检索结果-南通市图书馆

Selective core-shell doping enabling high performance 4.6 V-LiCoO2

Journal of Energy Chemistry 2024年第8期95卷 684-693页

作者： Yueming Xia Jianrui Feng Jinhui Li Yan Li Zhengfeng Zhang Xiaoqi Wang Jianli Shao Manling Sui Pengfei Yan Beijing key laboratory of Microstructure and Property of Solids College of Materials Science & Engineering Beijing University of Technology Petro China Research Institute of Petroleum exploration & Development State key laboratory of Explosion science and technology Beijing Institute of Technology

Constructing robust surface and bulk structure is the prerequisite for realizing high performance high voltage LiCoO2（LCO）.Herein,we manage to synthesize a surface Mg-doping and bulk Al-doping coreshell structured LCO,which demonstrates excellent cycling ***-cell shows 94.2% capacity retention after 100 cycles at 3.0-4.6 V（***/Li+） cycling,and no capacity decay after 300 cycles for fullcell test（3.0-4.55 V）.Based on comprehensive microanalysis and theoretical calculations,the degradation mechanisms and doping effects are systematically *** the undoped LCO,high voltage cycling induces severe interfacial and bulk degradations,where cracks,stripe defects,fatigue H2 phase,and spinel phase are identified in grain *** the doped LCO,Mg-doped surface shell can suppress the interfacial degradations,which not only stabilizes the surface structure by forming a thin rock-salt layer but also significantly improves the electronic conductivity,thus enabling superior rate *** Al-doping can suppress the lattice "breathing" effect and the detrimental H3 to H1-3 phase transition,which minimizes the internal strain and defects growth,maintaining the layered structure after prolonged *** theoretical calculations,this work deepens our understanding of the doping effects of Mg and Al,which is valuable in guiding the future material design of high voltage LCO.

关键词： Doping effect Electron microscopy Failure mechanism High-voltage LiCoO2 Lithium-ion battery

来源：

同方期刊数据库评论

在线全文

同方期刊数据库

学校读者我要写书评

暂无评论

Optical PAM-4/PAM-8 generation via dual-Raman process in Rydberg atoms

引用

Chinese Physics B 2024年第6期33卷 383-388页

作者：宋晓云尹政任冠宇韩明志杨艾红祁义红彭延东 Qingdao key laboratory of Terahertz technology College of Electronic and Information EngineeringShandong University of Science and TechnologyQingdao 266590China School of Physics East China University of Science and TechnologyShanghai 200237China MIIT key laboratory of Complex-field Intelligent exploration Beijing Institute of TechnologyBeijing 100081China

A scheme of optical four-level pulse amplitude modulation(PAM-4) is proposed based on dual-Raman process in Rydberg atoms. A probe field counter-propagates with a dual-Raman field which drives the ground and the excited states transition, respectively, and the Rydberg transition is driven by a microwave(MW) field. A gain peak appears in the probe transmission and is sensitive to the MW field strength. Optical PAM-4 can be achieved by encoding an MW signal and decoding the magnitude of a probe signal. Simulation results show that the differential nonlinearity and the integral nonlinearity of the proposed scheme can be reduced by 5 times and 6 times, respectively, compared with the counterparts of previous scheme, and the ratio of level separation mismatch is close to the ideal value 1. Moreover, the scheme is extended to optical PAM-8 signal, which may further improve the spectral efficiency.

关键词： Rydberg atoms PAM-4/PAM-8 dual-Raman process

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

A hybrid WUDT-NAFnet for simultaneous source data deblending

引用

Petroleum science 2024年第3期21卷 1649-1659页

作者： Chao-Fan Ke Shao-Huan Zu Jun-Xing Cao Xu-Dong Jiang Chao Li Xing-Ye Liu key laboratory of Earth exploration and Information technology of Ministry of Education Chengdu University of Technology State key laboratory of Oil and Gas Reservoir Geology and Exploitation Chengdu University of Technology College of Geophysics Chengdu University of Technology

Simultaneous source technology,which reduces seismic survey time and improves the quality of seismic data by firing more than one source with a narrow time interval,is compromised by the massive blended ***,deblending algorithms have been developed to separate this ***,deep learning(DL)has been proved its great potential in suppressing the *** most popular DL method employs neural network as a filter to attenuate the blended noise in an iterative estimation and subtraction framework(IESF).However,there are still amplitude distortion and blended noise residual problems,especially when dealing with weak signal submerged in strong *** address these problems,we propose a hybrid WUDT-NAFnet,which contains two *** first network is a wavelet based U-shape deblending transformer network(WUDTnet),incorporated into IESF as a robust regularization term to iteratively separate the blended *** second network is a nonlinear activate free network(NAFnet)designed to recover the event amplitude and further suppress the weak noise residual in *** the hybrid network,the blended noise can be separated purposefully and *** using synthetic and field seismic data demonstrate that the WUDTNAFnet outperforms traditional curvelet transform(CT)based method and the deblending transformer(DT)model in terms of ***,for field applications,the data augmentation method of bicubic interpolation is applied to mitigate the feature difference between synthetic and field ***,the trained network exhibits strong signal preservation ability in numerical field example without requiring additional training.

关键词： Simultaneous-source Deblending Deep learning Transformer

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Electronic structure engineering of single atomic sites by plasmoninduced hot electrons for highly efficient and selective photocatalysis

引用

Nano Research 2024年第8期17卷 6960-6967页

作者： Xiaoya Huang Xinyuan Li Akang Chen Hongfei Gu Shouyuan Li Tailei Hou Shuwen Zhu Shuang Yu Yin Song Jiatao Zhang Beijing key laboratory of Construction Tailorable Advanced Functional Materials and Green Applications MIIT Key Laboratory of Medical Molecule Science and Pharmaceutical EngineeringMOE Key Laboratory of Cluster ScienceSchool of Chemistry and Chemical EngineeringSchool of Materials Science and EngineeringBeijing Institute of TechnologyBeijing 100081China MIIT key laboratory of Complex-field Intelligent exploration School of Optics and PhotonicsBeijing Institute of TechnologyBeijing 100081China

Single atom(SA)catalysts have achieved great success on highly selective heterogeneous catalysis due to their abundant and homogeneous active *** electronic structures of these active sites,restrained by their localized coordination environments,significantly determine their catalytic performances,which are difficult to ***,we investigated the effect of localized surface plasmon resonance(LSPR)on engineering the electronic structures of single atomic ***,core–shell structures consisted of Au core and transition metal SAs loaded N-doped carbon(CN)shell were constructed,namely Au@M-SA/CN(M=Ni,Fe,and Co).It was demonstrated that plasmon-induced hot electrons originated from Au were directionally injected to the M-SAs under visible light irradiation,which significantly changed their electronic structures and meanwhile facilitated improved overall charge separation *** as-prepared Au@Ni-SA/CN exhibited highly efficient and selective photocatalytic CO_(2) reduction to CO performance,which is 20.8,17.5,and 6.9 times those of Au nanoparticles,Au@CN,and Ni-SA/CN,*** spectroscopy analysis and theoretical calculations confirmed that the plasmon enhanced Ni-SA/CN sites featured increased charge density for efficient intermediate activation,contributing to the superb photocatalytic *** work provides a new insight on plasmon and atomic site engineering for efficient and selective catalysis.

关键词： single atom catalysts plasmon enhancement coupling effect photocatalysis CO_(2) reduction

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Rock physical characteristics of deep dolomite under complex geological conditions: A case study of 4th Member of Sinian Dengying Formation in the Sichuan Basin, China

引用

Petroleum science 2024年第4期21卷 2370-2382页

作者： Chuang Li Shu-Xin Pan Hong-Bin Wang Ji-Xin Deng Jian-Guo Zhao Zhi Li Yu Zhang Northwest Branch of Research Institute of Petroleum exploration & Development Department of Geophysics and exploration College of Geophysics Chengdu University of Technology State key laboratory of Petroleum Resources and Engineering China University of Petroleum (Beijing)

The deep-ultra deep carbonate reservoir in China, commonly subjected to modification of multi-stage diagenesis, has extremely high heterogeneity. Conventional rock physics analysis cannot accurately identify the elastic responses of reservoir. Here, the rock physics properties of the dolomite from the 4th Member of the Sinian Dengying Formation are experimentally measured, and the change law of rock physics characteristics is investigated within the framework of the diagenetic processes by the analysis of the elastic and petrologic characteristics, pore structure, and sedimentary environments. The results show that the differentiated diagenesis results in different pore structure characteristics and microtexture characteristics of the rock. The microbial dolomite of the algal mound-grain beach facies is subjected to the contemporaneous microbial dolomitization and seepage-reflux dolomitization, penecontemporaneous selective dissolution, burial dolomitization, and hydrothermal dolomitization. The resultant crystalline dolomite is found with one main type of the dolomite crystal contact boundaries,and the dissolution pore is extensive development. The siliceous, muddy, and limy dolomite of the interbeach sea environment mainly experiences the weak capillary concentration dolomitization, intensive mechanical compaction-induced densification, and burial dolomitization. Such crystalline dolomite is observed with four types of contact boundaries, namely the dolomite contact, clay contact, quartz contact, and calcite contact boundaries, and porosity mostly attributed to residual primary inter-granular or crystalline pores. The samples with the same crystal boundary condition have consistent correlations between the compressional-and shear-wave velocities, and between the compressional-wave velocity and the velocity ratio. Additionally, the variation of the acoustic velocity with effective pressure and the intensity of pore-scale fluid-related dispersion are controlled by t

关键词： Deep-ultra deep carbonate reservoirs Rock physics properties Dolomite Seismic elastic properties Micro-crack Pore structure types

来源：

同方期刊数据库评论

在线全文

同方期刊数据库

学校读者我要写书评

暂无评论

Structural properties of residual carbon in coal gasification fine slag and their influence on flotation separation and resource utilization:A review

引用

International Journal of Minerals,Metallurgy and Materials 2024年第2期31卷 217-230页

作者： Rui Han Anning Zhou Ningning Zhang Kaiqiang Guo Mengyan Cheng Heng Chen Cuicui Li College of Chemistry and Chemical Engineering Xi’an University of Science and TechnologyXi’an 710054China key laboratory of Coal Resources exploration and Comprehensive Utilization Ministry of Natural Resources of ChinaXi’an 710021China

Coal gasification fine slag(FS)is a typical solid waste generated in coal *** current disposal methods of stockpil-ing and landfilling have caused serious soil and ecological *** recovery and the high-value utilization of residual carbon(RC)in FS are the keys to realizing the win-win situation of the coal chemical industry in terms of economic and environmental *** structural properties,such as pore,surface functional group,and microcrystalline structures,of RC in FS(FS-RC)not only affect the flotation recovery efficiency of FS-RC but also form the basis for the high-value utilization of *** this paper,the characteristics of FS-RC in terms of pore structure,surface functional groups,and microcrystalline structure are sorted out in accordance with gasification type and FS particle *** reasons for the formation of the special structural properties of FS-RC are analyzed,and their influence on the flotation separation and high-value utilization of FS-RC is *** methods based on the pore structural characterist-ics of FS-RC,such as ultrasonic pretreatment-pore-blocking flotation and pore breaking-flocculation flotation,are proposed to be the key development technologies for improving FS-RC recovery in the *** design of low-cost,low-dose collectors containing polar bonds based on the surface and microcrystalline structures of FS-RC is proposed to be an important breakthrough point for strengthening the flotation efficiency of FS-RC in the *** high-value utilization of FS should be based on the physicochemical structural proper-ties of FS-RC and should focus on the environmental impact of hazardous elements and the recyclability of chemical waste liquid to es-tablish an environmentally friendly utilization *** review is of great theoretical importance for the comprehensive understand-ing of the unique structural properties of FS-RC,the breakthrough of the technological bottleneck in the e

关键词： coal gasification fine slag residual carbon pore structure surface functional groups microcrystalline structure flotation sep-aration resource utilization

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Effective separation of coal gasification fine slag: Role of classification and ultrasonication in enhancing flotation

引用

International Journal of Mining science and technology 2024年第6期34卷 867-880页

作者： Rui Han Anning Zhou Ningning Zhang Zhen Li Mengyan Cheng Xiaoyi Chen Tianhao Nan College of Chemistry and Chemical Engineering Xi’an University of Science and TechnologyXi’an 710054China key laboratory of Coal Resources exploration and Comprehensive Utilization Ministry of Natural Resources of ChinaXi’an 710021China

Effective separation of residual carbon and ash is the basis for the resource utilization of coal gasification fine slag(CGFS).The conventional flotation process of CGFS has the bottlenecks of low carbon recovery and high collector *** order to address these issues,CGFS sample taken from Shaanxi,China was used as the study object in this paper.A new process of size classification-fine grain ultrasonic pretreatment flotation(SC-FGUF)was proposed and its separation effect was compared with that of wholegrain flotation(WGF)as well as size classification-fine grain flotation(SC-FGF).The mechanism of its enhanced separation effect was revealed through flotation kinetic fitting,flotation flow foam layer stability,particle size composition,surface morphology,pore structure,and surface chemical property *** results showed that compared with WGF,pre-classification could reduce the collector dosage by 84.09%and the combination of pre-classification and ultrasonic pretreatment could increase the combustible recovery by 17.29%and up to 93.46%.The SC-FGUF process allows the ineffective adsorption of coarse residual carbon to collector during flotation stage to be reduced by pre-classification,and the tightly embedded state of fine CGFS particles is disrupted and surface oxidizing functional group occupancy was reduced by ultrasonic pretreatment,thus carbon and ash is easier to be separated in the flotation *** addition,some of the residual carbon particles were broken down to smaller sizes in the ultrasonic pretreatment,which led to an increase in the stability of flotation flow foam layer and a decrease in the probability of detachment of residual carbon particles from the ***,SCFGUF could increase the residual carbon recovery and reduce the flotation collector dosage,which is an innovative method for carbon-ash separation of CGFS with good application prospect.

关键词： Coal gasification fine slag Size classification Ultrasonic pretreatment Flotation Carbon recovery

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Mechanical properties and damage evolution characteristics of waste tire steel fiber-modified cemented paste backfill

引用

International Journal of Mining science and technology 2024年第7期34卷 909-924页

作者： Shenggen Cao Chiyuan Che Yun Zhang Changhao Shan Yang Liu Changzheng Zhao Shuyu Du State key laboratory for Fine exploration and Intelligent Development of Coal Resources School of MinesChina University of Mining and TechnologyXuzhou 221116China College of Energy Engineering Xi’an University of Science&TechnologyXi’an 710054China

During the process of constructional backfill mining,the cemented paste backfill(CPB)typically exhibits a high degree of brittleness and limited resistance to *** this study,the mechanical and damage evolution characteristics of waste tire steel fiber(WTSF)-modified CPB were studied through uniaxial compression tests,acoustic emission(AE)tests,and scanning electron microscopy(SEM).The results showed that the uniaxial compressive strength(UCS)decreased when the WTSF content was 0.5%,1%,and 1.5%.When the WTSF content reached 1%,the UCS of the modified CPB exhibited a minimal decrease(0.37 MPa)compared to that without *** the WTSF content was 0.5%,1%,and 1.5%,peak strain of the WTSF-modified CPB increased by 18%,31.33%,and 81.33%,while the elastic modulus decreased by 21.31%,26.21%,and 45.42%,*** addition of WTSF enhances the activity of AE events in the modified CPB,resulting in a slower progression of the entire failure *** the failure,the modified CPB retained a certain level of load-bearing ***,the failure of the CPB was dominated by tensile *** the addition of WTSF,a gradual increase in the proportion of tensile cracks was observed upon loading the modified CPB sample to the pore compaction *** three-dimensional localization of AE events showed that the WTSF-modified CPB underwent progressive damage during the loading,and the samples still showed good integrity after ***,the response relationship between energy evolution and damage development of WTSF-modified CPB during uniaxial compression was analyzed,and the damage constitutive model of CPB samples with different WTSF contents was *** study provides a theoretical basis for the enhancement of CPB modified by adding WTSF,serving as a valuable reference for the design of CPB constructional backfill.

关键词： Constructional backfill Cemented paste backfill Waste tire steel fiber Acoustic emission Damage characteristics

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Influence of pore structure heterogeneity on channeling channels during hot water flooding in heavy oil reservoir based on CT scanning

引用

Petroleum science 2024年第4期21卷 2407-2419页

作者： Qing-Jun Du Hao-Yu Zheng Jian Hou Yong-Ge Liu Jian-Fang Sun Dong Zhao State key laboratory of Deep Oil and Gas China University of Petroleum (East China) School of Petroleum Engineering China University of Petroleum (East China) laboratory for Marine Mineral Resources Qingdao National Laboratory for Marine Science and Technology Petroleum exploration and Production Research Institute

Hot water flooding is an effective way to develop heavy oil reservoirs. However, local channeling channels may form, possibly leading to a low thermal utilization efficiency and high water cut in the reservoir. The pore structure heterogeneity is an important factor in forming these channels. This study proposes a method that mixes quartz sand with different particle sizes to prepare weakly heterogeneous and strongly heterogeneous models through which hot water flooding experiments are *** the experiments, computer tomography(CT) scanning identifies the pore structure and micro remaining oil saturation distribution to analyze the influence of the pore structure heterogeneity on the channeling channels. The oil saturation reduction and average pore size are divided into three levels to quantitatively describe the relationship between the channeling channel distribution and pore structure heterogeneity. The zone where oil saturation reduction exceeds 20% is defined as a channeling *** scanning area is divided into 180 equally sized zones based on the CT scanning images, and threedimensional(3D) distributions of the channeling channels are developed. Four micro remaining oil distribution patterns are proposed, and the morphology characteristics of micro remaining oil inside and outside the channeling channels are analyzed. The results show that hot water flooding is more balanced in the weakly heterogeneous model, and the oil saturation decreases by more than 20% in most zones without narrow channeling channels forming. In the strongly heterogeneous model, hot water flooding is unbalanced, and three narrow channeling channels of different lengths form. In the weakly heterogeneous model, the oil saturation reduction is greater in zones with larger pores. The distribution range of the average pore size is larger in the strongly heterogeneous model. The network remaining oil inside the channeling channels is less than outside the channeling channels,

关键词： Heavy oil Hot water flooding Pore structure Channeling channels CT scanning

来源：

同方期刊数据库评论

在线全文

同方期刊数据库

学校读者我要写书评

暂无评论

A regression approach for seismic first-break picking

引用

Petroleum science 2024年第3期21卷 1584-1596页

作者： Huan Yuan San-Yi Yuan Jie Wu Wen-Jing Sang Yu-He Zhao CNPC key laboratory of Geophysical exploration China University of Petroleum(Beijing)Beijing 102249China Research Institute of Petroleum exploration&Development—Northwest(NWGI) Key Laboratory of reservoir characterization of CNPCPetroChinaLanzhou 730020GansuChina

The picking efficiency of seismic first breaks(FBs)has been greatly accelerated by deep learning(DL)***,the picking accuracy and efficiency of DL methods still face huge challenges in low signal-to-noise ratio(SNR)*** address this issue,we propose a regression approach to pick FBs based on bidirectional long short-term memory(Bi LSTM)neural network by learning the implicit Eikonal equation of 3D inhomogeneous media with rugged topography in the target *** employ a regressive model that represents the relationships among the elevation of shots,offset and the elevation of receivers with their seismic traveltime to predict the unknown FBs,from common-shot gathers with sparsely distributed *** from image segmentation methods which automatically extract image features and classify FBs from seismic data,the proposed method can learn the inner relationship between field geometry and *** addition,the predicted results by the regressive model are continuous values of FBs rather than the discrete ones of the binary *** picking results of synthetic data shows that the proposed method has low dependence on label data,and can obtain reliable and similar predicted results using two types of label data with large *** picking results of9380 shots for 3D seismic data generated by vibroseis indicate that the proposed method can still accurately predict FBs in low SNR *** subsequent stacked profiles further illustrate the reliability and effectiveness of the proposed *** results of model data and field seismic data demonstrate that the proposed regression method is a robust first-break picker with high potential for field application.

关键词： First-break picking Low signal-to-noiseratio Regression BiLSTM Traveltime Geometry Noisy seismic data

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

欢迎您,

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

请选择保存的检索档案：

请选择收藏分类：

通借通还

欢迎您,

建议与咨询 留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

请选择保存的检索档案： 新增检索档案 确定 取消

请选择收藏分类： 新增自定义分类 确定 取消

通借通还

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

请选择保存的检索档案：

请选择收藏分类：