检索结果-南通市图书馆

Progress in Natural science:Materials International 2024年第2期34卷 376-388页

作者： Ling Zhang Yinglong Li School of Materials science and engineering Northeastern University School of Mechanical and engineering Ningxia Institute of Science and Technology

Equal channel angle pressing is recognized for its ability to refine alloy grains and alter grain orientation, thereby achieve better mechanical performance of the magnesium alloy. This study investigates the microstructures,dynamic recrystallization mechanism, texture development, and mechanical performance of GW94K(Mg–8.7Gd–4.18Y–0.42Zr wt. %) Mg alloy following ECAP-4 passes at 400°C and 3 mm/min. Results show that when high-temperature deformation is undertaken, twin formation is suppressed while dislocation slip is facilitated, increasing dislocation density during deformation. Following ECAP deformation, the sample displayed higher fracture elongation, TYS, and UTS than the as-solutioned GW94K alloy. In particular, the GW94K alloy performed well mechanically after ECAP-4 passes, with an ultimate TYS of 231 MPa, an UTS of 290 MPa, and an elongation of 14.8 %. DDRX and shear bands induce CDRX, both of which are important in plastic deformation. as well as in modifying microstructure and grain orientation during ECAP deformation.

关键词： Dynamic recrystallization mechanism Equal channel angular pressing Magnesium alloy Mechanical performance Mg-Gd-Y-Zr alloy Texture development

Rational design and energy catalytic application of high-loading single-atom catalysts

在线全文

同方期刊数据库

学校读者我要写书评

暂无评论

Rare Metals 2024年第10期43卷 4844-4866页

作者： Zi-Wei Deng Yue Liu Jie Lin Wen-Xing Chen Energy and Catalysis Center School of Materials Science and EngineeringBeijing Institute of Technology Ningbo institute of Materials Technology and engineering Chinese Academy of Science

It is well known that single-atom catalysts(SACs)have become a hot topic in the field of catalysis due to their advantages such as 100% metal atom utilization efficiency,high catalytic activity and selectivity compared with conventional catalysts and nanocatalysts. However, the isolated metal atoms on SACs have thermodynamic instability and tend to agglomerate, which limit their catalytic ***, it is of great significance to synthesize stable and high-loading single-atom catalysts(HLSACs). In this paper,we review the research progress of HLSACs from two aspects:design and application. Firstly, we comprehensively introduce the synthesis strategies of HLSACs, namely, top-down and bottom-up methods. Secondly, we overview the application status of HLSACs in three fields: electrocatalysis, thermal catalysis and photocatalysis. Finally, we summarize the development prospects and challenges of HLSACs.

关键词： Design Electrocatalysis High-loading single-atom catalysts Photocatalysis Thermal catalysis

Growth,optical dispersion and magnetic behavior of Dy^(3+) doped yttrium iron garnet crystals

在线全文

同方期刊数据库

学校读者我要写书评

暂无评论

Journal of Rare Earths 2024年第6期42卷 1110-1117,I0004页

作者： Yating Fang Hui Shen Yudie Ma Shijie Liao Shuang Xia Tian Tian Ding Zhou Yunfeng Ma Jiayue Xu institute of Crystal Growth School of Materials Science and EngineeringShanghai Institute of Technology National engineering Center of Electromagnetic Radiation Control Materials School of Electronic Science and EngineeringUniversity of Electronic Science and Technology of China

Y_(3)Fe_(5)O_(12)(YIG)crystals are highly desirable for the fabrication of mid-infrared isolators with the rapid growth of optical communications,although it is rather challenging to grow large size and high-quality single ***^(3+)doping is expected to improve the optical and magneto-optical prope ***,high quality Dy:YIG crystals and the adjustment of Dy^(3+)on the structure and optical behavior of YIG crystal remain unclear,impeding its practical ***,a series of Y_(3-x)Dy_(x)Fe_(5)O_(12)(x=0,0.5,1.0,1.5,3)solid solution crystals was grown by the flux-Bridgman method and single crystals up to 25 mm were *** the introduction of Dy^(3+),lattice parameters are gradually enlarged from 1.2379 nm(YIG)to 1.2420 nm(DyIG).Typical Dy^(3+)absorption peaks are observed around 1070,1265 and 1670 *** refractive index decreases from 2.37(500 nm)to 2.10(2500 nm)for YIG crystal,and it reduces from 2.47(500 nm)to 2.16(2500 nm)for DyIG *** optical bandgaps remain almost unchanged for Dy:YIG *** optical dispersion of the refractive indices was finely fitted by the Wemple and DiDomenico(WDD)and the Sellmeier models,*** the increase of Dy^(3+)content,the saturation magnetization(Ms)decreases significantly from 23.62 emu/g(YIG)to 5.33 emu/g(DyIG).Small coercive field is persisted for this system,endowing small external magnetic *** results provide valuable references for the manipulation of rare earths on the properties of magnetooptical crystals,which is beneficial to the design of high-performance garnet crystals for the application of optical switching and non-reciprocal related devices.

关键词： Magneto-optical crystal Yttrium iron garnet Dy^(3+)doping Crystal growth Optical dispersion Rare earths

维普期刊数据库

Comprehensive tensile properties improved by deep cryogenic treatment prior to aging in friction-stir-welded 2198 Al–Li alloy

在线全文

学校读者我要写书评

暂无评论

Rare Metals 2024年第10期43卷 5403-5409页

作者： Jian-Qiu Sun Yue Ma Chong Gao Hong-Yun Luo School of Materials science and engineering Beihang University Chinalco Research institute of science and Technology

In order to improve the comprehensive mechanical properties,deep cryogenic treatment （DCT）prior to aging was carried out on friction-stir-welded（FSW） 2198 Al-Li alloy;afterward,the microstructure and tensile properties were characterized by means of optical microscopy （OM）,transmission electron microscopy（TEM） and tensile *** results show that FSW 2198 alloy through DCT prior to aging （DAT） possesses superior tensile properties than conventional aging treatment （AT）The microstructural analysis reveals that DAT alloy exhibits a finer grain structure,since DCT might effectively alleviate the residual stress in FSW 2198 alloy and thus decrease the driving force for grain coarsening in subsequent aging ***,DCT generates dislocation multiplication,which provides more preferential nucleation sites for T1 （Al2CuLi） phase during subsequent aging treatment,resulting in high-density fine T1 phases and thin precipitate-free zone within DAT *** reasonable microstructure leads to DAT alloy possessing better strength-ductility combination compared to AT alloy.

关键词： Al–Li alloy Deep cryogenic treatment Friction stir welding Tensile properties

Fe-Induced Electronic Transfer and Structural Evolution of Lotus Pod-Like CoNiFePx@P,N-C Heterostructure for Sustainable Oxygen Evolution

在线全文

同方期刊数据库

学校读者我要写书评

暂无评论

Energy & Environmental Materials 2024年第3期7卷 186-193页

作者： Xiaojun Zeng Qingqing Zhang Chulong Jin Hui Huang Yanfeng Gao Advanced Ceramic Materials Research institute School of Materials Science and EngineeringJingdezhen Ceramic University Singapore institute of Technology School of Materials science and engineering Shanghai University

Transition metal phosphides with metallic properties are a promising candidate for electrocatalytic water oxidation,and developing highly active and stable metal phosphide-based oxygen evolution reaction catalysts is still ***,we present a facile ion exchange and phosphating processes to transform intestine-like CoNiPx@P,N-C into lotus pod-like CoNiFePx@P,N-C heterostructure in which numerous P,N-codoped carboncoated CoNiFePxnanoparticles tightly anchors on the 2D carbon ***,the as-prepared CoNiFePx@P,N-C enables a core-shell structure,high specific surface area,and hierarchical pore structure,which present abundant heterointerfaces and fully exposed active ***,the incorporation of Fe can also induce electron transfer in CoNiPx@P,IM-C,thereby promoting the oxygen evolution ***,CoNiFePx@P,IM-C delivers a low overpotential of 278 mV （vs RHE） at a current density of10 mA cm-1and inherits excellent long-term stability with no observable current density decay after 30 h of chronoamperometry *** work not only highlights heteroatom induction to tune the electronic structure but also provides a facile approach for developing advanced and stable oxygen evolution reaction electrocatalysts with abundant heterointerfaces.

关键词： electronic transfer Fe exchange multi-metal phosphides OER electrocatalysts structural evolution

Resilient sliding mode control for 2D CPSs under denial-of-service attacks

在线全文

同方期刊数据库

学校读者我要写书评

暂无评论

science China(Information sciences) 2024年第6期67卷 262-278页

作者： Lingling LI Rongni YANG Zhiguang FENG Ligang WU College of Intelligent Systems science and engineering Harbin Engineering University School of Control science and engineering Shandong University School of Astronautics Harbin Institute of Technology

This study addresses the resilient sliding mode control(SMC) problem for two-dimensional cyber-physical systems(2D CPSs) characterized by the Roesser model under denial-of-service attack(DoSA), which can interfere with signal transmission over the communication network. First, the DoS-A model is established by introducing constraints on the Do S frequency and duration. Then, based on active or silent attack situations, the considered system is described as a switched mode. Furthermore, together with Lyapunov theory, the average dwell time technique is employed to deduce sufficient criteria that assure the existence of the desired sliding mode controller. Finally, verification examples are provided to show the validity of the established SMC scheme.

关键词： two-dimensional systems cyber-physical systems denial-of-service attack resilient sliding mode control

Preparation of CIP@TiO_(2) composite with broadband electromagnetic wave absorption properties

在线全文

同方期刊数据库

学校读者我要写书评

暂无评论

International Journal of Minerals,Metallurgy and Materials 2024年第1期31卷 197-205页

作者： Qiang Su Hanqun Wang Yunfei He Dongdong Liu Xiaoxiao Huang Bo Zhong School of Materials science and engineering Harbin Institute of TechnologyWeihaiWeihai 264209China School of Materials science and engineering Harbin Institute of TechnologyHarbin 150001China

Scholars aim for the improved impedance matching (Z) of materials while maintaining their excellent wave absorption properties. Based on the hydrolysis characteristics of isopropyl titanate, a simple preparation process for the coating of carbonyl iron powder(CIP) with TiO_(2) was designed. Given the TiO2coating, the Z of the CIP@TiO_(2) composite was adjusted well by decreasing the dielectric constant. Moreover, the interfacial polarization of CIP@TiO_(2) was enhanced. Ultimately, the electromagnetic-wave (EMW) absorption property of the CIP@TiO_(2)composite was improved substantially, the minimum reflection loss reached-46.07 dB, and the effective absorption bandwidth can reach 8 GHz at the composite thickness of 1.5 mm. Moreover, compared with CIP, the oxidation resistance of CIP@TiO_(2)showed remarkable improvement. The results revealed that the oxidation starting temperature of CIP@TiO_(2) as about 400℃,whereas the uncoated CIP had an oxidation starting temperature of approximately 250℃. Moreover, the largest oxidation rate temperature of CIP@TiO_(2) increased to around 550℃. This work opens up a novel strategy for the production of high-performance EMW absorbers via structural design.

关键词： carbonyl iron@titanium dioxide electromagnetic-wave absorption impedance matching oxidation resistance

维普期刊数据库

Carbon felt electrode coated with WS2 enables a high-performance polysulfide/ferricyanide flow battery

在线全文

学校读者我要写书评

暂无评论

Rare Metals 2024年第10期43卷 5039-5047页

作者： Liang-Yu Li Su Yan Ying-Jia Huang Fang-Fang Zhong Jin-Chao Cao Mei Ding Chuan-Kun Jia College of Materials science and engineering Changsha University of Science and Technology institute of Energy Storage Technology College of Energy and Power EngineeringChangsha University of Science and Technology Binzhou institute of Technology Weiqiao-UCAS Science and Technology Park

Polysulfide/ferricyanide flow batteries （S/Fe RFBs）,with the advantages of abundant earth reservation low cost,high safety,and environmental friendliness,have attracted significant interest and demonstrated noteworthy potential for practical ***,the battery performance,including the energy efficiency （EE）,voltage efficiency （VE）,and power density of the S/Fe RFBs remains low owing to the slow redox kinetics of polysulfide *** address these concerns,WS2was selected as the booster and deposited on a commercial carbon felt electrode （WS2–CF） to stimulate the redox reactions of polysulfide *** better hydrophilicity and smaller charge-transfer resistance,WS2–CF exhibits enhanced electrochemical activity toward polysulfide redox ***,the battery performance of S/Fe RFB with WS2–CF as the anode has been improved,with EE of 84%,VE of 84%,and a peak power density of 175.7 mW·cm-2,which are all higher than the cell only with the bare carbon felt （CF） as electrodes (76%,77% and 155.8 mW·cm-2,respectively).Furthermore,the cycling life of the S/Fe RFB with WS2–CF has been prolonged to 2200 cycles with a capacity retention of 96% a 40 mA·cm-2because of the good stability of WS2–CF as the ***,under the same conditions,the S/Fe RFB without WS2–CF terminated after 1500 cycles with a fast capacity *** successful utilization of WS2as a booster on an electrode provides an efficient strategy for obtaining advanced S/Fe RFBs for practical applications.

关键词： Carbon felt Energy storage Polysulfide/ferricyanide flow battery Tungsten disulfide

Cobalt phosphide-based composites as anodes for lithium-ion batteries:From mechanism,preparation to performance

在线全文

同方期刊数据库

学校读者我要写书评

暂无评论

Particuology 2024年第5期88卷 11-31页

作者： Bo Lan Yishan Wang Jialei Lu Dongdong Liu Chuncheng Wei Xueqian Zhang Xiaoxiao Huang Guangwu Wen School of Materials science and engineering Shandong University of TechnologyZibo255000China School of Materials science and engineering Harbin Institute of TechnologyHarbin150001China School of Materials science and engineering Harbin Institute of TechnologyWeihai264209China

With the further requirements of electronic products and powered vehicles,the development of a new generation with low-voltage and high-capacity anode materials is crucial for lithium-ion batteries(LIBs).Transition metal phosphides,especially cobalt phosphide(CoP)composites,have become a research hotspot for LIBs anode materials in recent years due to their high theoretical specific capacity,low polarization,and suitable voltage *** review first systematically discusses the lithium storage mechanism and preparation methods of CoP in current ***,the applications of CoP anode materials in LIBs are categorically reviewed,including the composites of CoP with various types of carbon materials and ***,the challenges and future development directions of CoP anode materials are summarized to provide guidance for further improving the lithium storage performance of CoP and its practical applications.

关键词： CoP Composites Preparation Anodes Lithium-ion batteries

the Shandong Electric Power engineering Consulting institute science and technology project(Grant No.37-K2014-33).

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Fluid Dynamics & Materials Processing 2021年第1期17卷 123-139页

作者： Mengyuan Cao Yi Xu Yilin Dong institute of Biothermal science&Technology University of Shanghai for Science and TechnologyShanghai200093China

The damage caused by thermal stress during rewarming vitrified biosamples is one of the major obstacles for clinical *** warming is a highly effective approach to overcome this hurdle and can achieve rapid and spatially homogeneous *** current research investigates the effects of magnetic warming on the histological and biomechanical properties of the vitrified umbilical arteries(UAs)through experiments and *** results of experiments show that,for the case of magnetic warming comparing with the conventional water bath,magnetic warming presents better preservation of extracellular matrix(ECM),collagen fibers,elastic fibers,and muscle fibers of the umbilical *** is no significant difference between magnetothermal and fresh UAs(p>0.05)in the elastic modulus and the ultimate *** theoretical results reveal that the maximum temperature difference Tmax inside the biosample is 1.117±0.649℃,and the maximum thermal stressmax is 0.026±0.016 ***,for the case of conventional water bath,Tmax is 32.342±0.967℃andmax is 1.453±0.047 ***,we have arrived at the same conclusion by simulation as theoretical calculation ***,magnetic warming can effectively reduce the thermal stress damage of biological samples during the warming period due to more uniform and rapid *** results confirm that magnetothermal can significantly improve the mechanical properties of large size cryopreserved tissues or organs such as UAs.

关键词： Umbilical artery vitrified magnetic warming mechanical properties thermal stress