检索结果-南通市图书馆

Experimental Study on Diesel Spray and Flame Asymmetry Characteristics of Dual-Orifice Nozzles for a Medium-Speed Engine

引用

Journal of thermal science 2025年第1期34卷 303-322页

作者： JU Dehao LIU Rui ZHENG Liang DENG Jiahui ZHANG Wenzheng HUO Jinlu HUANG Li Shanghai Marine Diesel Engine Research Institute National key laboratory of Marine Engine science and Technology key laboratory for power Machinery and engineering Ministry of EducationShanghai Jiao Tong University

The asymmetry of the multi-orifice spray will cause uneven heat load of the marine diesel engine,thereby affecting its working performance and service ***,an in-depth understanding of the spray and flame characteristics of multi-orifice nozzles will guide the optimization of the nozzle structure,needle design and diesel atomization and combustion *** this reason,four groups of dual-orifice nozzles with different hole diameters(0.1-0.55 mm) and mass flow rates covering the typical marine medium-speed diesel injections are designed and customized,and the constant volume chamber(CVC) with high temperature and pressure is used to simulate the actual in-cylinder working conditions of the diesel engine for the spray visualization *** study the asymmetry of the fuel sprays discharged from a diesel injector,the multi-orifice nozzle is simplified as a dual-orifice nozzle in this *** with X-ray Computed Tomography(CT) imaging technology,the influences of the nozzle internal structure on the spray and flame asymmetry are studied in the constructed supercritical *** is found that the asymmetry of the inlet angle and the equivalent length-diameter ratio is positively correlated with the inconsistency of the dual *** an increase in the injection pressure and nozzle diameter,the asymmetry of the dual spray becomes more pronounced,resulting in greater disparities in the ignition delay times and ignition positions of the two ***,the increase in nozzle diameter also leads to combustion instability,resulting in a flame with a serrated *** the increase of ambient temperature,the proportion of liquid phase in the jet decreases and the relative density of spray front decreases.

关键词： atomization dual-orifice nozzle nozzle structure spray flame asymmetry

来源：

同方期刊数据库评论

在线全文

同方期刊数据库

学校读者我要写书评

暂无评论

Numerical Simulation of Radiation Transport to Improve Microalgae Cultivation in an Air-Lift Photobioreactor

引用

Journal of thermal science 2025年第1期34卷 62-76页

作者： ZHANG Xianbin LI Mingjia HUNG Tzuchen ZHANG Zixun key laboratory of Thermo-Fluid science and engineering of ministry of education School of Energy and Power EngineeringXi'an Jiaotong University School of Mechanical engineering Beijing Institute of Technology Department of Mechanical engineering Taipei University of Technology

A comprehensive numerical model is developed to simulate the growth of microalgae under light/dark cycling *** purpose of this study is to predict the growth rate of Chlorella vulgaris cultivated in photobioreactors(PBRs) in order to improve the light conditions for microalgae and enhance the photosynthetic *** fluid dynamics(CFD) is used to simulate its internal hydrodynamic *** Lagrangian method is employed to track the movement of microalgae *** radiative transfer equation(RTE)is used to obtain light intensity *** combination of light radiation field and microalgae cell motions is used to construct the light history and they are integrated into the model of the photosynthetic units(PSU) to calculate the microalgae growth *** numerical results demonstrate that enhanced light/dark cycling frequency with ordered mixing can promote efficient microalgae *** effect of the vortex flow field generated by the baffles in an air-lift PBR is analyzed for increasing microalgae growth *** using the 1:1 baffle spacing,the biomass production of microalgae is increased by 41.8% compared to the original PBR.

关键词： light distribution particle tracking photobioreactor structure optimization

来源：

同方期刊数据库评论

在线全文

同方期刊数据库

学校读者我要写书评

暂无评论

Buried interface bridging for inverted cesium-formamidinium triiodide perovskite solar cells with long operational stability

引用

science China Chemistry 2025年第1期68卷 163-173页

作者： Chenhui Zhang Chunjun Liang Fulin Sun Ting Zhu Xinghai Huang Yuzhu Guo Xinyu Guo Kunyang Ge Dan Li Fangtian You Zhiqun He key laboratory of Luminescence and Optical Information Ministry of Education Institute of Optoelectronic TechnologyBeijing Jiaotong University Department of Physics School of Physical Science and Engineering Beijing Jiaotong University

In the field of perovskite solar cells(PSCs), the research on defects in the buried interface has been relatively limited due to its non-exposure; however, this interface significantly impacts the performance enhancement of inverted PSCs. This study employs phenylethylammonium chloride(PEACl) molecules as a buffer layer to modify the buried interface of p-i-n structured PSCs,aiming to enhance the uniformity of self-assembled monolayers(SAMs) and facilitate the uniform nucleation and growth of perovskite films on the substrate. Furthermore, the introduction of the PEACl buffer layer effectively passivates defects at the bottom of the perovskite layer and notably enhances the crystal quality of the perovskite film by mitigating residual stress,thereby reducing nonradiative recombination loss. Following these optimizations, the MA-free PSCs treated with PEACl achieve a power conversion efficiency(PCE) of 24.11%, with significant improvements in storage, thermal stability, and operational stability. Particularly noteworthy is the device's performance in an unencapsulated state, whereas after 1,500 hours of continuous light operation stability testing, it retains 97% of its original efficiency. This study not only enriches the systematic understanding of the characteristics of the buried interface in PSCs but also contributes significantly to advancing the commercial production of perovskite photovoltaic technology.

关键词： defect-induced recombination buried interfaces inverted perovskite solar cells crystallization lattice mismatch

来源：

同方期刊数据库评论

在线全文

同方期刊数据库

学校读者我要写书评

暂无评论

Experimental Research on a Feasible Building Insulation Material Based Reed in China

引用

Journal of thermal science 2025年第1期34卷 176-187页

作者： LIU Tiantian PENG Yizhe LIU Lifang CAI Chenghan WANG Shuang LI Hongqiang College of Civil engineering Hunan University College of Civil engineering Hunan University of Science and Technology School of Energy and power Jiangsu University of Science and Technology National Center for International Research Collaboration in Building Safety and Environment (NCIRCBSE) Hunan University key laboratory of Building Safety and Energy Efficiency of the ministry of education Hunan University

The seemingly useless reeds are prepared as thermal insulation materials,which not only meet the requirements of environmental sustainability but also enhance the added value of reeds,creating new economic *** hydrophobicity of raw biomass surfaces leads to problems such as weak bonding strength and non-dense structure in the formed materials,as well as issues related to the residual insect infestations on the *** this study,reed straw was used as the raw material,and foamed geopolymer was used as the binder to prepare building insulation materials based *** improve the interfacial adhesion performance between reed straw and foamed geopolymer,a thermochemical modification method-thermal carbonization,was *** this study,the mechanical properties and hydraulic properties of the studied materials with different degrees of surface thermal modification were tested,especially the fire resistance performance,and weathering resistance performance rarely found in published *** the surface thermal modification condition of reed straw was 250℃（30 min）,the comprehensive performance of reed-based building insulation materials was the best,when the studied material density was 321.3 kg/m3;the compressive strength was 0.59 MPa;the thermal conductivity was 0.101 W/（m·K）;the pH was 11.27;the moisture absorption rate was 25.1%,and the compressive strength loss rate in wet-dry cycles was 18.5%.In addition,it had excellent fire resistance performance and weathering resistance *** new material can be widely used to improve the thermal insulation of traditional buildings and as sandwich filler in prefabricated buildings,such as preparing insulating walls.

关键词： building insulation material based reed fire resistance performance interface adhesion properties pre-treatment of reeds weathering resistance performance

来源：

同方期刊数据库评论

在线全文

同方期刊数据库

学校读者我要写书评

暂无评论

Development of a general circumferentially nonuniform heat transfer fuel rod model for subchannel analysis and application to helical fuel rods

引用

science China Technological sciences 2025年

作者： Junsen FU Junlong LI Xiaowen WANG Qi ZHANG Yao XIAO Hanyang GU School of Mechanical engineering Shanghai Jiao Tong University key laboratory of Nuclear power Systems and Equipment of the ministry of education Shanghai Jiao Tong University National key laboratory of Nuclear Reactor Technology Nuclear Power Institute of China State key laboratory of Nuclear power Safety Technology and Equipment Shanghai Jiao Tong University

The subchannel analysis method is one of the most crucial transient safety analysis methods in the thermal design of nuclear reactors. The nonuniformity of circumferential heat transfer is slight in conventional pressurized water reactor (PWR)cores, but it is significant in advanced reactors with wire-wrapped or helical fuel rods. Predicting circumferentially nonuniform heat transfer behavior can be challenging owing to the complex geometry of helical fuel rods. In this study, a general circumferentially nonuniform heat transfer fuel rod (GCNF) model is developed to predict the fuel central temperature and circumferential heat flux and wall temperature. This model incorporates a refined two-dimensional fuel conduction model and circumferential nonuniform shape factor, addressing the dual factors contributing to the circumferential nonuniformity of helical fuel rods. An empirical correlation for the nonuniform shape factor is developed based on the computational fluid dynamics (CFD) results, and it is implemented to the subchannel code. The newly developed model is applied to a helical fuel annulus and validated by comparing the prediction results with CFD data. The maximum wall temperature predicted by the code is 1.15°C lower than the value calculated through CFD. In terms of the heat flux, the maximum value at the inner corner is22 kW lower than that obtained from the CFD prediction. The accurate prediction of circumferentially nonuniform heat transfer in helical fuel, concerning the surface heat flux and cladding temperature, addresses existing shortcomings in helical fuel subchannel analysis methods. Additionally, the capability to predict the fuel central temperature is essential for the safety analysis to determine whether fuel rods are melting. The generality of the model framework allows it to be used for the prediction of circumferential nonuniform heat transfer behavior in other types of fuel assemblies.

关键词：

来源：

同方期刊数据库评论

在线全文

同方期刊数据库

学校读者我要写书评

暂无评论

Three-dimensional fracture of UO2 ceramic pellets by phase field modeling

引用

science China(Physics,Mechanics & Astronomy) 2025年第1期Mechanics & Astronomy) .卷 169-180页

作者： Wei Xiong Xuan Ye Hongzhang Cheng Xiaoming Liu Institute of Nuclear and New Energy Technology Collaborative Innovation Center of Advanced Nuclear Energy Technology Key Laboratory of Advanced Reactor Engineering and Safety of Ministry of Education Tsinghua University State key laboratory of Nonlinear Mechanics Institute of Mechanics Chinese Academy of Sciences School of engineering science University of Chinese Academy of Sciences

Fracture is the primary failure type for the UO2ceramic pellets,which are operated under irradiation and thermal processes,and physically confined by the *** this work,by combining closely coupled physical processes of heat conduction,heat transfer,and mechanical deformation with the cohesive phase field framework,we proposed a high-precision modeling of quasistatic cracking of three-dimensional （3D） UO2ceramic fuel pellets under high temperature and *** simulation results agree well with the experimental results,indicating that the proposed method has the potential to capture 3D crack modes in the interested time ***,we studied the relation of the 3D fracture patterns of fuel pellets with the peak power *** was found that the power level plays a critical role in determining the competition between radial and circumferential cracks,as well as transverse penetrating cracks.

关键词： phase field method nuclear fuel pellet coupled thermo-mechanical model thermal fracture

来源：

同方期刊数据库评论

在线全文

同方期刊数据库

学校读者我要写书评

暂无评论

Flexible molecules dedicate to release strain of inverted inorganic perovskite solar cell

引用

Journal of Energy Chemistry 2025年第1期100卷 87-93页

作者： Hongrui Sun Sanlong Wang Pengyang Wang Yali Liu Shanshan Qi Biao Shi Ying Zhao Xiaodan Zhang Institute of Photoelectronic Thin Film Devices and Technology Renewable Energy Conversion and Storage Center State Key Laboratory of Photovoltaic Materials and CellsNankai University key laboratory of Photoelectronic Thin Film Devices and Technology of Tianjin Haihe laboratory of Sustainable Chemical Transformations engineering Research Center of Thin Film Photoelectronic Technology of ministry of education Collaborative Innovation Center of Chemical science and engineering (Tianjin)

The tensile strain in inorganic perovskite films induced by thermal annealing is one of the primary factors contributing to the inefficiency and instability of inorganic perovskite solar cells （IPSCs）,which reduces the defect formation ***,a flexible molecule 5-maleimidovaleric acid （5-MVA） was introduced as a strain buffer to release the residual strain of *** anhydride and carboxyl groups in 5-MVA interact strongly with the uncoordinated Pb2+through Lewis acid-base reaction,thus tightly“pull”the perovskite *** in-between soft carbon chain increased the structural flexibility of CsPbI2.85Br0.15perovskite materials,which effectively relieved the intrinsic internal strain of CsPbI2.85Br0.15,resisted the corrosion of external strain,and also reduced the formation of defects such as VIand *** addition,the introduction of 5-MVA improved crystal quality,passivated residual defects,and narrowed energy level ***,power conversion efficiency （PCE） of NiOxbased inverted IPSCs increased from 19.25% to 20.82% with the open-circuit voltage enhanced from 1.164 V to 1.230 *** release of strain also improved the stability of CsPbI2.85Br0.15perovskite films and devices.

关键词： Perovskite solar cells

来源：

同方期刊数据库评论

在线全文

同方期刊数据库

学校读者我要写书评

暂无评论

Gas-Solid Flow,Combustion Characteristics,and Gas Emissions in a 75 t/h CFB Boiler Based on the CPFD Method

引用

Journal of thermal science 2025年第1期34卷 323-336页

作者： HUANG Xiankun BAI Zhang ZHU Xiaoli WANG Shuoshuo MU Lin GONG Liang College of New Energy China University of Petroleum (East China) key laboratory of Ocean Energy Utilization and Energy Conservation of ministry of education School of Energy and Power EngineeringDalian University of Technology

A 3D simulation using Computational Particle Fluid Dynamics（CPFD） methods was used to calculate coal combustion in a 75 t/h industrial-scale circulating fluidized bed（CFB） *** characteristics,gas-solid flow characteristics,and gaseous pollutant emissions of CFB boilers from combustion ignition to stable operation were systematically evaluated in this *** show that the temperature distribution is relatively uniform throughout the *** the combustion process unfolds within the boiler,the gas composition curve strikingly portrays the inverse correlation between CO2and *** the combustion reaction progresses,it becomes evident that the concentration of CO2progressively increases,while the concentration of O2concurrently *** inverse relationship underscores the fundamental combustion reaction,where carbon-based fuels react with oxygen to produce carbon dioxide and release ***,a comprehensive analysis has revealed that,from ignition to stable combustion,both nitric oxide（NO） and sulfur dioxide（SO2） emissions exhibit a declining *** reduction in pollutant generation is attributed to the improvement in combustion *** complete combustion leads to lower levels of unburned hydrocarbons,which are prone to NO ***,the sulfur content in the fuel is more efficiently oxidized to sulfur trioxide（SO3） or bound in sulfates,reducing *** steady state in the simulation,the SO2mass flow rate varies significantly with the furnace height,gradually increasing from 0.07 kg·s-1at 4 m at the bottom of the furnace to a peak of 0.078 kg·s-1at 8 m in the center,and then decreasing to 0.06 kg·s-1at 20m at the top of the furnace.

关键词： Sulfur dioxide

来源：

同方期刊数据库评论

在线全文

同方期刊数据库

学校读者我要写书评

暂无评论

Effect of inlet rotating swirl on endwall film cooling for two representative hole arrangements

引用

Chinese Journal of Aeronautics 2018年第5期31卷 1095-1108页

作者： Yang ZHOU Yang ZHANG Xinrong SU Xin YUAN key laboratory for thermal science and power engineering of ministry of education Tsinghua University

The swirl generator is widely used in lean-burn combustor to guarantee flame stability and reduce NOxemissions. Thus, the non-uniformities induced by the swirler would affect and damage film-cooling effectiveness on the turbine components, even blow-off coolant coverage, to some certain extent. The arrangement of film-cooling holes was normally designed to be perpendicular to the axial direction and in standard straight row. In this work we experimentally studied the effects of inlet swirl and mass flow ratio on traditional film cooling holes arrangement and a new arrangement pattern whose holes are located along the isobars. Results indicated that the swirl perturbation would damage film coverage. The film-cooling effect of endwall on which the holes are along the isobars, is invariably more promising than that of endwall on which hole arrangement is perpendicular to axial with the same mass flow of coolant, whether the inlet conditions is uniform or not.

关键词： Films-cooling Holes locating Isobaric Swirling flow Turbine design

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Turbine Endwall Film Cooling With Combustor-Turbine Interface Gap Leak- age Flow: Effect of Incidence Angle

引用

Journal of thermal science 2013年第2期22卷 135-144页

作者： ZHANG Yang YUAN Xin key laboratory for thermal science and power engineering of ministry of education Tsinghua University

This paper is focused on the film cooling performance of combustor-turbine leakage flow at off-design condition. The influence of incidence angle on film cooling effectiveness on first-stage vane endwall with combustor-turbine interface slot is studied. A baseline slot configuration is tested in a low speed four-blade cascade comprising a large-scale model of the GE-E 3 Nozzle Guide Vane (NGV). The slot has a forward expansion angle of 30 deg. to the endwall surface. The Reynolds number based on the axial chord and inlet velocity of the free-stream flow is 3.5 × 10 5 and the testing is done in a four-blade cascade with low Mach number condition (0.1 at the inlet). The blowing ratio of the coolant through the interface gap varies from M = 0.1 to M = 0.3, while the blowing ratio varies from M = 0.7 to M = 1.3 for the endwall film cooling holes. The film-cooling effectiveness distributions are obtained using the pressure sensitive paint (PSP) technique. The results show that with an increasing blowing ratio the film-cooling effectiveness increases on the endwall. As the incidence angle varies from i = +10 deg. to i = 10 deg., at low blowing ratio, the averaged film-cooling effectiveness changes slightly near the leading edge suction side area. The case of i = +10 deg. has better film-cooling performance at the downstream part of this region where the axial chord is between 0.15 and 0.25. However, the disadvantage of positive incidence appears when the blowing ratio increases, especially at the upstream part of near suction side region where the axial chord is between 0 and 0.15. On the main passage endwall surface, as the incidence angle changes from i = +10 deg. to i = 10 deg., the averaged film-cooling effectiveness changes slightly and the negative incidence appears to be more effective for the downstream part film cooling of the endwall surface where the axial chord is between 0.6 and 0.8.

关键词： Film Cooling Endwall Pressure Sensitive Paint Leakage Flow

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

欢迎您,

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

请选择保存的检索档案：

请选择收藏分类：

通借通还

欢迎您,

建议与咨询 留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

请选择保存的检索档案： 新增检索档案 确定 取消

请选择收藏分类： 新增自定义分类 确定 取消

通借通还

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

请选择保存的检索档案：

请选择收藏分类：