检索结果-南通市图书馆

Application of CFD and FEA Coupling to Predict Structural Dynamic Responses of A Trimaran in Uni-and Bi-Directional Waves

在线全文

学校读者我要写书评

暂无评论

China Ocean Engineering 2024年第1期38卷 81-92页

作者： LIAO Xi-yu XIA Jin-song CHEN Zhan-yang TANG Qin ZHAO Nan ZHAO Wei-dong GUI Hong-bin Marine design&Research Institute of China Shanghai 200011China ship structure Division China Ship Scientific Research CenterWuxi 214082China College of Ocean Engineering Harbin Institute of TechnologyWeihaiWeihai 264209China State Key laboratory of Structural Analysis Optimization and CAE Software for Industrial EquipmentDalian University of TechnologyDalian 116024China School of Foreign Studies Jiangnan UniversityWuxi 214122China

To predict the wave loads of a flexible trimaran in different wave fields,a one-way interaction numerical simulation method is proposed by integrating the fluid solver(Star-CCM+)and structural solver(Abaqus).Differing from the existing coupled CFD-FEA method for monohull ships in head waves,the presented method equates the mass and stiffness of the whole ship to the hull shell so that any transverse and longitudinal section stress of the hull in oblique waves can be ***,verification study and sensitivity analysis are carried out by comparing the trimaran motions using different mesh sizes and time step *** on the wave elevation of uni-and bi-directional waves is also carried *** a comprehensive analysis on the structural responses of the trimaran in different uni-directional regular wave and bi-directional cross sea conditions is carried out,***,the differences in structural response characteristics of trimaran in different wave fields are *** results show that the present method can reduce the computational burden of the two-way fluid-structure interaction simulations.

关键词： CFD-FEA fluid-structure coupling structural responses trimaran bi-directional cross sea

Distributed active vibration control for helicopter based on diffusion collaboration

在线全文

学校读者我要写书评

暂无评论

Chinese Journal of Aeronautics 2024年第8期37卷 208-232页

作者： Yang YUAN Yang LU Xunjun MA Jingliang LI Huiyu YUE National Key laboratory of Helicopter Aeromechanics Nanjing University of Aeronautics and AstronauticsNanjing 210016China Wuhan Second ship design and Research Institute Wuhan 430205China

The active vibration control technology has been successfully applied to several helicopter ***,with the increasing of control scale,traditional centralized control algorithms are experiencing significant increase of computational complexity and physical implementation *** address this issue,a diffusion collaboration-based distributed Filtered-x Least Mean Square algorithm applied to active vibration control is proposed,drawing inspiration from the concept of data fusion in wireless sensor *** algorithm distributes the computation load to each node,and constructs the active vibration control network topology of large-scale system by discarding the weak coupling secondary paths between nodes,achieving distributed active vibration *** order to thoroughly validate the effectiveness and superiority of this algorithm,a helicopter fuselage model is designed as the research ***,the excellent vibration reduction performance of the proposed algorithm is confirmed through ***,specialized node control units are developed,which utilize STM32 microcontroller as the processing ***,a distributed control system is constructed based on multi-processor *** on this foundation,a large-scale active vibration control experimental platform is *** on the platform,experiments are carried out,involving the 4-input 4-output system and the 8-input 8-output *** experimental results demonstrate that under steady-state harmonic excitation,the proposed algorithm not only ensures control effectiveness but also reduces computational complexity by 50%,exhibiting faster convergence speed compared with traditional centralized *** time-varying external excitation,the proposed algorithm demonstrates rapid tracking of vibration changes,with vibration amplitudes at all controlled points declining by over 94%,proving the strong robustness and adaptive capability of the algorithm

关键词： Helicopter Active vibration control Diffusion collaboration Distributed control Experiment

Underwater Directional Acoustic Source Based on Pentamode Material

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Acta Mechanica Solida Sinica 2024年第1期37卷 1-9页

作者： Binghao Zhao Peng Wang Dongwei Wang Gengkai Hu School of Aerospace Engineering Beijing Institute of TechnologyBeijing 100081China Wuhan Second ship design and Research Institute Wuhan 430205China

An underwater directional acoustic emitter is conceived with a highly anisotropic lattice material,whose acoustic characteristics manifest strong dependence on the orientation of the lattice material’s principal *** these features,a cylindrical structure made of such anisotropic lattice material is engineered to possess distinct impedance values in different directions,thereby facilitating wave emission along the principal axis while inducing reflection in other ***,through numerical simulations,it is demonstrated that the emission direction can be effectively manipulated by adjusting the principal axis orientation,concurrently enhancing the emitted *** contrast to previous directional acoustic structures,the compact emitter presented in this study can get rid of the size-wavelength constraint,enabling effective control of low-frequency waves.

关键词： Underwater Directional emission Pentamode material Broadband frequency

Study of the multi-physics field-coupled model of the two-stage electrostatic precipitator

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Building Simulation 2024年第3期17卷 387-398页

作者： Wenjia Hao Yu Guo Yukun Wang Tao Yu Hao Gao Zhengwei Long Tianjin Key laboratory of Indoor Air Environmental Quality Control School of Environmental Science and EngineeringTianjin UniversityWeijin Road 92Tianjin300072China Wuhan Second ship design and Research Institute WuhanChin

The two-stage electrostatic precipitator is widely used to purify oil mist ***,there is limited research on the influences of relative humidity,particle deposition characteristics,and the generation of gaseous ***,this paper established a numerical model of the electrostatic oil mist purifier and applied it to a two-stage electrostatic *** the model was used to investigate the corona discharge characteristics under different relative humidity conditions in the charged zone,the particle deposition characteristics,the purification efficiency,the ozone concentration distribution,and the oil vapor concentration distribution in the collection *** results indicate that,with a constant temperature,the corona current decreases as relative humidity increase,and there is a quadratic relationship between relative humidity and *** variation in relative humidity has little impact on the purification *** maximum ozone concentration occurs near the electrode line,and its concentration is influenced by the discharge current and inlet airflow *** oil vapor concentration reaches its maximum value at the side plates,with a value of 19 ppb,while it reaches the minimum value at the collecting zone electrode plate,with a value of 2 *** temperature is the main factor affecting the volatilization of the oil film,with higher temperatures resulting in higher oil vapor.

关键词： two-stage ESPs particle deposition corona discharge oil vapor

Transient Monte Carlo simulation of phonon transport in silicon nanofilms with the local heat source

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Science China(Technological Sciences) 2024年第7期67卷 2087-2098页

作者： LI JiaQi CAI JiuQing LI Rui LIU ZhiChun LIU Wei School of Energy and Power Engineering Huazhong University of Science and TechnologyWuhan 430074China Wuhan Second ship design and Research Institute Wuhan 430205China

Accurate prediction of junction temperature is crucial for the efficient thermal design of silicon nano-devices. In nano-scale semiconductor devices, significant ballistic effects occur due to the mean free path of phonons comparable to the heat source size and device scale. We employ a three-dimensional non-gray Monte Carlo simulation to investigate the transient heat conduction of silicon nanofilms with both single and multiple heat sources. The accuracy of the present method is first verified in the ballistic and diffusion limits. When a single local heat source is present, the width of the heat source has a significant impact on heat conduction in the domain. Notably, there is a substantial temperature jump at the boundary when the heat source width is 10 *** increasing heat source width, the boundary temperature jump weakens. Furthermore, we observe that the temperature excitation rate is independent of the heat source width, while the temperature influence range expands simultaneously with the increase in heat source width. Around 500 ps, the temperature and heat flux distribution in the domain stabilize. In the case of dual heat sources, the hot zone is broader than that of a single heat source, and the temperature of the hot spot decreases as the heat source spacing increases. However, the mean heat flux remains unaffected. Upon reaching a spacing of 200 nm between the heat sources, the peak temperature in the domain remains unchanged once a steady state is reached. These findings hold significant implications for the thermal design of silicon nano-devices with local heat sources.

关键词： phonon transport Monte Carlo simulation transient heat conduction silicon nanofilms local heat source

A comparative study on mechanical and vibroacoustic performance of sandwich cylindrical shells with positive,negative,and zero Poisson’s ratio cellular cores

在线全文

学校读者我要写书评

暂无评论

Journal of Ocean Engineering and Science 2024年第4期9卷 379-390页

作者： Qing Li Peichang Li Yongjin Guo Xi’an Liu State Key laboratory of Ocean Engineering Shanghai Jiao Tong UniversityShanghai200240China China ship Development and design Center Wuhan430064China MOE Key laboratory of Marine Intelligent Equipment and System Shanghai Jiao Tong UniversityShanghai200240China

Deep-sea submersibles are significant mobile platforms requiring multi-functional capabilities that are strongly determined by the constituent *** cylindrical protective cover can be advanced by designing their sandwiched cellular materials whose physical properties can be readily parameterized and flexibly *** honeycomb materials are capable of possessing tuned positive,negative,or zero Poisson’s ratios(PPR,NPR,and ZPR),which is expected to produce distinct physical performance when utilized as a cellular core of cylindrical shells for the deep-sea submersibles.A novel cylindrical meta-structure sandwiched with the semi-re-entrant ZPR metamaterial has been designed as well as its similarly-shaped sandwich cylindrical shell structures with PPR and NPR *** mechanical and vibroacoustic performance of sandwich cylindrical shells with cellular materials featuring a full characteristic range of Poisson’s ratios are then compared systematically to explore their potential for engineering applications on submerged pressure-resistant *** respective unit cells are designed to feature an equivalent load-bearing *** properties of pressure resistance,buckling,and sound insulation are simulated,respectively,and the orders of each property are then generalized by systematic *** results indicate that the PPR honeycomb core takes advantage of higher structural strength and stability while the ZPR one yields better energy absorption and sound insulation *** NPR one yields moderate properties and has the potential for lower circumferential *** work explores the application of cellular materials with varied Poisson’s ratios and provides guidance for the multi-functional design of sandwich cylindrical meta-structures.

关键词： Sandwich cylindrical shells Poisson’s ratio Pressure-resistant Buckling Vibroacoustic

Impact response and energy absorption of metallic buffer with entangled wire mesh damper

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Defence Technology（防务技术） 2024年第5期35卷 137-150页

作者： Chao Zheng Jun Wu Mangong Zhang Xin Xue Institute of Metal Rubber&Vibration Noise School of Mechanical Engineering and AutomationFuzhou UniversityFuzhou 350116China Wuhan Second ship design and Research Institute Wuhan 430205China

An innovative metallic buffer consisting of series-connected hat-shaped entangled wire mesh damper(EWMD)and parallel springs are proposed in this work to enhance the reliability of engineering *** impact response and the energy dissipation mechanism of hat-shaped EWMD under different quasi-static compression deformations(2-7 mm)and impact heights(100-200 mm)are investigated using experimental and numerical *** results demonstrate distinct stages in the quasi-static mechanical characteristics of hat-shaped EWMD,including stiffness softening,negative stiffness,and stiffness *** loss factor gradually increases with increasing compression deformation before entering the stiffness hardening *** impact loads,the hat-shaped EWMD exhibits optimal impact energy absorption when it enters the negative stiffness stage(150 mm),resulting in the best impact isolation effect of metallic ***,the impact energy absorption significantly decreases when hat-shaped EWMD enters the stiffness hardening ***,quasi-static compression analysis after experiencing different impact loads reveals the disappearance of the negative stiffness ***,with increasing impact loads,the stiffness hardening point progressively shifts to an earlier stage.

关键词： Metallic buffer Hat-shaped EWMD Drop impact Energy absorption characteristics Mechanical behavior

Concept, configuration, and application of on-board nanogrids for use in electric vehicles

在线全文

学校读者我要写书评

暂无评论

Science China(Technological Sciences) 2024年第7期67卷 2053-2073页

作者： ZHAO Bing LI Yong WU Fang WAN JiangHu CAI JiuQing YANG HaiTao LIU Fang College of Electrical and Information Engineering Hunan UniversityChangsha 410082China Wuhan Second ship design and Research Institute Wuhan 430000China School of Automation Central South UniversityChangsha 410083China

Against the backdrop of increasingly serious climate change, researchers are attempting to extend macroscale carbon reduction research to smaller scales. With the rapid development and widespread application of electric vehicles(EVs), an effective approach for carbon reduction based on EVs has the potential to be developed. To coordinate and manage the EV platform in diverse application scenarios, the concept of an on-board nanogrid(OBNG), in which a nanogrid is combined with the EV, is proposed and defined, and the characteristics summarized. A configuration that includes a physical layer with the on-board hardware system;an information layer for logical control, energy management, and communication coordination;and an application layer that can cope with different working environments is proposed. A detailed introduction to the basic architecture and management mode of each layer is provided along with information concerning the relevant technologies for coordinated operation. New ideas and approaches to improve the existing performance are proposed, and finally, combined with a background of smart and low-carbon cities, major application scenarios are envisioned.

关键词： electric vehicle nanogrid energy management hybrid energy storage power electronics converter

Numerical analysis of the correlation between fluid dynamic modes and hydrodynamic noise in flows around a three-dimensional circular cylinder

在线全文

学校读者我要写书评

暂无评论

Journal of Hydrodynamics 2024年第1期36卷 119-129页

作者： Jia-jia Qin Ming-xin Zou Yuan Zhuang De-cheng Wan Computational Marine Hydrodynamics Lab(CMHL) School of Naval ArchitectureOcean and Civil EngineeringShanghai Jiao Tong UniversityShanghai200240China Wuhan Second ship design and Research Institute Wuhan430205China

The flow around a circular cylinder for Re=1000 is characterized by flow separation and Karman vortex *** typical flow features can be captured to study the correlation between fluid fields and sound *** this paper,the three-dimensional circular cylinder is taken as the research object,and the probes of surface fluctuating pressure and far field sound pressure are arranged every 10°.The directional diagram and the coherence of fluctuating pressure and sound pressure are *** relationship between the flow mode and hydrodynamic noise is studied by using dynamic mode decomposition(DMD).The characteristics of the dipole and quadrupole sound source term of a long span cylinder are *** results show that at the angles between 30°–120°and 190°–350°,the fluctuating pressure contributes more to the generation of dipole *** quadrupole sound source shows three-dimensional effects,which is more obvious in a cylinder with large spanwise length.

关键词： Pressure coherence dynamic mode decomposition flow-sound correlation circular cylinder