检索结果-南通市图书馆

Cerium dioxide as a new reactive sorbent for fast degradation of parathion methyl and some other organophosphates

在线全文

学校读者我要写书评

暂无评论

Journal of Rare Earths 2014年第4期32卷 360-370页

作者： Pavel Janos Pavel Kuran Martin Kormunda vaclav Stengl Tomas Matys Grygar Marek Dosek Martin Stastny Jakub Ederer vera Pilarova Lubos vrtoch Faculty of the Environment University of Jan Evangelista Purkyne Faculty of Science University of Jan Evangelista Purkyne institute of inorganic Chemistry AS CR v.v.i.

Cerium dioxide was used for the first time as reactive sorbent for the degradation of the organophosphate pesticides para-thion methyl, chlorpyrifos, dichlofenthion, fenchlorphos, and prothiofos, as well as of some chemical warfare agents-nerve gases soman and O-ethyl S-[2-（diisopropylamino） ethyl] methylphosphonothioate （vX）. CeO2 specimens were prepared by calcination of basic cerous carbonate obtained by precipitation from an aqueous solution. The CeO2 samples containing certain amounts （1 wt.%-5 wt.%） of the neighboring lanthanides （La, Pr, Nd） were prepared in a similar way from pure lanthanide salts. it was shown that ceria accelerated markedly the decomposition of parathion methyl causing the cleavage of the P-O-aryl bond in the pesticide molecule. A similar reaction mechanism was proposed for the degradation of other organophosphate pesticides and nerve agents. The degradation times （reaction half-times） were in an order of minutes in the presence of CeO2, compared to hours or days under common environ-mental conditions. The reaction in suitable organic solvents allowed conversions of about 90%for parathion methyl loading of 20 mg pesticide/g CeO2 within 2 h with a reactant half-life in the order of 0.1 min. The key parameter governing the degradation efficiency of CeO2 was the temperature during calcination. At optimum calcination temperature （about 773.15 K）, the produced ceria retained a sufficiently high surface area, and attained an optimum degree of crystallinity （related to a number of crystal defects, and thus poten-tial reactive sites）. The presence of other lanthanides somewhat decreased the reaction rate, but this effect was not detrimental and permitted the possible use of chemically impure ceria as a reactive sorbent. A fast organophosphate degradation was demonstrated not only in non-polar solvents （such as heptane）, but also in polar aprotic solvents （acetonitrile, acetone） that are miscible with water. This opens new possibilities for designi

关键词： cerium dioxide carbonate precursor lanthanides organophosphate pesticide parathion methyl chemical warfare agents hydrolysis non-aqueous solvents rare earths

impact of Natural Oil-Based Recycled Polyols on Properties of Cast Polyurethanes

在线全文

学校读者我要写书评

暂无评论

Journal of Renewable Materials 2018年第7期6卷 697-706页

作者： Hynek Beneš Aleksandra Paruzel JiříHodan Olga Trhlíková institute of Macromolecular Chemistry AS cr v.v.i.Heyrovsky Sq.216206 Prague 6Czech Republic

in this study, castor oil, rapeseed oil and medium chain triglycerides of coconut oil, were transesterified bymeans of 2-ethyl-2-hydroxymethyl-1,3-propanediol (trimethylolpropane) and consequently used to convertpolycarbonate waste from end-of-life vehicles into liquid polyols. The prepared recycled polyols, composeduniquely of renewable and recycled components, had a hydroxyl number of ca. 250 mg KOH·g−1. They weresuccessfully applied as 100% replacement of a virgin polyol for preparation of solid crosslinked polyurethanes(PU) by solvent-free casting. The produced rigid cast PU exhibited the main transition temperature rangingfrom 44°C to 53°C, the hardness value from 46 to 61 Shore D and the beneficial low water absorption (0.4-0.5wt.%). The PU network structure was highly influenced by the presence of aromatic structures ofpolycarbonate-units and fatty acid compositions. A suitable selection of natural oil thus enabled to adjustthermo-mechanical properties and promote excellent optical transparency of the produced PU.

关键词： Natural oil cast polyurethane bio-based polycarbonate waste recycling

Numerical Simulation of Separated Flows in Channels

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Journal of Thermal Science 2012年第2期21卷 145-153页

作者： Petr Louda Jaromír Príhoda Petr Sváek Karel Kozel Czech Technical University in Prague Fac. of Mechanical Engineering Karlovo nám. 13 CZ-121 35 Praha 2 institute of thermomechanics as cr v.v.i. Dolejkova 5 CZ-182 00 Praha 8

The work deals with numerical modelling of turbulent flows in channels with an expansion of the cross-section where flow separation and reattachment occur. The performance of several eddy viscosity models and an explicit algebraic Reynolds stress model (EARSM) is studied. The used test cases are flows in channels with various backward facing steps where the step is perpendicular or inclined and the top wall is parallel or deflected. Furthermore, a channel with the circular ramp is considered. The numerical solution is achieved by the finite volume method or by the finite element method. The results of both numerical approaches are compared.

关键词： backward facing step flow EARSM model SST model

Achieving superior performance in powder-metallurgy near-βtitanium alloy by combining hot rolling and rapid heat treatment followed by aging

在线全文

学校读者我要写书评

暂无评论

Journal of Materials Science & Technology 2024年第4期171卷 24-36页

作者： Fucheng Qiu Tuo Cheng Yuchao Song Orest M.ivasishin Dmytro G.Savvakin Guangyu Ma Huiyan Xu College of Materials Science and Engineering Jilin UniversityChangchun 130025China international Center of Future Science Jilin UniversityChangchun 130025China G.v.Kurdyumov institute for Metal Physics KyivUkraine College of Biological and Agricultural Jilin UniversityChangchun 130025China

Heat treatment plays an important role in tailoring the mechanical properties of powder-metallurgy(PM)titanium ***,only limited work about the rapid heat treatment(RHT)of PM titanium alloys has been *** this work,RHT was applied to PM Ti-5Al-5Mo-5v-1cr-1Fe alloy after hot rolling to study the evolution of its mechanical properties and the influence of residual pores on its *** hot rolling and annealing,a fine and uniformα+βstructure with few residual pores is *** RHT,the primaryαdissolves gradually and completes in theβregion,and theβgrains then grow,resulting in the continuous decrease in elongation after ***,the tensile strength first increases and then decreases with increasing RHT temperature,owing to the increase in volume fraction of secondaryαinα+βregion and theβgrain growth inβ*** contrast to the RHT of cast-and-wrought titanium,the negative influence of residual pores lowers the RHT temperature for obtaining the highest tensile strength to a temperature below theβ-transus *** the negative influence of the residual pores,retained primaryαand fineβgrains with fine secondaryαinside contribute to achieving a good strength/ductility balance(1570 MPa and 6.1%,respectively).Addi-tionally,although at higher cycles to failure,the negative influence of residual pores increases as it affects the crack initiation zone at the subsurface,the good resistance of secondaryαto fatigue crack propaga-tion still enhances the fatigue strength considerably(about 300 MPa).This work suggests a cost-effective strategy to produce titanium alloys with high performance.

关键词： Rapid heat treatment Powder metallurgy Mechanical properties Near-βtitanium Residual pores

Pneumatic Measurements Downstream of a Radial Turbine Nozzle Cascade

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Journal of Thermal Science 2010年第1期19卷 42-46页

作者： Martin LUXA Rudolf DvORAK David SiMURDA Jan viMMR Department of Fluid Dynamics Institute of Thermomechanicsv.v.i.Academy of Science of the Czech RepublicPragueCzech Republic Department of Mechanics University of West Bohemia in PilsenPlzeňCzech Republic

This paper deals mainly with pneumatic measurements on a radial turbine nozzle cascade. The fill radial cascade guarantees the exit flow field periodicity downstream of it. A special traversing mechanism with a five - hole conical probe moving along a circular path behind the cascade was used for flow field investigation in this type of cascade with very low aspect ratio. The analyses of results of 2D and 3D pneumatic measurements including loss coefficient values are presented.

关键词： radial turbine cascade aspect ratio pneumatic measurement loss coefficient

investigation of the Compressible Flow through the Tip-Section Turbine Blade Cascade with Supersonic inlet

在线全文

学校读者我要写书评

暂无评论

Journal of Thermal Science 2016年第2期25卷 138-144页

作者： Martin Luxa Jaromír Príhoda David Simurda Petr Straka Jaroslav Synác institute of thermomechanics AS cr v.v.i. Dolejskova 1402/5 18200 Prague Czech Republic Aerospace Research and Test Establishment Plc Beranovych 130 19905 Prague Czech Republic Doosan Skoda Power Co. Ltd. Tylova 1/57 30128 Pilsen Czech Republic

The contribution deals with the experimental and numerical investigation of compressible flow through the tip-section turbine blade cascade with the blade 54″ long. Experimental investigations by means of optical(interferometry and schlieren method) and pneumatic measurements provide more information about the behaviour and nature of basic phenomena occurring in the profile cascade flow field. The numerical simulation was carried out by means of the EARSM turbulence model according to Hellsten [5] completed by the bypass transition model with the algebraic equation for the intermittency coefficient proposed by Straka and P?íhoda [6] and implemented into the in-house numerical code. The investigation was focused particularly on the effect of shock waves on the shear layer development including the laminar/turbulent transition. interactions of shock waves with shear layers on both sides of the blade result usually in the transition in attached and/ or separated flow and so to the considerable impact to the flow structure and energy losses in the blade cascade.

关键词： long turbine rotor blade supersonic tip section optical methods transition modelling CFD

Tectonic Phase Separation Applied to the Sudetic Marginal Fault Zone(NE part of the Czech Republic)

在线全文

学校读者我要写书评

暂无评论

Journal of Mountain Science 2015年第2期12卷 251-267页

作者： NOvAKOvA Lucie Department of Seismotectonics Institute of Rock Structure and Mechanics Academy of Sciencesv.v.i.V Holesovickach 41Prague 8Czech Republic

This study emphasizes the advantage of tectonic phase separation in determination of a tectonic evolution of complicated fault zones. The research focused on the Sudetic Marginal Fault Zone(SMFZ) –a 250 km long active fault zone with documented intraplate seismicity situated on the NE margin of the Bohemian Massif(the Czech Republic). The tectonic history of the SMFZ as well as its kinematic development has been rather complicated and not quite understood. A field structural investigation was carried out in extensive surroundings of the fault zone. The fault-slip data were collected in a number of natural outcrops and quarries with the aim at establishing a robust and field-constrained model for local brittle structural evolution of the studied area. A paleostress analysis was calculated using the collected fault-slip data inversion. The T-Tecto software was utilized for semiautomatic separation of the paleostress phases. Simultaneously three methods of data separation were employed:(1) the Gauss inverse method,(2) the visualization of Gauss object Function, and(3) the frequency analysis. Within the fault zone multiphase movements were observed on various types of faults as well as wide range of the kinematic indicators orientations. The frequency analysis confirmed the multiphase history of the SMFZ. The calculated tectonic phases were divided according to their relative age as constrained by cross cutting relationships and, where observed, multiple striations on a single fault plane and classified from the oldest to the younger. Data separation and inversion usingT-Tecto software with the Gauss inverse method revealed four different stress phases which are 3 strike-slip stress regimes and one compressional regime. The strike-slip regimes are characterized by σ1 trending NW-SE(43), NNE-SSW(18), ENE-WSW(76) and the compressional one by σ1 trending W-E(26). First, compression occurred parallel to the SMFZ supposedly during the variscan period. Second, compression at

关键词： Sudetic Marginal Fault Zone Paleostress reconstruction Active tectonics Frequency analysis

Spectral properties and identification of aerostatic bearings

在线全文

学校读者我要写书评

暂无评论

Acta Mechanica Sinica 2011年第1期27卷 63-67页

作者： Jan Kozánek Ladislav Pust institute of thermomechanics AS cr

Modified rotor kit Bently Nevada was used for dynamic characteristics measurements of new developed aerostatic *** model of these bearings is considered as *** was identified with the help of harmonic force excitation independently from the speed of journal *** stiffness and damping matrices were identified for different air inlet *** calculated spectral properties allow to determine the stability boundary for suitable variation of model parameters.

关键词： Aerostatic bearing · identification · Stiffness · Damping coefficients

Overview of the HiLASE project: high average power pulsed DPSSL systems for research and industry

在线全文

学校读者我要写书评

暂无评论

High Power Laser Science and Engineering 2014年第2期2卷 1-10页

作者： M.Divoky M.Smrz M.Chyla P.Sikocinski P.Severova O.Novak J.Huynh S.S.Nagisetty T.Miura J.Pila O.Slezak M.Sawicka v.Jambunathan J.vanda A.Endo A.Lucianetti D.Rostohar P.D.Mason P.J.Phillips K.Ertel S.Banerjee C.Hernandez-Gomez J.L.Collier T.Mocek HiLASE Institute of Physics AS CR v.v.i. Na Slovance 2 182 21 Prague Czech Republic STFC Rutherford Appleton Laboratory Didcot OX11 0QX United Kingdom

An overview of the Czech national R&D project HiLASE(High average power pulsed laser) is presented. The project focuses on the development of advanced high repetition rate, diode pumped solid state laser(DPSSL) systems with energies in the range from mJ to 100 J and repetition rates in the range from 10 Hz to 100 kHz. Some applications of these lasers in research and hi-tech industry are also presented.

关键词： DPSSL Yb3+:YAG thin-disk multi-slab pulsed high average power laser