检索结果-南通市图书馆

International Journal of Minerals,metallurgy and Materials 2024年第1期31卷 60-70页

作者： Hai Li Aibing Jin Shuaijun Chen Yiqing Zhao You Ju key laboratory of ministry of education for efficient mining and safety of metal Mine University of Science and Technology BeijingBeijing 100083China School of Civil and Resources Engineering University of Science and Technology BeijingBeijing 100083China

The challenge of high temperatures in deep mining remains harmful to the health of workers and their production efficiency The addition of phase change materials (PCMs) to filling slurry and the use of the cold storage function of these materials to reduce downhole temperatures is an effective approach to alleviate the aforementioned ***–CaCl_(2)·6H_(2)O composite PCM was prepared in the *** composition,phase change latent heat,thermal conductivity,and cemented tailing backfill (CTB) compressive strength of the new material were *** heat transfer characteristics and endothermic effect of the PCM were simulated using Fluent *** results showed the following:(1) The new paraffin–CaCl_(2)·6H_(2)O composite PCM improved the thermal conductivity of native paraffin while avoiding the water solubility of CaCl_(2)·6H_(2)O.(2) The calculation formula of the thermal conductivity of CaCl_(2)·6H_(2)O combined with paraffin was deduced,and the reasons were explained in principle.(3) The“enthalpy–mass scale model”was applied to calculate the phase change latent heat of nonreactive composite PCMs.(4)The addition of the paraffin–CaCl_(2)·6H_(2)O composite PCM reduced the CTB strength but increased its heat absorption *** research can give a theoretical foundation for the use of heat storage backfill in green mines.

关键词： paraffin–CaCl_(2)·6H_(2)O heat transfer simulation heat calculation phase change material-based backfill latent heat of formula

Roughness characterization and shearing dislocation failure for rock-backfill interface

在线全文

学校读者我要写书评

暂无评论

International Journal of Minerals,metallurgy and Materials 2024年第6期31卷 1167-1176页

作者： Meifeng Cai Zhilou Feng Qifeng Guo Xiong Yin Minghui Ma Xun Xi key laboratory of high-efficient Mine and safety of metal Mines of ministry of education Beijing 100083China key laboratory of Urban and Underground Space Engineering University of Science and Technology BeijingBeijing 100083China Shandong Gold Group Co LtdJinan 250102China

Shearing dislocation is a common failure type for rock–backfill interfaces because of backfill sedimentation and rock strata movement in backfill mining *** paper designed a test method for rock–backfill shearing *** digital image techno-logy and three-dimensional(3D)laser morphology scanning techniques,a set of 3D models with rough joint surfaces was ***,the mechanical behavior of rock–backfill shearing dislocation was investigated using a direct shear *** effects of interface roughness on the shear–displacement curve and failure characteristics of rock–backfill specimens were *** 3D fractal dimen-sion,profile line joint roughness coefficient(JRC),profile line two-dimensional fractal dimension,and the surface curvature of the frac-tures were *** correlation characterization of surface roughness was then analyzed,and the shear strength could be measured and calculated using *** results showed the following:there were three failure threshold value points in rock–backfill shearing dis-location:30%–50%displacement before the peak,70%–90%displacement before the peak,and 100%displacement before the peak to post-peak,which could be a sign for rock–backfill shearing dislocation *** surface JRC could be used to judge the rock–backfill shearing dislocation failure,including post-peak sliding,uniform variations,and gradient change,corresponding to rock–backfill disloca-tion failure on the field *** research reveals the damage mechanism for rock–backfill complexes based on the free joint surface,fills the gap of existing shearing theoretical systems for isomerism complexes,and provides a theoretical basis for the prevention and control of possible disasters in backfill mining.

关键词： rock–backfill roughness correlation characterization shearing dislocation interface failure

Loading capacity and emulsification phenomena of HREE extraction by dialkylphosphinic acids with different β,γ,δ-substituents

在线全文

学校读者我要写书评

暂无评论

Journal of Rare Earths 2024年第1期42卷 191-199,I0007页

作者： Junlian Wang Guodong Xu Wen Xu Jianguo Cui Yufu Chen Ziyong Chang School of Civil and Resource Engineering University of Science and Technology BeijingBeijing100083China key laboratory of ministry of education for efficient mining and safety of metal Mines Beijing100083China State key laboratory of Baiyunobo Rare Earth Resource Researches and Comprehensive Utilization Baotou Research Institute of Rare EarthsBaotou014030China

The relationship between dialkylphosphinic acid structure and their loading capacity for HREEs and emulsification phenomena has rarely been *** this paper,we took Lu extraction as an example to study the effect of β,γ,δ-substituents of dialkylphosphinic acids on their loading capacity and anti-emulsification performance for *** discuss conveniently,the dialkylphosphinic acids were classified into two groups:β-substituent group(P208,INET-1,P218,USTB-1 and P227)and γ,δ-substituent group(P218,P2132 and Cyanex 272).For β-substituent group extractants,their loading capacities are in the order P208(299.7 mg/L)≈INET-1(299.5 mg/L)>P218(270.8 mg/L)>>USTB-1(163.1 mg/L)>P227(151.4 mg/L),while their anti-emulsification/gelation performances are just in the opposite order P227>USTB-1>P218>P208≈INET-1 under the studied *** γ,δ-substituent group extractants,their loading capacities are in the order P218(270.8 mg/L)>P2132(192.3 mg/L)>Cyanex272(131.7 mg/L),while the anti-emulsification performance of P218 is better than those of P2132 and Cyanex *** loading capacity data given in the parentheses are obtained through repeatedly extracting Lu from ~4×10^(-4)mol/L of Lu aqueous feed solution with initial pH of 2.40 by 0.01 mol/L extractant at phase ratio A/O of 1:1.

关键词： Heavy rare earth element Dialkylphosphinic acid Extraction Loading capacity Emulsification

Reinforcing effects of polypropylene on energy absorption and fracturing of cement-based tailings backfill under impact loading

在线全文

学校读者我要写书评

暂无评论

International Journal of Minerals,metallurgy and Materials 2024年第4期31卷 650-664页

作者： Jiajian Li Shuai Cao Erol Yilmaz School of Civil and Resources Engineering University of Science and Technology BeijingBeijing 100083China State key laboratory of high-efficient mining and safety of metal Mines of ministry of education University of Science and Technology BeijingBeijing 100083China Department of Civil Engineering Geotechnical DivisionRecep Tayyip Erdogan UniversityFenerRize TR53100Turkey

Polypropylene(PP)fiber-reinforced cement-based tailings backfill(FRCTB)is a green compound material with superior crack resistance and has good prospects for application in underground ***,FRCTB exhibits susceptibility to dynamic events,such as impact ground pressure and blast *** paper investigates the energy and crack distribution behavior of FRCTB under dynamic impact,considering the height/diameter(H/D)*** Hopkinson pressure bar,industrial computed tomography scan,and scanning electron microscopy(SEM)experiments were carried out on six types of *** outcomes confirmed fiber aggregation at the bottom of *** H/D was less than 0.8,the proportion of PP fibers distributed along theθangle direction of80°-90°*** the total energy,all samples presented similar energy absorption,reflectance,and ***,a rise in H/D may cause a rise in the energy absorption rate of FRCTB during the peak phase.A positive correlation existed between the average strain rate and absorbed energy per unit *** increase in H/D resulted in a decreased crack volume fraction of *** the H/D was greater than or equal to 0.7,the maximum crack volume fraction of FRCTB was observed close to the incidence *** cracks were present only in the FRCTB with an H/D ratio of *** with H/D ratios of 0.5 and 0.6 showed similar distributions of weakly and heavily damaged *** fibers can limit the emergence and expansion of cracks by influencing their *** observations revealed considerable differences in the bonding strengths between fibers and the *** that adhered particularly well to the substrate were attracted together with the hydration products adhering to *** results show that FRCTB is promising as a sustainable and green backfill for determining the design properties of mining with backfill.

关键词： cement-based tailings fiber-reinforced backfills fracture energy absorption impact loading

Field test of high-power microwave-assisted mechanical excavation for deep hard iron ore

在线全文

学校读者我要写书评

暂无评论

Journal of Rock Mechanics and Geotechnical Engineering 2024年第6期16卷 1922-1935页

作者： Feng Lin Xia-Ting Feng Shiping Li Xiao Hai Jiuyu Zhang Xiangxin Su Tianyang Tong Jianchun Song key laboratory of ministry of education on Safe mining of Deep metal Mines Northeastern UniversityShenyang110819China Benxi Longxin mining Corporation Limited Benxi117000China

Microwave-assisted mechanical excavation has great application prospects in mines and tunnels,but there are few field experiments on microwave-assisted rock *** paper takes the Sishanling iron mine as the research object and adopts the self-developed high-power microwave-induced fracturing test system for hard rock to conduct field experiments of microwave-induced fracturing of iron *** heating and reflection evolution characteristics of ore under different microwave parameters(antenna type,power,and working distance)were studied,and the optimal microwave parameters were ***,the ore was irradiated with the optimal microwave parameters,and the cracking effect of the ore under the action of the high-power open microwave was *** results show that the reflection coefficient(standing wave ratio)can be rapidly(high-temperature area under the action of the two antennas(right-angled and equal-angled horn antenna)are basically the same and decrease with the increase of working *** optimal microwave parameters are:a right-angle horn antenna with a working distance of 5 ***,in further experiments,the optimal parameters were used to irradiate for 20 s and 40 s at a microwave power of 60 kW,*** surface damage extended 38 cm×30 cm and 53 cm×30 cm,respectively,and the damage extended to a depth of about 50 *** drilling speed was increased by 56.2%and 66.5%,respectively,compared to the case when microwaves were not used.

关键词： Microwave parameters high power Field experiment Mechanical mining

Fabrication of pollution-free coal gangue-based catalytic material utilizing ferrous chloride as activator for efficient peroxymonosulfate activation

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

International Journal of Coal Science & Technology 2024年第1期11卷 103-118页

作者： Zhiming Sun Xinlin Wang Shaoran Jia Jialin Liang Xiaotian Ning Chunquan Li School of Chemical and Environmental Engineering China University of Mining and Technology(Beijing)Beijing100083China key laboratory of Coal Processing and efficient Utilization (China University of Mining and Technology)Ministry of EducationXuzhou221116China

Novel coal gangue-based persulfate catalyst(CG-FeCl_(2))was successfully synthesized by the means of calcinating under nitrogen atmosphere with the addition of ferrous chloride tetrahydrate(FeCl_(2)·_(4)H_(2)O).The phase transformation of the prepared materials and gas products during the heating process are thoroughly *** is suggested that ferrous chloride participated in the phase transformation and formed Si-O-Fe *** the main gaseous products are H_(2)O,H_(2),and HCl during the heating ***,the ability of CG-FeCl_(2) to activate peroxymonosulfate(PMS)for catalytic degradation of polycyclic aromatic hydrocarbons(PAHs)and phenol was deeply *** than 95%of naphthyl,phenanthrene and phenol were removed under optimizied *** addition,1O_(2),·OH,and SO_(4)·−were involved in the CG-FeCl_(2)/PMS system from the free radical scavenging experiment,where 1O_(2) played a major role during the oxidation ***,CG-FeCl_(2)/PMS system exhibited superior stability in a relatively wide pH range and the presence of common anion from related degradation ***,the novel CG-FeCl_(2) is an efficient and environmentally friendly catalyst,displaying potential application prospect in the field of PAHs and phenol-contaminated wastewater treatment.

关键词： Coal gangue Persulfate activation Advanced oxidation processes Polycyclic aromatic hydrocarbons Phenol Ferrous chloride

Cross-linkedα-amylase aggregates on Fe3O4 magnetic nanoparticles modified with polydopamine/polyethyleneimine for efficient hydrolysis of starch

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Particuology 2024年第7期90卷 98-105页

作者： Jiandong Cui Xiuming Tang Qingqing Ma Yuyan Chang Qunli Zhang Shiru Jia State key laboratory of Food Nutrition and safety Laboratory of Industrial Fermentation MicrobiologyMinistry of EducationTianjin University of Science and TechnologyTianjin 300457China key laboratory of Biomass Chemical Engineering of ministry of education Zhejiang UniversityHangzhou 310027China

In this workα-amylase was immobilized on magnetic Fe3O4 nanoparticles with polyethylenimine(PEI)/polydopamine(PDA)coating or 3-aminopropyl triethoxysilane(APTES)for the first time via adsorption–precipitation–*** with the freeα-amylase,the resultant magnetic cross-linkedα-amylase aggregates(PEI/PDA-M-CLEAs and N-M-CLEAs)exhibited excellent thermal and storage stability as well as pH *** storage at 25°C for 60 days,freeα-amylase only retained 60%of its initial activity,while PEI/PDA-M-CLEAs and N-M-CLEAs retained 80%and 78%of their initial activities,***,N-M-CLEAs and PEI/PDA-M-CLEAs showed good *** 6 repeated uses,PEI/PDA-M-CLEAs and N-M-CLEAs still maintained 65%and 62%of their initial activities,***,PEI/PDA-M-CLEAs and N-M-CLEAs exhibited higher starch hydrolysis efficiency than freeα-*** maximum dextrose equivalent(DE)values of starch hydrolysis by PEI/PDA-M-CLEAs and N-M-CLEAs reached 29.24%and 28.79%within 90 min,***,the maximum DE values of starch hydrolysis by the freeα-amylase was only 27.89%even in 150 *** magnetic cross-linkedα-amylase aggregates could be introduced as effective biocatalyst for industrial applications in production of maltose syrups.

关键词： α-amylase Magnetic nanoparticles Functional modification Magnetic cross-linked enzyme aggregates Hydrolysis of starch

Perception field based imitation learning for unlabeled multi-agent pathfinding

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Science China(Information Sciences) 2024年第5期67卷 115-135页

作者： Wenjie CHU Ailun YU Wei ZHANG Haiyan ZHAO Zhi JIN School of Computer Science Peking University key laboratory of high-Confidence Software Technologies (Peking University) Ministry of Education

This paper proposes an imitation learning method to learn a universal agent policy for unlabeled multi-agent pathfinding(unlabeled MAPF) in grid environments. The method transforms the unlabeled MAPF problem into a series of temporal-independent homogeneous classification problems for each *** on this transformation, a neural network is designed to imitate a distance-optimal expert *** neural network consists of two successive modules: perception field learner and field integrating *** former refines and encodes the current system state into a perception field for each agent by combining a set of learnable field-generating functions. The latter takes an agent's perception field as input and decides the agent's next action based on a triplet cross-attention mechanism. We evaluate our method on a diverse set of unlabeled MAPF tasks. Compared with state-of-the-art counterparts, the experimental results manifest the superiority of the proposed method in both generalization ability and scalability.

关键词： unlabeled multi-agent pathfinding perception field triplet cross-attention multi-agent imitation learning learning-based planning

A model for predicting the segregation directions of binary Geldart B particle mixtures in bubbling fluidized beds

在线全文

同方期刊数据库

学校读者我要写书评

暂无评论

Particuology 2024年第7期90卷 340-349页

作者： Chenmin Liu Yuemin Zhao Yanjiao Li Yuqing Feng Chenlong Duan Chenyang Zhou Liang Dong key laboratory of Coal Processing and efficient Utilization Ministry of EducationChina University of Mining and TechnologyXuzhou221116China School of Chemical Engineering and Technology China University of Mining and TechnologyXuzhou221116China Mineral Resources Business Unit CSIROClaytonVIC 3169Australia

In gas fluidization processes involving different types of particles,the mixing or segregation behavior of the solid mixture is crucial to the overall outcome of the *** study develops a model to predict the segregation directions of binary mixtures of Geldart B particles with density and size differences in bubbling fluidized *** proposed model was established by combining the particle segregation model,a previous particle segregation model,with a derived bed voidage equation of the bubbling fluidization based on the two-phase *** model was then analyzed with different function graphs of the model equations under various *** results indicated that an increase in gas velocity or volume fraction of larger particles would strengthen size segregation,causing the larger and less dense components to *** validate the model,42 sets of data collected from 6 independent literature sources were compared with the predictions of the *** the gas velocities were below 3.2 times the minimum gas velocity,the predictions were consistent with experimental *** study has shed new light on the mechanisms of particle segregation in binary fluidized systems and provides a theoretical foundation for designing and manipulating gas-solid fluidized reactors.

关键词： Particle segregation Binary mixture Bubbling fluidization Geldart B particles Two-phase theory

Evolution of mechanical parameters of Shuangjiangkou granite under different loading cycles and stress paths

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Journal of Rock Mechanics and Geotechnical Engineering 2024年第4期16卷 1113-1126页

作者： Liangjie Gu Xia-Ting Feng Rui Kong Chengxiang Yang Yuelin Xia key laboratory of ministry of education on Safe mining of Deep metal Mines Northeastern UniversityShenyang110819China State key laboratory of Geomechanics and Geotechnical Engineering Institute of Rock and Soil MechanicsChinese Academy of SciencesWuhan430071China

Surrounding rocks at different locations are generally subjected to different stress paths during the process of deep hard rock *** this study,to reveal the mechanical parameters of deep surrounding rock under different stress paths,a new cyclic loading and unloading test method for controlled true triaxial loading and unloading and principal stress direction interchange was proposed,and the evolution of mechanical parameters of Shuangjiangkou granite under different stress paths was studied,including the deformation modulus,elastic deformation increment ratios,fracture degree,cohesion and internal friction ***,stress path coefficient was defined to characterize different stress paths,and the functional relationships among the stress path coefficient,rock fracture degree difference coefficient,cohesion and internal friction angle were *** results show that during the true triaxial cyclic loading and unloading process,the deformation modulus and cohesion gradually decrease,while the internal friction angle gradually increases with increasing equivalent crack *** stress path coefficient is exponentially related to the rock fracture degree difference *** the stress path coefficient increases,the degrees of cohesion weakening and internal friction angle strengthening decrease *** cyclic loading and unloading under true triaxial principal stress direction interchange,the direction of crack development changes,and the deformation modulus increases,while the cohesion and internal friction angle decrease slightly,indicating that the principal stress direction interchange has a strengthening effect on the surrounding ***,the influences of the principal stress interchange direction on the stabilities of deep engineering excavation projects are discussed.

关键词： Triaxial cyclic loading and unloading test Stress path Deformation modulus and elastic deformation increment ratios Fracture degree Cohesion and internal friction angle