检索结果-南通市图书馆

Pressure-responsive pH-triggered layer-by-layer coating of paclitaxel-eluting balloon catheters for instant high-dose drug delivery for percutaneous coronary artery intervention

引用

Nano research 2024年第10期17卷 9141-9151页

作者： Jeong Yu Lee Shonit Nair Sharma Sung-Yu Hong Young-Guk Ko Yangsoo Jang Minjae Do Michael Christopher Stark Qiwen Peng Benjamin Allen Mossburg Bo Chan Seo Yuhan Lee Department of Materials Science and Engineering Korea Advanced Institute of Science and TechnologyDaejeon 305-701Republic of Korea Department of Anesthesiology Perioperativeand Pain MedicineCenter for Accelerated Medical Innovation&Center for NanomedicineBrigham and Women’s HospitalHarvard Medical SchoolBostonMA 02115USA Department of Biological Engineering Massachusetts Institute of TechnologyCambridgeMA 02139USA Cardiovascular Product Evaluation Center Yonsei University College of MedicineSeoul 120-752Republic of Korea Division of Cardiology Department of Internal MedicineSeverance Cardiovascular HospitalYonsei University College of MedicineSeoul 120-752Republic of Korea

Cardiovascular diseases remain the leading cause of mortality worldwide,with percutaneous coronary interventions(PCI)using drug-eluting stents(DES)as the standard treatment for coronary artery *** advancements in DES technology,challenges such as restenosis and stent thrombosis still necessitate further interventions and carry considerable risks,highlighting an urgent need for a novel therapeutic approach with lower restenosis rates and reduced reintervention *** balloons(DEBs)coated with anti-proliferative agents offer a novel method of local drug delivery for reducing restenosis by directly administering drugs to the lesion ***,efficient delivery of drugs within the brief procedural window while minimizing drug loss during maneuvering to the target site remains a ***,we developed a pressure-responsive and pH-triggered,paclitaxel(PTX)coated DEB catheter for rapid and high-dose delivery of paclitaxel to the lesion sites,overcoming the limitations of drug dispersion and inefficiencies associated with conventional *** the charge reversion of albumin around its isoelectric point,paclitaxel-loaded human serum albumin nanoparticles(PTX-HSA-NPs)and heparin were coated using a layer-by-layer deposition method at pH *** exposure to physiological pH(i.e.,7.4),the coating is rapidly released from the balloon *** with a protective shellac coating,the DEB achieved controlled release of high-dose paclitaxel to the arterial tissue in vivo(up to 400μg per gram tissue),exceeding current DEBs in the *** results suggest the pH-responsive,multi-layer coated DEB’s potential for superior procedural outcomes,addressing a critical unmet need in PCI.

关键词： drug-eluting balloon layer-by-layer coating coronary artery disease paclitaxel

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

一维/二维半导体器件肖特基势垒高度的调整方法

引用

Science Bulletin 2024年第9期69卷 1342-1352页

作者：孟建平李正国李舟 Beijing Institute of Nanoenergy and Nanosystems Chinese Academy of SciencesBeijing 101400China School of Nanoscience and Engineering University of Chinese Academy of SciencesBeijing 100049China Department of Electrical and Computer Engineering National University of SingaporeSingapore 117583Singapore Center for Intelligent sensors and MEMS National University of SingaporeSingapore 117608Singapore

The Schottky contact which is a crucial interface between semiconductors and metals is becoming increasingly significant in nano-semiconductor devices. A Schottky barrier, also known as the energy barrier, controls the depletion width and carrier transport across the metal–semiconductor *** or adjusting Schottky barrier height(SBH) has always been a vital issue in the successful operation of any semiconductor device. This review provides a comprehensive overview of the static and dynamic adjustment methods of SBH, with a particular focus on the recent advancements in nanosemiconductor devices. These methods encompass the work function of the metals, interface gap states,surface modification, image-lowering effect, external electric field, light illumination, and piezotronic effect. We also discuss strategies to overcome the Fermi-level pinning effect caused by interface gap states, including van der Waals contact and 1D edge metal contact. Finally, this review concludes with future perspectives in this field.

关键词： Schottky contact Schottky barrier height Adjustment methods One-and two-dimensional semiconductor

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Electric tuning of plasmonic resonances in ultrathin gold nanoribbon arrays

引用

Photonics research 2024年第08期12卷 1750-1759页

作者： ZHENXIN WANG ALEXEY V.KRASAVIN CHENXINYU PAN JUNSHENG ZHENG ZHIYONG LI XIN GUO ANATOLY V.ZAYATS LIMIN TONG PAN WANG State Key Laboratory of Extreme Photonics and Instrumentation College of Optical Science and Engineering Zhejiang University Department of Physics and London Centre for Nanotechnology King's College London Jiaxing Key Laboratory of Photonic Sensing & Intelligent Imaging Intelligent Optics & Photonics Research Center Jiaxing Research Institute Zhejiang University

Ultrathin plasmonic nanostructures offer an unparalleled opportunity for the study of light–matter interactions at the nanoscale and realization of compact nanophotonic devices. In this study, we introduce an ultrathin gold nanoribbon array and demonstrate an electric approach to actively tuning its plasmonic resonance, which leveraging the extreme light confinement capability in the ultrathin plasmonic nanostructure and a robust nanoscale electro-optical effect in indium tin oxide. Optimizing the design(to a total thickness as small as 12 nm for a 2-nmthick gold nanoribbon array), we numerically demonstrate a spectral shift in the plasmonic resonance up to 36 nm along with an approximately 16% change in the transmission at a gate voltage below 1.7 V at the wavelength of1.47 μm. This work presents progress towards electric tuning of plasmonic resonances in ultrathin metallic nanostructures for various applications including surface-enhanced spectroscopy, spontaneous emission enhancement,and optical modulation.

关键词： Chemical sensors Diffraction limit Electrooptical effects Indium tin oxide Light matter interactions Nanostructures

来源：

同方期刊数据库评论

在线全文

同方期刊数据库

学校读者我要写书评

暂无评论

3D bioprinting of in vitro porous hepatoma models:establishment,evaluation,and anticancer drug testing

引用

Bio-Design and Manufacturing 2024年第2期7卷 137-152页

作者： Xiaoyuan Wang Zixian Liu Qianqian Duan Boye Zhang Yanyan Cao Zhizhong Shen Meng Li Yanfeng Xi Jianming Wang Shengbo Sang Shanxi Key Laboratory of Micro Nano sensors and Artificial Intelligence Perception College of Electronic Information and Optical EngineeringTaiyuan University of TechnologyTaiyuan 030024China Key Lab of Advanced Transducers and Intelligent Control System of the Ministry of Education Taiyuan University of TechnologyTaiyuan 030024China Shanxi Institute of 6D Artificial Intelligence Biomedical Science Taiyuan 030031China Shanxi-Zheda Institute of Advanced Materials and Chemical Engineering Taiyuan 030024China Department of Pathology Shanxi Provincial Cancer HospitalTaiyuan 030024China General Hospital of Taiyuan Iron and Steel Company Taiyuan 030809China

Traditional tumor models do not tend to accurately simulate tumor growth in vitro or enable personalized treatment and are particularly unable to discover more beneficial targeted *** address this,this study describes the use of threedimensional(3D)bioprinting technology to construct a 3D model with human hepatocarcinoma SMMC-7721 cells(3DP-7721)by combining gelatin methacrylate(GelMA)and poly(ethylene oxide)(PEO)as two immiscible aqueous phases to form a bioink and innovatively applying fluorescent carbon quantum dots for long-term tracking of *** GelMA(10%,mass fraction)and PEO(1.6%,mass fraction)hydrogel with 3:1 volume ratio offered distinct pore-forming characteristics,satisfactorymechanical properties,and biocompatibility for the creation of the 3DP-7721 *** analysis and quantitative real-time fluorescence polymerase chain reaction(PCR)were used to evaluate the biological properties of the *** with the two-dimensional culture cell model(2D-7721)and the 3D mixed culture cell model(3DM-7721),3DP-7721 significantly improved the proliferation of cells and expression of tumor-related proteins and ***,we evaluated the differences between the three culture models and the effectiveness of antitumor drugs in the three models and discovered that the efficacy of antitumor drugs varied because of significant differences in resistance proteins and genes between the three *** addition,the comparison of tumor formation in the three models found that the cells cultured by the 3DP-7721 model had strong tumorigenicity in nude *** evaluation of the levels of biochemical indicators related to the formation of solid tumors showed that the 3DP-7721 model group exhibited pathological characteristics of malignant tumors,the generated solid tumors were similar to actual tumors,and the deterioration was *** research therefore acts as a foundation for the application of 3DP-7721 models in drug devel

关键词： 3D bioprinting Hepatoma tumor models Drug screening Antitumor drug development

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Analysis of the effect of the 2021 Semeru eruption on water vapor content and atmospheric particles using GNSS and remote sensing

引用

Geodesy and Geodynamics 2024年第1期15卷 33-41页

作者： Mokhamad Nur Cahyadi Arizal Bawasir Syachrul Arief Amien Widodo Meifal Rusli Deni Kusumawardani Yessi Rahmawati Ana Martina Putra Maulida Hilda Lestiana Department of Geomatics Engineering Institut Teknologi Sepuluh NopemberSurabaya 60111Indonesia research Center of Marine and Earth Science-Technology Directorate of Research and Community ServiceInstitut Teknologi Sepuluh NopemberSurabaya 60111Indonesia Geospatial Education and Training Division Geospatial Information Agency(BIG)Cibinong 16911Indonesia Department of Geophysics Engineering Institut Teknologi Sepuluh NopemberSurabaya 60111Indonesia Department of Mechanical Engineering Andalas UniversityPadang City 25175Indonesia Department of Economics Airlangga UniversitySurabaya 60286Indonesia research Center for Geological Resources National Research and Innovation AgencyJakarta 10340Indonesia

Mount Semeru,an active volcano in East Java,Indonesia,erupted on December 4,2021,following extreme rainfall that caused an avalanche of hot pyroclastic flows and *** tropospheric conditions and dominant particle components in the atmosphere can be monitored using Global Navigation Satellite System(GNSS)technology and remote sensing *** signal propagation delay in Precise Point Positioning(PPP)processing can be used to determine Zenith Tropospheric Delay(ZTD)and Precipitable Water Vapor(PWV)variables so that atmospheric conditions can be *** addition,by using remote sensing satellite data,it is possible to obtain rainfall data with high temporal resolution as well as the dominant particle and gas content values during *** the eruption period,the high value of PWV was dominated by the high intensity of precipitation during the rainy *** rainfall before the eruption caused activity inside the mountain to increase,which occurred in avalanche type *** from that,the atmosphere around Semeru was also dominated by SO_(2)content,which spreaded for tens of ***_(2)content began to be detected significantly by remote sensing sensors on December 7,*** this study,deformation and atmospheric monitoring were also carried out using low-cost GNSS at the Semeru Monitoring Station on September 9-15,*** results of the ZTD and ZWD values show the dominance of the wet component,which is directly proportional to rainfall activity in this period.

关键词： Semeru GNSS Water vapor Rainfall SO_(2)

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Challenges and Opportunities of Sub-6 GHz Integrated Sensing and Communications for 5G-Advanced and Beyond

引用

Chinese Journal of Electronics 2024年第2期33卷 323-325页

作者： Yuhong HUANG China Mobile research Institute China Mobile Communications Group Co. Ltd

The integrated sensing and communications(ISAC) technology has been perceived as a key feature of5G-Advanced and beyond mobile communication networks. Compared with sensing in millimeter-wave bands, sensing at sub-6 GHz band is an exceptional incentive to promote the industrialization process of ISAC due to its incomparable advantages in industrial development, especially for intelligent transportation and smart drone networks. This paper elaborates on the top challenges of sub-6 GHz ISAC technologies, as well as the potential solutions to improve the sensing capability.

关键词： Electric potential Millimeter wave technology Transportation Mobile communication sensors Millimeter wave communication Drones

来源：

同方期刊数据库评论

在线全文

同方期刊数据库

学校读者我要写书评

暂无评论

Recent advances and applications of single atom catalysts based electrochemical sensors

引用

Nano research 2024年第4期17卷 2994-3013页

作者： Mingyue Wang Mingfu Ye Jieyue Wang Yong Xu Zhendong Wang Xinyue Tong Xinya Han Kui Zhang Wenhai Wang Konglin Wu Xianwen Wei Institute of Clean Energy and Advanced Nanocatalysis(iClean) School of Chemistry and Chemical EngineeringAnhui University of TechnologyMaanshan 243002China School of Materials Science and Engineering Anhui University of TechnologyMaanshan 243002China Anhui International research Center of Energy materials green manufacturing and biotechnology School of Chemistry and Chemical EngineeringAnhui University of TechnologyMaanshan 243002China Carbon Cycle and Emission Control research Center Low-Carbon Research InstituteAnhui University of TechnologyMaanshan 243002China

Single atom catalysts(SACs)have attracted considerable attention due to their unique structures and excellent catalytic performance,especially in the area of catalysis science and energy conversion and *** recent years,SACs have emerged as a new type of sensing material for constructing electrochemical sensors(ECSs),presenting excellent sensitivity,selectivity,and ***,we review the recent advances of SACs in electrochemical sensing and discuss the status quo of current SAC-based ***,the fundamentals of SAC-based ECSs are outlined,including the involved central metal atoms and various supports of SACs in this field,the detection mechanisms,and improving strategies of SAC-based ***,the important applications of SAC-based ECSs are listed and classified,covering the detection of reactive oxygen and nitrogen species,environmental pollutants,disease biomarkers,and ***,based on abundant reported cases,the current conundrums of SAC-based ECSs are summarized,and the prediction of their future developing trends is also put forward.

关键词： single atom catalysts(SACs) electrochemical sensors(ECSs) reactive oxygen and nitrogen species environmental pollutants disease biomarkers pharmaceuticals

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

On-Chip Sub-Picometer Continuous Wavelength Fiber-Bragg-Grating Interrogator

引用

Photonic sensors 2024年第1期14卷 73-84页

作者： Yuan ZHUANG Jun ZOU Jiqiang ZHANG Lu ZHANG Jiahe ZHANG Leixin MENG Qing YANG research Center for Humanoid Sensing Zhejiang LabHangzhou 311121China ZJU-Hangzhou Global Scientific and Technological Innovation Center Hangzhou 310014China State Key Laboratory of Modern Optical Instrumentation College of Optical Science and EngineeringInternational Research Center for Advanced PhotonicsZhejiang UniversityHangzhou 310058China

Miniaturized fiber-Bragg-grating(FBG)interrogators are of interest for applications in the areas where weight and size controlling is important,e.g.,airplanes and aerospace or in-situ *** ultra-compact high-precision on-chip interrogator is proposed based on a tailored arrayed waveguide grating(AWG)on a silicon-on-insulator(SOI)*** on-chip interrogator enables continuous wavelength interrogation from 1544 nm to 1568 nm with the wavelength accuracy of less than 1 pm[the root-mean-square error(RMSE)is 0.73 pm]over the whole wavelength *** chip loss is less than 5 *** 1×16 AWG is optimized to achieve a large bandwidth and a low noise level at each channel,and the FBG reflection peaks can be detected by multiple output channels of the *** fabricated AWG is utilized to interrogate FBG sensors through the center of gravity(CoG)*** validation of an on-chip FBG interrogator that works with sub-picometer wavelength accuracy in a broad wavelength range shows large potential for applications in miniaturized fiber optic sensing systems.

关键词： Fiber optic sensing on-chip interrogator arrayed waveguide grating center of gravity

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Tunable characteristics of bending resonance frequency in magnetoelectric laminated composites

引用

Chinese Physics B 2013年第7期22卷 511-515页

作者：陈蕾李平文玉梅朱永 research Center of sensors and Instruments College of Optoelectronic Engineering Chongqing University Chongqing 400044 China

As the magnetoelectric （ME） effect in piezoelectric/magnetostrictive laminated composites is mediated by mechanical deformation, the ME effect is significantly enhanced in the vicinity of resonance frequency. The bending resonance frequency （fr） of bilayered Terfenol-D/PZT （MP） laminated composites is studied, and our analysis predicts that （i） the bending resonance frequency of an MP laminated composite can be tuned by an applied dc magnetic bias （Hdc） due to the E effect; （ii） the bending resonance frequency of the MP laminated composite can be controlled by incorporating FeCuNbSiB layers with different thicknesses. The experimental results show that with H dc increasing from 0 Oe （1 Oe=79.5775 A/m） to 700 Oe, the bending resonance frequency can be shifted in a range of 32.68 kHz≤fr≤33.96 kHz. In addition, with the thickness of the FeCuNbSiB layer increasing from 0 μm to 90 μm, the bending resonance frequency of the MP laminated composite gradually increases from 33.66 kHz to 39.18 kHz. This study offers a method of adjusting the strength of dc magnetic bias or the thicknesses of the FeCuNbSiB layer to tune the bending resonance frequency for ME composite, which plays a guiding role in the ME composite design for real applications.

关键词： magnetoelectric effect bending resonance frequency composite materials

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Highly Elastic,Bioresorbable Polymeric Materials for Stretchable,Transient Electronic Systems

引用

Nano-Micro Letters 2024年第6期16卷 1-13页

作者： Jeong‑Woong Shin Dong‑Je Kim Tae‑Min Jang Won Bae Han Joong Hoon Lee Gwan‑Jin Ko Seung Min Yang Kaveti Rajaram Sungkeun Han Heeseok Kang Jun Hyeon Lim Chan‑Hwi Eom Amay J.Bandodkar Hanul Min Suk‑Won Hwang KU‑KIST Graduate School of Converging Science and Technology Korea University145 Anam‑roSeongbuk‑guSeoul 02841Republic of Korea SK Hynix 2091Gyeongchung‑daeroBubal‑eupIcheon‑siGyeonggi‑do 17336Republic of Korea Hanwha Systems Co. Ltd.188Pangyoyeok‑roBundang‑guSeongnam‑siGyeonggi‑do 13524Republic of Korea Department of Electrical and Computer Engineering North Carolina State UniversityRaleighNC 27606USA Center for Advanced Self‑Powered Systems of Integrated sensors and Technologies(ASSIST) North Carolina State UniversityRaleighNC 27606USA Department of Integrative Energy Engineering Korea University145 Anam‑roSeongbuk‑guSeoul 02841Republic of Korea Biomaterials research Center Korea Institute of Science and Technology(KIST)5 Hwarang‑ro 14‑gilSeongbuk‑guSeoul 02792Republic of Korea Semiconductor R&D Center Samsung Electronics Co.Ltd.Hwaseong‑siGyeonggi‑do 18448Republic of Korea Center for Advanced Biomolecular Recognition Biomedical Research DivisionKorea Institute of Science and Technology(KIST)Seoul 02792Republic of Korea

Substrates or encapsulants in soft and stretchable formats are key components for transient,bioresorbable electronic systems;however,elastomeric polymers with desired mechanical and biochemical properties are very limited compared to nontransient ***,we introduce a bioresorbable elastomer,poly(glycolide-co-ε-caprolactone)(PGCL),that contains excellent material properties including high elongation-at-break(sensors,and actuators,which can reliably function under external *** of device components with wireless modules demonstrates elastic,transient electronic suture system with on-demand drug delivery for rapid recovery of postsurgical wounds in soft,time-dynamic tissues.

关键词： Biodegradable elastomer Conductive polymer composites Biomedical device Transient electronics

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

欢迎您,

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

请选择保存的检索档案：

请选择收藏分类：

通借通还

欢迎您,

建议与咨询 留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

请选择保存的检索档案： 新增检索档案 确定 取消

请选择收藏分类： 新增自定义分类 确定 取消

通借通还

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

请选择保存的检索档案：

请选择收藏分类：