检索结果-南通市图书馆

Numerical simulation of formaldehyde distribution characteristics in the high-speed train cabin

Building Simulation 2024年第2期17卷 285-300页

作者： Fan Wu Hang Dong Chao Yu Hengkui Li Qingmin Cui Renze Xu Key Laboratory of Traffic Safety on Track Ministry of EducationSchool of Traffic&Transportation EngineeringCentral South UniversityChangshaHunan410075China joint International research Laboratory of Key Technologies for Rail Traffic Safety ChangshaHunan410075China National&Local joint engineering research center of Safety Technology for Rail Vehicle ChangshaHunan410075China School of Software Henan University of EngineeringZhengzhouHenan451191China

The global concern over indoor air pollution in public vehicles has grown *** a focus on enhancing passengers’comfort and health,this study endeavors to investigate the distribution characteristics of formaldehyde within a high-speed train cabin by employing a computational fluid dynamics(CFD)model which is experimentally validated in a real cabin *** research focuses on analyzing the impact of air supply modes,temperature,relative humidity,and fresh air change rate on the distribution and concentration of *** results demonstrate that the difference in average formaldehyde concentration between the two air supply modes is below 1.3%,but the top air supply mode leads to a higher accumulation of formaldehyde near the sidewalls,while the bottom air supply mode promotes a more uniform distribution of ***,the temperature,relative humidity,and fresh air change rate are the primary factors affecting formaldehyde concentration levels,but they have modest effects on formaldehyde’s distribution pattern within the *** the temperature and relative humidity increase,the changes in formaldehyde concentrations in response to variations in these factors become more ***,the formaldehyde concentration may surpass the standard limit of 0.10 mg/m^(3)if the fresh air change rate falls below 212 m^(3)/*** research provides a systematic approach and referenceable results for exploring formaldehyde pollution in high-speed train cabins.

关键词： indoor air pollution formaldehyde CFD simulation high-speed train ventilation

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Photoelectrocatalytic hydrogen evolution and synchronous degradation of organic pollutants by pg-C_(3)N_(4)/β-FeOOH S-scheme heterojunction

引用

Science China(Technological Sciences) 2024年第4期67卷 1238-1252页

作者： LI XiBao HAN Tao ZHOU YingTang XIE Yu LUO YiDan HUANG JunTong CHEN Zhi DENG Fang School of Materials Science and engineering Nanchang Hangkong UniversityNanchang 330063China National-Local joint engineering research center of Heavy Metal Pollutants Control and Resource Utilization Nanchang Hangkong UniversityNanchang 330063China Zhejiang Key Laboratory of Petrochemical Environmental Pollution Control National Engineering Research Center for Marine AquacultureMarine Science and Technology CollegeZhejiang Ocean UniversityZhoushan 316022China

Crafting photoelectrocatalytic materials with robust oxidation-reduction properties for simultaneous hydrogen evolution and pollutant degradation poses a formidable *** this study,a pg-C_(3)N_(4)/β-FeOOH S-scheme heterostructure with a special energy band structure was developed by anchoring porous pg-C_(3)N_(4)on needle shapedβ-*** as a hole extraction layer,needle-leaf-likeβ-FeOOH can facilitate efficient hole migration and enhance charge ***,the optimized 0.2-pg-C_(3)N_(4)/β-FeOOH could degrade 78%of ofloxacin(OFLO)in 90 *** organic pollutants could absorb a large number of holes,which prompted a greater proportion of photogenerated electrons to actively participate in the hydrogen evolution reaction at the ***,the hydrogen production of 0.2-pg-C_(3)N_(4)/β-FeOOH reached 1452.88μmol cm^(-2)h^(-1),exhibiting a notable increase of 61.81-165.12μmol cm^(-2)h^(-1)compared with that in the absence of *** and theoretical calculation results underscore that this investigation is grounded in a distinctive electron and hole dual channel transfer *** findings offer novel insights for the future development of S-scheme heterojunction photoelectrocatalytic materials capable of concurrently degrading pollutants and promoting hydrogen evolution.

关键词： photoelectrocatalysis hydrogen evolution degradation synchronous S-scheme heterojunction

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

A novel method for vibration signal transmission and attenuation analysis in complex planetary gearboxes

引用

Science China(Technological Sciences) 2024年第9期67卷 2939-2953页

作者： WEI ChaoHu CAO HongRui SHI JiangHai YANG Yang DU MingGang National and Local joint engineering research center of Equipment Operation Safety and Intelligent Monitoring Xi’an Jiaotong UniversityXi’an 710049China School of Mechanical engineering Xi’an Jiaotong UniversityXi’an 710049China China North Vehicle research Institute Beijing 100072China

Planetary gearboxes play a crucial role in altering rotary speed and transmitting power in large machines like wind turbines and sophisticated vehicles. There are many nonlinear interfaces, such as splines, bearings, and gear pairs, in planetary gearboxes, and the resulting vibration signal transmission and attenuation mechanisms are still unknown. In this study, a novel method for quantitatively analyzing the transmission and attenuation of vibration signals is proposed. A multibody dynamic model of the planetary gearbox considering nonlinear gear meshing is presented and experimentally validated. To avoid the interference of foundation vibration on the transmission of the fault signal, the fault impact factor(FIF) is used to describe the intensity of the failure, which aligns well with the experimental signals. Based on the FIF, the vibration signal attenuation of nonlinear interfaces such as splines, bearings, and gear meshing interfaces is quantitatively evaluated. To clarify the transfer paths of fault vibration signals inside the gearbox, the transfer path area method(TPAM) based on FIF is proposed. According to the simulated results,the primary transfer paths of fault vibration signals within the gearbox have been identified, which is of great help in understanding the transmission and attenuation of vibration signals in planetary gearboxes.

关键词： planetary gearbox nonlinear interface fault mechanism vibration transmission vibration attenuation

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

High adsorption selectivity of activated carbon and carbon molecular sieve boosting CO_(2)/N_(2) and CH_(4)/N_(2) separation

引用

Chinese Journal of Chemical engineering 2024年第3期67卷 282-297页

作者： Siang Chen Wenling Wu Zhaoyang Niu Deqi Kong Wenbin Li Zhongli Tang Donghui Zhang The research center of Chemical engineering School of Chemical Engineering and TechnologyTianjin UniversityTianjin 300072China

Flue gas and coal bed methane are two important sources of greenhouse *** swing adsorption process has a wide range of application in the field of gas separation,and the selection of adsorbent is *** this regard,in order to assess the better adsorbent for separating CO_(2) from flue gas and CH_(4) from coal bed methane,adsorption isotherms of CO_(2),CH_(4) and N_(2) on activated carbon and carbon molecular sieve are measured at 303.15,318.15 and 333.15 K,and up to 250 *** experimental data fit better with Langmuir 2 compared to Langmuir 3 and Langmuir-Freundlich models,and Clausius-Clapeyron equation was used to calculate the isosteric *** the order of the adsorbed amount and the adsorption heat on the two adsorbents are CO_(2)>CH_(4)>N_(2).The adsorption kinetics are calculated by the pseudo-first kinetic model,and the order of adsorption rates on activated carbon is N_(2)-CH_(4)>CO_(2),while on carbon molecular sieve,it is CO_(2)-N_(2)>CH_(4).It is shown that relative molecular mass and adsorption heat are the primary effect on kinetics for activated carbon,while kinetic diameter is the main resistance factor for carbon molecular ***,the adsorption selectivity of CH_(4)/N_(2) and CO_(2)/N_(2) were estimated with the ideal adsorption solution theory,and carbon molecular sieve performed best at 318.15 K for both CO_(2) and CH_(4) *** study suggested that activated carbon is a better choice for separating flue gas and carbon molecular sieve can be a strong candidate for separating coal bed methane.

关键词： Activated carbon Carbon molecular sieve Adsorbent evaluation Adsorption equilibrium and kinetics Heat of adsorption Selectivity

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Synthesis of boron nitride nanorod and its performance as a metalfree catalyst for oxidative desulfurization of diesel fuel

引用

Chinese Journal of Chemical engineering 2024年第4期68卷 120-132页

作者： Tanaz Ghanadi Gholamreza Moradi Alimorad Rashidi Catalyst research center Faculty of Chemical and Petroleum EngineeringRazi UniversityKermanshahIran Nanotechnology research center Research Institute of Petroleum Industry(RIPI)TehranIran

In order to reduce the sulfur compounds in diesel fuel,boron nitride(BN)has been used as a novel metal-free catalyst in the present *** nanocatalyst was synthesized via template-free approach followed by heating treatment at 900℃ in nitrogen atmosphere that the characteristics of the sample were identified by the X-ray diffraction,Fourier-transform infrared spectroscopy,Raman spectroscopy,field emission scanning electron microscopy,transmission electron microscopy,atomic force microscopy,and N2 adsorption-desorption *** results of structural and morphological analysis represented that BN has been successfully *** efficacy of the main operating parameters on the process was studied by using response surface methodology based on the Box-Behnken design *** prepared catalyst showed high efficiency in oxidative desulfurization of diesel fuel with initial sulfur content of 8040 mg·kg^(-1)*** statistical analysis,a significant quadratic model was obtained to predict the sulfur removal as a function of efficient *** maximum efficiency of 72.4%was achieved under optimized conditions at oxidant/sulfur molar ratio of 10.2,temperature of 71℃,reaction time of 113 min,and catalyst dosage of 0.36 ***,the reusability of the BN was studied,and the result showed little reduction in activity of the catalyst after 10 times ***,a plausible mechanism was proposed for oxidation of sulfur compounds on the surface of the *** present study shows that BN materials can be selected as promising metal-free catalysts for desulfurization process.

关键词： Desulfurization Boron nitride(BN)nanostructure Experimental design BoxeBehnken

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Lifetime-tunable circularly polarized luminescent system based on triplet-to-singlet Förster resonance energy transfer

引用

Science China Chemistry 2024年第9期67卷 2918-2922页

作者： Zhenyi He Zizhao Huang Xiang Ma Key Laboratory for Advanced Materials and Feringa Nobel Prize Scientist joint research center Institute of Fine ChemicalsSchool of Chemistry and Molecular EngineeringEast China University of Science and TechnologyShanghai 200237China

Circularly polarized luminescence(CPL)materials have received widespread attention due to their remarkable performance and broad ***,current CPL material research primarily focuses on tunable color,intensity,and *** CPL with adjustable lifetime remains a significant ***,a series of CPL polymeric materials with tunable lifetime were obtained by employing phosphorescent terephthalic acid and chiral organic small molecule R/S-BNAF(a luminescent binaphthol derivative)to copolymerize with acrylamide in different *** was verified that this performance results from the different energy transfer efficiency between luminophores with varying ratios of the monomers for *** strategy to realize CPL with tunable lifetime by modulating the energy transfer efficiency will provide a new perspective to broaden the applications of CPL materials.

关键词： circularly polarized luminescence tunable lifetime Förster resonance energy transfer room temperature phosphorescence

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Controlling molecular assembly on time scale:Time-dependent multicolor fluorescence for information encryption

引用

Chinese Chemical Letters 2024年第7期35卷 336-340页

作者： Zixi Zou Jingyuan Wang Yian Sun Qian Wang Da-Hui Qu Key Laboratory for Advanced Materials and Feringa Nobel Prize Scientist joint research center School of Chemistry and Molecular EngineeringEast China University of Science and TechnologyShanghai 200237China

Dynamic assembly on time scale is common in biological systems but rare for artificial materials,especially for smart luminescent *** molecular assembly in a spatio-temporal manner and resulting in white-light-including multicolor fluorescence with time-dynamic features remains ***,controlling molecular assembly on time scale is achieved by integrating a pH-responsive motif to a transient alkaline solution which is fabricated by activators(NaOH)and deactivators(esters),leading to automatic assembly on time scale and time-dependent multicolor fluorescence changing from blue to white and *** kinetics of the assembly process is dependent on the ester hydrolysis process,which can be controlled by varying ester concentrations,temperature,initial pH,stirring rate and ester *** dynamic fluorescent system can be further developed for intelligent fluorescent materials such as fluorescent ink,three-dimension(3D)codes and even four-dimension(4D)codes,exhibiting a promising potential for information encryption.

关键词： Supramolecular chemistry Multicolor fluorescence White light emission Time-dependent fluorescence Information encryption

来源：

维普期刊数据库

同方期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Liquid metal biomaterials: translational medicines,challenges and perspectives

引用

National Science Review 2024年第2期11卷 264-284页

作者： Hanchi Xu Jincheng Lu Yikuang Xi Xuelin Wang Jing Liu Department of biomedical engineering School of Medicine Tsinghua University Beijing Tsinghua Changgung Hospital School of Clinical Medicine Tsinghua University Shanghai World Foreign Language Academy Beijing Advanced Innovation center for biomedical engineering School of Engineering MedicineBeihang University Beijing Key Lab of Cryo-biomedical engineering and Key Lab of Cryogenics Technical Institute of Physics and Chemistry Chinese Academy of Sciences

Until now, significant healthcare challenges and growing urgent clinical requirements remain incompletely addressed by presently available biomedical materials. This is due to their inadequate mechanical compatibility, suboptimal physical and chemical properties, susceptibility to immune rejection, and concerns about long-term biological safety. As an alternative, liquid metal(LM) opens up a promising class of biomaterials with unique advantages like biocompatibility, flexibility, excellent electrical conductivity,and ease of functionalization. However, despite the unique advantages and successful explorations of LM in biomedical fields, widespread clinical translations and applications of LM-based medical products remain limited. This article summarizes the current status and future prospects of LM biomaterials, interprets their applications in healthcare, medical imaging, bone repair, nerve interface, and tumor therapy, *** to translate LM materials into medicine and obstacles encountered in practices are *** that, we outline a blueprint for LM clinics, emphasizing their potential in making new-generation artificial organs. Last, the core challenges of LM biomaterials in clinical translation, including bio-safety,material stability, and ethical concerns are also discussed. Overall, the current progress, translational medicine bottlenecks, and perspectives of LM biomaterials signify their immense potential to drive future medical breakthroughs and thus open up novel avenues for upcoming clinical practices.

关键词： liquid metal biomaterials translational medicine clinical device healthcare therapeutics

来源：

同方期刊数据库评论

在线全文

同方期刊数据库

学校读者我要写书评

暂无评论

Recent progress in functional modification and crosslinking of bioprosthetic heart valves

引用

Regenerative Biomaterials 2024年第1期3卷 1-16页

作者： Cheng Zheng Li Yang Yunbing Wang National engineering research center for Biomaterials Sichuan UniversityChengdu 610064China

Valvular heart disease(VHD),clinically manifested as stenosis and regurgitation of native heart valve,is one of the most prevalent cardiovascular diseases with high *** valve replacement surgery has been recognized as golden standard for the treatment of *** to the clinical application of transcatheter heart valve replacement technic and the excellent hemodynamic performance of bioprosthetic heart valves(BHVs),implantation of BHVs has been increasing over recent years and gradually became the preferred choice for the treatment of ***,BHVs might fail within 10-15 years due to structural valvular degeneration(SVD),which was greatly associated with drawbacks of glutaraldehyde crosslinked BHVs,including cytotoxicity,calcification,component degradation,mechanical failure,thrombosis and immune *** prolong the service life of BHVs,much effort has been devoted to overcoming the drawbacks of BHVs and reducing the risk of *** this review,we summarized and analyzed the research and progress on:(i)modification strategies based on glutaraldehyde crosslinked BHVs and(ii)nonglutaraldehyde crosslinking strategies for BHVs.

关键词： bioprosthetic heart valves modification crosslinking anticalcification antithrombosis

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

On-surface synthesis and characterization of polyynic carbon chains

引用

National Science Review 2024年第3期11卷 192-199页

作者： Wenze Gao Wei Zheng Luye Sun Faming Kang Zheng Zhou Wei Xu Interdisciplinary Materials research center School of Materials Science and Engineering Tongji University

Carbyne, an elusive sp-hybridized linear carbon allotrope, has fascinated chemists and physicists for decades. Due to its high chemical reactivity and extreme instability, carbyne was much less explored in contrast to the sp2-hybridized carbon allotropes such as graphene. Herein, we report the on-surface synthesis of polyynic carbon chains by demetallization of organometallic polyynes on the Au（111） surface;the longest one observed consists of ～60 alkyne units（120 carbon atoms）. The polyynic structure of carbon chains with alternating triple and single bonds was unambiguously revealed by bond-resolved atomic force microscopy. Moreover, an atomically precise polyyne, C14, was successfully produced via tip-induced dehalogenation and ring-opening of the decachloroanthracene molecule(C14Cl10) on a bilayer NaCl/Au（111） surface at 4.7 K, and a band gap of 5.8 eV was measured by scanning tunnelling spectroscopy,in a good agreement with the theoretical HOMO–LUMO gap（5.48 eV）.

关键词： polyyne scanning probe microscopy carbon allotrope on-surface synthesis organometallic polyyne

来源：

同方期刊数据库评论

在线全文

同方期刊数据库

学校读者我要写书评

暂无评论

欢迎您,

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

请选择保存的检索档案：

请选择收藏分类：

通借通还

欢迎您,

建议与咨询 留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

请选择保存的检索档案： 新增检索档案 确定 取消

请选择收藏分类： 新增自定义分类 确定 取消

通借通还

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

请选择保存的检索档案：

请选择收藏分类：