检索结果-南通市图书馆

Hybrid electromechanical properties of hetero-doped and homogeneously bonded dual-mode pressure sensor for indoor body area network node

引用

Science China(Information Sciences) 2024年第1期67卷 240-253页

作者： Junbin YU Shuai XIAN Jinbiao MU Min WANG Yin WANG Xiaojuan HOU Le ZHANG Jian HE Jiliang MU Xiujian CHOU Science and Technology on Electronic Test and Measurement Laboratory North University of China Sichuan aerospace Fenghuo Servo Control Technology corporation

Pressure sensors are considerably important for continuous monitoring of human movement and the surrounding environment to construct a caregiving system for the elderly living alone.The challenge for pressure sensors that still remains is combining self-driven,comfort,and multifunctionalization.Herein,an all-in-one conformal pressure sensor(ACPS) based on a homogeneous integrated triboelectric-piezoelectric hybrid sensor is proposed.The ACPS has dual-mode sensing properties due to coupling triboelectrification and piezoelectric effect ensuring a stable response to various external stimulations.Silver-coated glass microspheres and polyacrylonitrile were uniformly filleted into the silicone rubber substrate using a hetero-doping method to create a stretchable electrode layer with flexible conformal characteristics and a piezoelectric layer with excellent piezoelectric properties,respectively.Meanwhile,the triboelectric layer was fabricated using the same silicone rubber,allowing ACPS to be homogeneously bonded into an all-in-one structure with reliable durability.This allowed various functional layers to have outstanding interface characteristics and thus improve the electrical transmission effect.The developed ACPS had outstanding sensitivity(1.04 V/104Pa),high linearity(about 0.984),a wide measurement range(10–700 k Pa),and can accurately and continuously distinguish multiple movements.Furthermore,using a homemade signal processing circuit,ACPSs can be deployed in the human body and the room as indoor body area network nodes.When successfully applied to the remote tracking of daily dynamic home life and the remote operation of small electrical equipment,these ACPSs can achieve real-time caregiving for the elderly living alone.As an application area desperately needed by society,this study envisions a caregiving system for the elderly living alone without violating personal privacy.

关键词： dual-mode pressure sensor homogeneous bonding all-in-onestructure indoor body area network node elderly caregiving microsystem

来源：

同方期刊数据库评论

在线全文

同方期刊数据库

学校读者我要写书评

暂无评论

A unified intelligent control strategy synthesizing multi-constrained guidance and avoidance penetration

引用

Science China(Information Sciences) 2024年第7期67卷 329-330页

作者： Sibo ZHAO Jianwen ZHU Weimin BAO Xiaoping LI School of aerospace Science and Technology Xidian University College of Missile Engineering Rocket Force University of Engineering China aerospace Science and Technology corporation

Satisfying various terminal constraints and achieving evasive flight in no-flying-zones (NFZs) are two important flight missions undertaken by high velocity vehicles. We studied an intelligent maneuvering guidance strategy using deep reinforcement learning (DRL) methods to achieve the coordination and unification of evasive flight and multi-constrained guidance with minimal energy loss.

关键词： Energy dissipation

来源：

同方期刊数据库评论

在线全文

同方期刊数据库

学校读者我要写书评

暂无评论

Effect of neutral polymeric bonding agent on tensile mechanical properties and damage evolution of NEPE propellant

引用

Defence Technology（防务技术） 2024年第2期32卷 357-367页

作者： M.Wubuliaisan Yanqing Wu Xiao Hou Kun Yang Hongzheng Duan Xinmei Yin State Key Laboratory of Explosion Science and Technology Beijing Institute of TechnologyBeijing100081PR China The Fourth Institute of China aerospace Science and Technology corporation Xi'an710025PR China School of aerospace Engineering Beijing Institute of TechnologyBeijing100081PR China Science and Technology on aerospace Chemical Power Laboratory Hubei Institute of Aerospace ChemotechnologyHubei441003PR China

Introducing Neutral Polymeric bonding agents(NPBA) into the Nitrate Ester Plasticized Polyether(NEPE)propellant could improve the adhesion between filler/matrix interface, thereby contributing to the development of new generations of the NEPE propellant with better mechanical properties. Therefore,understanding the effects of NPBA on the deformation and damage evolution of the NEPE propellant is fundamental to material design and applications. This paper studies the uniaxial tensile and stress relaxation responses of the NEPE propellant with different amounts of NPBA. The damage evolution in terms of interface debonding is further investigated using a cohesive-zone model(CZM). Experimental results show that the initial modulus and strength of the NEPE propellant increase with the increasing amount of NPBA while the elongation decreases. Meanwhile, the relaxation rate slows down and a higher long-term equilibrium modulus is reached. Experimental and numerical analyses indicate that interface debonding and crack propagation along filler-matrix interface are the dominant damage mechanism for the samples with a low amount of NPBA, while damage localization and crack advancement through the matrix are predominant for the ones with a high amount of NPBA. Finally, crosslinking density tests and simulation results also show that the effect of the bonding agent is interfacial rather than due to the overall crosslinking density change of the binder.

关键词： Solid propellant Bonding agent Mechanical properties Damage evolution Cohesive-zone model Interface debonding

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

辐照缺陷装饰位错是否会导致硬化?

引用

Acta Mechanica Sinica 2024年第2期40卷 259-267页

作者：崔嵬刘伟崔一南 Navigation and Control Technology Research Institute of China North Industries Group corporation Limited Beijing100089China School of Materials Science and Engineering Tsinghua UniversityBeijing100084China Applied Mechanics Lab. School of Aerospace EngineeringTsinghua UniversityBeijing100084China

纳米尺寸的辐照缺陷常常会在位错线附近聚集,形成装饰效应.研究者通常采用级联诱导源硬化模型描述装饰效应引起的辐照硬化.本研究工作发现不可动辐照缺陷装饰位错会导致辐照硬化,硬化程度与理论模型预测一致.然而,当装饰辐照缺陷可动时... 详细信息

纳米尺寸的辐照缺陷常常会在位错线附近聚集,形成装饰效应.研究者通常采用级联诱导源硬化模型描述装饰效应引起的辐照硬化.本研究工作发现不可动辐照缺陷装饰位错会导致辐照硬化,硬化程度与理论模型预测一致.然而,当装饰辐照缺陷可动时,则不发生辐照硬化,甚至发生软化,这种硬化消失是由于位错环始终处于与位错线相互作用力近似为零的区域,并与位错线发生关联运动.该工作带来了对辐照缺陷装饰效应和辐照硬化的新理解.

关键词：相互作用力辐照硬化辐照缺陷装饰效应硬化模型位错环纳米尺寸模型预测

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Scientific objectives and payload configuration of the Chang'E-7 mission

引用

National Science Review 2024年第2期11卷 285-300页

作者： Chi Wang Yingzhuo Jia Changbin Xue Yangting Lin Jianzhong Liu Xiaohui Fu Lin Xu Yun Huang Yufen Zhao Yigang Xu Rui Gao Yong Wei Yuhua Tang Dengyun Yu Yongliao Zou China aerospace Science and Technology corporation State Key Laboratory of Space Weather National Space Science Center Chinese Academy of Sciences National Space Science Center Chinese Academy of Sciences Institute of Geology and Geophysics Chinese Academy of Sciences Institute of Geochemistry Chinese Academy of Sciences Shandong Provincial Key Laboratory of Optical Astronomy and Solar-Terrestrial Environment School of Space Science and Physics Institute of Space SciencesShandong University Institute of Drug Discovery Technology Ningbo University State Key Laboratory of Isotope Geochemistry Guangzhou Institute of Geochemistry Chinese Academy of Sciences School of Earth Science and Engineering Sun Yat-sen University Lunar Exploration and Space Engineering Center

As the cornerstone mission of the fourth phase of the Chinese Lunar Exploration Program, Chang'E-7(CE-7) was officially approved, and implementation started in 2022, including a main probe and a communication relay satellite. The main probe, consisting of an orbiter, a lander, a rover and a mini-flying probe, is scheduled to be launched in 2026. The lander will land on Shackleton crater's illuminated rim near the lunar south pole, along with the rover and mini-flying probe. The relay satellite(named Queqiao-2) will be launched in February 2024 as an independent mission to support relay communication during scientific exploration undertaken by Chang'E-4, the upcoming Chang'E-6 in 2024 and subsequent lunar missions.The CE-7 mission is mainly aimed at scientific and resource exploration of the lunar south pole. We present CE-7's scientific objectives, the scientific payloads configuration and the main functions for each scientific payload with its key technical specifications.

关键词： Chang’ E-7 scientific objectives scientific payloads

来源：

同方期刊数据库评论

在线全文

同方期刊数据库

学校读者我要写书评

暂无评论

Hollow FeCoNiAl microspheres with stabilized magnetic properties for microwave absorption

引用

Nano Research 2024年第3期17卷 2079-2087页

作者： Linhe Yu Gangjie Lian Guozhen Zhu Sue Ren Yanfang Du Xuhui Xiong Rui Chen Jincang Zhang Wenbin You Renchao Che Institute of Advanced Materials College of Chemistry and Chemical EngineeringJiangxi Normal UniversityNanchang 330022China Laboratory of Advanced Materials Shanghai Key Lab of Molecular Catalysis and Innovative MaterialsAcademy for Engineering&TechnologyFudan UniversityShanghai 200438China Zhejiang Laboratory Hangzhou 311100China Capital aerospace Machinery corporation Limited Beijing 100000China AECC Beijing Institute of Aeronautical Materials Beijing 100095China International Center for Quantum and Molecular Structures Materials Genome InstitutePhysics DepartmentShanghai UniversityShanghai 200444China

Development of high-performance microwave absorption materials(MAM)with stabilized magnetic properties at high temperatures is specifically essential but remains challenging.Moreover,the Snoke's limitation restrains the microwave absorption(MA)property of magnetic materials.Modulating alloy components is considered an effective way to solve the aforementioned problems.Herein,a hollow medium-entropy FeCoNiAl alloy with a stable magnetic property is prepared via simple spray-drying and two-step annealing for efficient MA.FeCoNiAl exhibited an ultrabroad effective absorption band(EAB)of 5.84 GHz(12.16–18 GHz)at a thickness of just 1.6 mm,revealing an excellent absorption capability.Furthermore,the MA mechanism of FeCoNiAl is comprehensively investigated via off-axis holography.Finally,the electromagnetic properties,antioxidant properties,and residual magnetism at high temperatures of FeCoNiAl alloys are summarized in detail,providing new insights into the preparation of MAM operating at elevated temperatures.

关键词： microwave absorption hollow structure magnetic stability multiple microwave absorption mechanism

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Fabrication,Microstructure and Mechanical Properties of in situ GNPs Reinforced Magnesium Matrix Composites

引用

Acta Metallurgica Sinica(English Letters) 2024年第3期37卷 561-569页

作者： Peitang Zhao Xuejian Li Hailong Shi Xiaoshi Hu Chunlei Zhang Chao Xu Xiaojun Wang The 38th Research Institute of China Electronics Technology Group corporation Hefei 230088China National Key Laboratory of Precision Hot Processing of Metal Harbin Institute of TechnologyHarbin 150001China

Graphene reinforced magnesium matrix composites have wide applications in automotive,electronics,aerospace and military fields due to the fascinating mechanical properties.However,it is difficult to realize the high strength and ductility simultaneously.In this work,the in situ liquid-state method was utilized to prepare GNPs/Mg6Zn composites via CO_(2)/Mg chemical reaction.Tensile strength of the GNPs/Mg6Zn composites was improved with increasing content of the GNPs.Meantime,the composites also exhibit a notable plastic deformation stage,and especially the ductility of 0.12 GNPs/Mg6Zn composites reaches 27.6%.Therefore,this novel preparation method has great potential application for fabricating Mg matrix composites with high strength and high ductility.

关键词： Magnesium matrix composite In situ composite Microstructure Mechanical properties

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Bulging Distortion of Austenitic Stainless Steel Sheet on the Partially Penetrated Side of Non-Penetration Lap Laser Welding Joint

引用

Chinese Journal of Mechanical Engineering 2024年第1期37卷 286-295页

作者： Chengwu Yao Enze Liu Jiaming Ni Binying Nie Shanghai Key Laboratory of Materials Laser Processing and Modification School of Material Science and EngineeringShanghai Jiao Tong UniversityShanghai 200240China Shanghai aerospace Precision Machinery Institute Shanghai 201600China Chemical and Biological Engineering College Yichun UniversityYichun 336000China

Non-penetration laser welding of lap joints in austenitic stainless steel sheets is commonly preferred in fields where the surface quality is of utmost importance.However,the application of non-penetration welded austenitic stainless steel parts is limited owing to the micro bulging distortion that occurs on the back surface of the partial penetration side.In this paper,non-penetration lap laser welding experiments,were conducted on galvanized and SUS304 austenitic stainless steel plates using a fiber laser,to investigate the mechanism of bulging distortion.A comparative experiment of DC01 galvanized steel-Q235 carbon steel lap laser welding was carried out,and the deflection and distortion profile of partially penetrated side of the sheets were measured using a noncontact laser interferometer.In addition,the cold-rolled SUS304 was subjected to heat holding at different temperatures and water quenching after bending to characterize its microstructure under tensile and compressive stress.The results show that,during the heating stage of the thermal cycle of laser lap welding,the partial penetration side of the SUS304 steel sheet generates compressive stress,which extrudes the material in the heat-affected zone to the outside of the back of the SUS304 steel sheet,thereby forming a bulge.The findings of these experiments can be of great value for controlling the distortion of the partial penetrated side of austenitic stainless steel sheet during laser non-penetration lap welding.

关键词： Non-penetration lap laser welding Bulging distortion Austenitic stainless steel Compressive stress Tension stress

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Multi-constrained intelligent gliding guidance via optimal control and DQN

引用

Science China(Information Sciences) 2023年第3期66卷 214-229页

作者： Jianwen ZHU Hao ZHANG Sibo ZHAO Weimin BAO School of aerospace Science and Technology Xidian University China aerospace Science and Technology corporation

In order to improve the adaptability and robustness of gliding guidance under complex environments and multiple constraints, this study proposes an intelligent gliding guidance strategy based on the optimal guidance, predictor-corrector technique, and deep reinforcement learning(DRL). Longitudinal optimal guidance was introduced to satisfy the altitude and velocity inclination constraints, and lateral maneuvering was used to control the terminal velocity magnitude and position. The maneuvering amplitude was calculated by the analytical prediction of the terminal velocity, and the direction was learned and determined by the deep Q-learning network(DQN). In the direction decision model construction, the state and action spaces were designed based on the flight status and maneuvering direction, and a reward function was proposed using the terminal predicted state and terminal constraints. For DQN training, initial data samples were generated based on the heading-error corridor, and the experience replay pool was managed according to the terminal guidance error. The simulation results show that the intelligent gliding guidance strategy can satisfy various terminal constraints with high precision and ensure adaptability and robustness under large deviations.

关键词： gliding flight optimal guidance velocity control deep reinforcement learning intelligent decision

来源：

同方期刊数据库评论

在线全文

同方期刊数据库

学校读者我要写书评

暂无评论

Alloy design for laser powder bed fusion additive manufacturing:a critical review

引用

International Journal of Extreme Manufacturing 2024年第2期6卷 29-63页

作者： Zhuangzhuang Liu Qihang Zhou Xiaokang Liang Xiebin Wang Guichuan Li Kim Vanmeensel Jianxin Xie Key Laboratory for Advanced Materials Processing(MOE) Institute for Advanced Materials and TechnologyUniversity of Science and Technology BeijingBeijing 100083People’s Republic of China Beijing Advanced Innovation Center for Materials Genome Engineering University of Science and Technology BeijingBeijing 100083People’s Republic of China Beijing Laboratory of Metallic Materials and Processing for Modern Transportation Institute for Advanced Materials and TechnologyUniversity of Science and Technology BeijingBeijing 100083People’s Republic of China Capital aerospace Machinery corporation Limited Beijing 100076People’s Republic of China Key Laboratory for Liquid-Solid Structural Evolution and Processing of Materials(Ministry of Education) Shandong UniversityJingshi Road 17923Jinan 250061People’s Republic of China Department of Materials Engineering KU LeuvenLeuven 3001Belgium

Metal additive manufacturing(AM)has been extensively studied in recent decades.Despite the significant progress achieved in manufacturing complex shapes and structures,challenges such as severe cracking when using existing alloys for laser powder bed fusion(L-PBF)AM have persisted.These challenges arise because commercial alloys are primarily designed for conventional casting or forging processes,overlooking the fast cooling rates,steep temperature gradients and multiple thermal cycles of L-PBF.To address this,there is an urgent need to develop novel alloys specifically tailored for L-PBF technologies.This review provides a comprehensive summary of the strategies employed in alloy design for L-PBF.It aims to guide future research on designing novel alloys dedicated to L-PBF instead of adapting existing alloys.The review begins by discussing the features of the L-PBF processes,focusing on rapid solidification and intrinsic heat treatment.Next,the printability of the four main existing alloys(Fe-,Ni-,Al-and Ti-based alloys)is critically assessed,with a comparison of their conventional weldability.It was found that the weldability criteria are not always applicable in estimating printability.Furthermore,the review presents recent advances in alloy development and associated strategies,categorizing them into crack mitigation-oriented,microstructure manipulation-oriented and machine learning-assisted approaches.Lastly,an outlook and suggestions are given to highlight the issues that need to be addressed in future work.

关键词： laser powder bed fusion alloy design printability crack mitigation

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

欢迎您,

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

请选择保存的检索档案：

请选择收藏分类：

通借通还

欢迎您,

建议与咨询 留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

请选择保存的检索档案： 新增检索档案 确定 取消

请选择收藏分类： 新增自定义分类 确定 取消

通借通还

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

请选择保存的检索档案：

请选择收藏分类：