检索结果-南通市图书馆

Acta metallurgica Sinica(English Letters) 2024年第9期37卷 1467-1479页

作者： Yakui Chen Shitong Wei Dong Wu Shanping Lu Shenyang National laboratory for materials Science Institute of Metal ResearchChinese Academy of SciencesShenyang110016China School of materials Science and Engineering University of Science and Technology of ChinaShenyang110016China CAS key laboratory of nuclear materials and safety assessment Institute of Metal ResearchChinese Academy of SciencesShenyang110016China

The high Si-bearing 15Cr-9Ni-Nb metastable austenitic stainless steel weld metal was prepared via gas tungsten arc welding and then processed by stabilized heat treatment(SHT)at 850℃ for 3 *** effects of 550℃ aging on the α'-martensitic transformation of the as-welded and the SHT weld metals were *** results showed that the weld metal had poor thermal stability of *** precipitation of NbC during the 850℃ SHT made the thermal stability of the local matrix decrease and led to the formation of a large amount of C-depleted α'-*** precipitation of coarse σ-phase at the δ-ferrite led to the Cr-depleted zone and the formation of Cr-depleted α'-martensite at the early stage of 550℃ *** homogenized diffusion of C and Cr in the matrix during 550℃ aging led to the restoration of austenitic thermal stability and the decrease of α'-martensite *** C-depleted α'-martensite content in the SHT weld metal decreased rapidly at the early stage of aging due to the fast diffusion rate of the C atom in the matrix,while the Cr-depleted α'-martensite decreased at the later stage of aging due to the decreased diffusion rate of the Cr.

关键词： Metastable austenitic stainless steel weld metal α'-martensitic transformation δ-ferrite σ-phase

Effect of Al_(2)O_(3)on the Mechanical Properties of(B_(4)C+Al_(2)O_(3))/Al Neutron Absorbing materials

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Acta metallurgica Sinica(English Letters) 2024年第8期37卷 1411-1420页

作者： J.X.Cai B.M.Shi N.Li Y.Liu Z.G.Zhang Y.N.Zan Q.Z.Wang B.L.Xiao Z.Y.Ma Shi‑Changxu Innovation Center for Advanced materials Institute of Metal ResearchChinese Academy of SciencesShenyang 110016China key laboratory of nuclear materials and safety assessment Institute of Metal ResearchChinese Academy of SciencesShenyang 110016China nuclear Equipment Division Beijing Institute of Nuclear EngineeringChina Nuclear Power Engineering Co.Ltd.Beijing 100840China Department of materials Science School of Mechanical EngineeringShenyang UniversityShenyang 110044China

B_(4)C/Al composites are widely utilized as neutron absorbing materials for the storage and transportation of spent nuclear *** order to improve the high-temperature mechanical properties of B_(4)C/Al composites,in-situ nano-Al_(2)O_(3)was introduced utilizing oxide on Al powder *** this study,the Al_(2)O_(3)content was adjusted by utilizing spheroid Al powder with varying diameters,thereby investigating the impact of Al_(2)O_(3)content on the tensile properties of(B_(4)C+Al_(2)O_(3))/Al *** was found that the pinning effect of Al_(2)O_(3)on the grain boundaries could hinder the recovery of dislocations and lead to dislocation accumulation at high *** the result,with the increase in Al_(2)O_(3)content and the decrease in grain size,the high-temperature strength of the composites increased *** finest Al powder used in this investigation had a diameter of 1.4μm,whereas the resultant composite exhibited a maximum strength of 251 MPa at room temperature and 133 MPa at 350℃,surpassing that of traditional B_(4)C/Al composites.

关键词： Al matrix composites Neutron absorbing materials (B_(4)C+Al_(2)O_(3))/Al composites High-temperature strength

Electrochemical Hydrogen Charging on Corrosion Behavior of Ti-6Al-4V Alloy in Artificial Seawater

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Chinese Journal of Mechanical Engineering 2024年第1期37卷 296-308页

作者： Yanxin Qiao Yue Qin Huiling Zhou Lanlan Yang Xiaojing Wang Zhengbin Wang Zhenguang Liu Jiasheng Zou School of materials Science and Engineering Jiangsu University of Science and TechnologyZhenjiang 212003China Yangzhou Changelight Co. LtdYangzhou 225012China CAS key laboratory of nuclear materials and safety assessment Institute of Metal ResearchChinese Academy of SciencesShenyang 110016China

This study employs advanced electrochemical and surface characterization techniques to investigate the impact of electrochemical hydrogen charging on the corrosion behavior and surface film of the Ti-6Al-4V *** findings revealed the formation ofγ-TiH andδ-TiH_(2) hydrides in the alloy after hydrogen *** hydrogen charging resulted in more significant degradation of the alloy microstructure,leading to deteriorated protectiveness of the surface *** trend was further confirmed by the electrochemical measurements,which showed that the corrosion resistance of the alloy progressively worsened as the hydrogen charging time was ***,this work provides valuable insights into the mechanisms underlying the corrosion of Ti-6Al-4V alloy under hydrogen charging conditions.

关键词： Ti-6Al-4V alloy Hydrogen charging Electrochemical corrosion Passive film

Numerical simulation of melt flow and temperature field during DC casting 2024 aluminium alloy under different casting conditions

在线全文

学校读者我要写书评

暂无评论

China Foundry 2024年第4期21卷 387-396页

作者： Jin-chuan Wang Yu-bo Zuo Qing-feng Zhu Jing Li Rui Wang Xu-dong Liu key laboratory of Electromagnetic Processing of materials Ministry of EducationNortheastern UniversityShenyang 110819China School of materials Science and Engineering Northeastern UniversityShenyang 110819China Engineering research Center of Advanced materials Preparing Technology Ministry of EducationShenyang 110819China CAS key laboratory of nuclear materials and safety assessment Institute of Metal ResearchChinese Academy of SciencesShenyang 110016China

Casting speed,casting temperature and secondary cooling water flow rate are the main process parameters affecting the DC casting *** parameters significantly influence the flow and temperature fields during casting,which are crucial for the quality of the ingot and can determine the success or failure of the casting *** simulation,with the advantages of low cost,rapid execution,and visualized results,is an important method to study and optimize the DC casting *** the present work,a simulation model of DC casting 2024 aluminum alloy was established,and the reliability of the model was ***,the influence of casting parameters on flow field and temperature field was studied in detail by numerical simulation *** show that with the increase of casting speed,the melt flow becomes faster,the depths of slurry zone and mushy zone increase,and the variation of slurry zone depth is greater than that of mushy *** an increase in casting temperature,the melt flow rate increases,the depth of the slurry zone becomes shallower,and the depth of the mushy zone experiences only minor *** simulation results further indicate that the increase of the flow rate of the secondary cooling water slightly reduces the depths of both slurry and mushy zone.

关键词： aluminium DC casting flow field temperature field numerical simulation

Effects of Hydrogen Charging Time and Pressure on the Hydrogen Embrittlement Susceptibility of X52 Pipeline Steel Material

在线全文

学校读者我要写书评

暂无评论

Acta metallurgica Sinica(English Letters) 2024年第2期37卷 293-307页

作者： Hong-Jiang Wan Xiao-Qi Wu Hong-Liang Ming Jian-Qiu Wang En-Hou Han School of materials Science and Engineering University of Science and Technology of ChinaShenyang110016China CAS key laboratory of nuclear materials and safety assessment Institute of Metal ResearchChinese Academy of SciencesShenyang110016China School of materials Science and Engineering Northeastern UniversityShenyang110819China institute of Corrosion Science and Technology Guangzhou510530China

The effects of hydrogen charging time and pressure on the hydrogen embrittlement(HE)susceptibility of X52 pipeline steel material are studied by slow strain rate tensile *** fracture morphologies of the specimens are observed by scanning electron *** HE susceptibility of the X52 pipeline steel material increases with an increase in both hydrogen charging time and hydrogen *** a charging time of 96 h,the HE susceptibility index reaches 45.86%,approximately 3.6 times that at a charging time of 0 ***,a charging pressure of 4 MPa results in a HE susceptibility index of 31.61%,approximately 2.5 times higher than that at a charging pressure of 0.3 MPa.

关键词： Hydrogen embrittlement X52 pipeline steel material Tubular specimen Hydrogen charging time Hydrogen charging pressure

An efficient CuZr-based metallic glasses electrode material for electrocatalytic degradation of azo dyes

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Journal of Environmental Sciences 2024年第2期136卷 537-546页

作者： Zhiwang Deng Bowen Zhao Songtao Li Zhengkun Li Shiming Zhang Kewei Zhang Zhengwang Zhu Taiyuan University of Science and Technology School of materials science and engineeringTaiyuan 030024China Shi-changxu Innovation Center for Advanced materials Institute of Metal ResearchChinese Academy of SciencesShenyang 110016China Chinese Academy of Sciences key laboratory of nuclear materials and safety assessment Institute of Metal ResearchChinese Academy of SciencesShenyang 110016China Qingdao Yunlu Advanced materials Technology Co. Ltd.Qingdao 266232China

metallic glasses have received a lot of attention on wastewater treatment due to their unique atomic structure,and the use of metallic glasses as electrodes has produced unexpected electrocatalytic degradation effects for many pollutants through combining with electrochemical ***,it still is a formidable challenge to find a metallic glass electrode material with both efficient and clean for the catalytic degradation of *** this work,the Cu_(55)Zr_(45)metallic glassy ribbons are used as an electrode to degrade azo dyes and show the excellent degradation effect,which can reach 95.6%within 40 *** the degradation process,almost no additives are produced and Cu_(55)Zr_(45)metallic glassy ribbons have excellent effects under different pH ***,it exhibits good stability for degradation efficiency during the 8 cycle degradation tests of the amorphous alloy *** the copper nanoparticles are exposed on the surface of the ribbons,the oxidized copper obtained synergistically produce activated radicals is the primary degradation mechanism,where the auxiliary degradation mechanisms include electron transfer and the promotion of active *** research develops a new type of electrode material for wastewater treatment,and the economy and high efficiency of Cu55Zr45metallic glass endow it the expandable functional applications.

关键词： metallic glasses Azo dyes Electrocatalytic Degradation Oxidized copper

Mechanical Behavior and Failure Mechanism of an As-Extruded Mg-11wt%Y Alloy at Elevated Temperature

在线全文

学校读者我要写书评

暂无评论

Acta metallurgica Sinica(English Letters) 2024年第6期37卷 969-981页

作者： Lan Zhang Dao-Kui Xu Bao-Jie Wang Cui-Lan Lu Shuo Wang Xiang-Bo Xu Dong-Liang Wang Xin Lv En-Hou Han School of materials Science and Engineering University of Science and Technology of ChinaShenyang110016China key laboratory of nuclear materials and safety assessment Institute of Metal ResearchChinese Academy of SciencesShenyang110016China School of Environmental and Chemical Engineering Shenyang Ligong UniversityShenyang110159China key Lab of Electromagnetic Processing of materials Ministry of EducationNortheastern UniversityShenyang110819China institute of Corrosion Science and Technology Guangdong510070China

Through carrying out the high-temperature tensile experiments on an as-extruded Mg-11wt%Y alloy at 350℃,400℃,450℃,500℃and 550℃,the mechanical behavior and fracture mechanisms at elevated temperatures are investigated and *** results show that with the increase of temperature,the yield strength and ultimate tensile strength of the alloy increase at first and then decrease,while that the elongation ratio decreases firstly and then *** the sample being tested at 350℃,the values of yield strength,ultimate tensile strength and the elongation ratio are 188 MPa,266 MPa and 11%,*** 400℃,the yield strength and ultimate tensile strength reach the maximum values of,respectively,198 MPa and 277 MPa,but the elongation ratio is the lowest and its value is only 8%.When the applied temperature is increased to 550℃,the values of yield strength and ultimate tensile strength,respectively,decrease to 140 MPa and 192 MPa and the elongation ratio increases to 38%.Failure analysis demonstrates that the fracture surfaces of different samples are mainly composed of plastic dimples and exhibit the typical characteristic of ductile *** observation to the fracture side surfaces indicates that at the temperatures of 350℃and 400℃,microcracks mainly initiate in the interior of Mg_(24)Y_(5)*** the temperatures are 450℃,500℃and 550℃,the cracks preferentially initiate at the Mg_(24)Y_(5)/α-Mg interfaces.

关键词： Mg-Y alloy High-temperature tensile properties Fracture mechanism Failure analysis

Effect of icosahedral phase formation on the stress corrosion cracking(SCC)behaviors of the as-cast Mg-8%Li(in wt.%)based alloys

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Journal of Magnesium and Alloys 2024年第1期12卷 225-236页

作者： Shuo Wang Daokui Xu Dongliang Wang Zhiqiang Zhang Baojie Wang key Lab of Electromagnetic Processing of materials Ministry of EducationNortheastern UniversityShenyang110819China key laboratory of nuclear materials and safety assessment Institute of Metal ResearchChinese Academy of SciencesShenyang110016China Engineering research Center of Advanced materials Preparing Technology Ministry of EducationNortheastern UniversityShenyang110819China School of Environmental and Chemical Engineering Shenyang Ligong UniversityShenyang110159China Binzhou institute of Technology BinzhouShandong Province256606China Shandong key laboratory of Advanced Aluminium materials and Technology BinzhouShandong Province256606China

Through exploring the stress corrosion cracking(SCC)behaviors of the as-cast Mg-8%Li and Mg-8%Li-6%Zn-1.2%Y alloys in a 0.1 M NaCl solution,it revealed that the SCC susceptibility index(I_(SCC))of the Mg-8%Li alloy was 47%,whilst the I_(SCC)of the Mg-8%Li-6%Zn-1.2%Y alloy was 68%.Surface,cross-sectional and fractography observations indicated that for the Mg-8%Li alloy,theα-Mg/β-Li interfaces acted as the preferential crack initiation sites and propagation paths during the SCC *** regard to the Mg-8%Li-6%Zn-1.2%Y alloy,the crack initiation sites included the I-phase and the interfaces of I-phase/β-Li andα-Mg/β-Li,and the preferential propagation paths were the I-phase/β-Li andα-Mg/β-Li ***,the SCC of the two alloys was concerned with hydrogen embrittlement(HE)mechanism.

关键词： Magnesium-lithium alloy Stress corrosion cracking I-phase Fracture analysis

Strengthening strategy for high-performance friction stir lap welded joints based on 5083 Al alloy

在线全文

学校读者我要写书评

暂无评论

International Journal of Minerals,metallurgy and materials 2024年第11期31卷 2498-2507页

作者： Yujia Shen Jijie Wang Beibei Wang Peng Xue Fengchao Liu Dingrui Ni Bolv Xiao Zongyi Ma College of Material Science and Engineering Shenyang Aerospace UniversityShenyang 110136China Shi-changxu Innovation Center for Advanced materials Institute of Metal ResearchChinese Academy of SciencesShenyang 110016China CAS key laboratory of nuclear materials and safety assessment Institute of Metal ResearchChinese Academy of SciencesShenyang 110016China Binzhou institute of Technology Shandong Key Laboratory of Advanced Aluminium Materials and TechnologyWeiqiao-UCAS Science and Technology ParkBinzhou 256606China Centre of Excellence for Advanced materials Dongguan 523808China

During aircraft,ship,and automobile manufacturing,lap structures are frequently produced among Al alloy skins,wall panels,and *** occurrence of welding defects severely decreases mechanical properties during friction stir lap welding(FSLW).This study focuses on investigating the effects of rotation rate,multipass welding,and cooling methods on lap defect formation,microstructural evolution,and mechanical *** defects were eliminated by decreasing welding speed,applying two-pass FLSW with a small welding tool,and introducing additional water cooling,thus leading to a remarkable increase in effective sheet thickness and lap *** above strategy yielded defect-free joints with an ultrafine-grained microstructure and increased tensile shear force from 298 to 551 N/*** fracture behavior of FSLW joints was systematically studied,and a fracture factor of lap joints was proposed to predict their fracture *** reducing the rotation rate,using two-pass welding,and employing additional water cooling strategies,an enlarged,strengthened,and defect-free lap zone with refined ultrafine grains was achieved with a quality comparable to that of lap welds based on 7xxx Al ***,this study provides a valuable FSLW method for eliminating hook defects and improving joint performance.

关键词： friction stir lap welding defect control microstructure fracture mechanisms mechanical properties

Designing ultrastrong and thermally stable FeCrAl alloys with the fine-grained structure

在线全文

学校读者我要写书评

暂无评论

Journal of materials Science & Technology 2024年第4期171卷 198-208页

作者： Shuaiyang Liu Jinyu Zhang Hui Wang Gang Liu Xiangdong Ding Jun Sun State key laboratory for Mechanical Behavior of materials Xi’an Jiaotong UniversityXi’an 710049China Science and Technology on Reactor Fuel and materials laboratory Nuclear Power Institute of ChinaChengdu 610041China

Designing microstructurally stable FeCrAl alloys with excellent strength-ductility synergy is highly desir-able for their engineering ***,due to the preference nucleation of precipitates at grain boundaries(GBs),the improved precipitation strengthening of these alloys is usually accompanied by in-tergranular ***,we propose a novel thermomechanical processing route coupled with the Si alloying strategy via precipitation of coherent deformable Laves precipitates inside equiaxed fine-grains to achieve FeCrAl alloys with ultrahigh yield strength over∼992 MPa,excellent uniform elongation of∼7.6%at room temperature,and superior thermal stability at temperature∼1200℃.The Si alloying not only decreases the stacking fault energy of Laves precipitates favorable for their stacking-fault-mediated deformation but also hinders grain coarsening at 1200℃due to the Si-enrichment favorable for GB pin-ning *** results prove the possibility of achieving the collaborative enhancement of mutually exclusive properties in alloys,such as strength-ductility-thermal stability via nanoprecipitation engineer-ing,and offer a promising route to prepare dispersion-strengthened materials.

关键词： FeCrAl alloys Si alloying Mechanical properties Thermal stability Laves phase