检索结果-南通市图书馆

Acoustic characterization of hydrate formation and decomposition in clay-bearing sediments

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Petroleum Science 2024年第4期21卷 2830-2838页

作者： Yi-Jian Zhu Xiao-Mei Yang Xing Huang Hao Li Xiao-Hui Wang Yi-Fei Sun Peng Xiao Chang-Yu Sun Guang-Jin Chen state Key Laboratory of Heavy Oil Processing College of Chemical Engineering and Environment China University of Petroleum

Understanding the acoustic characteristics of hydrates in various sediments is crucial for hydrate resource detection and safe and efficient exploitation, as hydrate occurrence patterns vary greatly in different sediments. In this work, sediments with different bentonite contents, water saturations, and types were prepared to investigate the characteristics of P-wave velocity(reflecting the magnitude of hydrate saturation in the sediment) and amplitude(reflecting the degree of hydrate-sediment cementation) during hydrate formation and depressurization. During hydrate formation, the P-wave velocity and amplitude have similar trends. As clay content increases, the P-wave velocity increase rates quickened. On the other hand, the increased rate of P-wave velocity slows down with the increase of water saturation in the clay-bearing sediments. Comparing various types of sediment shows that the water absorption and swelling of bentonite reduce the pore space, speeding up the cementation of the hydrate with the sediment and increasing P-wave velocity at a faster rate. Correspondence between P-wave velocity and hydrate saturation is strongly related to sediment type, clay content, and water *** rapidly decreasing amplitude in the early stage of hydrate depressurization indicates that hydrate in clay-bearing sediments is weakly cemented to the sediments, which is prone to stratigraphic *** findings of this study offer guidance for hydrate resource assessments in clay-bearing sediments as well as geologic risk estimations during hydrate mining.

关键词： gas hydrate bentonite illite P-wave velocity amplitude

Fabrication and properties of lightweight zirconia with fine closed porosity

同方期刊数据库评论

在线全文

同方期刊数据库

学校读者我要写书评

暂无评论

Journal of Iron and Steel Research International 2024年第6期31卷 1449-1458页

作者： Yi-bo Zhang Hua-zhi Gu Lv-ping Fu Ao Huang Mei-je Zhang The state Key Laboratory of Refractories and Metallurgy Wuhan University of Science and TechnologyWuhan 430081HubeiChina

Lightweight refractory materials with thermal insulation properties and erosion resistance are advantageous for hightemperature *** zirconia refractories were prepared using starch as a pore-forming agent,basic magnesium carbonate as a stabilizer,and nano-zirconia as an *** effects of the nano-zirconia content on the pore and thermal insulation properties of the lightweight zirconia refractories were investigated based on the porosity,phase composition,microstructure,and thermal ***-zirconia was shown to have a high surface energy,and its addition effectively increased the driving force for sintering,reduced the sintering temperature,and promoted the sintering reaction,thereby reducing the apparent porosity and improving the density of the prepared *** to the superplasticity of nano-zirconia,the surface stress caused plastic deformation between particles,which increased the migration rate of grain boundaries and trapped more gas inside the material before it diffused to the surface,thereby enhancing the closed porosity of the *** presence of closed pores could extend the thermal conduction path,decrease the conduction rate,and hinder the conduction effect to effectively reduce the thermal conductivity of the *** a nano-zirconia content of 0.75 wt.%,the prepared lightweight zirconia had the highest closed porosity and the lowest thermal *** apparent porosity,closed porosity,and total porosity of the material were 2.8%,7.0%,and 9.8%,respectively,and the thermal conductivity at 800℃was 1.37 W m^(-1)k^(-1).

关键词： Sintering Nano-zirconia Closed pore:Thermal conductivity Refractory material

High-temperature wetting behavior between slag and refractory

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Journal of Iron and Steel Research International 2024年第6期31卷 1304-1319页

作者： Yong-xin Wang Ya-ge Li Ya-bo Gao Zhong Huang Hai-jun Zhang The state Key Laboratory of Refractories and Metallurgy Wuhan University of Science and TechnologyWuhan 430081HubeiChina

Slag corrosion is one of the main factors of the damage of refractory,and its primary manifestations involve the melting of refractory in slag and the slag penetration into refractory,both of which are highly related to the wetting behavior between slag and *** high-temperature wettability could be characterized by parameters including the surface tension,adhesion work,and spreading coefficient of the slag on refractory surface,and it could be suppressed by altering the slag/refractory interface,thus resulting in an improved anti-corrosion *** this,the key knowledges of the slag corrosion,theory of wetting behavior and test of high-temperature contact angle were firstly ***,the major factors influencing the high-temperature slag wetting behavior were discussed based on the aspects of slag composition,refractory composition,and surface ***,the future research direction was proposed in this field.

关键词： High-temperature wetting Refractory Slag corrosion Surface tension

Large post-liquefaction deformation of sand:Mechanisms and modeling considering water absorption in shearing and seismic wave conditions

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Underground Space 2024年第5期18卷 3-64页

作者： Jian-Min Zhang Rui Wang Department of Hydraulic Engineering State Key Laboratory of Hydroscience and EngineeringTsinghua UniversityBeijing 100084China

Large deformation of sand due to soil liquefaction is a major cause for seismic *** this study,the mechanisms and modeling of large post-liquefaction deformation of sand considering the significant influence of water absorption in shearing and seismic wave *** of case histories from past earthquakes and review of existing studies highlight the importance of the two *** on the micro and macro scale mechanisms for post-liquefaction shear deformation,the mechanism for water absorption in shearing after initial liquefaction is *** is aided by novel designed constant water-absorption-rate shear *** absorption in shearing can be classified into three types,including partial water absorption,complete water absorption,and compulsory water *** the influence of water absorption in shearing,even a strongly dilative sand under naturally drained conditions could experience instability and large shear *** mechanism for amplification of post-liquefaction deformation under surface wave load is also explained via element tests and theoretical *** shows that surface wave–shear wave coupling can induce asymmetrical force and resistance in sand,resulting in asymmetrical accumulation of deformation,which is amplified by liquefaction.A constitutive model,referred to as CycLiq,is formulated to capture the large deformation of sand considering water absorption in shearing and seismic wave conditions,along with its numerical implementation *** model is comprehensively calibrated based on various types of element tests and validated against centrifuge shaking table tests in the liquefaction experiments and analysis projects(LEAP).The model,along with various numerical analysis methods,is adopted in the successful simulation of water absorption in shearing and Rayleigh wave-shear wave coupling induced large liquefaction ***,the model is applied to high-performance simulation fo

关键词： Liquefaction Sand Large deformation Water absorption in shearing Surface wave Rayleigh wave-shear wave coupling

Influence of vibration on the lubrication effect of a splash-lubricated gearbox

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Journal of Zhejiang university-Science A(Applied Physics & Engineering) 2024年第4期25卷 324-339页

作者： Yi LIU Kailin ZHANG Shuai SHAO Hongxu XIANG Zhijian YE state Key Laboratory of Rail Transit Vehicle System Southwest Jiaotong UniversityChengdu 610031China

In this study,we investigate the effect of rail vibrations on the lubrication and efficiency of a splash-lubricated gearbox;specifically,the gearbox of a rail-transit vehicle.A high-fidelity 3D numerical model of the gearbox in a moving reference system is described,as well as computational fluid dynamics(CFD)simulations of the gearbox with different vibration *** effects of rotational speed,oil-immersion depth,and different oil-injection volume rates on lubrication and efficiency are *** propose a method of evaluating the internal lubrication condition of a splash-lubricated gearbox and quantitatively compare the effects of different operating parameters on lubrication and ***,our experiment to verify the feasibility of the simulation method is *** results show that with vibration,the churning loss and oil supply for the bearings are significantly higher than those under static *** addition,among different vibrational directions,lateral vibration has the greatest influence on the lubrication condition and efficiency of the *** the studied railway-vehicle gearbox,the best lubrication condition is achieved at a rotational speed of 1600 r/min and an oil-immersion depth of two times the tooth height(***).Rotational speed is the operating parameter that has the most significant effect on the lubrication and efficiencyofthegearbox.

关键词： Comprehensive lubrication evaluation Churning loss Moving reference system Splash lubrication Vibrational excitation Gearbox

Synergistic effect of homojunction and Ohmic junctions in CdS boosting spatial charge separation for U(VI)photoreduction

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Nano Research 2024年第8期17卷 6849-6859页

作者： Haonan Pei Zhimin Dong Zifan Li Jian Huang Yuanping Jiang Zuojia Li Lin Xu Xiaohong Cao Yunhai Liu Zhibin Zhang Guoping Yang state Key Laboratory of Nuclear Resources and Environment East China University of TechnologyNanchang 330013China

Photo-excited holes usually migrate to the surface of the catalyst and rapidly recombine with electrons,reducing the photocatalytic reduction efficiency of uranium(VI)(U(VI))in radioactive ***,we employed a straightforward synthesis technique to meticulously shape and manipulate the morphology of CdS to precisely construct CdS-Ni dandelion-like composites with different aspect ***,the introduction of crystal facet homojunction with Ohmic contacts in this unique morphology siqnificantly improves the photocatalytic ***-dependent photoluminescence spectroscopy(TD-PL)verifies that the composite material positively effects on the dissociation of *** 30 min,CdS(002)/(102)/Ni-4 removed 98% of the uranium content in solution and showed a rather high apparent rate constant(0.114 min^(−1)),which was 4.8 times higher than that of CdS nanospheres(NSs)(0.024 min^(−1))and 3.7 times higher than that of CdS nanorods(NRs)(0.031 min^(−1)).This is much higher the most reported photocatalysts for U(VI)*** after 5 consecutive cycles,the photocatalytic efficiency only decreased by 7%.This offers a fresh perspective on constructing a new perspective for building a green,efficient,and multi mechanism collaborative catalytic system to remediate environmental pollution.

关键词： uranium dandelion-shaped axial size effect crystal facet homojunction ohmic contact

Sourcing the merits of 3D integrated air cathodes for highperformance Zn-air batteries by bubble pump consumption chronoamperometry

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Nano Research 2024年第8期17卷 6951-6959页

作者： Mengxuan Li Linfeng Yu Hai Liu Chuanyi Zhang Jiazhan Li Liang Luo Xiaoming Sun state Key Laboratory of Chemical Resource Engineering Beijing University of Chemical TechnologyBeijing 100029China

Zn-air batteries(ZABs)as a potential energy conversion system suffer from low power density(typically≤200 mW·cm^(−2)).Recently,three-dimensional(3D)integrated air cathodes have demonstrated promising performance over traditional twodimensional(2D)plane ones,which is ascribed to enriched active sites and enhanced diffusion,but without experimental ***,we applied a bubble pump consumption chronoamperometry(BPCC)method to quantitatively identify the gas diffusion coefficient(D)and effective catalytic sites density(ρEC)of the integrated air cathodes for ***,the D andρEC values can instruct consequent optimization on the growth of Co embedded N-doped carbon nanotubes(CoNCNTs)on carbon fiber paper(CFP)and aerophilicity tuning,giving 4 times D and 1.3 timesρEC over the conventional 2D Pt/C-CFP *** a result,using the CoNCNTs with half-wave potential of merely 0.78 V ***(Pt/C:0.89 V ***),the superaerophilic CoNCNTs-CFP cathode-based ZABs exhibited a superior peak power density of 245 mW·cm^(−2) over traditional 2D Pt/C-CFP counterparts,breaking the threshold of 200 mW·cm^(−2).This work reveals the intrinsic feature of the 3D integrated air cathodes by yielding exact D andρEC values,and demonstrates the feasibility of BPCC method for the optimization of integrated electrodes,bypassing trial-and-error strategy.

关键词： Zn-air batteries three-dimensional(3D)integrated air cathodes superaerophilic gas diffusion coefficient effective catalytic sites density

Effects of physical properties of supercritical water on heat transfer characteristics of single particle within a particle cluster Author links open overlay panel

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Particuology 2024年第8期91卷 291-302页

作者： Xiaoyu Li Bowei Zhang Huibo Wang Hui Jin state Key Laboratory of Multiphase Flow in Power Engineering Xi'an Jiaotong UniversityXi'an710049China

The complex physical properties of supercritical water(SCW)make the heat transfer characteristics of particles within a particle cluster *** heat transfer characteristics of single particle within a particle cluster in SCW,influenced by surrounding particles,have not been effectively *** numerical simulations were conducted to investigate the heat transfer characteristics of particle clusters in SCW under different *** results were compared and analyzed with those from constant property *** was found that Reynolds number(Re)and the void fraction of particle cluster have no special effects on the variation trends of Nusselt number(Nu)for the focused ***,the particle temperature had a significant effect on the variation trends of *** effect of Re on the heat transfer rate exponent(η)of the focused particle can be divided into two zones:a significant effect zone and a non-significant effect *** effect of void fraction onηin the non-significant effect zone was *** the non-significant effect zone,ηdecreased with the increasing particle *** the significant effect zone,the variation trends ofηbecame more *** fundamental reason for this series of phenomena is the changes in distribution of physical properties.A model forηwas developed for the non-significant effect *** model can filter out the effects of Re and certain particle cluster spatial configurations,and it demonstrates good predictive performance.

关键词： Supercritical water Particle cluster Heat transfer characteristics Heat transfer rate exponent Physical properties correction

Branch-Chain-Rich Diisopropyl Ether with Steric Hindrance Facilitates Stable Cycling of Lithium Batteries at-20℃

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Nano-Micro Letters 2024年第10期16卷 121-135页

作者： Houzhen Li Yongchao Kang Wangran Wei Chuncheng Yan Xinrui Ma Hao Chen Yuanhua Sang Hong Liu Shuhua Wang state Key Laboratory of Crystal Materials Shandong UniversityJinan 250100People's Republic of China

Li metal batteries(LMBs)offer signifi-cant potential as high energy density alternatives;nev-ertheless,their performance is hindered by the slow desolvation process of electrolytes,particularly at low temperatures(LT),leading to low coulombic efficiency and limited cycle ***,it is essential to opti-mize the solvation structure thereby achieving a rapid desolvation process in LMBs at ***,we introduce branch chain-rich diisopropyl ether(DIPE)into a 2.5 M Li bis(fluorosulfonyl)imide dipropyl ether(DPE)elec-trolyte as a co-solvent for high-performance LMBs at-20℃.The incorporation of DIPE not only enhances the disorder within the electrolyte,but also induces a steric hindrance effect form DIPE’s branch chain,excluding other solvent molecules from Li+solvation *** of these factors contribute to the weak interactions between Li^(+)and solvent molecules,effectively reducing the desolvation energy of the ***,Li(50μm)||LFP(mass loading~10 mg cm^(-2))cells in DPE/DIPE based electrolyte demonstrate stable performance over 650 cycles at-20℃,delivering 87.2 mAh g^(-1),and over 255 cycles at 25℃ with 124.8 mAh g^(-1).DIPE broadens the electrolyte design from molecular structure considera-tions,offering a promising avenue for highly stable LMBs at LT.

关键词： Solvation structure Li metal battery Low temperature Steric hindrance Disorder