 34956Türkiye D Bioprinting Laboratory Sabanci University Nanotechnology Research and Application CenterIstanbul 34956Türkiye School of Mechanical Aerospace and Civil EngineeringManchester Institute of BiotechnologyUniversity of ManchesterManchester M139PLUK Singapore centre for 3D Printing School of Mechanical and Aerospace EngineeringNanyang Technological UniversitySingapore 639798Singapore School of Pharmacy and biomedical Sciences University of PortsmouthPortsmouth PO12UPUK

Additive manufacturing(AM)has revolutionized the design and manufacturing of patient-specific,three-dimensional(3D),complex porous structures known as scaffolds for tissue engineering *** use of advanced image acquisition techniques,image processing,and computer-aided design methods has enabled the precise design and additive manufacturing of anatomically correct and patient-specific implants and ***,these sophisticated techniques can be timeconsuming,labor-intensive,and ***,the necessary imaging and manufacturing equipment may not be readily available when urgent treatment is needed for trauma *** this study,a novel design and AM methods are proposed for the development of modular and customizable scaffold blocks that can be adapted to fit the bone defect area of a *** modular scaffold blocks can be combined to quickly form any patient-specific scaffold directly from two-dimensional(2D)medical images when the surgeon lacks access to a 3D printer or cannot wait for lengthy 3D imaging,modeling,and 3D printing during *** proposed method begins with developing a bone surface-modeling algorithm that reconstructs a model of the patient’s bone from 2D medical image measurements without the need for expensive 3D medical imaging or *** algorithm can generate both patient-specific and average bone ***,a biomimetic continuous path planning method is developed for the additive manufacturing of scaffolds,allowing porous scaffold blocks with the desired biomechanical properties to be manufactured directly from 2D data or *** algorithms are implemented,and the designed scaffold blocks are 3D printed using an extrusion-based AM *** and instructions are also provided to assist surgeons in assembling scaffold blocks for the self-repair of patient-specific large bone defects.

关键词： Additive manufacturing Modular scaffolds Large bone defect Customized scaffold design Patient-specific scaffolds

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

In vitro investigations on the effects of graphene and graphene oxide on polycaprolactone bone tissue engineering scaffolds

引用

Bio-Design and Manufacturing 2024年第5期7卷 651-669页

作者： Yanhao Hou Weiguang Wang Paulo Bartolo School of Engineering Faculty of Science and EngineeringThe University of ManchesterManchesterUK Singapore centre for 3D Printing School of Mechanical and Aerospace EngineeringNanyang Technological UniversitySingaporeSingapore

Polycaprolactone(PCL)scaffolds that are produced through additive manufacturing are one of the most researched bone tissue engineering structures in the *** to the intrinsic limitations of PCL,carbon nanomaterials are often investigated to reinforce the PCL *** several studies that have been conducted on carbon nanomaterials,such as graphene(G)and graphene oxide(GO),certain challenges remain in terms of the precise design of the biological and nonbiological properties of the *** paper addresses this limitation by investigating both the nonbiological(element composition,surface,degradation,and thermal and mechanical properties)and biological characteristics of carbon nanomaterial-reinforced PCL scaffolds for bone tissue engineering *** showed that the incorporation of G and GO increased surface properties(reduced modulus and wettability),material crystallinity,crystallization temperature,and degradation ***,the variations in compressive modulus,strength,surface hardness,and cell metabolic activity strongly depended on the type of ***,a series of phenomenological models were developed based on experimental results to describe the variations of scaffold’s weight,fiber diameter,porosity,and mechanical properties as functions of degradation time and carbon nanomaterial *** results presented in this paper enable the design of three-dimensional(3D)bone scaffolds with tuned properties by adjusting the type and concentration of different functional fillers.

关键词： Additive manufacturing Bone tissue engineering Carbon nanomaterial Graphene Graphene oxide Scaffold

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Ballistic design and testing of a composite armour reinforced by CNTs suitable for armoured vehicles

引用

Defence Technology（防务技术） 2024年第2期32卷 173-195页

作者： Evangelos Ch.Tsirogiannis Evangelos Daskalakis Mohamed H.Hassan Abdalla M.Omar Paulo Bartolo EODH SA Research and Development DepartmentLakkoma Chalkidikis63080Greece School of Mechanical Aerospace and Civil EngineeringUniversity of ManchesterManchesterM139PLUK Singapore centre for 3D Printing School of Mechanical and Aerospace EngineeringNanyang Technological University639798Singapore

This paper is investigating the use of composite armour reinforced by nanomaterials, for the protection of light armoured(LAV) and medium armoured military vehicles(MAV), and the interaction between the composite materials and high-performance ballistic projectiles. Four armour materials, consisted of front hybrid fibre reinforced polymer cover layer, ceramic strike-face, fibre reinforced polymer intermediate layer and the metal matrix composite reinforced backplate, were manufactured and assembled by adhesive technology. The proposed laminated protection system is suitable for armoured ground vehicles;however, it could be used as armour on ground, air and naval platforms. The design of the protection system, including material selection and thickness, was elaborated depending on the performance requirements of Level 4 + STANAG 4569 military standard(projectile 14.5 mm × 114 mm API B32) and especially on a design philosophy which is analysed with the specifications. The backplate of this new composite is a hybrid material of Metal Matrix Composite(MMC) reinforced with carbon nanotubes(CNTs), manufactured with the use of powder metallurgy technique. The composite backplate material was morphologically, mechanically and chemically analysed. Results show that all plates are presenting high mechanical properties and ballistic characteristics, compared to commonly used armour plates. Real military ballistic tests according to AEP-STANAG 4569 were carried out for the total composite armour systems. After the ballistic tests, AA2024-CNT3 showed the best protection results, compared with the other plates(AA2024-CNT1 and AA2024-CNT2), with the projectile being unable to fully penetrate the composite plate.

关键词： Passive armour protection Protective armour Ballistic performance Hybrid composites Vehicle protection

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Effect of Mn Addition and Heat Treatment on the Corrosion Behaviour of Mg-Ag-Mn Alloy

引用

Acta Metallurgica Sinica(English Letters) 2024年第4期37卷 665-677页

作者： You Lv Yupeng Zhang Xi Liu Zehua Dong Xiaorong Zhou Xinxin Zhang Key Laboratory of Material Chemistry for Energy Conversion and Storage Ministry of EducationHubei Key Laboratory of Material Chemistry and Service FailureSchool of Chemistry and Chemical EngineeringHuazhong University of Science and TechnologyWuhan430074China Hubei Engineering research centre for Biomaterials and Medical Protective Materials Huazhong University of Science and TechnologyWuhan430074China Corrosion and Protection centre Department of MaterialsThe University of ManchesterManchesterM139PLUK

The high corrosion sensitivity and the potential bio-toxicity of Mg-Ag alloys limit their wide applications for the production of implanted devices. In the present work, Mn is added into the Mg-Ag alloy to optimize its corrosion behaviour. The corrosion behaviour of Mg-Ag-Mn alloys is investigated with the underlying microstructural factors examined. The Mg-Ag alloy with 2 wt% Mn exhibits the highest corrosion resistance after post-casting heat treatment at 440 ℃. The addition of Mn results in α-Mn phase with the incorporation of Fe, which suppresses the cathodic activity of impurity Fe. Further, heat treatment of the cast alloys homogenizes the distribution of Ag and promotes the precipitation of α-Mn phase. The former removes Ag segregations as potential cathodes;the latter promotes a more uniform distribution of cathodes and, therefore, prevents localized corrosion.

关键词： Mg-Ag alloy Mn addition Post-casting heat treatment Cathodic activity Corrosion mechanism

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Astrocytes dynamically regulate the blood-brain barrier in the healthy brain

引用

Neural Regeneration research 2024年第4期19卷 709-710页

作者： AgnėPociūtė Augustas Pivoriūnas Alexei Verkhratsky Department of Stem Cell Biology State Research Institute Centre for Innovative MedicineVilniusLithuania Faculty of Biology Medicine and HealthThe University of ManchesterManchesterUK Achucarro centre for Neuroscience IKERBASQUEBasque Foundation for ScienceBilbaoSpain Department of Forensic Analytical Toxicology School of Forensic MedicineChina Medical UniversityShenyangLiaoning ProvinceChina

The blood-brain barrier(BBB)(discovered and defined by Max Lewandowsky and Lina Stern,and not,as it is universally,and yet erroneously believed,by Paul Ehrlich(Verkhratsky and Pivoriunas,2023))that separates the nervous system from the circulation is evolutionarily conserved from arthropods to *** primeval BBB of the invertebrates and some early vertebrates was made solely by glial cells and secured(in invertebrates)by septate junctions.

关键词： Ehrlich barrier blood

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Endoscopic treatment of scarred polyps with a non-thermal device(Endorotor):A review of the literature

引用

World Journal of Gastroenterology 2024年第12期30卷 1706-1713页

作者： Mariam Zaghloul Hameed Rehman Stefano Sansone Konstantinos Argyriou Adolfo Parra-Blanco Department of Hepatology Gastroenterology and Infectious DiseasesKafrelsheikh UniversitKafr-Elshikh 33516Egypt Department of Gastroenterology Service Nottingham City Hospital CampusNottingham University Hospitals NHS TrustNottingham NG51PBUnited Kingdom Department of Gastroenterology University Hospital of LarissaLarissa 41334Greece nihr Nottingham biomedical research centre Nottingham University Hospitals NHS Trust and University of NottinghamNottingham NG72UHUnited Kingdom

Endoscopic resection(ER)of colorectal polyps has become a daily practice in most endoscopic units providing a colorectal cancer screening program and requires the availability of local experts and high-end endoscopic *** procedures have evolved over the past few years from endoscopic mucosal resection(EMR)to more advanced techniques,such as endoscopic submucosal dissection and endo-scopic full-thickness *** resection and disease eradication are the ultimate goals of ER-based techniques,and novel devices have been developed to achieve these *** EndoRotor®Endoscopic Powered Resection System(Interscope Medical,Inc.,Northbridge,Massachusetts,United States)is one such *** EndoRotor is a powered resection tool for the removal of alimentary tract mucosa,including post-EMR persistent lesions with scarring,and has both CE Mark and FDA *** review covers available published evidence documenting the usefulness of EndoRotor for the management of recurrent colorectal polyps.

关键词： EndoRotor Scarred polyps Recurrent polyps Colorectal cancer Colorectal polyps

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Statistical analysis and interpretation on lightning impulse breakdown voltages of ester liquids under varying field uniformity

引用

High Voltage 2024年第1期9卷 22-34页

作者： Haichuan Yu Qiang Liu Zhongdong Wang Department of Electrical and Electronic Engineering The University of ManchesterManchesterUK Department of Engineering University of ExeterExeterUK

Ester liquids(ELs),as the alternative transformer liquids to the conventional mineral oils(MOs),have been increasingly used in power transformers with high voltage *** various properties,the lightning impulse breakdown voltages(LIBDVs)have been studied elaborately in the past two decades under different electric field *** electric field uniformities do have an effect on the breakdown characteristics,for example,breakdown mechanisms,polarity effects,and differences of LIBDV between ELs and MOs,which is quantitatively investigated based on the LIBDVs collected from the *** breakdown mechanism transition phenomenon between streamer initiation dominated breakdown and streamer propagation dominated breakdown has been reviewed ***,the transition field factor boundaries to observe the polarity effect on LIBDVs are taken at around 20 for ELs and 10 for ***,the transition field factor boundaries to observe the LIBDV distinctions between ELs and MOs are about 109 and 14 under positive and negative lightning impulse,*** systematic analysis and interpretation on the transition field factor boundaries among different phenomena can provide insights on insulation design of ELs filled power transformers.

关键词： field lightning breakdown

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Technical Perspective:research on General-Purpose Brain-Inspired Computing Systems

引用

Journal of Computer Science & Technology 2024年第1期39卷 1-3页

作者： Oliver Rhodes Department of Computer Science University of ManchesterManchester M139PLU.K

Brain-inspired computing is a popular research area with the potential to advance our understanding of brain function,artificial intelligence,and next-generation computing *** referred to as"neuromorphic",these systems and algorithms hope to harness mechanisms present in brains to make step changes in perfor-mance over regular von Neumann based approaches[1].

关键词： artificial computing Brain

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Metabolic reprogramming by Syntenin-1 directs RA FLS and endothelial cell-mediated inflammation and angiogenesis

引用

Cellular & Molecular Immunology 2024年第1期21卷 33-46页

作者： Anja Meyer Stephanie R.Zack Wes Nijim Adel Burgos Vishwa Patel Brian Zanotti Michael V.Volin M.Asif Amin Myles J.Lewis Costantino Pitzalis Shiva Arami Joseph A.Karam Nadera J.Sweiss Shiva Shahrara Jesse Brown VA Medical Center ChicagoILUSA Department of Medicine Division of RheumatologyThe University of Illinois at ChicagoChicagoILUSA Department of Microbiology and Immunology Midwestern UniversityDowners GroveILUSA Division of Rheumatology and Clinical Autoimmunity Center of Excellence University of MichiganAnn ArborMIUSA centre for Experimental Medicine and Rheumatology William Harvey Research InstituteBarts and The London School of Medicine and DentistryQueen Mary University of LondonLondonUnited Kingdom centre for Experimental Medicine&Rheumatology William Harvey Research InstituteQueen Mary University of London and Barts NIHR BRC&NHS TrustLondonUK Department of biomedical Sciences Humanitas Universityand Humanitas Research HospitalMilanItaly Department of Orthopedic Surgery the University of Illinois at ChicagoChicagoILUSA

A novel rheumatoid arthritis(RA)synovial fluid protein,Syntenin-1,and its receptor,Syndecan-1(SDC-1),are colocalized on RA synovial tissue endothelial cells and fibroblast-like synoviocytes(FLS).Syntenin-1 exacerbates the inflammatory landscape of endothelial cells and RA FLS by upregulating transcription of IRF1/5/7/9,IL-1β,IL-6,and CCL2 through SDC-1 ligation and HIF1α,or mTOR ***,Syntenin-1 orchestrates RA FLS and endothelial cell invasion via SDC-1 and/or mTOR *** Syntenin-1 reprogrammed endothelial cells,the dynamic expression of metabolic intermediates coincides with escalated glycolysis along with unchanged oxidative factors,AMPK,PGC-1α,citrate,and inactive oxidative ***,RA FLS rewired by Syntenin-1 displayed a modest glycolytic-ATP accompanied by a robust mitochondrial-ATP *** enriched mitochondrial-ATP detected in Syntenin-1 reprogrammed RA FLS was coupled with mitochondrial fusion and fission recapitulated by escalated Mitofusin-2 and DRP1 *** found that VEGFR1/2 and Notch1 networks are responsible for the crosstalk between Syntenin-1 rewired endothelial cells and RA FLS,which are also represented in RA *** to RA explants,morphological and transcriptome studies authenticated the importance of VEGFR1/2,Notch1,RAPTOR,and HIF1αpathways in Syntenin-1 arthritic mice and their obstruction in SDC-1 deficient ***,dysregulation of SDC-1,mTOR,and HIF1αnegated Syntenin-1 inflammatory phenotype in RA explants,while inhibition of HIF1αimpaired synovial angiogenic imprint amplified by *** conclusion,since the current therapies are ineffective on Syntenin-1 and SDC-1 expression in RA synovial tissue and blood,targeting this pathway and its interconnected metabolic intermediates may provide a novel therapeutic strategy.

关键词： Syntenin-1 Syndecan-1 RA FLS RA explants immunometabolism

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

欢迎您,

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

请选择保存的检索档案：

请选择收藏分类：

通借通还

欢迎您,

建议与咨询 留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

请选择保存的检索档案： 新增检索档案 确定 取消

请选择收藏分类： 新增自定义分类 确定 取消

通借通还

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

请选择保存的检索档案：

请选择收藏分类：