检索结果-南通市图书馆

Deformation and stability of the seawall,considering the strength uncertainty of cement mixing piles

Journal of zhejiang University-Science A(Applied Physics & Engineering) 2024年第6期25卷 483-501页

作者： Yuansheng YU Lingling LI Xiangmiao KONG Chengyuan LI Zhen GUO key laboratory of offshore geotechnics and material of zhejiang province College of Civil Engineering and ArchitectureZhejiang UniversityHangzhou310058China Hainan Institute Zhejiang UniversitySanya572000China Ninghai Highway and Transportation Management Center Ningbo315600China Ninghai Traffic Engineering Construction Management Institute Ningbo315600China

The cement mixing (CM) pile is a common method of improving soft offshore ground. The strength growth of CM piles under complex conditions is affected by many factors, especially the cement and moisture contents, and shows significant uncertainty. To investigate the stochasticity of the early strength of CM piles and its impact on the displacement and stability of a seawall, a series of laboratory tests and numerical analyses were carried out in this study. Vane shear tests were conducted on the cement-solidified soil to determine the relationships between the undrained shear strength s_(u) of the cement soil curing in the seawater and the cement content a_(c), as well as the in situ soil moisture content w. It can be inferred that the 24 h undrained shear strength follows a normal distribution. A numerical model considering the random CM pile strength was established to investigate the deformation of the seawall. Due to the uncertainty of CM pile strength, the displacement of the seawall demonstrates a certain discreteness. The decrease of the mean undrained shear strength of CM piles causes a corresponding increase in the average displacement of the seawall. When the mean strength of CM piles is lower than a certain threshold, there is a risk of instability. Furthermore, the heterogeneity of the strength within an individual CM pile also has an impact on seawall displacement. Attention should be paid to the uncertainty of CM pile strength to control displacement and stability.

关键词： Construction uncertainty Cement mixing(CM)pile Strength of cement soil Seawall stability Random finite element method(RFEM) Monte Carlo simulation(MCS)

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Seabed structures and foundations related to deep-sea resource development:A review based on design and research

引用

Deep Underground Science and Engineering 2024年第2期3卷 131-148页

作者： Shengjie Rui Haojie Zhang Hang Xu Xing Zha Mengtao Xu Kanmin Shen key laboratory of offshore geotechnics and material of zhejiang province College of Civil Engineering and ArchitectureZhejiang UniversityHangzhouChina Advanced Modelling Offshore EnergyNorwegian Geotechnical InstituteOsloNorway Geotechnical Technology Center(Overseas Engineering Center) PowerChina Huadong Engineering Corporation LimitedHangzhouChina

The deep‐sea ground contains a huge amount of energy and mineral resources,for example,oil,gas,and *** infrastructures such as floating structures,seabed structures,and foundations have been developed to exploit these *** seabed structures and foundations can be mainly classified into three types:subsea production structures,offshore pipelines,and *** study reviewed the development,installation,and operation of these infrastructures,including their structures,design,installation,marine environment loads,and *** this basis,the research gaps and further research directions were explored through this literature ***,different floating structures were briefly analyzed and reviewed to introduce the design requirements of the seabed structures and ***,the subsea production structures,including subsea manifolds and their foundations,were reviewed and ***,the basic characteristics and design methods of deep‐sea pipelines,including subsea pipelines and risers,were analyzed and ***,the installation and bearing capacity of deep‐sea subsea anchors and seabed trench influence on the anchor were *** the review,it was found that marine environment conditions are the key inputs for any offshore structure *** fabrication,installation,and operation of infrastructures should carefully consider the marine loads and geological *** structures have their own mechanical *** fatigue and stability of pipelines mainly depend on the soil‐structure *** selection should consider soil types and possible trench *** focuses and research gaps can provide a helpful guide on further research,installation,and operation of deep‐sea structures and foundations.

关键词： anchors floating structures pipelines risers subsea foundations

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

PDGFR in PDGF-BB/PDGFR Signaling Pathway Does Orchestrates Osteogenesis ina Temporal Manner

引用

Research 2024年第1期2023卷 33-48页

作者： Fangqian Wang Yuxiao Ye Zengjie Zhang Wangsiyuan Teng Hangxiang Sun Xupeng Chai Xingzhi Zhou Jiayu Chen Haochen Mou Yinwang Eloy Xiaoqiang Jin Liang Chen Zhenxuan Shao Yan Wu Yue Shen An Liu Peng Lin Jianwei Wang Xiaohua Yu Zhaoming Ye Department of Orthopedic Surgery the Second Affiliated HospitalZhejang University School of MedicineHangzhou CityZhejiang ProvincePR China Orthopedics Research Institute of Zhejang University Hangzhou CityZhejiang ProvincePR China key laboratory of Motor System Disease Research and Precision Therapy of zhejiang province Hangzhou CityZhejiang ProvincePR China School of material Science and Engineering University of New South WalesSydney 2052Australia

Platelet-derived growth factor-BB(PDGF-BB)/platelet-derived growth factor receptor-β(PDGFR-β)pathway is conventionally considered as an important pathway to promote osteogenesis;however,recent study suggested its role during osteogenesis to be *** the differential functions of this pathway during 3 stages of bone healing,we hypothesized that temporal inhibition of PDGF-BB/PDGFR-βpathway could shift the proliferation/differentiation balance of skeletal stem and progenitor cells,toward osteogenic lineage,which leads to improved bone *** first validated that inhibition of PDGFR-βat late stage of osteogenic induction effectively enhanced differentiation toward *** effect was also replicated invivo by showing accelerated bone formation when block PDGFR-βpathway at late stage of critical bone defect healing mediated using ***,we found that such PDGFR-βinhibitor-initiated bone healing was also effective in the absence of scaffold implantation when administrated ***,timely inhibition of PDGFR-βblocked extracellular regulated protein kinase 1/2 pathway,which shift proliferation/differentiation balance of skeletal stem and progenitor cell to osteogenic lineage by upregulating osteogenesis-related products of Smad to induce *** study offered updated understanding of the use of PDGFR-βpathway and provides new insight routes of action and novel therapeutic methods in the field of bone repair.

关键词： healing sized implantation

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Accelerating solar driven CO_(2) reduction via sulfur-doping boosted water dissociation and proton transfer

引用

Nano Research 2024年第3期17卷 1056-1065页

作者： Ke Yan Liang Chen Yangguang Hu Ting Wang Cong Chen Chao Gao Youju Huang Benxia Li School of Chemistry and Chemical Engineering Key Laboratory of Surface&Interface Science of Polymer Materials of Zhejiang ProvinceZhejiang Sci-Tech UniversityHangzhou 310018China College of material Chemistry and Chemical EngineeringKey Laboratory of Organosilicon Chemistry and Material TechnologyMinistry of EducationHangzhou Normal UniversityHangzhou 311121China School of Chemistry and materials Science University of Science and Technology of ChinaHefei 230026China

Exploring efficient photocatalysts for solar driven CO_(2) reduction with water(H_(2)O)as a proton donor is highly imperative but remains a great challenge because the synchronous enhancement of CO_(2) activation,H_(2)O dissociation and proton transfer is hardly achieved on a ***,the sluggish H_(2)O dissociation impedes the photocatalytic CO_(2) reduction reaction involving multiple proton–electron coupling transfer ***,a sulfur-doped BiOCl(S-BiOCl)photocatalyst with abundant oxygen vacancies(OV)is developed,which exhibits broadband-light harvesting across solar spectrum and distinct photothermal effect due to *** photocatalytic CO_(2) reduction with H_(2)O in a gas–solid system,the high CO yield of 49.76μmol·g_(cat)^(-1)·h^(-1) with 100%selectivity is achieved over the S-BiOCl catalyst under a simulated *** H_(2)O-assisted CO_(2) reduction reaction on S-BiOCl catalyst is triggered by photocatalysis and the photothermal heating further enhances the reaction *** kinetic isotope experiments indicate that the sluggish H_(2)O dissociation affects the whole photocatalytic CO_(2) reduction *** presence of oxygen vacancies promotes the adsorption and activation of H_(2)O and CO_(2),and the doped S sites play a crucial role in boosting H_(2)O dissociation and accelerating the dynamic migration of hydrogen *** a result,the ingenious integration of OV defects,S sites and photothermal effect in S-BiOCl catalyst conjointly contributes to the significant improvement in photocatalytic CO_(2) reduction performance.

关键词： BiOCl sulfur doping photocatalytic CO_(2)reduction H_(2)O activation proton feeding

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

GPa-level pressure-induced enhanced corrosion resistance in TiZrTaNbSn biomedical high-entropy alloy

引用

China Foundry 2024年第3期21卷 265-275页

作者： Xiao-hong Wang Yu-lei Deng Qiao-yu Li Zhi-xin Xu Teng-fei Ma Xing Yang Duo Dong Dong-dong Zhu Xiao-hong Yang key laboratory of Air-driven Equipment Technology of zhejiang province Quzhou UniversityQuzhou 324000ZhejiangChina School of materials Science and Engineering Taizhou UniversityTaizhou 318000ZhejiangChina

TiZrTaNb-based high-entropy alloys(HEAs)are research frontier of biomedical materials due to their high hardness,good yield strength,excellent wear resistance and corrosion ***,as an essential trace element in the human body that plays a significant role in physiological *** has stable chemical properties and a low elastic *** this study,a new material,TiZrTaNbSn HEAs,was proposed as a potential biomedical *** Ti_(35)Zr_(25)Ta_(15)Nb_(15)Sn_(10)biomedical high-entropy alloys(BHEAs)were successfully prepared through an arc melting furnace and then remelted using a German high-temperature and high-pressure apparatus under GPa-level(4 GPa and 7 GPa).The precipitation behavior of the needle-like HCP-Zr_(5)Sn_(3)phase that precipitates discontinuously at the grain boundary was successfully *** phase constitution,microstructure,and corrosion resistance of the alloy were *** results show that the needle-like HCP-Zr_(5)Sn_(3)phase is eliminated and the(Zr,Sn)-rich nano-precipitated phase is precipitated in the microstructure under high pressure,which leads to the narrowing of grain boundaries and consequently improves the corrosion resistance of the *** addition,the formation mechanisms of(Zr,Sn)-rich nanoprecipitates in BHEAs were *** Zr and Sn dissolve in the matrix due to the effect of high pressure,during the cooling process,they precipitate to form a(Zr,Sn)-rich nano-precipitated phase.

关键词： biomedical HEAs precipitation grain boundary corrosion resistance TiZrTaNbSn

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Shared mooring systems for offshore floating wind farms: A review

引用

Energy Reviews 2024年第1期3卷 76-89页

作者： Hang Xu Shengjie Rui Kanmin Shen Liangliang Jiang Haojie Zhang Long Teng zhejiang key laboratory of offshore geotechnics and material College of Civil Engineering and ArchitectureZhejiang UniversityHangzhou310058China Norwegian Geotechnical Institute Sandakerveien 140Oslo0484Norway PowerChina Huadong Engineering Corporation Limited Hangzhou311122China Department of Chemical and Petroleum Engineering The University of CalgaryCalgaryAlbertaCanada

offshore wind energy,as a form of renewable power,has seen rapid development in recent *** fixedbottom wind turbines are typically used in water depths less than 50 m,the utilization of floating offshore wind turbines(FOWTs)becomes essential for deeper *** and effective mooring systems play a crucial role in making FOWTs commercially *** concept of a shared mooring system offers an innovative solution for deploying floating wind farms in clusters or arrays,which can reduce overall construction costs for large-scale floating wind *** is imperative to optimize the shared mooring arrangement for maximum cost-effectiveness and wind farm ***,implementing a shared mooring system introduces complexity to the dynamics of FOWTs,requiring the development of advanced simulation tools to meet modelling *** the shared mooring arrangement,mooring lines and anchors face more significant challenges,such as chain-seabed interactions,soil cyclic weakening,and anchor out-of-plane loading,which underscore the need for innovative,reliable,and efficient shared anchor *** article offers an overview of the current research status on shared mooring systems for floating wind farms,which might serve as a valuable reference for the construction of large-scale floating wind farms worldwide.

关键词： Floating offshore wind turbines Wind farm Shared mooring Shared anchor Renewable energy

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Deep insight of unique phase transition behaviors and mechanism in Zr_(2)Co-H isotope system with ultra-low equilibrium pressure

引用

Rare Metals 2024年第1期43卷 212-224页

作者： Yang Liu Pan-Pan Zhou Xue-Zhang Xiao Jia-Cheng Qi Jia-Peng Bi Tiao Ying Xing-Wen Feng Yan Shi Wen-Hua Luo Li-Xin Chen State key laboratory of Silicon materials School of Materials Science and EngineeringZhejiang UniversityHangzhou 310027China Institute of materials China Academy of Engineering PhysicsMianyang 621907China key laboratory of Advanced materials and Applications for Batteries of zhejiang province Hangzhou 310013China

Efficient capture,safe storage and release of tritium from the international thermonuclear experimental reactor(ITER) reaction exhaust gas is a perplexing problem,and the development of an efficient tritium-getter material with ultra-low hydrogenation equilibrium pressure is considered as a reliable *** this work,Zr_(2)Co alloy was selected as a tritium-getter material and prepared through induction levitation *** performance test results show that Zr_(2)Co exhibits an ultra-low hydrogenation equilibrium pressure of 3.22 × 10^(-6) Pa at 25℃ and excellent hydriding kinetics under a low hydrogen pressure of 0.005 ***,unique phase transition behaviors were presented in Zr_(2)Co-H ***,Zr_(2)CoH_(5) formed by Zr_(2)Co hydrogenated at room temperature is initially decomposed into ZrH_(2) and ZrCoH_(3) at200 ℃.With the temperature increasing to 350 ℃,ZrCoH_(3)is dehydrogenated to ZrCo,and then ZrCo further reacts with ZrH_(2) at 650 ℃ to reform Zr_(2)Co and *** the staged phase transition pathways during dehydrogenation,the decomposition of Zr_(2)CoH_(5) occurs preferentially,which is well accordance with both the smallest reaction energy barrier and the maximum reaction spontaneity that are determined respectively from kinetics activation energy and thermodynamics Gibbs free ***,first principles calculation results indicate that the stronger binding of hydrogen in interstitial environments of ZrCoH_(3)and ZrH_(2) triggers the hydrogen-stabilized phase transformation of Zr_(2)CoH_(5).The unique phase transition mechanisms in Zr_(2)Co-H system can shed light on the further exploration and regulation of analogous staged phase transition of hydrogen storage materials.

关键词： Zr_(2)Co alloy Tritium-getter materials Ultralow equilibrium hydrogen pressure Phase transition mechanism

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Multi-material magnetic field-assisted additive manufacturing system for flexible actuators with programmable magnetic arrangements

引用

Frontiers of Mechanical Engineering 2024年第2期19卷 109-120页

作者： Yujie HUANG Haonan SUN Chengqian ZHANG Ruoxiang GAO Hongyao SHEN Peng ZHAO The State key laboratory of Fluid Power and Mechatronic Systems College of Mechanical EngineeringZhejiang UniversityHangzhou 310027China The key laboratory of 3D Printing Process and Equipment of zhejiang province College of Mechanical EngineeringZhejiang UniversityHangzhou 310027China Center for X-Mechanics Department of Engineering MechanicsZhejiang UniversityHangzhou 310027China

Manufacturing flexible magnetic-driven actuators with complex structures and magnetic arrangements to achieve diverse functionalities is becoming a popular *** various manufacturing technologies,magnetic-assisted digital light processing(DLP)stands out because it enables precise manufacturing of macro-scale structures and micro-scale distributions with the assistance of an external magnetic *** research on manufacturing magnetic flexible actuators mostly employs single materials,which limits the magnetic driving performance to some *** on these characterizations,we propose a multi-material magnetic field-assisted DLP technology to produce flexible actuators with an accuracy of 200μ*** flexible actuators are printed using two materials with different mechanical and magnetic *** the interface connectivity of multi-material printing,the effect of interfaces on mechanical properties is also *** results indicate good chemical affinity between the two materials we *** overlap or connection length of the interface moderately improves the tensile strength of multi-material *** addition,we investigate the influence of the volume fraction of the magnetic part on *** and experimental results indicate that increasing the volume ratio(20%to 50%)of the magnetic structure can enhance the responsiveness of the actuator(more than 50%).Finally,we successfully manufacture two multi-material flexible actuators with specific magnetic arrangements:a multi-legged crawling robot and a flexible gripper capable of crawling and grasping *** results confirm that this method will pave the way for further research on the precise fabrication of magnetic flexible actuators with diverse functionalities.

关键词： multi-material magnetic field-assisted manufacturing digital light processing flexible actuators magnetic arrangement

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

A Review on the Mullins Effect in Tough Elastomers and Gels

引用

Acta Mechanica Solida Sinica 2024年第2期37卷 181-214页

作者： Lin Zhan Shaoxing Qu Rui Xiao MOE key Lab of Disaster Forecast and Control in Engineering College of Mechanics and Construction EngineeringJinan UniversityGuangzhou510632China State key laboratory of Fluid Power and Mechatronic System Key Laboratory of Soft Machines and Smart Devices of Zhejiang ProvinceDepartment of Engineering MechanicsZhejiang UniversityHangzhou310027China

Tough elastomers and gels have garnered broad research interest due to their wide-ranging potential ***,during the loading and unloading cycles,a clear stress softening behavior can be observed in many material systems,which is also named as the Mullins *** this work,we aim to provide a complete review of the Mullins effect in soft yet tough materials,specifically focusing on nanocomposite gels,double-network hydrogels,and multi-network *** first revisit the experimental observations for these soft *** then discuss the recent developments of constitutive models,emphasizing novel developments in the damage mechanisms or network *** phenomenological models will also be briefly *** attention is then placed on the anisotropic and multiaxial modeling *** is demonstrated that most of the existing models fail to accurately predict the multiaxial data,posing a significant challenge for developing future anisotropic models tailored for tough gels and elastomers.

关键词： Mullins effect Double-network hydrogels Nanocomposite gels Multi-network elastomers Anisotropic damage model Multiaxial model

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Recent development of three-dimension printed graphene oxide and MXene-based energy storage devices

引用

Tungsten 2024年第1期6卷 196-211页

作者： Liang-Hao Yu Xin Tao Shang-Ru Feng Jin-Tao Liu Lin-Lin Zhang Guang-Zhen Zhao Guang Zhu key laboratory of Spin Electron and Nanomaterials of Anhui Higher Education Institutes Suzhou UniversitySuzhou 234000China key laboratory of Leather of zhejiang province College of Chemistry and Materials EngineeringWenzhou UniversityWenzhou 325035China

The research for three-dimension(3D)printing carbon and carbide energy storage devices has attracted widespread exploration *** designable in structure and materials,graphene oxide(GO)and MXene accompanied with a direct ink writing exhibit a promising prospect for constructing high areal and volume energy density *** review not only summarizes the recent advances in 3D printing energy storage devices including printing methods,ink rheological properties,and different energy storage systems,but also discusses the printing methods related to energy *** addition,the binder or additive free of two-dimensional carbide materials is quite important for the present electrochemical energy storage devices,which also are presented.

关键词： 3D printing Two-dimensional materials Energy storage device Ink theological MXene

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

欢迎您,

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

请选择保存的检索档案：

请选择收藏分类：

通借通还

欢迎您,

建议与咨询 留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

请选择保存的检索档案： 新增检索档案 确定 取消

请选择收藏分类： 新增自定义分类 确定 取消

通借通还

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

请选择保存的检索档案：

请选择收藏分类：