检索结果-南通市图书馆

Growth and inhibition of zinc anode dendrites in Zn-air batteries:Model and experiment

Chinese Journal of Chemical engineering 2024年第3期67卷 268-281页

作者： Cuiping He Qingyi Gou Yanqing Hou Jianguo Wang Xiang You Ni Yang Lin Tian Gang Xie Yuanliang Chen Kunming University of science and Technology State Key Laboratory of Complex Nonferrous Metal Resources Clean UtilizationKunming 650093China Kunming University of science and Technology Faculty of Metallurgical and Energy EngineeringKunming 650093China China Copper Co.Ltd KunmingYunnan 650051China State key laboratory of Advanced Metallurgy for non-ferrous metals Kunming 650051China Sichuan Shunying Power Battery Materials Co.Ltd Sichuan 620076China

Zinc(Zn)-air batteries are widely used in secondary battery research owing to their high theoretical energy density,good electrochemical reversibility,stable discharge performance,and low cost of the anode active material ***,the Zn anode also leads to many challenges,including dendrite growth,deformation,and hydrogen precipitation *** this context,Zn dendrite growth has a greater impact on the cycle *** this dissertation,a dendrite growth model for a Zn-air battery was established based on electrochemical phase field theory,and the effects of the charging time,anisotropy strength,and electrolyte temperature on the morphology and growth height of Zn dendrites were studied.A series of experiments was designed with different gradient influencing factors in subsequent experiments to verify the theoretical simulations,including elevated electrolyte temperatures,flowing electrolytes,and pulsed *** simulation results show that the growth of Zn dendrites is controlled mainly by diffusion and mass transfer processes,whereas the electrolyte temperature,flow rate,and interfacial energy anisotropy intensity are the main *** experimental results show that an optimal electrolyte temperature of 343.15 K,an optimal electrolyte flow rate of 40 ml·min^(-1),and an effective pulse charging mode.

关键词： Zn-air battery Zinc anode Zinc dendrite Simulated dendrite growth Inhibit dendrite growth Phase-field model

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Flotation separation of scheelite from calcite using luteolin as a novel depressant

引用

International Journal of Minerals,Metallurgy and Materials 2024年第3期31卷 462-472页

作者： Xiaokang Li Ying Zhang Haiyang He Yu Wu Danyu Wu Zhenhao Guan Faculty of Land and Resources engineering Kunming University of Science and TechnologyKunming 650093China State key laboratory of Clean Utilization of Complex non-ferrous Metal Resources Kunming University of Science and TechnologyKunming 650093China

This paper proposes luteolin(LUT)as a novel depressant for the flotation-based separation of scheelite and calcite in a sodium oleate(NaOL)*** suitability of LUT as a calcite depressant is confirmed through micro-flotation *** pH=9,with LUT concentration of 50 mg·L^(-1) and NaOL concentration of 50 mg·L^(-1),scheelite recovery reaches 80.3%.Calcite,on the other hand,exhibits a recovery rate of 17.6%,indicating a significant difference in floatability between the two ***,the surface modifica-tions of scheelite and calcite following LUT treatment are characterized using adsorption capacity testing,Zeta potential analysis,Fourier transform infrared spectroscopy(FT-IR),X-ray photoelectron spectroscopy(XPS),and atomic force microscopy(AFM).The study in-vestigates the selective depressant mechanism of LUT on *** capacity testing and Zeta potential analysis demonstrate sub-stantial absorption of LUT on the surface of calcite,impeding the further adsorption of sodium oleate,while its impact on scheelite is ***-IR and XPS analyses reveal the selective adsorption of LUT onto the surface of calcite,forming strong chemisorption bonds between the hydroxyl group and calcium ions *** directly illustrates the distinct adsorption densities of LUT on the two miner-al ***,LUT can effectively serve as a depressant for calcite,enabling the successful separation of scheelite and calcite.

关键词： scheelite calcite luteolin flotation depressant separation

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

non-equilibrium kinetic separation of thulium,yttrium and erbium on the surface of freely rising oil droplets

引用

Journal of Rare Earths 2024年第1期42卷 200-209,I0007页

作者： Na Sui Shukai Miao Kaihui Cui Fancheng Meng Kun Huang School of metallurgical and Ecological engineering University of Science and Technology BeijingBeijing100083China Beijing key laboratory of Green Recovery and Extraction of Rare and Precious metals University of Science and Technology BeijingBeijing100083China key laboratory of Green Process and engineering Institute of Process EngineeringChinese Academy of SciencesBeijing100190China

It is difficult to achieve selective separation and enrichment of different rare earths from high abundance yttrium ores efficiently only dependent on their discrepancy in thermodynamic *** present work suggests a new strategy based on non-equilibrium kinetic separation of Er and Tm on the surface of freely rising oil droplets to control the separation order of *** is revealed that the mutual separation of Er/Tm is significantly promoted with the separation coefficient of 2.89 during the non-equilibrium extraction with the addition of diethylenetriaminepentaacetic acid(DTPA).The extraction sequence of Tm,Er and Y can be controlled as Tm>Y>Er,thus Y can be selectively enriched during the process of separation of Er and Tm,Such a sequence is subject to the controllable dissociation rates of RE(Ⅲ)-DTPA complexes and extraction abilities of P507 with the three RE(Ⅲ)*** dissociation rate is dependent on the stabilities of RE(Ⅲ)-DTPA complexes and follows the sequence ofY(Ⅲ)—DTPA Er>Y to Tm>Y>Er.

关键词： DTPA Interface interaction non-equilibrium kinetic separation Rare earths P507

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Evolution of mechanical properties,localized corrosion resistance and microstructure of a high purity Al-Zn-Mg-Cu alloy during non-isothermal aging

引用

Journal of Central South University 2024年第6期31卷 1790-1807页

作者： DAI Xuan-xuan LI Yu-zhang LIU Sheng-dan YE Ling-ying BAO Chong-jun School of Materials science and engineering Central South UniversityChangsha 410083China key laboratory of Lightweight and High-strength Structural Materials Changsha 410083China key laboratory of non-ferrous metals science and engineering(Ministry of Education) Changsha 410083China Kunming metallurgical Research Institute Co. Ltd.Kunming 650031China

The evolution of mechanical properties,localized corrosion resistance of a high purity Al-Zn-Mg-Cu alloy during non-isothermal aging(NIA)was investigated by hardness test,electrical conductivity test,tensile test,intergranular corrosion test,exfoliation corrosion test,slow strain rate tensile test and electrochemical test,and the mechanism has been discussed based on microstructure examination by optical microscopy,electron back scattered diffraction,scanning electron microscopy and scanning transmission electron *** NIA treatment includes a heating stage from 40℃to 180℃with a rate of 20℃/h and a cooling stage from 180℃to 40℃with a rate of 10℃/*** results show that the hardness and strength increase rapidly during the heating stage of NIA since the increasing temperature favors the nucleation and the growth of strengthening precipitates and promotes the transformation of Guinier-Preston(GPI)zones toη'*** the cooling stage,the sizes ofη'phase increase with a little change in the number density,leading to a further slight increase of the hardness and *** NIA proceeds,the corroded morphology in the alloy changes from a layering feature to a wavy feature,the maximum corrosion depth decreases,and the reason has been analyzed based on the microstructural and microchemical feature of precipitates at grain boundaries and subgrain boundaries.

关键词： Al-Zn-Mg-Cu alloy non-isothermal aging mechanical properties localized corrosion resistance microstructure

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Understanding the Mechanism for the In-Plane Yielding Anisotropy of a Hot-Rolled Zirconium Plate

引用

Acta Metallurgica Sinica(English Letters) 2024年第6期37卷 1066-1076页

作者： Guodong Song Conghui Zhang Yunchang Xin Nobuhiro Tsuji Xinde Huang Bo Guan Xiaomei He School of metallurgical engineering Xi’an University of Architecture and TechnologyXi’an710055China key laboratory for Light-Weight Materials Nanjing Tech UniversityNanjing210009China Department of Materials science and engineering Kyoto UniversityYoshida-honmachiSakyo-kuKyoto606-8501Japan Institute of Applied Physics Jiangxi Academy of ScienceNanchang330029China

Previously,the in-plane mechanical anisotropy of Zr hot-rolled plates is ascribed mainly to the different activities of the deformation modes activated when loading along different *** this work,a quantitative study on the deformation behavior of a pure Zr hot-rolled plate under tension along the rolling direction(RD)and transverse direction(TD)reveals that both the activities of deformation modes and the anisotropy of grain boundary strengthening account for a tensile yield strength anisotropy along the TD and *** plasticity simulations using viso-plastic self-consistent model show that prismatic slip is the predominant deformation mode for tension along the RD(RD-tension),while prismatic slip and basal slip are co-dominant deformation modes under tension along the TD(TD-tension).A low fraction of■under TD-tension,while hardly activated under *** activation of basal slip with a much higher critical resolve shear stress under TD-tension contributes to a higher yield strength along the TD than along the *** grain boundary strengthening effect under tension along the TD and RD were compared by calculating the activation stress difference(△Stress)and the geometric compatibility factor(m′)between neighboring *** results indicate a higher grain boundary strengthening for TD-tension than that for RD-tension,which will lead to a higher yield strength along the *** is,the anisotropy of grain boundary strengthening between TD-tension and RD-tension also plays an important role in the in-plane anisotropy along the RD and ***,the reasons for why there is a grain-boundary-strengthening anisotropy along the TD and RD were discussed.

关键词： Zirconium Strengthening Grain boundary Orientation

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Preparation of activated ceria and its desulfurization performance

引用

International Journal of Minerals,Metallurgy and Materials 2015年第9期22卷 992-997页

作者： Qing-chun Yu Yong Deng Fei Wang Yue-bin Feng Xiu-min Chen Bin Yang Da-chun Liu National engineering laboratory for Vacuum Metallurgy Key Laboratory of Vacuum Metallurgy for Non-ferrous Metal of Yunnan Province State Key Laboratory of Complex Non-ferrous Metal Resources Clear Utilization Faculty of metallurgical and Energy engineering Kunming University of Science and Technology Faculty of science Kunming University of Science and Technology

Activated ceria （CeO2/γ-Al2O3） prepared by impregnation was characterized by X-ray diffraction （XRD）, scanning electron microscopy （SEM）, and hydrogen temperature-programmed reduction （TPR）. The desulfurization of the activated ceria was investigated by X-ray photoelectron spectroscopy （XPS）, Fourier transform infrared spectroscopy （FT-IR）, and thermogravimetric analysis （TG）. The results showed that ceria could be highly dispersed or crystallized on the surface of γ-alumina. The reduction temperatures of 0.1CeO2/γ-Al2O3, 0.45CeO2/7-A1203, and CeO2 ranged from 250℃ to 470℃, 330℃ to 550℃, and 350℃ to 550℃, respectively. The reduction peak temperature of 0.45CeO2/γ-Al2O3 was higher than that of 0.1CeO2/γ-Al2O3, which was consistent with the reduction temperature of CeO2. 02 participated in the reaction between ceria and sulfur dioxide. The desulfurization product was cerium（III） sulfate. The intensity of the hydroxyl band decreased with the formation of sulfate species.

关键词： ceria alumina impregnation desulfiwization sulfur dioxide sulfates

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Synthesis of LaGaO_3-Based Electrolyte Material and Its Compatibility with Novel Electrode Materials

引用

Journal of Rare Earths 2005年第S1期23卷 214-218页

作者：刘荣辉马文会王华杨斌戴永年 Faculty of Materials and metallurgical engineering Kunming University of Science and Technology Kunming 650093 China Key Laboratory of Vacuum Metallurgy of Non-Ferrous metals of Yunnan Province Kunming University of Science and Technology Kunming 650093 China key laboratory of Vacuum Metallurgy of non-ferrous metals of Yunnan Province Kunming University of Science and Technology Kunming 650093 China Faculty of Materials and metallurgical engineering Kunming University of Science and Technology Kunming 650093 China

La_ 1-xSr_xGa_ 1-yMg_yO_ 3-δ(LSGM)electrolyte material was synthesized by solid-state reaction method. The microstructure characteristics were tested via X-ray diffraction(XRD), scanning electron microcopy (SEM), and energy dispersive spectroscopy (EDS). XRD patterns indicate that perovskite phase began to form when the mixed materials were sintered at 1000 ℃, and the material has a pure LSGM perovskite phase when the mixed materials were sintered at 1450 ℃ in air for 24 h. No chemical reaction between LSGM electrolyte material and La_ 1-xSr_xMn_ 1-yCr_yO_ 3-δ(LSMC) anode material or La_ 1-xSr_xFe_ 1-yCo_yO_ 3-δ (LSFC) cathode material was detected after the mixed materials consisting of LSGM and LSMC or LSFC was sintered at 1200 ℃ in air for 15 h respectively, which shows that LSGM electrolyte material has excellent chemical compatibility with LSMC anode and LSFC cathode materials. According to SEM, LSMC anode film and cathode composite film of LSFC and LSMC prepared using direct painting method by sintering at 1150 ℃ are both porous and well cohered on LSGM electrolyte substrate.

关键词： solid-state reaction La_ 1-xSr_xGa_ 1-yMg_yO_ 3-δ chemical and thermodynamic compatibility

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Comparison of desulfurization kinetics of copper oxide sorbent

引用

Journal of Central South University 2015年第8期22卷 2902-2908页

作者：郁青春邓勇王飞冯跃斌杨斌徐宝强刘大春 National engineering laboratory for Vacuum Metallurgy Key Laboratory of Vacuum Metallurgy for Non-ferrous Metal of Yunnan ProvinceState Key Laboratory of Complex Non-ferrous Metal Resources Clear Utilization Faculty of metallurgical and Energy engineering Kunming University of Science and Technology Faculty of science Kunming University of Science and Technology

Desulfurization experiments of CuO, γ-Al2O3 and CuO/γ-Al2O3 were made in simulated flue gas by means of thermogravimetric analysis. It is found that reaction activities of CuO supported on γ-Al2O3 could be highly improved. Desulfurization kinetics of CuO/γ-Al2O3 was studied in the temperature range of 250 °C-400 °C and SO2 concentration of 0.1%-0.9%. The experimental data were tested and compared with kinetics models of volume reaction model(VRM), grain size model(GSM), random pore model(RPM) and pore-blocking model(PBM). Correlation analysis shows that VRM and RPM models do not fit experimental data well. GSM contradicts with the changes in the physical and chemical properties of Cu O/γ-Al2O3 as the desulfurization proceeds. It is found that PBM is consistent with the change of pore structure of CuO/γ-Al2O3 sorbent during desulfurization process and predicts the conversion-time curves of the sorbent well. Meanwhile, kinetics parameters are obtained and discussed.

关键词： copper oxide desulfurization kinetics γ-Al2O3

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Ferronickel preparation using Ni-Fe co-deposition process

引用

Journal of Central South University 2016年第12期23卷 3072-3078页

作者：王飞李磊邱士伟王华 State key laboratory of Complex non-ferrous Metal Resources Clean Utilization Engineering Research Center of Metallurgical Energy Conservation and Emission Reduction of Ministry of EducationFaculty of Metallurgical and Energy EngineeringKunming University of Science and Technology

Nucleation mechanism and technological process for Ni-Fe co-deposition with a relatively high Fe^(2+)concentration surrounded were described,and the effects of Fe^(2+) concentration,solution pH,temperature,and sodium dodecyl sulfonate concentration were *** experiments demonstrate that iron's electrodeposition plays a leading role in the Ni-Fe co-deposition process,and the co-deposition nucleation mechanism accords with a progressive *** increase does favor in increasing nickel content in the ferronickel(Ni-Fe co-deposition products),while Fe^(2+) concentration increase does *** solution pH is higher than 3.5,nickel content in the ferronickel decreases with pH because of the hydrolysis of Fe^(2+).With the current density of 180 A/m^2,Na_2SO_4 concentration of 100 g/L and Ni^(2+) concentration of 60 g/L,a smooth ferronickel deposit containing 96.21% Ni can be obtained under the conditions of temperature of 60 °C,Fe^(2+) concentration of 0.3 g/L,solution pH of 3 and sodium dodecyl sulfonate concentration of 40 mg/L.

关键词： Fe concentration surrounded waste regenerationNi-Fe co-deposition nucleation mechanism high 2+

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Environmental and energy gains from using molten magnesium–sodium–potassium chlorides for electro-metallisation of refractory metal oxides

引用

Progress in Natural science:Materials International 2015年第6期25卷 650-653页

作者： Wei Li Yating Yuan Xianbo Jin Hualin Chen George Z.Chen College of Chemistry and Molecular sciences Hubei Key Laboratory of Electrochemical Power SourcesWuhan University Department of Rare metals State Key Laboratory for Separation and Comprehensive Utilization of Rare MetalsGuangdong Key Laboratory for Development and Application of Rare EarthsGuangzhou Research Institute of Non-ferrous Metals Department of Chemical and Environmental engineering Faculty of EngineeringUniversity of Nottingham

The molten eutectic mixture of magnesium,sodium and potassium chlorides(Mg Cl2–Na Cl–KCl) has inappreciable solubility for oxide ions,and can help disengage a carbon anode from the oxide ions generated at a metal oxide cathode,and effectively avoid carbon dioxide *** "disengaging strategy" was successfully demonstrated in electro-reduction of solid oxides of zirconium and *** has led to significantly higher current efficiency(93%),and lower energy consumption(1.4 k W h kg 1) in electrolysis of tantalum oxide to tantalum metal compared to the conventional electrolysis in molten calcium chloride(e.g.78% and 2.4 k W h/kg-Ta).

关键词： Electrometallisation Molten salt Tantalum Electro-reduction Magnesium chloride

来源：

同方期刊数据库评论

在线全文

同方期刊数据库

学校读者我要写书评

暂无评论

欢迎您,

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

请选择保存的检索档案：

请选择收藏分类：

通借通还

欢迎您,

建议与咨询 留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

请选择保存的检索档案： 新增检索档案 确定 取消

请选择收藏分类： 新增自定义分类 确定 取消

通借通还

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

请选择保存的检索档案：

请选择收藏分类：