检索结果-南通市图书馆

Journal of Energy Chemistry 2025年第1期100卷 26-38页

作者： Xiaodong Yang Haochen Shen Xiaoming Xiao Zhichao Li Qi Zhou Wei Yang Bin Jiang Yongli Sun Luhong Zhang Zhenhua Yan School of Chemical Engineering and Technology Tianjin University key laboratory of advanced Energy materials Chemistry (ministry of education) Nankai University

This study presents a novel method to fabricate metal-decorated,sulfur-doped layered double hydroxides （M/SLDH） through spontaneous redox and sulfurization *** developed Ag/SLDH and Pt/SLDH catalysts with abundant heterogeneous interfaces and hierarchical nanostructures demonstrated outstanding oxygen evolution reaction （OER） and hydrogen evolution reaction （HER） performance,achieving low overpotentials of 212 and 35 mV at 10 mA cm-2in 1 M KOH,*** both anode and cathode in water splitting,they required only 1.47 V to reach 10 mA cm-2and exhibited high structural robustness,maintaining stability at 1000 mA cm-2for 300 ***-situ Raman analysis revealed that the synergistic effects of metal nanoparticles and S doping significantly promote the transformation into the S-Co1-xFexOOH layer,which serves as the active phase for water ***,ultraviolet photoelectron spectroscopy （UPS） and density functional theory （DFT） analyses indicated that incorporating metal nanoparticles and S doping increase electron density near the Fermi level and reduce reaction energy barriers,thus enhancing intrinsic OER and HER *** study provides a scalable strategy for synthesizing high-performance electrocatalysts for water splitting,with promising potential for broader applications.

关键词： Ultraviolet photoelectron spectroscopy

Defect Engineering with Rational Dopants Modulation for High‑Temperature Energy Harvesting in Lead‑Free Piezoceramics

在线全文

同方期刊数据库

学校读者我要写书评

暂无评论

Nano-Micro Letters 2025年第3期17卷 87-101页

作者： Kaibiao Xi Jianzhe Guo Mupeng Zheng Mankang Zhu Yudong Hou key laboratory of advanced Functional materials Ministry of EducationCollege of Materials Science and EngineeringBeijing University of TechnologyBeijing 100124People’s Republic of China

High temperature piezoelectric energy harvester(HTPEH)is an important solution to replace chemical battery to achieve independent power supply of HT wireless ***,simultaneously excellent performances,including high figure of merit(FOM),insulation resistivity(ρ)and depolarization temperature(Td)are indispensable but hard to achieve in lead-free piezoceramics,especially operating at 250°C has not been reported ***,well-balanced performances are achieved in BiFeO3–BaTiO3 ceramics via innovative defect engineering with respect to delicate manganese *** to the synergistic effect of enhancing electrostrictive coefficient by polarization configuration optimization,regulating iron ion oxidation state by high valence manganese ion and stabilizing domain orientation by defect dipole,comprehensive excellent electrical performances(Td=340°C,ρ250°C>10^(7)Ωcm and FOM_(250°C)=4905×10^(–15)m^(2)N^(−1))are realized at the solid solubility limit of manganese *** HT-PEHs assembled using the rationally designed piezoceramic can allow for fast charging of commercial electrolytic capacitor at 250°C with high energy conversion efficiency(η=11.43%).These characteristics demonstrate that defect engineering tailored BF-BT can satisfy high-end HT-PEHs requirements,paving a new way in developing selfpowered wireless sensors working in HT environments.

关键词： Lead-free piezoceramic Defect engineering Dopants modulation High-temperature Piezoelectric energy harvester

Design of a cationic accelerator enabling ultrafast ion diffusion kinetics in aqueous zinc-ion batteries

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Journal of Energy Chemistry 2025年第1期100卷 377-384页

作者： Yawei Xiao Qianqian Gu Haoyu Li Mengyao Li Yude Wang National Center for International Research on Photoelectric and Energy materials School of Materials and Energy Yunnan University key laboratory of ministry of education for advanced materials in Tropical Island Resources School of Chemistry and Chemical Engineering Hainan University College of Chemical Engineering Fuzhou University Yunnan key laboratory of Carbon Neutrality and Green Low-carbon technologies Yunnan University

Aqueous zinc-ion batteries are highly favored for grid-level energy storage owing to their low cost and high safety,but their practical application is limited by slow ion *** address this,a strategy has been developed to create a cation-accelerating electric field on the surface of the cathode to achieve ultrafast Zn2+diffusion *** employing electrodeposition to coat MoS2on the surface of BaV6O16·3H2O nanowires,the directional built-in electric field generated at the heterointerface acts as a cation accelerator,continuously accelerating Zn2+diffusion into the active *** optimized Zn2+diffusion coefficient in CC@BaV-6O16·3H2O@MoS2(7.5×10～8cm2s-1) surpasses that of most reported V-based ***,MoS2serving as a cathodic armor extends the cycling life of the Zn-CC@BaV6O16·3H2O@MoS2full batteries to over 10000 *** work provides valuable insights into optimizing ion diffusion kinetics for high-performance energy storage devices.

关键词： Zinc alloys

Rational modulation of fluorophosphate cathode by anionic groups to reduce the polarization behavior for fast-charging sodium-ion batteries

在线全文

同方期刊数据库

学校读者我要写书评

暂无评论

Journal of Energy Chemistry 2025年第1期100卷 509-521页

作者： Xinyuan Wang Fan Zhang Xingyu Zhou Qian Wang Changyu Liu Yangyang Liu Hui Wang Xiaojie Liu key laboratory of Synthetic and Natural Functional Molecule of the ministry of education College of Chemistry & Materials Science Northwest University

Na3V2（PO4）2O2F （VP） is recognized as a promising cathode material for sodium-ion batteries due to its stable structural framework and high specific *** functional theory （DFT） and finite element simulations show that incorporating SO42-into VP decreases its band gap,lowers the migration energy barrier,and ensures a uniform Na+concentration gradient and stress distribution during charge and discharge ***,the average Na+diffusion coefficient of Na3V2（PO4）1.95（SO4）0.05O2F（VPS-1） is roughly double that of VP,leading to enhanced rate capability (80 C,75.5 mAh g-1) and cycling stability (111.0 mAh g-1capacity after 1000 cycles at 10 C current density) for ***-1 exhibits outstanding fast-charging capabilities,achieving an 80%state of charge in just 8.1 *** assembled VPS-1//SbSn/NPC full cell demonstrated stable cycling over 200 cycles at a high 5 C current,maintaining an average coulombic efficiency of 95.35%.

关键词： Anionic group modulation Polarization behavior Fast-charging Sodium-ion battery Fluorophosphate Cathode

Ideal Bi‑Based Hybrid Anode Material for Ultrafast Charging of Sodium‑Ion Batteries at Extremely Low Temperatures

在线全文

同方期刊数据库

学校读者我要写书评

暂无评论

Nano-Micro Letters 2025年第3期17卷 152-167页

作者： Jie Bai Jian Hui Jia Yu Wang Chun Cheng Yang Qing Jiang key laboratory of Automobile materials(Jilin University) Ministry of EducationSchool of Materials Science and EngineeringJilin UniversityChangchun 130022People’s Republic of China

Sodium-ion batteries have emerged as competitive substitutes for low-temperature applications due to severe capacity loss and safety concerns of lithium-ion batteries at−20°C or ***,the key capability of ultrafast charging at ultralow temperature for SIBs is rarely ***,a hybrid of Bi nanoparticles embedded in carbon nanorods is demonstrated as an ideal material to address this issue,which is synthesized via a high temperature shock *** a hybrid shows an unprecedented rate performance(237.9 mAh g^(−1)at 2 A g^(−1))at−60℃,outperforming all reported SIB anode *** with a Na_(3)V_(2)(PO_(4))_(3)cathode,the energy density of the full cell can reach to 181.9 Wh kg^(−1)at−40°*** on this work,a novel strategy of high-rate activation is proposed to enhance performances of Bi-based materials in cryogenic conditions by creating new active sites for interfacial reaction under large current.

关键词： Bi nanoparticles High temperature shock High-rate activation Ultrafast charging Low-temperature sodium-ion batteries

Staged dendrite suppression for high safe and stable lithium-sulfur batteries

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Journal of Energy Chemistry 2025年第1期100卷 674-683页

作者： Jun Jiang Zhenjie Lu Yanwen Ding Shujun Liu Zhijie Qi Tian Tang Yunfan Zhang Zhiyuan Ma Jingwen Sun Liang Xue Wenyao Zhang Pan Xiong Xin Wang Junwu Zhu Yongsheng Fu key laboratory for Soft Chemistry and Functional materials of ministry of education Nanjing University of Science and Technology Jiangsu Pylon Battery Co.Ltd

The unavoidable dendrite growth and shuttle effect have long been stranglehold challenges limiting the safety and practicality of lithium-sulfur ***,we propose a dual-action strategy to address the lithium dendrite issue in stages by constructing a multifunctional surface-negatively-charged nanodiamond layer with high ductility and robust puncture resistance on polypropylene （PP） *** uniformly loaded compact negative layer can not only significantly enhance electron transmission efficiency and promote uniform lithium deposition,but also reduce the formation of dendrite during early deposition *** importantly,under the strong puncture stress encountered during the deterioration of lithium dendrite growth under limiting current,the high ductility and robust puncture resistance（145.88 MPa） of as-obtained nanodiamond layer can effectively prevent short circuits caused by unavoidable lithium *** Li||Li symmetrical cells assembled with nanodiamond layer modified PP demonstrated a stable cycle of over 1000 h at 2 mA cm-2with a polarization voltage of only 29.3 ***,the negative charged layer serves as a physical barrier blocking lithium polysulfide ions,effectively mitigating capacity *** improved cells achieved a capacity decay of only 0.042%per cycle after 700 cycles at 3 C,demonstrating effective suppression of dendrite growth and capacity attenuation,showing promising prospect.

关键词： Ductility

Nanostructured ZnO/BiVO_(4)I-scheme heterojunctions for piezocatalytic degradation of organic dyes via harvesting ultrasonic vibration energy

在线全文

同方期刊数据库

学校读者我要写书评

暂无评论

International Journal of Minerals,Metallurgy and materials 2025年第2期32卷 488-497页

作者： Yiling Li Xiaoyao Yu Yingjie Zhou Yao Lin Ying Wu key laboratory of the ministry of education for advanced Catalysis materials College of Chemistry and Materials ScienceZhejiang Normal UniversityJinhua 321004China

BiVO_(4)porous spheres modified by ZnO were designed and synthesized using a facile two-step *** resulting ZnO/BiVO_(4)composite catalysts have shown remarkable efficiency as piezoelectric catalysts for degrading Rhodamine B(RhB)unde mechanical vibrations,they exhibit superior activity compared to pure *** 40wt%ZnO/BiVO_(4)heterojunction composite displayed the highest activity,along with good stability and *** enhanced piezoelectric catalytic activity can be attributed to the form ation of an I-scheme heterojunction structure,which can effectively inhibit the electron-hole ***,hole(h+)and superoxide radical(·O_(2)^(-))are proved to be the primary active ***,ZnO/BiVO_(4)stands as an efficient and stable piezoelectric catalyst with broad potential application in the field of environmental water pollution treatment.

关键词： piezoelectric catalytic heterojunction dye degradation ultrasonic vibration

维普期刊数据库

Identifying the dynamic behaviors in complete reconstruction of Co-based complex precatalysts during electrocatalytic oxygen evolution

在线全文

学校读者我要写书评

暂无评论

Journal of Energy Chemistry 2025年第1期100卷 226-233页

作者： Jingfang Zhang Danyang Wu Linke Cai Youluan Lu Fanpeng Cheng Lijuan Shi Qun Yi Yao Liu Yi Huang key laboratory of Green Chemical Engineering Process of ministry of education Engineering Research Center of Phosphorus Resources Development and Utilization of Ministry of Education Hubei Key Laboratory of Novel Reactor and Green Chemical Technology School of Chemical Engineering & Pharmacy Wuhan Institute of Technology key laboratory of Pesticide & Chemical Biology of ministry of education Engineering Research Center of Photoenergy Utilization for Pollution Control and Carbon Reduction of Ministry of Education College of Chemistry Central China Normal University College of materials Science and Engineering Fuzhou University

Transition metal-based nanomaterials have emerged as promising electrocatalysts for oxygen evolution reaction（OER）. Considerable research efforts have shown that self-reconstruction occurs on these nanomaterials under operating conditions of OER process. However, most of them undergo incomplete reconstruction with limited thickness of reconstruction layer, leading to low component utilization and arduous exploration of real catalytic mechanism. Herein, we identify the dynamic behaviors in complete reconstruction of Co-based complexes during OER. The hollow phytic acid（PA） cross-linked CoFe-based complex nanoboxes with porous nanowalls are designed because of their good electrolyte penetration and mass transport ability, in favor of the fast and complete reconstruction. A series of experiment characterizations demonstrate that the reconstruction process includes the fast substitution of PA by OH-to form Co（Fe）(OH)xand subsequent potential-driven oxidation to Co（Fe）OOH. The obtained CoFeOOH delivers a low overpotential of 290 mV at a current density of 10 mA cm-2and a long-term *** experiment results together with theory calculations reveal that the Fe incorporation can result in the electron rearrangement of reconstructed CoFeOOH and optimization of their electronic structure,accounting for the enhanced OER activity. The work provides new insights into complete reconstruction of metal-based complexes during OER and offers guidelines for rational design of high-performance electrocatalysts.

关键词： Oxygen evolution reaction

Near-perfect replication on amorphous alloys through active force modulation based on machine learning/neural network parameter prediction

在线全文

同方期刊数据库

学校读者我要写书评

暂无评论

Science China(Physics,Mechanics & Astronomy) 2025年第1期Mechanics & Astronomy) .卷 181-191页

作者： Senkuan Meng Zheng Wang Ruisong Zhu Ruijie Liu Jiang Ma Lina Hu Weihua Wang key laboratory for Liquid-Solid Structural Evolution and Processing of materials (ministry of education) School of Materials Science and Engineering Shandong University College of Mechatronics and Control Engineering Shenzhen University Songshan Lake materials laboratory Institute of Physics Chinese Academy of Sciences

As a microforming technique, micro/nano-structural replication possesses advantages of high precision and efficiency. With the remarkable superplasticity in the supercooled liquid region, amorphous alloys or metallic glasses(MGs) are regarded as ideal materials for miniature fabrication. However, due to the intrinsic metastable nature of supercooled liquids, the design of imprinting processes for MGs poses a challenge. In the past, process parameters have largely relied on trial-and-error *** this work, a low-frequency active force modulation system is employed to apply a stable, precise, and real-time feedback stress field for imprinting of MG samples. Low-frequency vibrations can facilitate the filling of microstructures on the template surface by reducing the effective viscosity of the supercooled liquid. With the dataset composed of orthogonal experiments, a machine learning strategy based on back-propagation(BP) neural networks was utilized to construct a 3D parameter space for temperature, stress, and time, and to predict the corresponding filling ratio. Furthermore, the optimal combination of imprinting process parameters was identified, and its filling ratio was experimentally validated to reach as high as 0.94. The near-perfect replication of microstructures confirms the superiority of the active force modulation system and the data-driven strategy of machine learning-assisted parameter design. At the same time, this one-step microforming process provides a new approach to addressing the accuracy-cost trade-off dilemma in precision manufacturing.

关键词： metallic glass amorphous alloy microforming imprinting machine learning

A mild, configurable, flexible CoNi-LDH（v）/Zn battery based on H-vacancy-induced reversible Zn2+ intercalation

在线全文

同方期刊数据库

学校读者我要写书评

暂无评论

Journal of Energy Chemistry 2025年第1期100卷 498-508页

作者： Xinyue Cheng Dingsheng Wu Hao Gao Qingqing Wang Pengfei Lv Sam S.Yoon Qufu Wei key laboratory of Eco-textiles Ministry of Education Jiangnan University School of Mechanical Engineering Korea University

Flexible Zn-based batteries have attracted increasing research interest as essential components of wearable energy storage ***,the advancement of flexible aqueous Zn-based batteries based on Co-Ni layered double hydroxide （CoNi-LDH） as the cathode material is hampered by their poor cycling stability and the corrosiveness of alkaline ***,CoNi-LDH nanosheets enriched with H vacancies (CoNi-LDH（v）) were constructed on a flexible carbon cloth （CC） substrate via electrochemical deposition and *** Zn-based battery comprising CoNi-LDH（v）@CC as the cathode exhibited highly reversible conversion reactions and stable operation in 3 M ZnSO4electrolyte （pH=4）.The battery delivered an excellent specific capacity (225 mA h g-1,0.26 mA h cm-2),acceptable cycling stability（53.9%,900 cycles）,and high discharging *** abundant H vacancies served as active sites for the reversible intercalation of Zn2+and the extravasation of NO3-generated channels and space for Zn2+transport and storage,together enabling an excellent Zn2+storage ***,a sandwich-structured solid-state CoNi-LDH（v）@CC//Zn@CC battery was fabricated and was found to exhibit a noteworthy electrochemical performance and mechanical *** a proof of concept,the unencapsulated battery powered a digital watch under various deformation conditions and operated stably for 80 ***,the flexible battery displayed outstanding customizability,maintaining an open-circuit voltage of 1.42 V even after being cut *** proposed engineering strategy contributes to the realization of textiles with truly wearable energy-storage devices.

关键词： CoNi/Zn battery H vacancies Mild aqueous electrolyte Tailorable battery Wearable energy storage device