检索结果-南通市图书馆

Friction 2024年第3期12卷 452-461页

作者： Xiaoyue WANG Zenghui YANG Tingmei WANG Qihua WANG Xinrui ZHANG Song LI Key Laboratory of Science and Technology on Wear and Protection of Materials Lanzhou Institute of Chemical PhysicsChinese Academy of SciencesLanzhou 730000China Center of Materials Science and Optoelectronics Engineering University of Chinese Academy of SciencesBeijing 100049China State Key Laboratory of Solid Lubrication Lanzhou Institute of Chemical PhysicsChinese Academy of SciencesLanzhou 730000China

Recyclability of thermosetting polymers and their composites is a challenge for alleviating environmental pollution and resource waste.In this study,solvent-recyclable thermosetting polyimide(PI)and its composite were successfully synthesized.The tensile strength,elongation at break,and Young’s modulus of PI are 108.70±7.29 MPa,19.35%±3.89%,and 2336.42±128.00 MPa,respectively.The addition of reduced graphene oxide(RGO)not only enhances the mechanical properties of PI but also endows it with excellent tribological properties.The PI illustrates a high recycling efficiency of 94.15%,but the recycled composite exhibits inferior mechanical properties.The recycling and utilization of PI and its composite are realized through imine bonds(-C=N),which provides new guidance for solving the problem of environmental pollution and resource waste and is potential application in the field of sustainable tribology.

关键词： thermosetting polyimide(PI) recyclability dynamic covalent bonds friction and wear polymer composites

Thermodynamic nature of black holes in coexistence region

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Science China(physics,Mechanics & Astronomy) 2024年第5期67卷 27-32页

作者： Shao-Wen Wei Yu-Xiao Liu lanzhou Center for Theoretical physics Key Laboratory of Theoretical Physics of Gansu Provinceand Key Laboratory of Quantum Theory and Applications of Mo ELanzhou UniversityLanzhou 730000China institute of Theoretical physics&Research Center of Gravitation Lanzhou UniversityLanzhou 730000China

Studying the system state of coexistence regions will peek into to reveal microscopic interactions between different phases of a thermodynamic system.However,there is no effective method to study thermodynamic nature of the coexistence black hole regions for the failure of the equation of state.Aiming at these coexistence states,in this work,we develop a general approach by introducing two new ratio parameters.The first one is the ratio of the horizon radii of the saturated coexistence small and large black holes,and the second one measures that of the small black hole molecule number to the total molecule number.We demonstrate that the first parameter can serve as an order parameter to characterize the first-order phase transition.The study also shows that the black hole state in the coexistence region is uniquely determined by these two introduced parameters bounded between 0 and 1.These results are quite significant in the analytical study of phase transition and the microscopic nature of black hole in the coexistence regions.

关键词： transition. state. thermodynamic

Catalytic behavior of Mo-Bi-Fe-Co-K-M-O(M=Ce,Gd,CeGd)catalysts for selective oxidation of isobutene

在线全文

学校读者我要写书评

暂无评论

Journal of Rare Earths 2024年第1期42卷 84-93,I0003页

作者： Qinghui Li Huahua Zhao Jian Yang Jun Zhao Liang Yan Huanling Song Lingjun Chou State Key Laboratory for Oxo Synthesis and Selective Oxidation Lanzhou Institute of Chemical PhysicsChinese Academy of SciencesLanzhou730000China University of Chinese Academy of Sciences Beijing100049China

The further improvement of methacrolein(MAL)selectivity from isobutene(IB)oxidation is crucial and challenging.In this study,based on the typical Mo-Bi-Fe-Co-K-O mixed metal oxide,the rare earth element Gd-doped,Ce-doped and CeGd co-doped catalysts were prepared by co-precipitation strategy to increase the selectivity of MAL from 47.9%to 49.8%,64.2% and 68.6%,respectively.In order to elucidate in-depth the promoting effect of Ce and/or Gd,various characterizations were utilized including X-ray diffraction patterns(XRD),Raman,X-ray fluorescence spectrometry(XRF),X-ray photoelectron spectroscopy(XPS),O_(2)-temperature programmed desorption(O_(2)-TPD),H2-temperature programmed reduction(H2-TPR),CO_(2)-temperature programmed desorption(CO_(2)-TPD),IB-temperature programmed desorption(i-C4-TPD)and in-situ IB-Fourier transform infrared spectroscopy(IB-FTIR).Both Ce and Gd finely regulate the bulk and surface structure of the catalyst,thus altering the redox ability,oxygen mobility and storage ability and basicity.Compared with Ce,Gd addition slightly regulates the variation of Co^(2+)/Co^(3+)redox couples,greatly enhances the interaction among the components on the catalyst,thus only increases the content of surface oxygen species and has little effect on their mobility.While Cecontaining catalyst performs stronger oxygen storage and migration ability,thus leading to the overproduction of surface Odefectspecies,which are proposed to be the active sites for the production of MAL and COx.The CeGd co-doped catalyst possesses the proper content of surface Odefectspecies,thus exhibits much higher MAL selectivity.Moreover,the promoting mechanism of Ce and/or Gd over IB oxidation is proposed.Therefore,this work is helpful for understanding the influence of rare earth elements on the structure of mixed metal oxides and the olefin selective oxidation reaction.

关键词： Mixed metal oxide catalyst Rare earth element Isobutene Selective oxidation Methacrolein

Highly strengthening and toughening biomimetic ceramic structures fabricated via a novel coaxially printing

在线全文

学校读者我要写书评

暂无评论

Journal of Advanced Ceramics 2024年第4期13卷 403-412页

作者： Kunkun Song Shengda Yang Ningqi Shao Yantang Zhao Peng He Yongfeng Wei Hengzhong Fan Yongsheng Zhang Qiangqiang Zhang State Key Laboratory of Solid Lubrication Lanzhou Institute of Chemical PhysicsChinese Academy of SciencesLanzhou 730000China School of Civil Engineering and Mechanics Lanzhou UniversityLanzhou 730000China Key Laboratory of Mechanics on Disaster and Environment in Western China(lanzhou University) Ministry of EducationLanzhou 730000.China

Additive manufacturing technology,by manipulating and emulating inherent multiscale,multi-material,and multifunctional structures found in nature,has created new opportunities for constructing heterogeneous structures associated with special properties and achieving ultra-high mechanical performance and reliability in ceramic composite materials.In this study,we have developed an innovative fabrication method designated as coaxial 3D printing for the synchronous construction of two constituents into ceramic composites with a tooth enamel biomimetic microstructure.Herein,the stiff silicate and flexible epoxy served as a strengthening bridge and toughening layer,respectively.The method differed from the traditional approach of randomly dispersing reinforcing components within a ceramic matrix.It allowed for the direct creation of an internally effective three-dimensional reinforcement network structure in ceramic composites.This process facilitated synergistic deformation and simultaneous enhancement of multiple materials and hierarchical structures.Owing to the uniform distribution of internal stress and effective block of microcrack propagation,the biomimetically structured silicate/epoxy ceramic composite has demonstrated much significant enhancement in mechanical properties,includingcompressive strength(48.8±3.12MPa),flexuralstrength(10.39±1.23MPa),andflexuraltoughness(218.7±54.6kJ/m^(3)),which was 0.5,2.1,and 47.5 times as high as those of the intrinsic brittle silicate ceramics,respectively.In-situ characterization and multiscale finite element simulation of microstructural evolution during three-point bending deformation further validated multiple-step features of the fracture process(silicate bridge fracture,interface detachment,epoxy extraction,and rupture),which benefited from interpenetrating structural features achieved by coaxial printing to accomplish with the complex propagating routines of the crack deflection in silicate ceramic composites.This coaxial 3D printing method paves the way for tailored

关键词： coaxial 3D printing silicate ceramic composites enamel biomimetic microstructure strengthening bridge tougheninglayer crackdeflection

Modification of POSS and their tribological properties and resistant to space atomic oxygen irradiation as lubricant additive of multialkylated cyclopentanes

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Friction 2024年第5期12卷 884-896页

作者： Xingwei WANG Chaoyang ZHANG Chen ZHAO Yijing LIANG Ming ZHANG Wufang YANG Bo YU Qiangliang YU Meirong CAI Feng ZHOU Weimin LIU State Key Laboratory of Solid Lubrication Lanzhou Institute of Chemical PhysicsChinese Academy of SciencesLanzhou730000China Shandong Laboratory of Yantai Advanced Materials and Green Manufacturing Yantai264000China

Developing functional additive resistant to space atomic oxygen(AO)irradiation through simple molecular design and chemical synthesis to enhance the lubricating performance of multialkylated cyclopentanes(MACs)oil is a significant challenge.Herein,sulfur-containing polyhedral oligomere silsesquioxane(POSS)were synthesize via a click-chemistry reaction of octavinyl polyhedral oligomeric with alkyl sulfide.The reduce-friction(RF),anti-wear(AW)properties and anti-AO irradiation of POSS-S-R as MACs base oil additives in atmospheric and simulated space environments were systematically investigated for the first time.Results demonstrate that POSS-S-R not only possesses outstanding anti-AO irradiation capacity but also effectively improves the RF and AW of MACs in atmospheric or simulated space surroundings.This improvement is due to the excellent anti-AO irradiation properties of the POSS structure itself and the high load-carrying ability of silicon-containing and sulfur-containing compounds generated by tribo-chemical reactions,which effectively separates the direct contact of the friction interface.We believe that this synthesized POSS-S-R is a promising additive for space lubricants.

关键词： POSS additive reduce-friction anti-wear multialkylated cyclopentanes(MACs) resistant atomic irradiation

A Dielectric Ink Combining Acrylate and Cyanate Moieties for Inkjet 3D Printing with Good Thermal Stability

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Chinese Journal of Polymer Science 2024年第6期42卷 766-774页

作者： Yi-Xuan Li Liang-Ying Wu Yan Yang Yao-Zhong Lu Zhong-Ying Ji Yu-Xiong Guo Xiao-Long Wang Qiao-Sheng Pu State Key Laboratory of Applied Organic Chemistry College of Chemistry and Chemical EngineeringLanzhou UniversityLanzhou730000China State Key Laboratory of Solid Lubrication Lanzhou Institute of Chemical PhysicsLanzhou730000China lanzhou Traditional Chinese Medicine Hospital of Orthopedics and Traumatology Lanzhou730000China Shandong Laboratory of Advanced Materials and Green Manufacturing at Yantai Yantai Zhongke Research Institute of Advanced Materials and Green Chemical EngineeringYantai264006China

Inkjet 3D printing has potential in the additive manufacturing of electronic circuits and devices.However,inks that can be used for printing layers with T5%>300℃ or hardness>200 MPa have been rarely reported.Cyanate ester(CE)polymers have excellent thermal stability,high strength,and low shrinkage compared to other common dielectric inks for inkjet 3D printing,but cannot be quickly shaped by ultraviolet(UV)irradiation or thermal treatment.Combining CEs with UV-curable monomers may be a possible way to accelerate crosslinking,but there are challenges from the adverse effects of the dilution of both monomers.In this study,dielectric inks with acrylate and cyanate moieties were developed.The low viscosity and surface tension of the CE precursor(Bisphenol E cyanate ester)were combined with photocurable acrylate diluent monomers and cross-linker to realize an ink suitable for inkjet 3D printing.An internal dual three-dimensional cross-linked network structure resin was prepared by a combination of photocuring and thermal curing with T5%up to 326.69℃,hardness up to 431.84 MPa,dielectric constant of 2.70 at 8 GHz,and shrinkage of 1.64%.The developed dielectric inks can be applied to the 3D printing of printed circuit boards and other electronic devices that require dielectric properties.

关键词： Inkjet printing Cyanate ester resin 3D doubly cross-linked network Good thermal stability

Modeling and prediction of tribological properties of copper/aluminum-graphite self-lubricating composites using machine learning algorithms

在线全文

学校读者我要写书评

暂无评论

Friction 2024年第6期12卷 1322-1340页

作者： Huifeng NING Faqiang CHEN Yunfeng SU Hongbin LI Hengzhong FAN Junjie SONG Yongsheng ZHANG Litian HU School of Electrical and Mechanical Engineering Lanzhou University of TechnologyLanzhou 730050China State Key Laboratory of Solid Lubrication Lanzhou Institute of Chemical PhysicsChinese Academy of SciencesLanzhou 730000China Center of Materials Science and Optoelectronics Engineering University of Chinese Academy of SciencesBeijing 100049China

The tribological properties of self-lubricating composites are influenced by many variables and complex mechanisms.Data-driven methods,including machine learning(ML)algorithms,can yield a better comprehensive understanding of complex problems under the influence of multiple parameters,typically for how tribological performances and material properties correlate.Correlation of friction coefficients and wear rates of copper/aluminum-graphite(Cu/Al-graphite)self-lubricating composites with their inherent material properties(composition,lubricant content,particle size,processing process,and interfacial bonding strength)and the variables related to the testing method(normal load,sliding speed,and sliding distance)were analyzed using traditional approaches,followed by modeling and prediction of tribological properties through five different ML algorithms,namely support vector machine(SVM),K-Nearest neighbor(KNN),random forest(RF),eXtreme gradient boosting(XGBoost),and least-squares boosting(LSBoost),based on the tribology experimental data.Results demonstrated that ML models could satisfactorily predict friction coefficient and wear rate from the material properties and testing method variables data.Herein,the LSBoost model based on the integrated learning algorithm presented the best prediction performance for friction coefficients and wear rates,with R2 of 0.9219 and 0.9243,respectively.Feature importance analysis also revealed that the content of graphite and the hardness of the matrix have the greatest influence on the friction coefficients,and the normal load,the content of graphite,and the hardness of the matrix influence the wear rates the most.

关键词： self-lubricating composites machine learning(ML) tribological properties prediction

Macro-superlubricity in sputtered MoS_(2)-based films by decreasing edge pinning effect

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Friction 2024年第1期12卷 52-63页

作者： Chunmeng DONG Dong JIANG Yanlong FU Desheng WANG Qinqin WANG Lijun WENG Ming HU Xiaoming GAO Jiayi SUN State Key Laboratory of Solid Lubrication Lanzhou Institute of Chemical PhysicsChinese Academy of SciencesLanzhou 730000China Center of Materials Science and Optoelectronics Engineering University of Chinese Academy of SciencesBeijing 100049China

To date,MoS_(2) can only be achieved at microscale.Edge pinning effect caused by structure defects is the most obvious barrier to expand the size of structural superlubricity to macroscale.Herein,we plan to pin edge planes of MoS_(2) with nanospheres,and then the incommensurate structure can be formed between adjacent rolling nanoparticles to reduce friction.The sputtered MoS_(2) film was prepared by the physical vapor deposition(PVD)in advance.Then enough Cu_(2)O nanospheres(~40 nm)were generated in situ at the edge plane of MoS_(2) layers by liquid phase synthesis.An incommensurate structure(mismatch angle(θ)=8°)caused by MoS_(2) layers was formed before friction.The friction coefficient of the films(5 N,1,000 r/min)was~6.0×10^(−3) at the most.During friction,MoS_(2) layers pinned on numerous of Cu_(2)O nanoparticles reduced its edge pinning effect and decreased friction.Moreover,much more incommensurate was formed,developing macro-superlubricity.

关键词： sputtered MoS_(2)film Cu_(2)O nanospheres edge pinning effect macro-superlubricity

Slippery hydrogel with desiccation-tolerant‘skin’for high-precision additive manufacturing

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

International Journal of Extreme Manufacturing 2024年第2期6卷 486-500页

作者： Desheng Liu Pan Jiang Yue Hu Yaozhong Lu Yixian Wang Jiayu Wu Danli Hu Tao Wu Xiaolong Wang State Key Laboratory of Solid Lubrication Lanzhou Institute of Chemical PhysicsChinese Academy of SciencesLanzhou 730000People’s Republic of China CAS Key Laboratory of Chemistry of Northwestern Plant Resources Lanzhou Institute of Chemical PhysicsChinese Academy of SciencesLanzhou 730000People’s Republic of China Shandong Laboratory of Advanced Materials and Green Manufacturing at Yantai Yantai Zhongke Research Institute of Advanced Materials and Green Chemical EngineeringYantai 264006People’s Republic of China Key Laboratory of Materials-Oriented chemical Engineering of Xinjiang Uygur Autonomous Region School of Chemistry and Chemical EngineeringShihezi UniversityShihezi 832003People’s Republic of China

Hydrogels inevitably undergo dehydration,structural collapse,and shrinkage deformation due to the uninterrupted evaporation in the atmosphere,thereby losing their flexibility,slipperiness,and manufacturing precision.Here,we propose a novel bioinspired strategy to construct a spontaneously formed‘skin’on the slippery hydrogels by incorporating biological stress metabolites trehalose into the hydrogel network,which can generate robust hydrogen bonding interactions to restrain water evaporation.The contents of trehalose in hydrogel matrix can also regulate the desiccation-tolerance,mechanical properties,and lubricating performance of slippery hydrogels in a wide range.Combining vat photopolymerization three-dimensional printing and trehalose-modified slippery hydrogels enables to achieve the structural hydrogels with high resolution,shape fidelity,and sophisticated architectures,instead of structural collapse and shrinkage deformation caused by dehydration.And thus,this proposed functional hydrogel adapts to manufacture large-scale hydrogels with sophisticated architectures in a long-term process.As a proof-of-concept demonstration,a high-precision and sophisticated slippery hydrogel vascular phantom was easily fabricated to imitate guidewire intervention.Additionally,the proposed protocol is universally applicable to diverse types of hydrogel systems.This strategy opens up a versatile methodology to fabricate dry-resistant slippery hydrogel for functional structures and devices,expanding their high-precision processing and broad applications in the atmosphere.

关键词： slippery hydrogel trehalose desiccation tolerance vat photopolymerization 3D printing hydrogen bonding

Critical Opalescence and Its Impact on the Jet Quenching Parameter q

在线全文

学校读者我要写书评

暂无评论

Chinese physics Letters 2024年第3期41卷 23-29页

作者：武警曹杉杉李峰 School of Physical Science and Technology Lanzhou UniversityLanzhou 730000China institute of Frontier and Interdisciplinary Science Shandong UniversityQingdao 266237China Research Center for Hadron and CSR physics Lanzhou University and Institute of Modern Physics of CASLanzhou 730000China lanzhou Center for Theoretical physics Key Laboratory of Theoretical Physics of Gansu Provinceand Frontiers Science Center for Rare IsotopesLanzhou UniversityLanzhou 730000China Frontiers Science Center for Rare Isotopes Lanzhou UniversityLanzhou 730000China

Jet quenching parameter q is essential for characterizing the interaction strength between jet partons and nuclear matter.Based on the quark-meson model,we develop a new framework for calculating q at finite chemical ... 详细信息

关键词： parameter quark calculating