检索结果-南通市图书馆

Journal of Zhejiang University-Science A(Applied Physics & Engineering) 2024年第4期25卷 292-310页

作者： Rendi KURNIAWAN Moran XU Min Ki CHOO Shuo CHEN Yein KWAK' Jielin CHEN Saood ALI Hanwei TENG Pil Wan HAN Gi Soo KIM Tae Jo KO Precision Machining Laboratory Department of Mechanical Engineering Yeungnam UniversityGyeongsansiGyeongbuk-doRepublic of Korea korea electrotechnology research institute(KERI) ChangwonsiGyeongsangnam-doRepublic of Korea KASWIN Co. LtdChangwon-siGyeongsangnamdoRepublic of Korea

This study presents the development of an ultrasonic transducer with a radius horn for an ultrasonic milling spindle(UMS)*** ultrasonic transducer was intended to have a working frequency of approximately 30 *** different materials were considered in the study:stainless steel(SS 316L)and titanium alloy(Ti-6Al-4V).Titanium alloy gave a higher resonance frequency(33 kHz)than stainless steel(30 kHz)under the same preload compression *** electromechanical impedance simulation was carried out to predict the impedance resonance frequency for both materials,and the effect of the overhanging toolbar was *** to the electromechanical impedance simulation,the overhanging toolbar length affected the resonance frequency,and the error was less than 3%.Harmonic analysis confirmed that the damping ratio helps determine the resonance ***,damping ratios of 0.015-0.020 and 0.005-0.020 were selected for stainless steel and titanium alloy,respectively,with an error of less than 1.5%.Experimental machining was also performed to assess the feasibility of ultrasonic-assisted milling;the result was a lesser cutting force and better surface topography of Al 6061.

关键词： Ultrasonic spindle Ultrasonic vibration assisted-milling(UVAM) 1-degree of freedom(DOF) Frequency Amplitude Milling

Transparent high-performance piezoceramics through pressureless sintering

在线全文

学校读者我要写书评

暂无评论

Journal of Advanced Ceramics 2024年第5期13卷 561-567页

作者： Hye-Lim Yu Woo-Seok Kang Ju-Hyeon Lee Temesgen Tadeyos Zate Young-Jin Lee Bo-Kun Koo Dong-Jin Shin Min-Soo Kim Soon-Jong Jeong Young Ghyu Ahn Wook Jo Department of Material Science and Engineering Ulsan National Institute of Science and TechnologyUlsan 44919Republic of Korea Energy Conversion research Center Korea Electrotechnology Research InstituteChangwon 51543Republic of Korea MLCC Development Team Component Biz.UnitSamsung Electro-Mechanics Co.Ltd.Suwon 16674Republic of Korea

Piezoelectricity offers an electromechanical coupling that is widely utilized in transducer *** has been a consistent demand for transparent piezoelectric materials for optoelectrical ***,despite the inherent tradeoff between the transparency and the piezoelectricity,numerous strategies have been explored to develop the transparent piezoelectric ***,the most transparent piezoelectric materials developed to date is either a single crystal or materials that achieve transparency via hot-press sintering,limiting its industrial ***,we introduce a novel piezoelectric material that ensures transparency through co-doping and pressureless sintering of polycrystalline *** this study,we employed a compositional optimization approach to enhance the synergistic effect between the transparency and the piezoelectric properties of 0.71Pb(Mg_(1/3)Nb_(2/3))O_(3)–0.29PbTiO_(3)(PMN–0.29PT)*** utilizing the tape casting process for mass production and large-area manufacturing,our Pb_(0.913)La_(0.0145)Sm_(0.0145)(Mg_(1/3)Nb_(2/3))_(0.71)Ti_(0.29)O_(3)(TP2.9)ceramics exhibited over 60%transparency and large piezoelectric coefficient(d33)of 1104 pC/*** material holds considerable promise for a wide range of industrial applications in both the optical and electronic domains.

关键词： piezoelectric ceramics transparency pressureless sintering co-doping tape casting

Defect Engineering in Earth-Abundant Cu2ZnSnSe4 Absorber Using Efficient Alkali Doping for Flexible and Tandem Solar Cell Applications

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Energy & Environmental Materials 2024年第2期7卷 253-260页

作者： Muhammad Rehan Ara Cho Inyoung Jeong Kihwan Kim Asmat Ullah Jun-Sik Cho Joo Hyung Park Yunae Jo Sung Jun Hong Seung Kyu Ahn SeJin Ahn Jae Ho Yun Jihye Gwak Donghyeop Shin Photovoltaics research Department Korea Institute of Energy Research (KIER) Department of Renewable Energy Engineering University of Science and Technology (UST) korea institute of Energy Technology (KENTECH)

To demonstrate flexible and tandem device applications, a low-temperature Cu2ZnSnSe4（CZTSe） deposition process, combined with efficient alkali doping, was developed. First, high-quality CZTSe films were grown at480 °C by a single co-evaporation, which is applicable to polyimide（PI）substrate. Because of the alkali-free substrate, Na and K alkali doping were systematically studied and optimized to precisely control the alkali distribution in CZTSe. The bulk defect density was significantly reduced by suppression of deep acceptor states after the（Na F + KF） PDTs. Through the low-temperature deposition with（Na F + KF） PDTs, the CZTSe device on glass yields the best efficiency of 8.1% with an improved VOCdeficit of646 m V. The developed deposition technologies have been applied to *** the first time, we report the highest efficiency of 6.92% for flexible CZTSe solar cells on PI. Additionally, CZTSe devices were utilized as bottom cells to fabricate four-terminal CZTSe/perovskite tandem cells because of a low bandgap of CZTSe（～1.0 e V） so that the tandem cell yielded an efficiency of 20%. The obtained results show that CZTSe solar cells prepared by a low-temperature process with in-situ alkali doping can be utilized for flexible thin-film solar cells as well as tandem device applications.

关键词： alkali doping Earth-abundant Cu2ZnSnSe4 flexible solar cells four-terminal tandem cells low-temperature process

KoNA:korean Nucleotide Archive as A New Data Repository for Nucleotide Sequence Data

在线全文

学校读者我要写书评

暂无评论

Genomics, Proteomics & Bioinformatics 2024年第1期22卷 161-167页

作者： Gunhwan Ko Jae Ho Lee Young Mi Sim Wangho Song Byung-Ha Yoon Iksu Byeon Bang Hyuck Lee Sang-Ok Kim Jinhyuk Choi Insoo Jang Hyerin Kim Jin Ok Yang Kiwon Jang Sora Kim Jong-Hwan Kim Jongbum Jeon Jaeeun Jung Seungwoo Hwang Ji-Hwan Park Pan-Gyu Kim Seon-Young Kim Byungwook Lee korea Bioinformation Center Korea Research Institute of Bioscience&BiotechnologyDaejeon 34141Republic of Korea

During the last decade,the generation and accumulation of petabase-scale high-throughput sequencing data have resulted in great challenges,including access to human data,as well as transfer,storage,and sharing of enormous amounts of *** promote data-driven biological research,the korean government announced that all biological data generated from government-funded research projects should be deposited at the korea BioData Station(K-BDS),which consists of multiple databases for individual data ***,we introduce the korean Nucleotide Archive(KoNA),a repository of nucleotide sequence *** of July 2022,the korean Read Archive in KoNA has collected over 477 TB of raw next-generation sequencing data from national genome *** ensure data quality and prepare for international alignment,a standard operating procedure was adopted,which is similar to that of the International Nucleotide Sequence Database *** standard operating procedure includes quality control processes for submitted data and metadata using an automated pipeline,followed by manual *** ensure fast and stable data transfer,a high-speed transmission system called GBox is used in ***,the data uploaded to or downloaded from KoNA through GBox can be readily processed using a cloud computing service called *** seamless coupling of KoNA,GBox,and Bio-Express enhances the data experience,including submission,access,and analysis of raw nucleotide *** not only satisfies the unmet needs for a national sequence repository in korea but also provides datasets to researchers globally and contributes to advances in *** KoNA is available at https://***/kona/.

关键词： korea BioData Station Nucleotide sequence Next-generation sequencing repository Genomics Deposition and access of big data

Long cycle-life aqueous Zn battery enabled by facile carbon nanotube coating on Cu current collector

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Carbon Energy 2024年第6期6卷 151-164页

作者： Beom-Keun Cho Sung-Ho Huh So Hee Kim Seungho Yu Jong-Seong Bae Jung-Keun Yoo Seung-Ho Yu Department of Chemical and Biological Engineering Korea UniversitySeoulRepublic of Korea Advanced Analysis Center Korea Institute of Science and Technology(KIST)SeoulRepublic of Korea Energy Storage research Center Korea Institute of Science and Technology(KIST)SeoulRepublic of Korea KIST School Division of Energy and Environment TechnologyKorea University of Science and TechnologySeoulRepublic of Korea Busan Center Korea Basic Science Institute(KBSI)BusanRepublic of Korea Carbon Composites Department Composites Research DivisionKorea Institute of Materials Science(KIMS)ChangwonRepublic of Korea

As an alternative to Li-ion batteries,aqueous Zn batteries have gained attention due to the abundance of Zn metal,low reduction potential(-0.76 V *** hydrogen electrode),and high theoretical capacity(820 mAh g^(-1))of multivalent Zn2+***,the growth of Zn dendrites and the formation of irreversible surface reaction byproducts pose challenges for ensuring a long battery lifespan and ***,the Cu foil coated with a single-walled carbon nanotube(SWCNT)layer using a facile doctor blade casting method is *** SWCNT-coated Cu foil demonstrates a significantly longer battery lifespan compared to the bare Cu in the half-cell *** operando optical microscopy imaging,we are able to provide intuitive evidence that Zn deposition occurs between the carbon nanotube(CNT)coating and Cu substrate,in agreement with the computational ***,with various imaging techniques,the flat morphology and homogeneous distribution of Zn beneath the SWCNT layer are *** addition,the full-cell using CNT-coated Cu exhibits a long cycle life compared to the control group,thereby demonstrating improved electrochemical performance with limited Zn for the cycling process.

关键词： aqueous Zn battery carbon nanotube operando imaging surface coating

Oxygen vacancy engineering for tuning the catalytic activity of LaCoO_(3) perovskite

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Journal of Rare Earths 2024年第3期42卷 506-514,I0003页

作者： Jeong Hyun Cho Minjae Kim Inchan Yang Kyung Tae Park Chang Houn Rhee Hai Woong Park Ji Chul Jung Department of Chemical Engineering Myongji UniversityYongin 17058Republic of Korea institute of Advanced Composite Materials Korea Institute of Science and TechnologyWanju-gunJeollabuk-do 55324Republic of Korea Iron&Steel Process Engineering research Group POSCOPohang 37859Republic of Korea Hydrogen research Center Research Institute of Industrial Science&Technology(RIST)Pohang 37673Republic of Korea

Herein, we attempted to engineer oxygen vacancies on the surface of LaCoO_(3) perovskite through simple post-treatments(acid or reductive thermal treatments). Acid treatment induces oxygen vacancies through the selective etching of the La cations, whereas thermal treatment in a reducing atmosphere generates oxygen vacancies by directly removing lattice oxygen. The characterization results confirm that the number of surface oxygen vacancies, which are crucial in various catalytic oxidation reactions,considerably increases in the LaCoO_(3) catalysts treated with acid or reducing gas. Acid treatment enriches the oxygen vacancies while maintaining the structure of the LaCoO_(3) catalysts, which can not be achieved through reductive thermal treatment. Therefore, the acid treatment is considered a promising technique for oxygen vacancy engineering of perovskite catalysts for tuning their catalytic activities. Furthermore,the catalytic activities of the posttreated LaCoO_(3) catalysts for CO oxidation were evaluated and are noted to be considerably better than those of the pristine LaCoO_(3) catalyst due to their abundant oxygen vacancies. Consequently, we conclude that the oxygen vacancies of perovskite catalysts can be effectively engineered via two simple methods and play a significant role in CO oxidation.

关键词： LaCoO_(3)perovskite Acid treatment Reductive thermal treatment Oxygen vacancy CO oxidation Rare earths

Boosted Lithium-Ion Transport Kinetics in n-Type Siloxene Anodes Enabled by Selective Nucleophilic Substitution of Phosphorus

在线全文

学校读者我要写书评

暂无评论

Nano-Micro Letters 2024年第10期16卷 618-637页

作者： Se In Kim Woong-Ju Kim Jin Gu Kang Dong-Wan Kim School of Civil Environmental and Architectural EngineeringKorea University02841 SeoulSouth Korea Nanophotonics research Center Korea Institute of Science and Technology02792 SeoulSouth Korea

Doped two-dimensional(2D)materials hold significant promise for advancing many technologies,such as microelectronics,optoelectronics,and energy ***,n-type 2D oxidized Si nanosheets,namely n-type siloxene(n-SX),are employed as Li-ion battery *** thermal evaporation of sodium hypophosphite at 275℃,P atoms are effectively incorporated into siloxene(SX)without compromising its 2D layered morphology and unique Kautsky-type crystal ***,selective nucleophilic substitution occurs,with only Si atoms being replaced by P atoms in the O_(3)≡Si-H *** resulting n-SX possesses two delocalized electrons arising from the presence of two electron donor types:(i)P atoms residing in Si sites and(ii)H *** doping concentrations are varied by controlling the amount of precursors or their mean free *** at 2000 mA g^(-1),the n-SX electrode with the optimized doping concentration(6.7×10^(19) atoms cm^(-3))delivers a capacity of 594 mAh g^(-1) with a 73%capacity retention after 500 *** improvements originate from the enhanced kinetics of charge transport processes,including electronic conduction,charge transfer,and solid-state *** approach proposed herein offers an unprecedented route for engineering SX anodes to boost Li-ion storage.

关键词： Li-ion battery Two-dimensional N-type siloxene Doping mechanism Kinetics

Protein Arginine Methyltransferase 1 Ablation in Motor Neurons Causes Mitochondrial Dysfunction Leading to Age-related Motor Neuron Degeneration with Muscle Loss

在线全文

学校读者我要写书评

暂无评论

research 2024年第1期2023卷 637-649页

作者： Hyun-Kyung So Hyebeen Kim Jinwoo Lee Chang-Lim You Chae-Eun Yun Hyeon-Ju Jeong Eun-Ju Jin Yunju Jo Dongryeol Ryu Gyu-Un Bae Jong-Sun Kang Department of Molecular Cell Biology Sungkyunkwan University School of MedicineSuwonKorea Single Cell Network research Center Sungkyunkwan University School of MedicineSuwonKorea research institute of Aging-Related Diseases AniMusCureInc.SuwonKorea Drug Information research institute Muscle Physiome Research CenterCollege of PharmacySookmyung Women’s UniversitySeoulKorea

Neuromuscular dysfunction is tightly associated with muscle wasting that occurs with age or due to degenerative ***,the molecular mechanisms underlying neuromuscular dysfunction are currently *** studies have proposed important roles of Protein arginine methyltransferase 1(Prmt1)in muscle stem cell function and muscle *** the current study,we set out to determine the role of Prmt1 in neuromuscular function by generating mice with motor neuron-specific ablation of Prmt1(mnKO)using *** exhibited age-related motor neuron degeneration and neuromuscular dysfunction leading to premature muscle loss and ***1 deficiency also impaired motor function recovery and muscle reinnervation after sciatic nerve *** transcriptome analysis of aged mnKO lumbar spinal cords revealed alterations in genes related to inflammation,cell death,oxidative stress,and ***,mnKO lumbar spinal cords of sciatic nerve injury model or aged mice exhibited elevated cellular stress response in motor ***,Prmt1 inhibition in motor neurons elicited mitochondrial *** findings demonstrate that Prmt1 ablation in motor neurons causes agerelated motor neuron degeneration attributing to muscle ***,Prmt1 is a potential target for the prevention or intervention of sarcopenia and neuromuscular dysfunction related to aging.

关键词： degeneration impaired prevention

Stable operation of highly loaded pure Si-Fe anode under ambient pressure via carboxy silane-directed robust solid electrolyte interphase

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Journal of Energy Chemistry 2024年第7期94卷 568-576页

作者： Guntae Lim Dong Guk Kang Hyeon Gyu Lee Yen Hai Thi Tran Kihun An Junghyun Choi Kwang Chul Roh Do Youb Kim Seung-Wan Song Department of Chemical Engineering&Applied Chemistry Chungnam National University Daejeon 34134Republic of Korea Energy Storage Materials Center Korea Institute of Ceramic Engineering&TechnologyJinju 52851Republic of Korea Advanced Energy Materials research Center Korea Research Institute of Chemical TechnologyDaejeon 34114Republic of Korea

Incorporation of higher content Si anode material beyond 5 wt% to Li-ion batteries(LIBs)is challenging,owing to large volume change,swelling,and solid electrolyte interphase(SEI)instability ***,a strategy of diacetoxydimethylsilane(DAMS)additive-directed SEI stabilization is proposed for a stable operation of Si-0.33FeSi_(2)(named as Si-Fe)anode without graphite,which provides siloxane inorganics and organics enrichment that compensate insufficient passivation of fluoroethylene carbonate(FEC)additive and reduce a dependence on *** stable cycling performance of highly loaded(3.5 mA h cm^(-2))pure Si-Fe anode is achieved with 2 wt%DAMS combined with 9 wt%FEC additives under ambient pressure,yielding high capacity 1270 mA h g^(-1)at 0.5 C and significantly improved capacity retention of 81% after 100 cycles,whereas short circuit and rapid capacity fade occur with FEC only ***-directed robust SEI layer dramatically suppresses swelling and particles crossover through separator,and therefore prevents short circuit,demonstrating a possible operation of pure Si or Sidominant anodes in the next-generation high-energy-density and safe LIBs.

关键词： High-energy Li-ion battery Pure Si-Fe anode without graphite Silane additive SEI layer Suppressed swelling

YOLO-Based Damage Detection with StyleGAN3 Data Augmentation for Parcel Information-Recognition System

在线全文

学校读者我要写书评

暂无评论

Computers, Materials & Continua 2024年第7期80卷 195-215页

作者： Seolhee Kim Sang-Duck Lee Department of Electrical and Computer Engineering Sungkyunkwan UniversitySuwon16419Republic of Korea Logistics System research Division Korea Railroad Research InstituteUiwang16105Republic of Korea

Damage to parcels reduces customer satisfactionwith delivery services and increases return-logistics *** can be prevented by detecting and addressing the damage before the parcels reach the ***,various studies have been conducted on deep learning techniques related to the detection of parcel *** study proposes a deep learning-based damage detectionmethod for various types of *** is intended to be part of a parcel information-recognition systemthat identifies the volume and shipping information of parcels,and determines whether they are damaged;this method is intended for use in the actual parcel-transportation *** this purpose,1)the study acquired image data in an environment simulating the actual parcel-transportation process,and 2)the training dataset was expanded based on StyleGAN3 with adaptive discriminator ***,3)a preliminary distinction was made between the appearance of parcels and their damage status to enhance the performance of the parcel damage detection model and analyze the causes of parcel ***,using the dataset constructed based on the proposed method,a damage type detection model was trained,and its mean average precision was *** model can improve customer satisfaction and reduce return costs for parcel delivery companies.

关键词： Parcel delivery service damage detection damage classification data augmentation generative adversarial network