检索结果-南通市图书馆

Interfacial Zn2+-solvation regulator towards reversible and stable Zn anode

Journal of Energy Chemistry 2025年第1期100卷 684-692页

作者： Miao Zhou Xiongbin Luo Hang Li Shan Guo Zhuang Tong Xiaotao Zhou Xu Li Zhaohui Hou Shuquan Liang Guozhao Fang College of Mechanical Engineering Key Laboratory of Hunan Province for Advanced Carbon-based Functional Materials Hunan Institute of Science and Technology School of materials science and Engineering Key Laboratory of Electronic Packaging and Advanced Functional Materials of Hunan Province Central South University College of materials and Metallurgy Guizhou University National Energy Metal Resources and New materials Key laboratory Central South University

Aqueous zinc-ion batteries （AZIBs） are fundamentally challenged by the instability of the electrode/electrolyte interface,predominantly due to irreversible zinc （Zn） deposition and hydrogen ***,the intricate mechanisms behind the electrochemical discrepancies induced by interfacial Zn2+-solvation and deposition behavior demand comprehensive *** molecules endowed with special functional groups （such as hydroxyl,carboxyl,etc.） have the potential to significantly optimize the solvation structure of Zn2+and regulate the interfacial electric double layer （EDL）.By increasing nucleation overpotential and decreasing interfacial free energy,these functional groups facilitate a lower critical nucleation radius,thereby forming an asymptotic nucleation model to promote uniform Zn ***,this study presents a pioneering approach by introducing trace amounts of n-butanol as solvation regulators to engineer the homogenized Zn （H-Zn） anode with a uniform and dense *** interfacial reaction and structure evolution are explored by in/ex-situ experimental techniques,indicating that the H-Zn anode exhibits dendrite-free growth,no by-products,and weak hydrogen evolution,in sharp contrast to the bare ***,the H-Zn anode achieves a remarkable Zn utilization rate of approximately 20% and simultaneously sustains a prolonged cycle life exceeding 500 ***,the H-Zn//NH4V4O10（NVO） full battery showcases exceptional cycle stability,retaining 95.04%capacity retention after 400 cycles at a large current density of 5 A *** study enlightens solvation-regulated additives to develop Zn anode with superior utilization efficiency and extended operational lifespan.

关键词： Solvation

来源：

同方期刊数据库评论

在线全文

同方期刊数据库

学校读者我要写书评

暂无评论

Plasmonic tandem heterojunctions enable high-efficiency charge transfer for broad spectrum photocatalytic hydrogen production

引用

Journal of Energy Chemistry 2025年第1期100卷 710-720页

作者： Wenxuan Chen Xiu-Qing Qiao Guo Hui Bojing Sun Dongfang Hou Meidi Wang Xueqian Wu Tao Wu Dong-Sheng Li College of materials and Chemical Engineering Key Laboratory of Inorganic Nonmetallic Crystalline and Energy Conversion Materials China Three Gorges University Hubei Three Gorges laboratory College of Chemistry and materials science and Guangdong Provincial Key Laboratory of Supramolecular Coordination Chemistry Jinan University

Rational engineering of semiconductor photocatalysts for efficient hydrogen production is of great significance but still challenging,primarily due to the limitations in charge transfer ***,a fascinating plasmonic tandem heterojunction with the hc-CdS/Mo2C@C heterostructure is aimfully prepared for effectively promoting the charge separation kinetics of the CdS photocatalyst via the synergistic strategy of phase junction,Schottky junction,and photothermal *** difference in atomic configuration between cubic-CdS （c-CdS） and hexagonal-CdS （h-CdS） leads to effective charge separation through a typical Ⅱ charge transfer mechanism,and plasmonic Schottky junction further extracts the electrons in the hc-CdS phase junction to realize gradient charge ***,the photothermal effect of Mo2C@C helps to expand the light absorption,accelerate charge transfer kinetics,and reduce the hydrogen evolution energy *** carbon layer provides a fast channel for charge transfer and protects the photocatalyst from *** a result,the optimized hc-CMC photocatalyst exhibits a significantly high photocatalytic H2production activity of 28.63 mmol/g/h and apparent quantum efficiency of 61.8%,surpassing most of the reported *** study provides a feasible strategy to enhance the charge transfer kinetics and photocatalytic activity of CdS by constructing plasmonic tandem heterogeneous junctions.

关键词： Cadmium sulfide

来源：

同方期刊数据库评论

在线全文

同方期刊数据库

学校读者我要写书评

暂无评论

Near-perfect replication on amorphous alloys through active force modulation based on machine learning/neural network parameter prediction

引用

science China(Physics,Mechanics & Astronomy) 2025年第1期Mechanics & Astronomy) .卷 181-191页

作者： Senkuan Meng Zheng Wang Ruisong Zhu Ruijie Liu Jiang Ma Lina Hu Weihua Wang Key laboratory for Liquid-Solid Structural Evolution and Processing of materials (Ministry of Education) School of Materials Science and Engineering Shandong University College of Mechatronics and Control Engineering Shenzhen University Songshan Lake materials laboratory Institute of Physics Chinese Academy of Sciences

As a microforming technique, micro/nano-structural replication possesses advantages of high precision and efficiency. With the remarkable superplasticity in the supercooled liquid region, amorphous alloys or metallic glasses(MGs) are regarded as ideal materials for miniature fabrication. However, due to the intrinsic metastable nature of supercooled liquids, the design of imprinting processes for MGs poses a challenge. In the past, process parameters have largely relied on trial-and-error *** this work, a low-frequency active force modulation system is employed to apply a stable, precise, and real-time feedback stress field for imprinting of MG samples. Low-frequency vibrations can facilitate the filling of microstructures on the template surface by reducing the effective viscosity of the supercooled liquid. With the dataset composed of orthogonal experiments, a machine learning strategy based on back-propagation(BP) neural networks was utilized to construct a 3D parameter space for temperature, stress, and time, and to predict the corresponding filling ratio. Furthermore, the optimal combination of imprinting process parameters was identified, and its filling ratio was experimentally validated to reach as high as 0.94. The near-perfect replication of microstructures confirms the superiority of the active force modulation system and the data-driven strategy of machine learning-assisted parameter design. At the same time, this one-step microforming process provides a new approach to addressing the accuracy-cost trade-off dilemma in precision manufacturing.

关键词： metallic glass amorphous alloy microforming imprinting machine learning

来源：

同方期刊数据库评论

在线全文

同方期刊数据库

学校读者我要写书评

暂无评论

Rational modulation of fluorophosphate cathode by anionic groups to reduce the polarization behavior for fast-charging sodium-ion batteries

引用

Journal of Energy Chemistry 2025年第1期100卷 509-521页

作者： Xinyuan Wang Fan Zhang Xingyu Zhou Qian Wang Changyu Liu Yangyang Liu Hui Wang Xiaojie Liu Key laboratory of Synthetic and Natural Functional Molecule of the Ministry of Education College of Chemistry & Materials Science Northwest University

Na3V2（PO4）2O2F （VP） is recognized as a promising cathode material for sodium-ion batteries due to its stable structural framework and high specific *** functional theory （DFT） and finite element simulations show that incorporating SO42-into VP decreases its band gap,lowers the migration energy barrier,and ensures a uniform Na+concentration gradient and stress distribution during charge and discharge ***,the average Na+diffusion coefficient of Na3V2（PO4）1.95（SO4）0.05O2F（VPS-1） is roughly double that of VP,leading to enhanced rate capability (80 C,75.5 mAh g-1) and cycling stability (111.0 mAh g-1capacity after 1000 cycles at 10 C current density) for ***-1 exhibits outstanding fast-charging capabilities,achieving an 80%state of charge in just 8.1 *** assembled VPS-1//SbSn/NPC full cell demonstrated stable cycling over 200 cycles at a high 5 C current,maintaining an average coulombic efficiency of 95.35%.

关键词： Anionic group modulation Polarization behavior Fast-charging Sodium-ion battery Fluorophosphate Cathode

来源：

同方期刊数据库评论

在线全文

同方期刊数据库

学校读者我要写书评

暂无评论

Ideal Bi‑Based Hybrid Anode Material for Ultrafast Charging of Sodium‑Ion Batteries at Extremely Low Temperatures

引用

Nano-Micro Letters 2025年第3期17卷 152-167页

作者： Jie Bai Jian Hui Jia Yu Wang Chun Cheng Yang Qing Jiang Key laboratory of Automobile materials(Jilin University) Ministry of EducationSchool of Materials Science and EngineeringJilin UniversityChangchun 130022People’s Republic of China

Sodium-ion batteries have emerged as competitive substitutes for low-temperature applications due to severe capacity loss and safety concerns of lithium-ion batteries at−20°C or ***,the key capability of ultrafast charging at ultralow temperature for SIBs is rarely ***,a hybrid of Bi nanoparticles embedded in carbon nanorods is demonstrated as an ideal material to address this issue,which is synthesized via a high temperature shock *** a hybrid shows an unprecedented rate performance(237.9 mAh g^(−1)at 2 A g^(−1))at−60℃,outperforming all reported SIB anode *** with a Na_(3)V_(2)(PO_(4))_(3)cathode,the energy density of the full cell can reach to 181.9 Wh kg^(−1)at−40°*** on this work,a novel strategy of high-rate activation is proposed to enhance performances of Bi-based materials in cryogenic conditions by creating new active sites for interfacial reaction under large current.

关键词： Bi nanoparticles High temperature shock High-rate activation Ultrafast charging Low-temperature sodium-ion batteries

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Defect Engineering with Rational Dopants Modulation for High‑Temperature Energy Harvesting in Lead‑Free Piezoceramics

引用

Nano-Micro Letters 2025年第3期17卷 87-101页

作者： Kaibiao Xi Jianzhe Guo Mupeng Zheng Mankang Zhu Yudong Hou Key laboratory of Advanced Functional materials Ministry of EducationCollege of Materials Science and EngineeringBeijing University of TechnologyBeijing 100124People’s Republic of China

High temperature piezoelectric energy harvester(HTPEH)is an important solution to replace chemical battery to achieve independent power supply of HT wireless ***,simultaneously excellent performances,including high figure of merit(FOM),insulation resistivity(ρ)and depolarization temperature(Td)are indispensable but hard to achieve in lead-free piezoceramics,especially operating at 250°C has not been reported ***,well-balanced performances are achieved in BiFeO3–BaTiO3 ceramics via innovative defect engineering with respect to delicate manganese *** to the synergistic effect of enhancing electrostrictive coefficient by polarization configuration optimization,regulating iron ion oxidation state by high valence manganese ion and stabilizing domain orientation by defect dipole,comprehensive excellent electrical performances(Td=340°C,ρ250°C>10^(7)Ωcm and FOM_(250°C)=4905×10^(–15)m^(2)N^(−1))are realized at the solid solubility limit of manganese *** HT-PEHs assembled using the rationally designed piezoceramic can allow for fast charging of commercial electrolytic capacitor at 250°C with high energy conversion efficiency(η=11.43%).These characteristics demonstrate that defect engineering tailored BF-BT can satisfy high-end HT-PEHs requirements,paving a new way in developing selfpowered wireless sensors working in HT environments.

关键词： Lead-free piezoceramic Defect engineering Dopants modulation High-temperature Piezoelectric energy harvester

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Photo‑Energized MoS_(2)/CNT Cathode for High‑Performance Li–CO_(2)Batteries in a Wide‑Temperature Range

引用

Nano-Micro Letters 2025年第1期17卷 160-175页

作者： Tingsong Hu Wenyi Lian Kang Hu Qiuju Li Xueliang Cui Tengyu Yao Laifa Shen Jiangsu Key laboratory of materials and Technologies for Energy Storage College of Materials Science and TechnologyNanjing University of Aeronautics and AstronauticsNanjing 210016People’s Republic of China

Li–CO_(2) batteries are considered promising energy storage systems in extreme environments such as Mars;however,severe performance degradation will occur at a subzero temperature owning to the sluggish reaction ***,a photo-energized strategy adopting sustainable solar energy in wide working temperature range Li–CO_(2) battery was achieved with a binder-free MoS_(2)/carbon nanotube(CNT)photo-electrode as *** unique layered structure and excellent photoelectric properties of MoS_(2) facilitate the abundant generation and rapid transfer of photo-excited carriers,which accelerate the CO_(2) reduction and Li_(2)CO_(3) decomposition upon *** illuminated battery at room temperature exhibited high discharge voltage of 2.95 V and mitigated charge voltage of 3.27 V,attaining superior energy efficiency of 90.2%and excellent cycling stability of over 120 *** at an extremely low temperature of−30℃,the battery with same electrolyte can still deliver a small polarization of 0.45 V by the photoelectric and photothermal synergistic mechanism of MoS_(2)/CNT *** work demonstrates the promising potential of the photo-energized wide working temperature range Li–CO_(2) battery in addressing the obstacle of charge overpotential and energy efficiency.

关键词： Li-CO_(2)batteries Photo-energized Wide operation-temperature Kinetics MoS_(2)

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Universal design of three-dimensional porous graphene-iron based promotors for kinetically rationalized lithium-sulfur chemistry

引用

Journal of Energy Chemistry 2025年第1期100卷 192-200页

作者： Hua Gao Yunfeng Zhang Menglei Wang Ruoxuan Yang Shuai Feng Xuan Cao Yaping Zhang Zhongyuan Lu Yingze Song State Key laboratory of Environment-Friendly Energy materials School of Materials and Chemistry Southwest University of Science and Technology School of Material science and Engineering Henan University of Technology College of Chemistry and Chemical Engineering Taishan University

Lithium-sulfur （Li-S） batteries are widely deemed to be one of the most potential candidates for future secondary batteries because of their remarkable energy ***,notorious polysulfide shuttling and retarded sulfur reaction kinetics pose significant obstacles to the further application of Li-S *** rationally designed highly active electrocatalysts can facilitate polysulfide conversion,the universal and scalable synthesis strategies need to be ***,a universal synthetic strategy to construct a series of three-dimensional （3D） porous graphene-iron （3DGr-Fe） based electrocatalysts involving 3DGr-FeP,3DGr-Fe3C,and 3DGr-Fe3Se4is exploited for manipulating the Li-S redox *** has been observed that the implementation of a 3D porous Gr architecture leads to the well-designed conductive networks,while the uniformly dispersed iron nanoparticles introduce an abundance of active sites,fostering the lithium polysulfide conversion,thereby bolstering the overall electrochemical *** Li-S battery with the 3DGr-Fe based electrocatalyst exhibits remarkable capacity retention of 94.8%upon 100 times at 0.2 ***,the soft-packaged Li-S pouch cell based on such a 3DGr-Fe electrocatalyst delivers superior capacity of 1060.71 mA h g-1and guarantees for the continuous 30 min work of fan *** investigation gives comprehensive insights into the design,synthesis,and mechanism of 3DGr-Fe based electrocatalysts with high activity toward efficient and durable Li-S batteries.

关键词： Redox reactions

来源：

同方期刊数据库评论

在线全文

同方期刊数据库

学校读者我要写书评

暂无评论

Viscosity and structure relationship with equimolar substitution of CaO with MgO in the CaO–MgO–Al_(2)O_(3)–SiO_(2)slag melts

引用

International Journal of Minerals,Metallurgy and materials 2025年第1期32卷 70-79页

作者： Yong Hou Shuo Zhang Jie Dang Jia Guo Hanghang Zhou Xuewei Lü College of materials science and Engineering Chongqing UniversityChongqing 400044China Chongqing Key laboratory of Vanadium-Titanium Metallurgy and New materials Chongqing UniversityChongqing 400044China

Currently,the Al_(2)O_(3)content in the high-alumina slag systems within blast furnaces is generally limited to 16wt%–18.5wt%,making it challenging to overcome this *** most studies that concentrated on managing the MgO/Al_(2)O_(3)ratio or basicity,this paper explored the effect of equimolar substitution of MgO for CaO on the viscosity and structure of a high-alumina CaO-MgO-Al_(2)O_(3)-SiO_(2)slag system,providing theoretical guidance and data to facilitate the application of high-alumina *** results revealed that the viscosity first decreased and then increased with higher MgO substitution,reaching a minimum at 15mol%MgO *** transform infrared spectroscopy(FTIR)results found that the depths of the troughs representing[SiO_(4)]tetrahedra,[AlO_(4)]tetrahedra,and Si-O-Al bending became progressively deeper with increased MgO *** of the Raman spectra showed that the average number of bridging oxygens per Si atom and the X_(Q^(3))/X_(Q^(2))(X_(Q^(i))is the molar fraction of Q^(i) unit,and i is the number of bridging oxygens in a[SiO_(4)]tetrahedral unit)ratio increased from 2.30 and 1.02 to 2.52 and 2.14,respectively,indicating a progressive polymerization of the silicate structure.X-ray photoelectron spectroscopy(XPS)results highlighted that non-bridging oxygen content decreased from 77.97mol% to 63.41mol% with increasing MgO concentration,whereas bridging oxygen and free oxygen contents *** analysis demonstrated a gradual increase in the polymerization degree of the tetrahedral structure with the increase in MgO ***,bond strength is another important factor affecting the slag *** occurrence of a viscosity minimum can be attributed to the complex evolution of bond strengths of non-bridging oxygens generated during depolymerization of the[SiO_(4)]and[AlO_(4)]tetrahedral structures by CaO and MgO.

关键词： aluminosilicate viscosity structure spectroscopy

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Dielectric-ion-conductive ZnNb2O6 layer enabling rapid desolvation and diffusion for dendrite-free Zn metal batteries

引用

Journal of Energy Chemistry 2025年第1期100卷 693-701页

作者： Haifeng Yang Jian Wang Panpan Zhang Xiaomin Cheng Qinghua Guan Jing Dong Bixian Chen Lujie Jia Jing Zhang Yongzheng Zhang Yunjian Liu Hongzhen Lin School of materials science and Engineering Jiangsu University i-Lab & CAS Key laboratory of Nanophotonic materials and Devices Suzhou Institute of Nano-Tech and Nano-Bionics Chinese Academy of Sciences Helmholtz Institute Ulm (HIU) Karlsruhe Institute of Technology (KIT) School of materials science and Engineering Xi'an University of Technology State Key laboratory of Chemical Engineering East China University of Science and Technology

Rechargeable aqueous zinc-metal batteries （AZMBs） are promising candidates for large-scale energy storage systems due to their low cost and high ***,their performance and sustainability are significantly hindered by the sluggish desolvation kinetics at the electrode/electrolyte interface and the corresponding hydrogen evolution reaction where active water molecules tightly participate in the Zn（H2O）62+solvation ***,learnt from self-generated solid electrolyte interphase （SEI） in anodes,the dielectric but ion-conductive zinc niobate nanoparticles artificial layer is constructed on metallic Zn surface （ZNB@Zn）,acting as a rapid desolvation *** zincophilic and dielectric-conductive properties of ZNB layer accelerate interfacial desolvation/diffusion and suppress surface corrosion or dendrite formation,achieving uniform Zn plating/stripping behavior,as confirmed by electronic/optical microscopies and interface spectroscopical measurements together with theoretical ***,the as-prepared ZNB@Zn electrode exhibits excellent cycling stability of over 2000 h and robust reversibility （99.54%） even under high current density and depth of discharge ***,the assembled ZNB@Zn-based full cell displays high capacity-retention rate of 80.21%after 3000 cycles at 5 A g-1and outstanding rate performance up to 10 A *** large-areal pouch cell is stabilized for hundreds of cycles,highlighting the bright prospects of the dielectric but ion-conductive layer in further application of AZMBs.

关键词： Zn metal battery Dielectric artificial layer Rapid ion diffusion Zincophilic diffusion Active water inhibition

来源：

同方期刊数据库评论

在线全文

同方期刊数据库

学校读者我要写书评

暂无评论

欢迎您,

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

请选择保存的检索档案：

请选择收藏分类：

通借通还

欢迎您,

建议与咨询 留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

请选择保存的检索档案： 新增检索档案 确定 取消

请选择收藏分类： 新增自定义分类 确定 取消

通借通还

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

请选择保存的检索档案：

请选择收藏分类：