检索结果-南通市图书馆

Super-high bed sintering for iron ores:variation and optimization of bed resistance

Journal of iron and steel Research International 2025年第1期32卷 40-51页

作者： Liang-ping Xu Lin Xiong Hui-bo Liu Xi-duan Yang Ai-xiang Mao Pei-dun Chen Guang-hui Li School of Minerals Processing and Bioengineering Central South UniversityChangsha410083HunanChina Central Research Institute Baosteel Group Co.Ltd.Shanghai201900China Manufacturing Management Department Guangdong Zhongnan Iron and Steel Co.Ltd.Shaoguan512123GuangdongChina Technology and Development Center Shandong Taishan Iron and Steel Group Co.Ltd.Jinan271100ShandongChina

As the bed depth increases,sintering yield increases,but the productivity *** reveal the reasons for the decrease in productivity and explore targeted solutions,the bed resistance of mixtures,wet zone,and combustion zone was analyzed in the *** results showed that the decreased porosity of mixture resulted in the increased bed resistance by 160.56%when the bed depth increased from 600 to 1000 *** improving porosity of 1%by adding loosening bars with optimized size and distribution,the bed resistance decreased,and the productivity increased by 5%.The increase in bed depth increased the thickness of the wet zone from 120 to 680 mm and the resistance from 1.56 to 8.83 *** using a three-stage intensive mixer and pre-adding water for granulation,the moisture of mixture was reduced by 0.6%,and the sintering productivity increased by 4%.Besides,the high bed resistance is mainly caused by the increase in the thickness of the combustion zone from 31.9 to 132.7 mm,and the bed resistance increased from 0.70 to 5.62 *** bed resistance of the combustion zone at 900 mm was increased by 90.51%compared to 700 *** optimization of the distribution of coke breeze,the thickness of combustion zone at the lower layer decreased from 132.7 to 106.84 mm and permeability improved significantly.

关键词： Super-high bed sintering Bed resistance Permeability Productivity Wet zone Combustion zone

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Controlling segregation and hardenability of gear steel based on as-cast structure

引用

Journal of iron and steel Research International 2025年第1期32卷 144-158页

作者： Hai-jie Wang Ze Zhang Peng Lan Gang Chen Pu Wang Chuan-hui Jiang Jia-quan Zhang School of Metallurgical and Ecological Engineering University of Science and Technology BeijingBeijing 100083China Weifang iron and steel group Co. Ltd.Weifang 261000ShandongChina

Hardenability significantly impacts the distortion of gear during heat treatment,correlated to the uniformity of solute distribution in steel *** experimental analysis was conducted on the macrostructure,solute distribution,dendrite structure,and rod hardenability of 20CrMnTiH gear steel in continuously cast blooms and hot roller *** evaluation approach by the standards for the hardenability of gear steel rods and the corresponding blooms was analyzed,and the inheritance mechanism from solidification segregation to hardenability fluctuation of gear steel was *** results indicate that semi-macroscopic spot segregation located in the equiaxed zone exhibits larger size,higher solute enrichment,and worse solute homogeneity,leading to significant solute fluctuations in the blooms and hardenability fluctuation in the *** increasing the liquid steel superheat from 35 to 40℃,reducing the mold electromagnetic stirring from 300 to 100 A,and implementing the soft reduction(SR)of 7 mm at the solidification end,the equiaxed ratio of the strand decreased from 26.42%to 6.69%.Consequently,the solute fluctuation range and standard deviation decrease significantly in the transverse section,while the maximum segregation ratio,average fluctuation range,and average standard deviation of solutes C,Cr,and Mn in the spot segregation decrease at the same *** the meanwhile,the equiaxed ratio of the rod decreased from 24.89%to 4.09%,and the structure of the hardenability detection zone was transformed from equiaxed crystals to columnar ***,the solute fluctuation range and standard deviation in the transverse section decreased,while the homogeneity in spot segregation was also *** hardness difference of A and B surfaces at J9 and J15 positions was smaller than 2 HRC,meeting the qualification standard for hardenability.

关键词： Gear steel Continuous casting Solute distribution Dendritic structure Hardenability

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Effects of carbon content on the microstructure and tensile properties of a low-density steel

引用

International Journal of Minerals,Metallurgy and Materials 2025年第2期32卷 391-401页

作者： Yongxuan Shang Mingyu Fan Shuyong Jiang Zhongwu Zhang Key Laboratory of Superlight Materials and Surface Technology Ministry of EducationCollege of Materials Science and Chemical EngineeringHarbin Engineering UniversityHarbin 150001China State Key Laboratory of Metal Material for Marine Equipment and Application Iron&Steel Research Institute of Ansteel Group CorporationAnshan 114009China

Carbon can change the phase components of low-density steels and influence the mechanical *** this study,a new method to control the carbon content and avoid the formation ofδ-ferrite by decarburization treatment was *** microstructural changes and mechanical characteristics with carbon content induced by decarburization were systematically ***-Jaoul(C-J)analysis was employed to examine the work hardening characteristics during the tensile *** decarburization by heat treatments,the carbon content within the austenite phase decreased,while Mn and Al were almost unchanged;this made the steel with full austenite transform into the austenite and ferrite dual ***,(Ti,V)C carbides existed in both matrix phase and the mole fraction almost the *** addition,the formation of other carbides *** loss induced a decrease in strength due to the weakening of the carbon solid *** the steel with the single austinite,the deformation mode of austenite was the dislocation planar glide,resulting in the formation of *** the dual-phase steel,the deformation occurred by the dislocation planar glide of austenite first,with the increase in strain,the cross slip of ferrite took place,forming dislocation cells in *** the late stage of deformation,the work hardening of austinite increased rapidly,while that of ferrite increased slightly.

关键词： low-density steels carbon content decarburization strengthening mechanisms work hardening behavior

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Effect of Aging Treatment on Properties and Post-weld Microstructure of Stainless steel Containing Niobium

引用

稀有金属材料与工程 2025年第1期54卷 39-49页

作者： Liu Tianzeng Zhao Yanchun Chen Anzhong Yu Zhiqi Feng Li Li Jucang Pan Jixiang State Key Laboratory of Advanced Processing and Recycling of Nonferrous Metals Lanzhou University of TechnologyLanzhou 730050China Gansu Jiu steel group Hongxing iron&steel Co. LtdJiayuguan 735100China

The effects of different aging processes on the precipitated phase,mechanical properties,molten salt corrosion resistance and post-weld microstructure of 347H stainless steel were *** results show that a large number of precipitated phases appear in the crystal after aging at 700℃for 400 *** aging for 3000 h,the number of precipitated phases increases and most of them are gathered at the grain *** are two forms of precipitates,one is the coarse precipitate rich in Cr,and the other is the smaller precipitates mainly consisting of *** aging at 700℃for 30 min,the yield strength and tensile strength of the samples at room temperature and 593℃increase,but the elongation *** corrosion results in nitrate at 565℃show that the corrosion products of the aged samples are the same as that of the original samples,which are Fe_(2)O_(3),Fe_(3)O_(4),MgCr_(2)O_(4),MgFe_(2)O_(4),FeCr_(2)O_(4) and NaFeO_(2).The proportion of Fe_(3)O_(4) that is dense and well bonded to the subtrate in the original sample is higher than that in the aged sample,so the corrosion resistance is *** 700℃,the aging time has no obvious effect on the microstructure after welding.

关键词： aging 347H stainless steel precipitated phase mechanical properties molten salt corrosion welding property

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Effect of graphene addition on activation and kinetic properties of La-Mg-Ni-based hydrogen storage alloys

引用

Journal of iron and steel Research International 2025年第1期32卷 227-238页

作者： Dian-chen Feng Chun-ling Zheng Zhi-yuan Zhao Dong-sheng Zhou Hui-ping Ren Yang-huan Zhang School of Materials and Metallurgy Inner Mongolia University of Science and TechnologyBaotou014010Inner MongoliaChina Collaborative Innovation Center of Integrated Exploitation of Bayan Obo Multi-Metal Resources Inner Mongolia University of Science and TechnologyBaotou014010Inner MongoliaChina Department of Functional Material Research China Iron and Steel Research Institute GroupBeijing100081China

The La_(1.7)Pr_(0.3)Mg_(16)Ni hydrogen storage alloy was prepared by medium-frequency induction melting,and then the composite hydrogen storage alloy powder of La_(1.7)Pr_(0.3)Mg_(16)Ni+x wt.%(x=0,2,4,and 6)graphene was prepared by ball milling for 10 *** effect of the addition of graphene on the activation and hydrogen de/absorption properties of La_(1.7)Pr_(0.3)Mg_(16)Ni alloy was *** result demonstrated that these composite alloys were composed of La_(2)Mg_(17),La_(2)Ni_(3),and Mg_(2)Ni *** saturated hydrogen absorption,it was composed of LaH_(3),Mg_(2)NiH_(4),and MgH_(2)phases,while during the dehydrogenation process,it was composed of LaH_(3),Mg,and Mg_(2)Ni *** addition of graphene can help get a more homogeneous granule after ball milling and accelerate the first activation of dehydrogenation/hydrogen *** hydrogen release activation energy of the alloys first decreases and then increases as the graphene content increases from x=0 wt.%to x=6 wt.%.The minimum activation energy of the composite hydrogen storage alloy is 51.22 kJ mol^(-1) when x=4 wt.%.

关键词： La-Mg-Ni alloy Graphene Mechanical ball milling Activation property Dynamic performance

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Microstructure characteristics and corrosion behavior of metal inert gas welded dissimilar joints of 6005A modified by Sc and 5083 alloys

引用

Transactions of Nonferrous Metals Society of China 2025年第1期35卷 60-76页

作者： Guo-fu XU Liang LIU Ying DENG Yu ZENG Jun-chang CAO Lei TANG Xiao-yan PENG Jia-qi DUAN Mei-chan LIANG Qing-lin PAN School of Materials Science and Engineering Central South UniversityChangsha 410083China State Key Laboratory of Power Metallurgy Central South UniversityChangsha 410083China Baoshan iron&steel Co. Ltd.Shanghai 201900China Warwick Manufacturing group The University of WarwickCoventryCV47ALUK Guangdong Weiye Aluminum Factory group Co. Ltd.Foshan 528000China

The corrosion behavior and microstructure characteristics of metal inert gas(MIG)welded dissimilar joints of the 6005A alloy modified with Sc(designated as 6005A+Sc)and the 5083 alloy were investigated using corrosion tests and microscopy *** show that the dissimilar joints exhibit strong stress corrosion cracking(SCC)resistance,maintaining substantial strength during slow strain rate tensile ***,the heat-affected zone(HAZ)and base metal(BM)on the 6005A+Sc side show superior performance in terms of inter-granular corrosion(IGC)and exfoliation corrosion(EXCO)compared to the corresponding zones on the 5083 *** lower corrosion resistance of the 5083-BM and the 5083-HAZ can be attributed to the presence of numerous Al_(2)Mg_(3)phases and micro-scaled Al_(6)(Mn,Fe)intermetallics,mainly distributed along the rolling ***,the enhanced corrosion resistance of the 6005A+Sc-BM and the 6005A+Sc-HAZ can be attributed to the discontinuously distributed grain boundary precipitates(β-Mg_(2)Si),the smaller grain size,and the reduced corrosive current density.

关键词： metal inert gas welding dissimilar joint aluminum alloy corrosion,microstructure

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Absorption mechanism of SO_(3)on various alkaline absorbents in the presence of SO_(2)

引用

Journal of Environmental Sciences 2025年第3期149卷 268-277页

作者： Junxiang Guo Jin Xiong Yuran Li Jirigele Qinggele Tingyu Zhu Shougang group Research Institute of Technology Beijing 100043China Beijing Key Laboratory of Green Recyclable Process for iron&steel Production Technology Beijing 100043China CAS Key Laboratory of Green Process and Engineering Institute of Process EngineeringInnovation Academy for Green ManufactureChinese Academy of SciencesBeijing 100190China WISDRI City Environment Protection Engineering Limited Company Wuhan 430205China

Sulfur trioxide(SO_(3))as a condensable particle matter has a significant influence on atmospheric visibility,which easily arouses formation of *** is imperative to control the SO_(3)emission from the industrial flue *** commonly used basic absorbents,including Ca(OH)_(2),MgO and NaHCO_(3)were selected to explore the effects of temperature,SO_(2)concentration on the SO_(3)absorption,and the reaction mechanism of SO_(3)absorption was further *** suitable reaction temperature for various absorbents were proposed,Ca(OH)_(2)at the high temperatures above 500°C,MgO at the low temperatures below 320°C,and NaHCO_(3)at the temperature range of 320–500°*** competitive absorption between SO_(2)and SO_(3)was found that the addition of SO_(2)reduced the SO_(3)absorption on Ca(OH)_(2)and NaHCO_(3),while had no effect on *** order of the absorption selectivity of SO_(3)follows MgO,NaHCO_(3)and Ca(OH)_(2)under the given conditions in this *** absorption process of SO_(3)on NaHCO_(3)follows the shrinking core model,thus the absorption reaction continues until NaHCO_(3)was exhausted with the utilization rate of nearly 100%.The absorption process of SO_(3)on Ca(OH)_(2)and MgO follows the grain model,and the dense product layer hinders the further absorption reaction,resulting in low utilization of about 50%for Ca(OH)_(2)and *** research provides a favorable support for the selection of alkaline absorbent for SO_(3)removal in application.

关键词： Alkali absorbent Sulfur trioxide Selectivity Shrinking core model Grain model

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

The Mechanism of Heating Rate on the Secondary Recrystallization Evolution in Grain Oriented Silicon steel

引用

Journal of Wuhan University of Technology(Materials Science) 2025年第1期40卷 275-282页

作者： GAO Qian LI Jun WANG Xianhui CAO Laifu GONG Jian LI Bo Central iron and steel Research Institute group Beijing 100081China Shougang Zhixin Electromagnetic Material R&D(Beijing)Co. Ltd.Beijing 101300China Beijing Shougang Co. Ltd.Qian’an 064404China

Grain-oriented silicon steels were prepared at different heating rates during high temperature annealing,in which the evolution of magnetic properties,grain orientations and precipitates were *** illustrate the Zener factor,the diameter and number density of precipitates of interrupted testing samples were statistically *** effect of precipitate ripening on the Goss texture and magnetic property was *** indicated that the trend of Zener factor was similar under different heating rates,first increasing and then decreasing,and that the precipitate maturing was greatly inhibited as the heating rate *** recrystallization was developed at the temperature of 1010℃when a heating rate of 5℃/h was used,resulting in Goss,Brass and{110}oriented grains growing abnormally and a magnetic induction intensity of ***,increasing the heating rate to 20℃/h would inhibit the development of undesirable oriented grains and obtain a sharp Goss ***,when the heating rate was extremely fast,such as 40℃/h,poor secondary recrystallization was developed with many island grains,corresponding to a decrease in magnetic induction intensity to 1.87 *** a suitable heating rate of 20℃/h,the sharpest Goss texture and the highest magnetic induction of 1.94 T with an onset secondary recrystallization temperature of 1020℃were found among the experimental variables in this *** heating rate affected the initial temperature of secondary recrystallization by controlling the maturation of precipitates,leading to the deviation and dispersion of Goss texture,thereby reducing the magnetic properties.

关键词： high temperature annealing heating rate secondary recrystallization grain oriented silicon steel

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

AlN Precipitates and Microstructure in Non-oriented Electrical steels Produced by Twin-roll Casting Process

引用

Acta Metallurgica Sinica(English Letters) 2013年第4期26卷 483-488页

作者： Ting ZHANG Xiaoming ZHANG Zhiyuan GUO Yuqian WANG Chenggang LI Liangyun LAN The State Key Laboratory of Rolling and Automation Northeastern University laiwu iron and steel group Co.Ltd

Aluminum nitride （AIN） precipitates and microstructure of 4 wt.% （Si＋AI） non-oriented electrical steel were investigated. The 2.0 mm thick cast strips with three different silicon/aluminum （Si/AI） ratios were produced by twin-roll casting process, then the strips were reheated, warm rolled, cold rolled and annealed. The microstructure and AIN precipitates were characterized using optical microscopy, scanning electron microscopy and transmission electron microscopy. The results showed that with the increase of Si/AI ratio, on the one hand, the casting microstructure changed from columnar grains to equiaxed grains, and the uniformity of annealed microstructure was improved; On the other hand, the number of AIN precipitates in cast strips reduced meanwhile the distribution became dispersed. By the reheat treatment, the size and distribution of the AIN precipitates can be changed. Moreover, the grain size of the annealed strips is in the range of 20-50 #m, at the same time, many AIN precipitates were located at grain boundaries. Therefore, controlling the Si/AI ratio is a simple method to obtain desired microstructure. Then AIN precipitates in non-oriented electrical steel prepared by twin-roll casting process hinder markedly the recrystallized grains growth, A compatible reheat treatment can be an approach worth exploring to control the behavior of AIN precipitates.

关键词： Twin-roll casting Non-oriented electrical steels Microstructure Aluminum nitride

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Austenite grain growth behavior of Q1030 high strength welded steel

引用

International Journal of Minerals,Metallurgy and Materials 2012年第8期19卷 711-716页

作者： Rong-ting Xiao Hao Yu Ping Zhou School of Materials Science and Engineering University of Science and Technology Beijing Beijing 100083 China laiwu iron & steel group Co. Ltd. Laiwu 271104 China

The austenite grain growth behavior of Q1030 steel was studied under different heating conditions. The austenite grain size increases with the heating temperature and holding time increasing. Austenite grains grow in an exponential manner with rising heating tem- perature and in a parabolic manner with prolonging holding time. A mathematical model for describing the austenite grain growth behavior of Q 1030 steel was obtained on the basis of experimental results using regression analysis. When the heating temperatures lie between 1000 and 1100℃ at a certain holding time, abnormal grain growth appears, which causes mixed grains in Q1030 steel.

关键词： high strength steel heat treatment austenite grain size grain growth mathematical models

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

欢迎您,

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

请选择保存的检索档案：

请选择收藏分类：

通借通还

欢迎您,

建议与咨询 留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

请选择保存的检索档案： 新增检索档案 确定 取消

请选择收藏分类： 新增自定义分类 确定 取消

通借通还

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

请选择保存的检索档案：

请选择收藏分类：