检索结果-南通市图书馆

Effect of Bi/Si Ratio of BiBSi Glass on Its Structure, Properties and Laser Sealing Shear Strength for Vacuum Glazing

引用

Journal of Wuhan University of technology(Materials science) 2025年第1期40卷 13-24页

作者： LIU Wei JIAO Jinxu LUO Dusha ZHOU Junjie SHI Lifen WANG Weiwei LI Changqing WANG Peng XIONG Dehua LI Hong State Key Laboratory of Silicate Materials for Architectures Wuhan University of TechnologyWuhan 430070China Silica-Based Materials Laboratory of Anhui Province CNBM Research Institute for Advanced Glass Materials Group Co.LtdBengbu 233018China State Key Laboratory of Advanced technology for Float Glass CNBM Research Institute for Advanced Glass Materials Group Co.LtdBengbu 233018China

The low-melting glass of Bi2O_(3)-B2O_(3)-SiO_(2)(BiBSi)system was used for the first time for laser sealing of vacuum *** the condition of constant boron content,how the structure and properties vary with Bi/Si ratio in low-melting glass was *** addition,the relationships between laser power,low-melting glass solder with different Bi/Si ratios and laser sealing shear strength were *** results show that a decrease in the Bi/Si ratio can cause a contraction of the glass network of the low-melting glass,leading to an increase of its characteristic temperature and a decrease of its coefficient of thermal *** laser sealing,the copper ions in the low-melting glass play an endothermic role.A change in the Bi/Si ratio will affect the valence state transition of the copper ions in the low-melting *** absorbance of the low-melting glass does not follow the expected correlation with the Bi/Si ratio,but shows a linear correlation with the content of divalent copper *** greater the concentration of divalent copper ions,the greater the absorbance of the low-melting glass,and the lower the laser power required for laser *** shear strength of the low melting glass solder after laser sealing was tested,and it was found that the maximum shear strength of Z1 glass sample was the highest up to 2.67 MPa.

关键词： Bi2O_(3)-B2O_(3)-SiO_(2)(BiBSi) Bi/Si ratio low-melting glass laser sealing vacuum glazing

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Experimental Observing Damage Evolution in Cement Pastes Exposed to External Sulfate Attack by in situ X-ray computed Tomography

引用

Journal of Wuhan University of technology(Materials science) 2025年第1期40卷 164-170页

作者： WU Min CAO Kailei XIAO Weirong YU Zetai CAO Jierong DING Qingjun LI Jinhui China Railway construction corporation Harbour and Channel Engineering Bureau group co. LTDZhuhai 519000China con-struction Headquarters of Zhoushan Liuheng Bridge Phase II Project Zhoushan 316000China China Railway construction Bridge En-gineering Bureau group co. LTDTianjin 300000China State Key Laboratory of Silicate Material for Architecture(Wuhan University of technology) Wuhan 430070China college of Materials science and Engineering Wuhan Textile UniversityWuhan 430200China

The paper presents experimental investigation results of crack pattern change in cement pastes caused by external sulfate attack(ESA).To visualize the formation and development of cracks in cement pastes under ESA,an X-ray computed tomography(X-ray CT)was used,i e,the tomography system of Zeiss Xradia 510 *** results indicate that X-CT can monitor the development process and distribution characteristics of the internal cracks of cement pastes under ESA with attack *** addition,the C3A content in the cement significantly affects the damage mode of cement paste specimens during sulfate *** damage of ordinary Portland cement(OPC)pastes subjected to sulfate attack with high C3A content are severe,while the damage of sulfate resistant Portland cement(SRPC)pastes is much smaller than that of OPC ***,a quadratic function describes the correlation between the crack volume fraction and development depth for two cement pastes immermed in sulfate solution.

关键词： concrete external sulfate attack damage evolution situ X-ray computed tomography

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

High temperature self-lubricating Ti-Mo-Ag composites with exceptional high mechanical strength and wear resistance

引用

Journal of Materials science & technology 2024年第13期180卷 80-90页

作者： Yu Zhen Minghui Chen Chengtao Yu Zongbang Yang Yang Qi Fuhui Wang Shenyang National Laboratory for Materials science Northeastern UniversityShenyang 110819China School of Mechanical Engineering Ningxia Institute of Science and TechnologyShizuishan 753000China lingyun science&technology group co.ltd Wuhan 430040China

Titanium alloys are of keen interest as lightweight structural materials for aerospace and automotive ***,a longstanding problem for these materials is their poor tribological ***,we designed and fabricated a multiphase Ti-Mo-Ag composite(TMA)with heterogeneous triple-phase precipitation(TPP)structure by spark plasma sintering.A lamellarα-phase(αL)precipitates from theβ-phase under furnace cooling conditions and maintains a Burgers orientation relationship(BOR)withβ-*** active eutectic transition also occurs in the titanium matrix,resulting in TiAg *** intersecting acicular TiAg and lamellarαL cutβgrains into fine blocks and the primary equiaxedαphase also provides many interfaces withβphase,which together effectively impede dislocation move-ment and increase *** with other titanium composites,TMA with TPP microstructure gets an excellent combination of strength(yield strength 1205 MPa)and toughness(fracture strain 27%).Furthermore,the TPP structure endows TMA with strong cracking resistance,which aids in reducing abra-sive debris at high temperatures during sliding and obtaining a low wear ***,Ag parti-cles distributed at grain boundaries will easily diffuse to the wear surface,in situ forming the necessary lubricating phase Ag_(2)MoO_(4) with Mo-rich matrix debris via *** possesses excellent tribologi-cal properties with especially low wear rate of 8.0 x 10^(-6)mm^(3)N^(-1)m^(-1) and friction coefficient(coF)of merely 0.20 at 600℃.Unlike other self-lubricating composites with high volume fraction of soft ceramic lubricants,which inevitably sacrifice their mechanical strength and ductility,the composite TMA pos-sesses well-balanced strength,toughness and self-lubricating *** holds important implications to design other metal matrix self-lubricating composites(MMSCs)used for load-bearing moving parts.

关键词： Titanium High-temperature oxidation Self-lubricating Mechanical properties

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

SensFL:Privacy-Preserving Vertical Federated Learning with Sensitive Regularization

引用

computer Modeling in Engineering & sciences 2025年第1期142卷 385-404页

作者： Chongzhen Zhang Zhichen Liu Xiangrui Xu Fuqiang Hu Jiao Dai Baigen Cai Wei Wang School of Automation and Intelligence Beijing Jiaotong UniversityBeijing100044China Shuohuang Railway Development co. Ltd.National Energy GroupCangzhou062350China Beijing Key Laboratory of Security and Privacy in Intelligent Transportation School of Computer Science and TechnologyBeijing Jiaotong UniversityBeijing100044China

In the realm of Intelligent Railway Transportation Systems,effective multi-party collaboration is crucial due to concerns over privacy and data *** Federated Learning(VFL)has emerged as a promising approach to facilitate such collaboration,allowing diverse entities to collectively enhance machine learning models without the need to share sensitive training ***,existing works have highlighted VFL’s susceptibility to privacy inference attacks,where an honest but curious server could potentially reconstruct a client’s raw data from embeddings uploaded by the *** vulnerability poses a significant threat to VFL-based intelligent railway transportation *** this paper,we introduce SensFL,a novel privacy-enhancing method to against privacy inference attacks in ***,SensFL integrates regularization of the sensitivity of embeddings to the original data into the model training process,effectively limiting the information contained in shared *** reducing the sensitivity of embeddings to the original data,SensFL can effectively resist reverse privacy attacks and prevent the reconstruction of the original data from the *** experiments were conducted on four distinct datasets and three different models to demonstrate the efficacy of *** results show that SensFL can effectively mitigate privacy inference attacks while maintaining the accuracy of the primary learning *** results underscore SensFL’s potential to advance privacy protection technologies within VFL-based intelligent railway systems,addressing critical security concerns in collaborative learning environments.

关键词： Vertical federated learning privacy defenses

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

The Mechanism of Heating Rate on the Secondary Recrystallization Evolution in Grain Oriented Silicon Steel

引用

Journal of Wuhan University of technology(Materials science) 2025年第1期40卷 275-282页

作者： GAO Qian LI Jun WANG Xianhui CAO Laifu GONG Jian LI Bo Central Iron and Steel Research Institute group Beijing 100081China Shougang Zhixin Electromagnetic Material R&D(Beijing)co. Ltd.Beijing 101300China Beijing Shougang co. Ltd.Qian’an 064404China

Grain-oriented silicon steels were prepared at different heating rates during high temperature annealing,in which the evolution of magnetic properties,grain orientations and precipitates were *** illustrate the Zener factor,the diameter and number density of precipitates of interrupted testing samples were statistically *** effect of precipitate ripening on the Goss texture and magnetic property was *** indicated that the trend of Zener factor was similar under different heating rates,first increasing and then decreasing,and that the precipitate maturing was greatly inhibited as the heating rate *** recrystallization was developed at the temperature of 1010℃when a heating rate of 5℃/h was used,resulting in Goss,Brass and{110}oriented grains growing abnormally and a magnetic induction intensity of ***,increasing the heating rate to 20℃/h would inhibit the development of undesirable oriented grains and obtain a sharp Goss ***,when the heating rate was extremely fast,such as 40℃/h,poor secondary recrystallization was developed with many island grains,corresponding to a decrease in magnetic induction intensity to 1.87 *** a suitable heating rate of 20℃/h,the sharpest Goss texture and the highest magnetic induction of 1.94 T with an onset secondary recrystallization temperature of 1020℃were found among the experimental variables in this *** heating rate affected the initial temperature of secondary recrystallization by controlling the maturation of precipitates,leading to the deviation and dispersion of Goss texture,thereby reducing the magnetic properties.

关键词： high temperature annealing heating rate secondary recrystallization grain oriented silicon steel

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Improvement of cold Recycled Mixture Performance Based on Improved Density Test Method and RAP Characteristics

引用

Journal of Wuhan University of technology(Materials science) 2025年第1期40卷 79-87页

作者： HAN Zhanchuang PANG Yafeng LIN Hongwei China First Highway Engineering group co. LtdBeijing 100024China The Key Laboratory of Road and Traffic Engineering Ministry of EducationTongji UniversityShanghai 201804China Guangzhou Baiyun International Airport co. Ltd.Guangzhou 510470China

The available test methods for optimal moisture content of cold recycled mixture(CRM)as well as its bulk specific gravity,and theoretical maximum relative density were analyzed in this *** test improvements were suggested to improve test control of the CRM road performance based on the discovered ***,the properties of reclaimed asphalt pavement(RAP),including the content of old asphalt,penetration index,passing rate of 4.75 mm sieve,and gradation change rate after extraction,were *** effects of RAP characteristics on splitting tensile strength,water stability,the high-and low-temperature performance of emulsified asphalt CRM were *** results show that the optimum moisture content of CRM should be determined when the compaction work matches the specimen’s molding *** the analyzed methods of bulk specific gravity assessment,the dry-surface and coreLok methods provide more robust and accurate results than the wax-sealing method,while the dry-surface method is the most *** modified theoretical maximum relative density test method is proposed,which can reduce the systematic error of the vacuum test *** following RAP-CRM trends can be *** lower the content of old asphalt and the smaller the change rate of gradation,the smaller the voids and the better the water stability of *** greater the penetration of old asphalt,the higher the fracture work and low-temperature splitting *** greater the penetration,the higher the passing rate of 4.75 mm sieve after extraction,and the worse the high-temperature performance of CRM.

关键词： RAP volume parameters high-temperature performance low-temperature performance water stability

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Satellite-assisted 6G wide-area edge intelligence:dynamics-aware task offloading and resource allocation for remote IoT services

引用

science China(Information sciences) 2025年

作者： Di ZHAO Rui DING Bin SONG State Key Laboratory of Integrated Services Networks Xidian University Hangzhou Institute of technology Xidian University China Satellite Network group co. Ltd.

Future 6G networks will integrate non-terrestrial communication with mobile edge computing to enable wide-area edge intelligence, providing ubiquitous communication and computation services for everyone and everything. In this paper, we introduce the intelligent cloud-edge-device architecture into low Earth orbit (LEO) satellite-supported remote Internet of Things(IoT) networks to facilitate latency-sensitive and compute-intensive IoT applications. However, the dynamic spatio-temporal characteristics inherent in LEO satellite networks, such as the high volatility of task traffic and the high mobility of space nodes, pose severe challenges. For efficient task execution, we investigate the joint optimization of cross-region task offloading and cross-domain resource allocation, and innovatively propose a spatio-temporal attention-based proximal policy optimization(STA-PPO) algorithm. Specifically, the temporal attention-based actor network analyzes the timing dependencies of task arrival and makes time-variant decisions. Simultaneously, the spatial attention-based critic network captures the spatial variations of satellite motion and evaluates the topology-related value. We verify the effectiveness of the cloud-edge-device collaboration through extensive simulations. Numerical results demonstrate that the STA-PPO algorithm outperforms benchmarks, showing the lowest system delay and the highest link throughput.

关键词：

来源：

同方期刊数据库评论

在线全文

同方期刊数据库

学校读者我要写书评

暂无评论

Localizing base stations with measured data:a concatenated image-based deep learning approach

引用

science China(Information sciences) 2025年

作者： Yang CHEN Ziyuan LIU Feng JIANG Hong SHEN Wei XU Mengyu LI Ritao CHENG National Mobile communications Research Laboratory Southeast University China Mobile group Design Institute co. Ltd.

Localization has become an indispensable function of modern cellular communication systems[1]. In a cloud radio access network （C-RAN）, the remote radio head （RRH） is the actual signal transmitter, whose location ...

关键词：

来源：

同方期刊数据库评论

在线全文

同方期刊数据库

学校读者我要写书评

暂无评论

Ammonia-induced CuO/13X for H_(2)S removal from simulated blast furnace gas at low temperature

引用

Green Energy & Environment 2025年第1期10卷 139-149页

作者： Erping Cao Yuhua Zheng Hao Zhang Jianshan Wang Yuran Li Tingyu Zhu Zhan-guo Zhang Guangwen Xu Yanbin Cui State Key Laboratory of Mesoscience and Engineering Institute of Process EngineeringChinese Academy of SciencesBeijing100190China State Key Laboratory of Vanadium and Titanium Resources comprehensive Utilization PanGang Group Research Institute Co.Ltd.Panzhihua Sichuan617000China Shenyang University of Chemical technology Shenyang110142China University of Chinese Academy of sciences Beijing 100049China

Blast furnace gas(BFG)is an important by-product energy for the iron and steel industry and has been widely used for heating or electricity ***,the undesirable contaminants in BFG(especially H_(2)S)generate harmful environmental *** desulfurization of BFG is urgent for integrated steel plants due to the stringent ultra-low emission *** with other desulfurization materials,zeolite-based adsorbents represent a viable option with low costs and long service *** this study,an ammonia-induced CuO modified 13X adsorbent(NH3–CuO/13X)was prepared for H_(2)S removal from simulated BFG at low *** XRD,H_(2)-TPR and TEM analysis proved that smaller CuO particles were formed and the dispersion of Cu on the surface of 13X zeolite was improved via the induction of *** on H_(2)S adsorption performance of the adsorbent was carried out using simulated BFG,and the results showed that NH3–CuO/13X-3 has better breakthrough sulfur capacity,which was more than twice the sulfur capacity of CuO/*** is proposed that the enhanced desulfurization performance of NH3–CuO/13X is attributed to an abundant pore of 13X,and combined action of 13X and *** work provided an effective way to improve the sulfur capacity of zeolite-based adsorbents via impregnation method by ammonia induction.

关键词： Blast furnace gas Desulfurization Ammonia-induced CuO 13X zeolite

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Automatic and Rapid Throughflow-Based Optimal Design Method for Multi-Stage Axial-Flow compressors

引用

Journal of Thermal science 2025年第1期34卷 77-91页

作者： LEI Fan ZHANG Xiawen JU Yaping ZHANG Chuhua Department of Fluid Machinery and Engineering School of Energy and Power EngineeringXi'an Jiaotong University Production and Environmental Department China Huaneng Group.Co.Ltd. State Key Laboratory for Strength and Vibration of Mechanical Structures Xi'an Jiaotong University

Throughflow design has the advantages of less time consumption and large optimization space,and thus is the corner stone of advanced design system of multi-stage axial-flow *** majority of relevant studies were limited to the throughflow inverse designs,and quite few works have been till now devoted to the throughflow optimal *** this work,an automatic and rapid throughflow-based optimal design method is proposed for axial-flow compressors in which a throughflow inverse design solver is embedded in optimal genetic algorithm to improve the design efficiency of axial-flow *** types of design parameters in the throughflow inverse design of axial-flow compressors,i.e.,swirl and shroud curve,are simultaneously used to optimize both the blade shape and flow *** proposed method is validated by the redesign optimization of the benchmark axial-flow compressor NASA Stage 35,and the CFD predictions show that the throughflow-based optimization leads to 1.18% efficiency benefit at design *** proposed method is then utilized to the two-dimensional throughflow optimal design of a large-scale 6.5-stage axial-flow industrial *** optimal design results are confirmed by CFD predictions,indicating that the proposed method can effectively improve the design adiabatic efficiency of the compressors by 1.09% within a few minutes on desk-top *** throughflow design implications are also obtained for advanced axial-flow industrial *** work could enhance the capability of throughflow design method and has engineering application value to explore the throughflow optimization space of multi-stage axial-flow compressors.

关键词： NASA

来源：

同方期刊数据库评论

在线全文

同方期刊数据库

学校读者我要写书评

暂无评论

欢迎您,

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

请选择保存的检索档案：

请选择收藏分类：

通借通还

欢迎您,

建议与咨询 留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

请选择保存的检索档案： 新增检索档案 确定 取消

请选择收藏分类： 新增自定义分类 确定 取消

通借通还

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

请选择保存的检索档案：

请选择收藏分类：