检索结果-南通市图书馆

An approach of the internal friction-dependent temperature changes for conventional and pure biogenic lubricating greases

引用

Friction 2024年第4期12卷 780-795页

作者： Leif AHME Erik KUHN MiguelÁngel DELGADO department of Mechanical Engineering and production management Hamburg University of Applied SciencesHamburg 20099Germany department of Chemical Engineering Research in Product Technology and Chemical Processes(Pro2TecS)University of HuelvaHuelva 21071Spain

This work investigated the temperature changes inside the bulk of lubricating greases under controlled high-shear stress conditions(250-500 s-1).For this purpose,a newly developed temperature-measuring cell called Calidus was successfully *** temperature changes(ΔT)have been related to the greases'components(thickener,base oil-type,and composition)and the structural degradation of the lubricating ***,a theoretical approach was proposed for calculating the internal temperature change of lubricating greases during shear *** greases showed an internal temperature profile characterised by a sudden rise inΔT within the first 4 h from starting the test and subsequentΔT decay until it reaches the steady state ***,it was found that greases C1 and C5,formulated with lithium and calcium soap,respectively,with different soap content(16.1 wt%and 9.7 wt%,respectively),but the same base castor oil,showed the highest value of the maximumΔT,c.a.3.2 K,and the most drastic drop ofΔ*** greases showed both the highest specific densities and heat *** addition,they showed the lowest ratio of expended energies(Rtee),which means more structural degradation in the stressed *** the contrary,the grease C3,with 13 wt%of Li-soap but the lowest base oil's viscosity,showed the lowest maximumΔT and the temperature profile was characterised by a moderate variation ofΔT along the *** biogenic grease B3 developed a low-temperature change in the group of pure bio-genic greases close to grease C3.

关键词： shear-induced structural degradation rheology temperature measurements lubricating greases density lubricating greases specific heat capacities

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Gut microbiota intervention attenuates thermogenesis in broilers exposed to high temperature through modulation of the hypothalamic 5‑HT pathway

引用

Journal of Animal Science and Biotechnology 2024年第2期15卷 679-698页

作者： Sheng Li Xiaoqing Li Kai Wang Yansen Li Kentaro Nagaoka Chunmei Li Research Centre for livestock Environmental Control and Smart production College of Animal Science and TechnologyNanjing Agricultural UniversityNanjing 210095China Laboratory of Veterinary Physiology Department of Veterinary MedicineFaculty of AgricultureTokyo University of Agriculture and TechnologyTokyo 183‑8509Japan

Background Broilers have a robust metabolism and high body temperature,which make them less tolerant to hightemperature(HT)environments and more susceptible to challenges from elevated *** microbes,functioning as symbionts within the host,possess the capacity to significantly regulate the physiological functions and environmental adaptability of the *** study aims to investigate the effects of gut microbial intervention on the body temperature and thermogenesis of broilers at different ambient temperatures,as well as the underlying mechanism involving the"gut-brain"*** Broilers were subjected to gut microbiota interference with or without antibiotics(control or ABX)starting at 1 day of *** 21 day of age,they were divided into 4 groups and exposed to different environments for 7 d:The control and ABX groups at room temperature(RT,24±1℃,60%relative humidity(RH),24 h/d)and the control-HT and ABX-HT groups at high temperature(HT,32±1℃,60%RH,24 h/d).Results The results demonstrated that the antibiotic-induced gut microbiota intervention increased body weight and improved feed conversion in broiler chickens(P<0.05).Under HT conditions,the microbiota intervention reduced the rectal temperature of broiler chickens(P<0.05),inhibited the expression of avUCP and thermogenesisrelated genes in breast muscle and liver(P<0.05),and thus decreased thermogenesis ***,the gut microbiota intervention blunted the hypothalamic‒pituitary‒adrenal axis and hypothalamic–pituitary–thyroid axis activation induced by HT *** analyzing the cecal microbiota composition of control and ABX chickens maintained under HT conditions,we found that Alistipes was enriched in control *** contrast,antibioticinduced gut microbiota intervention resulted in a decrease in the relative abundance of Alistipes(P<0.05).Moreover,this difference was accompanied by increased hypothalamic 5-hydroxytryptamine(5-HT)content and TPH2 expression(P<0.05).Conclus

关键词： 5-HT Broiler chickens Gut microbiota Thermogenesis Thermoregulation

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Improvement of Surface Mechanical and Tribological Characteristics of L-PBF Processed Commercially Pure Titanium through Ultrasonic Impact Treatment

引用

Acta Metallurgica Sinica(English Letters) 2024年第6期37卷 1034-1046页

作者： Iman Ansarian Reza Taghiabadi Saeid Amini Mohammad Hossein Mosallanejad Luca Iuliano Abdollah Saboori department of Materials Science and Metallurgy Imam Khomeini International University(IKIU)QazvinIran department of Mechanical Engineering University of KashanKashanIran Integrated Additive Manufacturing Center Department of Management and Production EngineeringPolitecnico di TorinoCorso Duca Degli Abruzzi 2410129TurinItaly

Multi-pass ultrasonic impact treatment(UIT)was applied to modify the microstructure and improve the mechanical and tribological characteristics at the near-surface region of commercially pure Ti(CP-Ti)specimens produced by the laser powder bed fusion(L-PBF)*** considerably refined the L-PBF process-related acicular martensites(α′-M)and produced a well-homogenized and dense surface microstructure,where the porosity content of 1-,3-,and 5-pass UITed samples was reduced by 43,60,and 67%,*** UITed samples showed an enhancement in their near-surface mechanical properties up to a depth of about 300μ*** nanoindentation results for the 3-pass UITed sample revealed an increase of about 53,45,and 220%in its nanohardness,H/E_(r),and H_(3)/E_(r)^(2)indices,*** stylus profilometry results showed that performing the UIT removed the L-PBF-related features/defects and offered a smooth *** roughness average(R_(a))and the skewness(R_(sk))of the 3-pass UITed sample were found to be lower than those of the L-PBFed sample by 95 and 223%,*** the UIT also enhanced the material ratio,where the maximum load-bearing capacity(~100%)in as-L-PBFed(as-built)and 3-pass UITed samples was obtained at 60-and 10-µm depths,*** tribological investigations showed that applying the UIT resulted in a significant reduction of wear rate and average coefficient of friction(COF)of *** instance,under the normal pressures of 0.05 and 0.2 MPa,the wear rate and COF of the 3-pass UITed sample were lower than those of the L-PBFed sample by 65 and 58%,and 20 and 17%,respectively.

关键词： Laser powder bed fusion Ultrasonic impact treatment Commercially pure Ti(CP-Ti) Surface mechanical properties Tribological properties

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

The Lambert-G Family:Properties,Inference,and Applications

引用

Computer Modeling in Engineering & Sciences 2024年第7期140卷 513-536页

作者： Jamal N.Al Abbasi Ahmed Z.Afify Badr Alnssyan Mustafa S.Shama Accounting department Ashur UniversityBaghdad10011Iraq department of Statistics Mathematics and InsuranceBenha UniversityBenha13511Egypt department of management Information Systems and production management College of Business and EconomicsQassim UniversityBuraydah51452Saudi Arabia department of Basic Sciences Common First Year(CFY)King Saud UniversityRiyadh11362Saudi Arabia department of Mathematics and Statistics Osim Higher Institute of Administrative ScienceOsim12961Egypt

This study proposes a new flexible family of distributions called the Lambert-G *** Lambert family is very flexible and exhibits desirable *** three-parameter special sub-models provide all significantmonotonic and non-monotonic failure rates.A special sub-model of the Lambert family called the Lambert-Lomax(LL)distribution is *** expressions for the LL statistical properties are *** of the LL distribution are addressed mathematically based on its hazard *** estimation of the LL parameters is discussed using six estimation *** performance of this estimation method is explored through simulation *** usefulness and flexibility of the LL distribution are demonstrated empirically using two real-life data *** LL model better fits the exponentiated Lomax,inverse power Lomax,Lomax-Rayleigh,power Lomax,and Lomax distributions.

关键词： Lambert function Lomax distribution maximum likelihood hazard function statistical model simulation

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

A novel low-cost visual ear tag based identification system for precision beef cattle livestock farming

引用

Information Processing in Agriculture 2024年第1期11卷 117-126页

作者： Andrea Pretto Gianpaolo Savio Flaviana Gottardo Francesca Uccheddu Gianmaria Concheri department of Civil Environmental and Architectural EngineeringUniversity of PaduaItaly department of Animal Medicine Production and HealthUniversity of PadovaItaly department of Industrial Engineering University of PadovaItaly

The precision livestock farming(PLF)has the objective to maximize each animal's performance while reducing the environmental impact and maintaining the quality and safety of meat *** the PLF techniques,the personalised management of each individual animal based on sensors systems,represents a viable *** is worth noting that the implementation of an effective PLF approach can be still expensive,especially for small and medium-sized farms;for this reason,to guarantee the sustainability of a customized livestock management system and encourage its use,plug and play and cost-effective systems are *** this context,we present a novel low-cost method for identifying beef cattle and recognizing their basic activities by a single surveillance *** leveraging the current state-of-the-art methods for real-time object detection,(i.e.,YOLOv3)cattle's face areas,we propose a novel mechanism able to detect the ear tag as well as the water ingestion state when the cattle is close to the *** cow IDs are read by an Optical Character Recognition(OCR)algorithm for which,an ad hoc error correction algorithm is here presented to avoid numbers misreading and correctly match the IDs to only actually present *** to the detection of the tag position,the OCR algorithm can be applied only to a specific region of interest reducing the computational cost and the time *** times for the areas are outputted as cattle activity recognition *** results demonstrate the effectiveness of our proposed method,showing a mAP@0.50 of 89%.

关键词： Precision livestock farming Deep learning Cattlei dentification Low-cost sensors Computer vision

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Hybrid modeling for carbon monoxide gas-phase catalytic coupling to synthesize dimethyl oxalate process

引用

Chinese Journal of Chemical Engineering 2024年第6期70卷 234-250页

作者： Shida Gao Cuimei Bo Chao Jiang Quanling Zhang Genke Yang Jian Chu Ningbo Artificial Intelligence Institute Shanghai Jiao Tong UniversityNingbo 315012China department of Automation Shanghai Jiao Tong UniversityShanghai 200240China Key Laboratory of Industrial Internet+Safety production of Hazardous Chemical Ministry of Emergency ManagementNanjing Tech UniversityNanjing 211816China

Ethylene glycol(EG)plays a pivotal role as a primary raw material in the polyester industry,and the syngas-to-EG route has become a significant technical route in *** carbon monoxide(CO)gas-phase catalytic coupling to synthesize dimethyl oxalate(DMO)is a crucial process in the syngas-to-EG route,whereby the composition of the reactor outlet exerts influence on the ultimate quality of the EG product and the energy consumption during the subsequent separation ***,measuring product quality in real time or establishing accurate dynamic mechanism models is *** effectively model the DMO synthesis process,this study proposes a hybrid modeling strategy that integrates process mechanisms and data-driven *** CO gas-phase catalytic coupling mechanism model is developed based on intrinsic kinetics and material balance,while a long short-term memory(LSTM)neural network is employed to predict the macroscopic reaction rate by leveraging temporal relationships derived from archived *** proposed model is trained semi-supervised to accommodate limited-label data scenarios,leveraging historical *** integrating these predictions with the mechanism model,the hybrid modeling approach provides reliable and interpretable forecasts of mass *** investigations unequivocally validate the superiority of the proposed hybrid modeling approach over conventional data-driven models(DDMs)and other hybrid modeling techniques.

关键词： Carbon monoxide Dynamic modeling Hybrid model Reaction kinetics Semi-supervised learning

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Mechanical performance of 22SiMn2TiB steel welded with lowtransformation- temperature filler wire and stainless steel filler wire

引用

Journal of Iron and Steel Research International 2024年第4期31卷 967-981页

作者： Zi-dong Lin Kai-jie Song Zhen Sun Zi-qian Zhu Xue-feng Zhao Constantinos Goulas Wei Ya Xing-hua Yu School of Materials Science and Engineering Beijing Institute of TechnologyBeijing 100081China Beijing Institute of Technology Chongqing Innovation Center Chongqing 401120China department of Design production and management Faculty of Engineering Technology.University of TwenteEnschede 7500 AETheNetherlands Rotterdam Additive Manufacture Fieldlab(RAMLAB) Rotterdam 3089 JWTheNetherlands

TX-80 low-transformation-temperature(LTT)welding wire was used to replace the traditional ER 307Si welding wire to realize the connection of 22SiMn2TiB armor steel in manual overlay *** previously existing issues,such as welding cracks,large welding deformation,and severe welding residual stress,were solved to ensure good strength and ductility *** particular,with the same welding conditions,TX-80 LTT wire eliminates welding *** reduces the welding deformation no matter the base pretreatment of pre-setting angle or no pre-setting *** comparison,it was found that the microstructure at the TX-80 weld is mainly composed of martensite and a small amount of retained *** contrast,the microstructure of the ER 307Si weld consists of a large amount of austenite and a small amount of skeleton-like *** variation trend of residual stress and microhardness from the weld to the base were investigated and compared with the mechanical properties of base *** TX-80 and the ER 307Si tensile samples elongation is 6.76%and 6.01%,while the ultimate tensile strengths are 877 and 667 MPa,*** average impact toughness at room temperature of the ER 307Si weld is 143.9 J/cm^(2),much higher than that of the TX-80 weld,which is only 36.7 J/cm^(2).The relationship between impact and tensile properties with microstructure species and distribution was *** addition,the fracture surface of the tensile and the impact samples was observed and *** dimples,fewer pores,larger radiation zone,and shear lips of TX-80 samples indicate better tensile ductility and worse impact toughness than those of ER 307Si weld.

关键词： Low-transformation-temperature material 22SiMn2TiB steel Welding deformation Residual stress Martensitic transformation Mechanical property

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Tracing suspended and bed sediments during high and low water periods using geochemical characteristics-Case study:Vazrood watershed,northern Iran

引用

Journal of Mountain Science 2024年第2期21卷 470-483页

作者： KARIMI Nabiyeh GHOLAMI Leila KAVIAN Ataollah KHALEDI DARVISHAN Abdulvahed department of Watershed management Faculty of Natural ResourcesSari Agricultural Sciences and Natural Resources UniversitySari ***Iran department of Watershed management Engineering Faculty of Natural ResourcesTarbiat Modares UniversityNoor ***Iran

Complete and comprehensive information about sediment dynamic and identification of hotspots of sediment production and transport are necessary for understanding the erosion processes and increasing the efficiency of soil and water conservation *** studies used the sediment fingerprint techniques to investigate the contribution of different sources in suspended and bed sediment yield of the ***,the contribution of various land use/land covers in suspended and bed sediment yield for the great Caspian Sea basin is in an aura of ambiguity and the present study was conducted to gather information about an important part of this area in northern Iran,where rangelands are located upstream of Hyrcanian forests and dense agricultural lands are located *** surface soil of different land use/land covers including forest,rangeland,agriculture and streambank lands were sampled in 30 *** and bed sediments were sampled in the watershed outlet in two high and low water *** characteristics of soil and sediment samples containing 59 elements were measured using ICP-OES GBC *** reliable and suitable tracers from 59 elements were then selected using Range test,Kruskal-Wallis and Discriminant Function Analysis,respectively,in FingerPro package of R *** results showed that for suspended sediment,streambank and rangeland had the highest contributions of 86.2%and 47.5%,respectively,in two high and low water *** bed sediment,in two high and low water periods,rangeland and streambank had the highest contributions of 73.8%and 84.4%,*** use change and especially human activities such as agriculture,road construction and development of residential areas along the main river riparian zone has led to a significant increase in suspended and bed sediments.

关键词： Caspian Sea basin FingerPro Geochemistry Sediment transport Tracer combination

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Role of copper chelating agents: between old applications and new perspectives in neuroscience

引用

Neural Regeneration Research 2025年第3期20卷 751-762页

作者： Rosalba Leuci Leonardo Brunetti Vincenzo Tufarelli Marco Cerini Marco Paparella Nikola Puvača Luca Piemontese department of Pharmacy-Pharmaceutical Science University of Bari Aldo MoroBariItaly department of Precision and Regenerative Medicine and Jonian Area(DiMePRe-J) Section of Veterinary Science and Animal ProductionUniversity of Bari Aldo MoroBariItaly department of Engineering management in Biotechnology Faculty of Economics and Engineering Management in Novi SadUniversity Business Academy in Novi SadNovi SadSerbia

The role of copper element has been an increasingly relevant topic in recent years in the fields of human and animal health, for both the study of new drugs and innovative food and feed supplements. This metal plays an important role in the central nervous system, where it is associated with glutamatergic signaling, and it is widely involved in inflammatory processes. Thus, diseases involving copper(Ⅱ) dyshomeostasis often have neurological symptoms, as exemplified by Alzheimer's and other diseases(such as Parkinson's and Wilson's diseases). Moreover, imbalanced copper ion concentrations have also been associated with diabetes and certain types of cancer, including glioma. In this paper, we propose a comprehensive overview of recent results that show the importance of these metal ions in several pathologies, mainly Alzheimer's disease, through the lens of the development and use of copper chelators as research compounds and potential therapeutics if included in multi-target hybrid drugs. Seeing how copper homeostasis is important for the well-being of animals as well as humans, we shortly describe the state of the art regarding the effects of copper and its chelators in agriculture, livestock rearing, and aquaculture, as ingredients for the formulation of feed supplements as well as to prevent the effects of pollution on animal productions.

关键词： agriculture Alzheimer's disease chelators copper feed supplements multi-target

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Review of construction and demolition waste management tools and frameworks with the classification,causes,and impacts of the waste

引用

Waste Disposal and Sustainable Energy 2024年第1期6卷 95-121页

作者： Dewan Sabbir Ahammed Rayhan Iftekhar Uddin Bhuiyan Institute of Appropriate Technology(IAT) Bangladesh University of Engineering and Technology(BUET)DhakaBangladesh department of Industrial and production Engineering(IPE) National Institute of Textile Engineering and Research(NITER)NayarhatSavarDhakaBangladesh

This review looks over the current construction and demolition waste management(C&DWM)situations by scrutinizing the definition,classification,components,compositions,generated sources and causes,impacts of generated construction and demolition wastes(C&DWs),waste management hierarchy(WMH),3R principles(Reduce,Reuse,and Recycle),Circular Economy(CE),frameworks,tools,and approaches of C&*** reviewing the literature this study contributes to the literature by the following means:(a)suitable working definitions of C&DW and C&DWM are provided,(b)an expanded WMH for construction and demolition operations is presented,(c)frameworks of C&DWM are identified and listed as follows:frameworks based on WMH,including 3R principles and CE concept,frameworks focusing on the quantification,estimation,and prediction of generated C&DW,frameworks focusing on effective and sustainable C&DWM,frameworks focusing economic,social,and environmental performance assessment,frameworks based on multi-criteria analysis(MCA),frameworks based on post-disaster recovery period,and other miscellaneous frameworks,and(d)four categories of tools utilized in C&DWM are identified and explained,namely,approaches employed in C&DWM,information technology(IT)tools employed in C&DWM,multi-criteria decision analysis(MCDA)tools employed in C&DWM,and C&DWM ***,this study also found that CE,and green rating system(GRS)are widely used approaches,Building Information Modeling(BIM),Radio Frequency Identification(RFID),Geographic Information System,and Big Data are the extensively used IT tools,Analytical Hierarchy Process,FUZZY,TOPSIS(Technique for Order Preference by Similarity to the Ideal Solution),Weighted Summation,Elimination and Choice Expressing the Reality II,Elimination and Choice Expressing the Reality III,Evaluation of Mixed Data,and REGIME(REG)are the widely used MCA tools in C&DWM,and Prefabricated Construction and Modular Construction are broadly used C&DWM ***

关键词： Construction and demolition waste Construction and demolition waste management Frameworks and tools 3R principles(Reduce,Reuse,&Recycle) Waste management hierarchy

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

欢迎您,

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

请选择保存的检索档案：

请选择收藏分类：

通借通还

欢迎您,

建议与咨询 留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

请选择保存的检索档案： 新增检索档案 确定 取消

请选择收藏分类： 新增自定义分类 确定 取消

通借通还

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

请选择保存的检索档案：

请选择收藏分类：