检索结果-南通市图书馆

The Mechanical Properties of the System and Training Zr59Nb5Cu18Ni8AL10 Bulk Metallic Glasses

Advances in Chemical Engineering and Science 2013年第4期3卷 274-277页

作者： Nasr-Eddine Chakri Badis Bendjemil M. Baricco lasea Department of Physic University of Badji Mokhtar Annaba Algeria

In the present work, the glass formation of Zr59Nb5Cu18Ni8Al10 (numbers indicate at %) alloy with diameter of 2 mm was prepared through water-cooled copper mold casting and in a ribbon form by the single roller melt-spinning method. This study is primarily devoted to evaluating the results obtained with the two methods of the development. The thermal stability was evaluated by differential scanning calorimetry (DSC) at a heating rate of 10℃/mn. The characteristic data of the bulk metallic glass are presented, including glass transition temperature (Tg) and crystallization temperature (Tx). The microstructure and constituent phases of the alloy composite have been analyzed by using X-ray diffraction, and observed by Scanning Electron Microscopy (SEM). The mechanical properties of bulk Zr59Nb5Cu18Ni8Al10 were alloy measured by compression tests at room temperature.

关键词： Ribbon and Bulk Metallic Glasses Amorphous Fracture Morphology Mechanical Properties

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Synthesis of Ti3SiC2-Bicarbide Based Ceramic by Electro-Thermal Explosion

引用

Advances in Chemical Engineering and Science 2014年第2期4卷 242-249页

作者： Nasr-Eddine Chakri Zoubida Habes Abdelaziz Toubal Badis Bendjemil 1Physic Department Badji-Mokhtar University Annaba Algeria 2Laboratory Environmentally Security and Alimentary (LASEA) Badji-Mokhtar University Annaba Algeria Laboratory Environmentally Security and Alimentary (lasea) Badji-Mokhtar University Annaba Algeria Physic Department Badji-Mokhtar University Annaba Algeria

A polycrystalline dense Ti3SiC2 based ceramic material has been produced by several techniques. The effect of addition of TiC and SiC is also studied. The Ti3SiC2 material shows extraordinary electrical, thermal and mechanical properties. Furthermore, it shows a damage tolerance capability and oxidation resistance. In this work, we have synthesized Ti3SiC2 by electro-thermal explosion chemical reaction (ETE) with high current density (900 Amperes/a.u) followed by uniaxial pressure. The structural properties of the as-prepared materials are studied by x-ray diffraction (XRD), scanning electron microscope (SEM) and energy dispersive x-ray spectroscopy (EDX) techniques. The chemical cartography, imaging and electronic properties are investigated using Ultra-STEM and electron high energy loss resolution spectroscopy (EELS) techniques, respectively. The surface of Ti3SiC2 is characterized by means of X-ray photoelectron spectroscopy (XPS). High resolution C 1s, Si 2p, Ti 2p, Ti 3s core level spectra are explained in terms of crystallographic and electronic structure. Valence band spectrum is performed to confirm the validity of the theoretical calculations.

关键词： Ti3SiC2 Based Ceramic Intermetallic Bicarbide Electro-Thermal Explosion Reaction (ETE) Valence Band Spectra Core Level Excitation

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Preparation and Characterization of Fe-Based Metallic Glasses with Pure and Raw Elements

引用

Chinese Physics Letters 2012年第11期29卷 207-210页

作者： Nassima Seghairi Badis Bendjemil Gabriel Lavorato Alberto Castellero Marcello Baricco Dipartimento di Chimica I.F.M/NIS/CNISM/INSTM Universitàdi TorinoVia Giuria 910125 TrinoItaly University of Larbi Ben M'hidi Oum El BouaghiAlgeria lasea Faculty of SciencesDepartment of ChimistryUniversity of AnnabaAlgeria University of Guelma P.O.Box 1224000 GuelmaAlgeria

Amorphous alloys with a composition(at.%)Fe_(48)Cr_(15)Mo_(14)C_(15)B_(6)Y_(2) were prepared by using either pure elements(alloy B1)or a commercial AISI430 steel as a base material(B2).When prepared from pure elements,alloy(B1)could be cast in plate form with a fixed thickness of 2 mm and variable lengths between 10 and 20 mm by means of copper-mold injection in an air *** the case of alloy B2,prepared by using commercial grade raw materials,rods of 2 mm diameter are ***(B1 and B2)of width 5 mm and thickness about 30μm are prepared from the arc-melted ingots using a single roller melt spinner at a wheel speed of 40 m/*** thermal and structural properties of the samples are measured by a combination of differential scanning calorimetry(DSC),x-ray diffraction and scanning electron *** compositions are checked by energy dispersive spectroscopy analysis.X-ray diffraction and scanning electron microscopy observations confirm that an amorphous structure is obtained in all the samples.A minor fraction of crystalline phases(oxides and carbides)is detected on the as-cast *** of hardness and Young modulus were measured by nanoindentation for both the *** effects of adverse casting conditions(such as air atmosphere,non-conventional injection copper mold casting and the partial replacement of pure elements with commercial grade raw materials)on the glass formation and properties of the alloy are discussed.

关键词： alloy casting roller

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Crystallization Kinetics and Magnetic Properties of Fe40Ni40B20Bulk Metallic Glass

引用

Advances in Chemical Engineering and Science 2014年第1期4卷 36-38页

作者： Nasr-Eddine Chakri Badis Bendjemil M. Baricco lasea Department of Chemistry University of Badji Mokhtar Annaba Algeria lasea Department of Chemistry University of Badji Mokhtar Annaba Algeria University of 08 mai 1945 Guelma Guelma Algeria Università di Torino Via P. Giuria 9 Torino Italy Università di Torino Via P. Giuria 9 Torino Italy

Fe-based bulk metallic glasses (BMGs) have been extensively studied due to their potential technological applications and their interesting physical properties such as a low modulus of elasticity, high yielding stress and good magnetic properties. In the present work, the bulk metallic glass (BMG) formation of Fe40Ni40B20 (numbers indicate at %) with a ribbon form was fabricated by the single roller melt-spinning method. Rapid solidification leads to a fully amorphous structure for all compositions. The thermal properties associated with crystallization temperature of the glassy samples were measured using differential scanning calorimetry (DSC) at a heating rate of 10℃/mn. The microstructure and constituent phase of the alloy composite have been analyzed by using X-ray diffractometry (XRD). The effect of high temperature on the isothermal crystallization of Fe40Ni40B20 ribbon was investigated by HTX-ray diffraction. In addition, these ribbon glasses also exhibit good soft magnetic properties with M-H curvature measured under the magnetic fields between –1 kOe and 1 kOe.

关键词： Bulk Metallic Glasses DSC XRD Method HTX Magnetic Properties

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

欢迎您,

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

在线全文

在线全文

在线全文

在线全文

请选择保存的检索档案：

请选择收藏分类：

通借通还

欢迎您,

建议与咨询 留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

在线全文

在线全文

在线全文

在线全文

请选择保存的检索档案： 新增检索档案 确定 取消

请选择收藏分类： 新增自定义分类 确定 取消

通借通还

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

请选择保存的检索档案：

请选择收藏分类：