检索结果-南通市图书馆

Consolidation of high replacement ratio stone column-reinforced ground:Analytical solutions incorporating clogging effect

在线全文

学校读者我要写书评

暂无评论

Journal of Rock Mechanics and Geotechnical engineering 2024年第8期16卷 3311-3326页

作者： Jinxin Sun Mengmeng Lu Baolong Xu Jie Shan School of Mechanics and Civil engineering China University of Mining and TechnologyXuzhou221116China Key Laboratory for Geomechanics and Deep Underground engineering China University of Mining and TechnologyXuzhou221006China

The utilization of stone columns has emerged as a popular ground improvement strategy,whereas the drainage performance can be adversely hampered by clogging *** the ample progress of calculation methods for the consolidation of stone column-improved ground,theoretical investigations into the clogging effect have not been thoroughly ***,it is imperative to involve the column consolidation deformation to mitigate computational error on the consolidation of composite ground with high replacement *** this context,an analytical model accounting for the initial clogging and coupled time and depth-dependent clogging of stone columns is ***,the resulting governing equations and analytical solutions are obtained under a new flow continuity relationship to incorporate column consolidation *** accuracy and reliability of the proposed model are illustrated by degradation analysis and case studies with good ***,the computed results of the current study are juxtaposed against the existing models,and an in-depth assessment of the impacts of several crucial parameters on the consolidation behavior is *** results reveal that ignoring column consolidation deformation leads to an overestimate of the consolidation rate,with maximum error reaching up to 16%as the replacement ratio ***,the initial clogging also has a significant influence on the consolidation ***,the increment of depth and time-clogging factors a and b will induce a noticeable retardation of the consolidation process,particularly in the later stage.

关键词： Consolidation Composite ground Stone column Clogging effect Ground improvement Analytical model

Predicting microseismic,acoustic emission and electromagnetic radiation data using neural networks

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Journal of Rock Mechanics and Geotechnical engineering 2024年第2期16卷 616-629页

作者： Yangyang Di Enyuan Wang Zhonghui Li Xiaofei Liu Tao Huang Jiajie Yao School of Materials engineering Changshu Institute of TechnologySuzhou215506China Key Laboratory of Gas and Fire Control for Coal Mines(china university of mining and technology) Ministry of EducationXuzhou221116China School of Safety engineering China University of Mining and TechnologyXuzhou221116China State Key Laboratory of Coal Resources and Safe mining China University of Mining and TechnologyXuzhou221116China

Microseism,acoustic emission and electromagnetic radiation(M-A-E)data are usually used for predicting rockburst ***,it is a great challenge to realize the prediction of M-A-E *** this study,with the aid of a deep learning algorithm,a new method for the prediction of M-A-E data is *** this method,an M-A-E data prediction model is built based on a variety of neural networks after analyzing numerous M-A-E data,and then the M-A-E data can be *** predicted results are highly correlated with the real data collected in the *** field verification,the deep learning-based prediction method of M-A-E data provides quantitative prediction data for rockburst monitoring.

关键词： Microseism Acoustic emission Electromagnetic radiation Neural networks Deep learning Rockburst

Actively tuning anisotropic light-matter interaction in biaxial hyperbolic materialα-MoO_(3) using phase change material VO_(2) and graphene

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Chinese Physics B 2024年第4期33卷 631-638页

作者：周昆胡杨吴必园仲晓星吴小虎 School of Safety engineering China University of Mining and TechnologyXuzhou 221116China Key Laboratory of Gas and Fire Control for Coal Mines China University of Mining and TechnologyXuzhou 221116China Shandong institute of Advanced technology Jinan 250100China School of Power and Energy Northwestern Polytechnical UniversityXi'an 710072China

Anisotropic hyperbolic phonon polaritons(PhPs)in natural biaxial hyperbolic materialα-MoO_(3) has opened up new avenues for mid-infrared nanophotonics,while active tunability ofα-MoO_(3) PhPs is still an urgent problem necessarily to be *** this study,we present a theoretical demonstration of actively tuningα-MoO_(3) PhPs using phase change material VO_(2) and *** is observed thatα-MoO_(3) PhPs are greatly dependent on the propagation plane angle of *** insulator-to-metal phase transition of VO_(2) has a significant effect on the hybridization PhPs of theα-MoO_(3)/VO_(2) structure and allows to obtain actively tunableα-MoO_(3) PhPs,which is especially obvious when the propagation plane angle of PhPs is ***,when graphene surface plasmon sources are placed at the top or bottom ofα-MoO_(3) inα-MoO_(3)/VO_(2)structure,tunable coupled hyperbolic plasmon-phonon polaritons inside its Reststrahlen bands(RB s)and surface plasmonphonon polaritons outside its RBs can be *** addition,the above-mentionedα-MoO_(3)-based structures also lead to actively tunable anisotropic spontaneous emission(SE)*** study may be beneficial for realization of active tunability of both PhPs and SE ofα-MoO_(3),and facilitate a deeper understanding of the mechanisms of anisotropic light-matter interaction inα-MoO_(3) using functional materials.

关键词： light-matter interaction hyperbolic material phase change material graphene

Research on Iron Loss of Switched Reluctance Starter/Generator for Energy Storage

在线全文

学校读者我要写书评

暂无评论

Protection and Control of Modern Power Systems 2024年第4期9卷 147-159页

作者： Hao Chen Xing Wang Yongqiang Liu Vuong Dang Quoc Wenju Yan Muhammad Saqib Antonino Musolino Guanjun Wang Yong Qi Ali Asghar Memon Alexandros G.Paspatis the Shenzhen Research institute China University of Mining and TechnologyShenzhen 515100China the School of Electrical engineering China University of Mining and TechnologyXuzhou 221116China Xinjiang institute of engineering Urumqi 830000China the International Joint Research Center of Central and Eastern European Countries on New Energy EV technology and Equipment Xuzhou 221008China the International Cooperation Joint Laboratory of New Energy Power Generation and EVs of jiangsu Province Colleges and Universities Xuzhou 221008China the xuzhou Key Laboratory of New Energy EV technology and Equipment Xuzhou 221008China the the School of Electrical engineering China University of Mining and Tech-nologyXuzhou 221116China the Laboratory of High Performance Electric Machines(HiPems) Hanoi VN 10000Viet Nam the university of engineering and technology Lahore 54890Pakistan the Department of Energy Pisa Uni-versity of PisaPisa IT 56126Italy the Wuxi Inspection and Testing Certification Research institute Wuxi 214000China the Nanjing university of Science&Tech-nology Nanjing 210094China the Mehran university of Engi-neering&technology Jamshoro PK 76062Sindh the National Technical university of Athens Zografou GR 15780Attica

In order to better realize the energy recovery and storage of hybrid EVs(HEVs),a switched reluctance starter/generator(SRS/G)with both starting and power generation functions is investigated in this ***,the iron loss of SRS/G is mainly studied to reduce the motor loss and improve the power generation ***,the energy storage of hybrid EVs can be effectively ***,a magnetic flux density(MFD)waveforms solution method is proposed to solve the difficulty in calculating the iron loss of the SRS/*** with the commonly used finite element method,the proposed solution method has the advantages of simple,fast and small computational ***,considering the different operating conditions of SRS/G,the iron loss models for both the time-domain and frequency-domain are *** addition,the calculation formula of the variable coefficient Bertotti three-term loss separation is *** the hysteresis loss coefficient,the Steinmetz coefficient and the stray loss coefficient are respectively fitted by the Fourier fitting *** method is also applied to solve the iron loss of SRS/***,through an experimental verification,it is indicated that the development of proposed method has high accuracy.

关键词： Switched reluctance starter/generator energy storage iron loss finite element method magnetic flux density(MFD)

Cu-Based Materials for Enhanced C_(2+) Product Selectivity in Photo-/Electro-Catalytic CO_(2) Reduction: Challenges and Prospects

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Nano-Micro Letters 2024年第4期16卷 25-66页

作者： Baker Rhimi Min Zhou Zaoxue Yan Xiaoyan Cai Zhifeng Jiang institute for Energy Research School of Chemistry and Chemical EngineeringJiangsu UniversityZhenjiang 212013People’s Republic of China School of Materials Science and Physics China University of Mining and TechnologyXuzhou 221116People’s Republic of China

Carbon dioxide conversion into valuable products using photocatalysis and electrocatalysis is an effective approach to mitigate global environmental issues and the energy shortages. Among the materials utilized for catalytic reduction of CO_(2), Cu-based materials are highly advantageous owing to their widespread availability, cost-effectiveness, and environmental sustainability. Furthermore, Cu-based materials demonstrate interesting abilities in the adsorption and activation of carbon dioxide, allowing the formation of C_(2+) compounds through C–C coupling process. Herein, the basic principles of photocatalytic CO_(2) reduction reactions(PCO_(2)RR) and electrocatalytic CO_(2) reduction reaction(ECO_(2)RR) and the pathways for the generation C_(2+) products are introduced. This review categorizes Cu-based materials into different groups including Cu metal, Cu oxides, Cu alloys, and Cu SACs, Cu heterojunctions based on their catalytic applications. The relationship between the Cu surfaces and their efficiency in both PCO_(2)RR and ECO_(2)RR is emphasized. Through a review of recent studies on PCO_(2)RR and ECO_(2)RR using Cu-based catalysts, the focus is on understanding the underlying reasons for the enhanced selectivity toward C_(2+) products. Finally, the opportunities and challenges associated with Cu-based materials in the CO_(2) catalytic reduction applications are presented, along with research directions that can guide for the design of highly active and selective Cu-based materials for CO_(2) reduction processes in the future.

关键词： Photocatalytic CO_(2)reduction Cu-based materials Electrocatalytic CO_(2)reduction

Predicting torsional capacity of reinforced concrete members by data-driven machine learning models

在线全文

学校读者我要写书评

暂无评论

Frontiers of Structural and Civil engineering 2024年第3期18卷 444-460页

作者： Shenggang CHEN Congcong CHEN Shengyuan LI Junying GUO Quanquan GUO Chaolai LI School of Mechanics and Civil engineering China University of Mining and TechnologyXuzhou 211116China jiangsu Key Laboratory Environmental Impact and Structural Safety in engineering China University of Mining and TechnologyXuzhou 211116China china Nuclear Power Design Co.Ltd. Shenzhen 518031China School of transportation and science engineering Beihang UniversityBeijing 100191China china Construction First Group Corporation Limited Beijing 100161China

Due to the complicated three-dimensional behaviors and testing limitations of reinforced concrete(RC)members in torsion,torsional mechanism exploration and torsional performance prediction have always been *** the present paper,several machine learning models were applied to predict the torsional capacity of RC *** results of a total of 287 torsional specimens were collected through an overall literature *** of extreme gradient boosting machine(XGBM),random forest regression,back propagation artificial neural network and support vector machine,were trained and tested by 10-fold cross-validation *** performances of proposed machine learning models were evaluated and compared,both with each other and with the calculated results of existing design codes,i.e.,GB 50010,ACI 318-19,and Eurocode *** results demonstrated that better predictive performance was achieved by machine learning models,whereas GB 50010 slightly overestimated the torsional capacity,and ACI 318-19 and Eurocode 2 underestimated it,especially in the case of ACI *** XGBM model gave the most favorable predictions with R^(2)=0.999,RMSE=1.386,MAE=0.86,andλ=***,strength of concrete was the most sensitive input parameters affecting the reliability of the predictive model,followed by transverse-to-longitudinal reinforcement ratio and total reinforcement ratio.

关键词： RC members torsional capacity machine learning models design codes

Application of integrated geophysical techniques in geothermal exploration in Binhai County, jiangsu Province

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Deep Underground Science and engineering 2024年第3期3卷 338-348页

作者： Juncheng Wang Shiyin Gao Jianguo Wang Lin Li Xiaoyan Gong Jinbao Su College of Oceanography Hohai UniversityNanjingChina School of Earth Sciences and engineering Hohai UniversityNanjingChina Geological Exploration technology institute of jiangsu Province NanjingChina jiangsu engineering Research Center for Aeronautical Earth Exploration and Intelligent Sensing NanjingChina School of Mechanics and Civil engineering China University of Mining and TechnologyXuzhouChina State Key Laboratory for Geomechanics and Deep Underground engineering China University of Mining and TechnologyXuzhouChina

Integrated geophysical technology is a necessary and effective means for geothermal ***,integration of geophysical technology for large‐scale surveys with those for geothermal reservoir localization is still in *** study used the controlled source audio‐frequency magnetotelluric method technology for large‐scale exploration to obtain underground electrical structure information and micromotion detection technology to obtain underground wave velocity structure *** combination of two detection technologies was used for local identification of geothermal ***,auxiliary correction and inversion constraint were implemented through the audio magnetotelluric sounding technology for maximum authenticity restoration of the near‐and transition‐field *** these technology improvements,a geothermal geological model was established for the Binhai County of jiangsu Province in china and potential geothermal well locations were *** this basis,a geothermal well was drilled nearly 3000m deep,with a daily water volume of over 2000m3/day and a geothermal water temperature of 51°C at the well *** is found that predictions using the above integrated geophysical exploration technology are in good agreement with the well geological formation *** integrated geophysical technology can be effectively applied for geothermal exploration with high precision and reliability.

关键词： controlled source audio frequency magnetotelluric method(CSAMT) geothermal exploration integrated geophysical technology micromotion detection technology

An improved elastoplastic model for rocks and application to cyclic loading and unloading triaxial compression tests

在线全文

学校读者我要写书评

暂无评论

Acta Mechanica Sinica 2024年第8期40卷 179-193页

作者： Qiuxin Gu Qiang Zhang Yapeng Li Peinan Wu Guilei Han State Key Laboratory for Geomechanics and Deep Underground engineering School of Mechanics and Civil EngineeringChina University of Mining and TechnologyXuzhou221116China North china engineering Investigation institute Shijiazhuang050021China

The recoverable strain of rock is completely classified as elastic strain in the conventional elastic-plastic theory,which often results in poor agreement between theoretical and experimental *** work proposes an improved elastoplastic model of rock materials considering the evolutions of crack deformation and elastic modulus to better characterize the nonlinear mechanical behavior of rock in the post-peak *** this model,the recoverable strain is assumed to be a combination of elastic and crack strain,and the constitutive relationship between crack strain and rock stress is *** on the proposed assumption,the evolutions of the mechanical parameters including strength parameters,elastic,plastic,and crack deformation parameters versus the plastic strain and confining stress were *** developed elastoplastic model was validated by comparing the theoretical values with the results of the triaxial cyclic loading and unloading *** theoretical calculation results show a good agreement with the laboratory test,which indicates that the improved elastoplastic model can effectively reflect the nonlinear mechanical behavior of the rock *** research results are expected to provide a valuable reference for further understanding the evolution of rock crack deformation.

关键词： Crack strain Elastic modulus deterioration Novel elastoplastic model Model validation

Research on shell-side heat and mass transfer with multi-component in LNG spiral-wound heat exchanger under sloshing conditions

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Petroleum Science 2024年第2期21卷 1333-1345页

作者： Xue-Ping Du Guang-Lei Yu Ya-Cheng Xu Zhi-Jie Chen Nai-Liang Li Huan-Guang Wang School of Low-carbon Energy and Power engineering China University of Mining and TechnologyXuzhou221116JiangsuChina Key Laboratory of Thermo-Fluid Science and engineering MOEXi'an Jiaotong UniversityXi'an710049ShaanxiChina Xi'an Aerospace Propulsion Test technology institute Xi'an710100ShaanxiChina

The spiral-wound heat exchanger(SWHE) is the primary low-temperature heat exchanger for large-scale LNG plants due to its high-pressure resistance, compact structure, and high heat exchange efficiency. This paper studied the shell-side heat and mass transfer characteristics of vapor-liquid two-phase mixed refrigerants in an SWHE by combining a multi-component model in FLUENT software with a customized multicomponent mass transfer model. Besides, the mathematical model under the sloshing condition was obtained through mathematical derivation, and the corresponding UDF code was loaded into FLUENT as the momentum source term. The results under the sloshing conditions were compared with the relevant parameters under the steady-state condition. The shell-side heat and mass transfer characteristics of the SWHE were investigated by adjusting the component ratio and other working conditions. It was found that the sloshing conditions enhance the heat transfer performance and sometimes have insignificant effects. The sloshing condition is beneficial to reduce the flow resistance. The comprehensive performance of multi-component refrigerants has been improved and the improvement is more significant under sloshing conditions, considering both the heat transfer and pressure *** results will provide theoretical support for the research and design of multi-component heat and mass transfer enhancement of LNG SWHE under ocean sloshing conditions.

关键词： Spiral-wound heat exchanger Sloshing conditions Two-phase flow Multi-component Heat and mass transfer