检索结果-南通市图书馆

Study of the Transport Behavior of Multispherical Proppant in Intersecting Fracture Based on Discrete Element Method

引用

Energy engineering 2025年第1期122卷 185-201页

作者： Chengyong Peng JianshuWu Mao Jiang Biao Yin Yishan Lou CNOOC Research institute Company Limited Beijing100028China School of Petroleum engineering Yangtze UniversityWuhan430100China Hubei Key Laboratory of Oil and Gas Drilling and production engineering(Yangtze University) Wuhan430100China

To analyze the differences in the transport and distribution of different types of proppants and to address issues such as the short effective support of proppant and poor placement in hydraulically intersecting fractures,this study considered the combined impact of geological-engineering factors on *** reservoir production parameters and the discrete elementmethod,multispherical proppants were ***,a 3D fracture model,based on the specified conditions of the L block,employed coupled(Computational Fluid Dynamics)CFD-DEM(Discrete ElementMethod)for joint simulations to quantitatively analyze the transport and placement patterns of multispherical proppants in intersecting *** indicate that turbulent kinetic energy is an intrinsic factor affecting proppant ***,the efficiency of placement and migration distance of low-sphericity quartz sand constructed by the DEM in the main fracture are significantly reduced compared to spherical ceramic proppants,with a 27.7%decrease in the volume fraction of the fracture surface,subsequently affecting the placement concentration and damaging fracture *** to small-angle fractures,controlling artificial and natural fractures to expand at angles of 45°to 60°increases the effective support length by approximately 20.6%.During hydraulic fracturing of gas wells,ensuring the fracture support area and post-closure conductivity can be achieved by controlling the sphericity of proppants and adjusting the perforation direction to control the direction of artificial fractures.

关键词： Hydraulic fracturing discrete element method proppant sphericity CFD-DEM

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

High-dense nanocrystalline W-based alloy prepared by hot isostatic pressing with uniform microstructure, ultrahigh hardness and good thermal stability

引用

Tungsten 2025年第1期7卷 120-136页

作者： Zao-Ming Wu Lin He Lin-Sen Ye Xiao-Feng Yang Jia-Jia Zhang Hong-Bo Lei institute of Materials China Academy of Engineering Physics

High-density uniform microstructure nanocrystalline W-10wt.% Cr-5wt.% Y（W-10Cr-5Y） alloy with an average grain size of 85 nm and a relative density of 99.8% was successfully prepared.W-Cr-Y alloys with different amounts of second-phase particles were prepared by high-energy ball milling and hot isostatic pressing *** effects of composition design,ball milling parameters,and sintering parameters on the microstructure of W-Cr-Y alloys were studied.A feasible technology for controlling the synthesis of high-density nanocrystalline W-based alloys has been *** microstructure analysis of nanocrystalline W-10Cr-5Y alloy shows that there are two types of doping in the second phase:intergranular doping and intragranular *** "uniform distribution YOx-rich particles" effectively suppresses the grain growth of W and leads to the formation of nanocrystalline W-10Cr-5Y alloy.W-10Cr-5Y has an ultra-high hardness,with a Vickers hardness of 1312±12 kgf·***-temperature annealing treatment shows that W-10Cr-5Y has good thermal stability at 1000 and1100℃,as demonstrated by the comparison of Vickers hardness and grain size between annealed and unannealed alloys.

关键词： Hot isostatic pressing Microstructure Nanocrystalline tungsten Thermal stability Vickers hardness

来源：

同方期刊数据库评论

在线全文

同方期刊数据库

学校读者我要写书评

暂无评论

Molecular dynamics simulation:The key to reveal the enrichment mechanisms of helium

引用

Science China Earth Sciences 2025年

作者： Wenhui LIU Department of Geology Northwest University Petroleum Exploration and production Research institute SINOPEC

In recent years,helium and its enrichment mechanisms have been the frontier and attractive research in the field of geological resources (Liu et al.,2024).In the earliest geosciences,noble gases and their isotopes,including helium,were used as tracers for geochronology and geological processes due to their chemical inertness and *** attention has been paid to the isotope composition in geological ***,as an important resource,the research on the source,migration and accumulation of helium is critically important.

关键词：

来源：

同方期刊数据库评论

在线全文

同方期刊数据库

学校读者我要写书评

暂无评论

Precise gradient separation of nanoparticles using reduced graphene oxide-polyoxomolybdate membranes

引用

Science China Chemistry 2025年第1期68卷 209-216页

作者： Yixin Yang Wanlei Zhao Ruoxuan Zheng Hongqiang Li Wei Chen Yu-Fei Song State Key Laboratory of Chemical Resource engineering Beijing University of Chemical Technology Quzhou institute for Innovation in Resource Chemical engineering

The purification and size sieving of nanoparticles （NPs） represents a significant scientific ***,the r GO-polyoxometalates (POMs=PMo12,Mo132and Mo368) membranes were fabricated successfully via a simple and scalable POMsassisted in-situ photoreduction *** the mass ratio of r GO to PMo12was 1:30,the resultant r GO-PMo12membranes with highly ordered and uniform nanochannels of 1.0 nm can be obtained,which showed an accurate carbon quantum dots（CQDs） separation with a cut-off size approximately 1.0 *** increase of the size of the interlayered POMs from PMo12（1.0 nm）,{Mo132}（2.9 nm） to{Mo368}（3.8 nm）,the resultant r GO-PMo12,r GO-Mo132and r GO-Mo368exhibited precise gradient separation of CQDs and Au nanoparticles by size exclusion *** results pave a promising way to construct new twodimensional （2D） membranes for highly efficient size-selective separation.

关键词： reduced graphene oxide polyoxometalates membranes gradient separation nanoparticles

来源：

同方期刊数据库评论

在线全文

同方期刊数据库

学校读者我要写书评

暂无评论

Comparative Evaluation and Performance Analysis of Heat Exchangers Featured with Peened Surface

引用

Journal of Thermal Science 2025年第1期34卷 50-61页

作者： DINESHBABU Chinnadurai SHIVA SANKARAN Nallasamy VENKATESH RAJA Krishnan VENKATESH Rathinavelu Department of Mechanical engineering Kongunadu College of Engineering and Technology Department of Mechanical engineering Selvam College of Technology Department of Mechanical engineering Sona College of Technology Department of Mechanical engineering Saveetha School of EngineeringSaveetha Institute of Medical and Technical Sciences (SIMATS)Saveetha University

Heat exchangers have the potential for various engineering applications,and their performance is enriched by surface *** proposed system enriches the heat exchanger's performance by adapting a peened stainless steel（SS） surface blasted with copper,grinding,sand,and *** influences peened SS surface modified with a copper blast,grinding,sandblast,and iron blast on the surface morphology of shell and tube heat exchanger surface（STHE） is analyzed via tungsten heated cathode electron gun featured scanning electron microscope and observed coarse grain *** SS surface featured STHE performance is experimentally evaluated by different flow rates（30,60,90,and 120 L/min） underwater fluid medium functioned by the temperature ranges of 25-75℃ and its results are compared with computational fluid dynamic（CFD）/heat transfer research（HTRI） analyzed *** 60 L/min flow rate was spotted as an optimum value for both shell and tube side *** STHE is operated with a 60 L/min flow rate under the different peened surfaces and evaluated its Stanton number,Nusselt number,logarithmic mean temperature difference（LMTD）,overall heat transfer coefficient,number of transfer units（NTU）,effectiveness,and exergy *** iron blasted SS peened surface was observed to have better SHTE performance like Stanton number（0.0012）,Nusselt number（2180）,reduced LMTD of 31℃,improved overall heat transfer co-efficient of 2400 W/（m2·K）,better NTU of 0.5532,good effectiveness value of 0.451 62,and hiked exergy efficiency of 10% respectively.

关键词： penned surface performance analysis shell and tube heat exchanger stainless steel

来源：

同方期刊数据库评论

在线全文

同方期刊数据库

学校读者我要写书评

暂无评论

Automatic and Rapid Throughflow-Based Optimal Design Method for Multi-Stage Axial-Flow Compressors

引用

Journal of Thermal Science 2025年第1期34卷 77-91页

作者： LEI Fan ZHANG Xiawen JU Yaping ZHANG Chuhua Department of Fluid Machinery and engineering School of Energy and Power EngineeringXi'an Jiaotong University production and Environmental Department China Huaneng Group.Co.Ltd. State Key Laboratory for Strength and Vibration of Mechanical Structures Xi'an Jiaotong University

Throughflow design has the advantages of less time consumption and large optimization space,and thus is the corner stone of advanced design system of multi-stage axial-flow *** majority of relevant studies were limited to the throughflow inverse designs,and quite few works have been till now devoted to the throughflow optimal *** this work,an automatic and rapid throughflow-based optimal design method is proposed for axial-flow compressors in which a throughflow inverse design solver is embedded in optimal genetic algorithm to improve the design efficiency of axial-flow *** types of design parameters in the throughflow inverse design of axial-flow compressors,i.e.,swirl and shroud curve,are simultaneously used to optimize both the blade shape and flow *** proposed method is validated by the redesign optimization of the benchmark axial-flow compressor NASA Stage 35,and the CFD predictions show that the throughflow-based optimization leads to 1.18% efficiency benefit at design *** proposed method is then utilized to the two-dimensional throughflow optimal design of a large-scale 6.5-stage axial-flow industrial *** optimal design results are confirmed by CFD predictions,indicating that the proposed method can effectively improve the design adiabatic efficiency of the compressors by 1.09% within a few minutes on desk-top *** throughflow design implications are also obtained for advanced axial-flow industrial *** work could enhance the capability of throughflow design method and has engineering application value to explore the throughflow optimization space of multi-stage axial-flow compressors.

关键词： NASA

来源：

同方期刊数据库评论

在线全文

同方期刊数据库

学校读者我要写书评

暂无评论

Numerical Simulation of Radiation Transport to Improve Microalgae Cultivation in an Air-Lift Photobioreactor

引用

Journal of Thermal Science 2025年第1期34卷 62-76页

作者： ZHANG Xianbin LI Mingjia HUNG Tzuchen ZHANG Zixun Key Laboratory of Thermo-Fluid Science and engineering of Ministry of Education School of Energy and Power EngineeringXi'an Jiaotong University School of Mechanical engineering Beijing Institute of Technology Department of Mechanical engineering Taipei University of Technology

A comprehensive numerical model is developed to simulate the growth of microalgae under light/dark cycling *** purpose of this study is to predict the growth rate of Chlorella vulgaris cultivated in photobioreactors(PBRs) in order to improve the light conditions for microalgae and enhance the photosynthetic *** fluid dynamics(CFD) is used to simulate its internal hydrodynamic *** Lagrangian method is employed to track the movement of microalgae *** radiative transfer equation(RTE)is used to obtain light intensity *** combination of light radiation field and microalgae cell motions is used to construct the light history and they are integrated into the model of the photosynthetic units(PSU) to calculate the microalgae growth *** numerical results demonstrate that enhanced light/dark cycling frequency with ordered mixing can promote efficient microalgae *** effect of the vortex flow field generated by the baffles in an air-lift PBR is analyzed for increasing microalgae growth *** using the 1:1 baffle spacing,the biomass production of microalgae is increased by 41.8% compared to the original PBR.

关键词： light distribution particle tracking photobioreactor structure optimization

来源：

同方期刊数据库评论

在线全文

同方期刊数据库

学校读者我要写书评

暂无评论

Targets capture by distributed active swarms via bio-inspired reinforcement learning

引用

Science China(Physics,Mechanics & Astronomy) 2025年第1期Mechanics & Astronomy) .卷 210-221页

作者： Kun Xu Yue Li Jun Sun Shuyuan Du Xinpeng Di Yuguang Yang Bo Li institute of Biomechanics and Medical engineering Applied Mechanics Laboratory Department of Engineering MechanicsTsinghua University institute of Nuclear and New Energy Technology Tsinghua University Shanghai Aerospace Control Technology institute Shanghai Key Laboratory of Aerospace Intelligent Control Technology College of Automation engineering Nanjing University of Aeronautics and Astronautics

Natural swarms arranged from cells to herds are usually decentralized but display intriguing collective intelligence in coordinating individuals across large scales to efficiently achieve their common goals. Learning from nature may provide new strategies for controlling collective dynamics of synthetic swarms to accomplish specific functions. Here, we present a bioinspired computational framework that steers distributed active swarms to collectively capture and merge targets via reinforcement learning. We exploit collective milling structures of natural herds to cage the targets, and adopt a switching control policy inspired by sperms' chiral dynamics to optimize the trajectories of individuals, through which the active swarms can selforganize to enclose single or multiple distant targets in a dynamical, adaptive and scalable manner. There exists a critical swarm size, beyond which the excessive competition between agents would generate large mechanical forces, leading to capture instability but enabling the transition from short-distance to long-distance merging capture of multiple targets. This work provides physical insights into distributed active swarms and could offer a multilevel, decentralized strategy toward controlling swarm robotics in wide applications such as bio-medical devices, machine immunity, and target clearance.

关键词： swarm intelligence robotics multi-tasks artificial intelligence bionics

来源：

同方期刊数据库评论

在线全文

同方期刊数据库

学校读者我要写书评

暂无评论

Photoinduced radical sulfur dioxide insertion with asymmetric cyclization of alkenes: accessing β-chiral sulfones bearing S-stereocentric cyclic sulfinamides

引用

Science China Chemistry 2025年第1期68卷 257-263页

作者： Jiapian Huang Chenxin Wang Xu Wang Xiaoyu Zhou Wei Xiao Jie Wu School of Pharmaceutical and Chemical engineering & institute for Advanced Studies Taizhou University State Key Laboratory of Organometallic Chemistry Shanghai Institute of Organic Chemistry Chinese Academy of Sciences School of Chemistry and Chemical engineering Henan Normal University

The generation of various β-chiral sulfones bearing chiral cyclic sulfinamides through photoredox-catalyzed sulfur dioxide insertion with asymmetric radical cyclization is described. This method features a broad substrate scope and excellent stereospecificity. Computational studies reveal that the dispersion interaction between sulfinyl group and CH2SO2Ph group plays a crucial role in the stereoselectivity control.

关键词： β-chiral sulfones chiral cyclic sulfinamides sulfur dioxide insertion asymmetric radical cyclization stereoselectivity

来源：

同方期刊数据库评论

在线全文

同方期刊数据库

学校读者我要写书评

暂无评论

Unlocking the stable interface in aqueous zinc-ion battery with multifunctional xylose-based electrolyte additives

引用

Journal of Energy Chemistry 2025年第1期100卷 770-778页

作者： Xiaoqin Li Jian Xiang Lu Qiu Xiaohan Chen Yinkun Zhao Yujue Wang Qu Yue Taotao Gao Wenlong Liu Dan Xiao Zhaoyu Jin Panpan Li institute for Advanced Study Chengdu University School of Mechanical engineering Chengdu University College of Food and Biological engineering Chengdu University institute of Fundamental and Frontier Sciences University of Electronic Science and Technology of China College of Materials Science and engineering Sichuan University

The growth of dendrites and the side reactions occurring at the Zn anode pose significant challenges to the commercialization of aqueous Zn-ion batteries（AZIBs）. These challenges arise from the inherent conflict between mass transfer and electrochemical kinetics. In this study, we propose the use of a multifunctional electrolyte additive based on the xylose（Xylo） molecule to address these issues by modulating the solvation structure and electrode/electrolyte interface, thereby stabilizing the Zn anode. The introduction of the additive alters the solvation structure, creating steric hindrance that impedes charge transfer and then reduces electrochemical kinetics. Furthermore, in-situ analyses demonstrate that the reconstructed electrode/electrolyte interface facilitates stable and rapid Zn2+ion migration and suppresses corrosion and hydrogen evolution reactions. As a result, symmetric cells incorporating the Xylo additive exhibit significantly enhanced reversibility during the Zn plating/stripping process, with an impressively long lifespan of up to 1986 h, compared to cells using pure ZnSO4electrolyte. When combined with a polyaniline cathode, the full cells demonstrate improved capacity and long-term cyclic stability. This work offers an effective direction for improving the stability of Zn anode via electrolyte design, as well as highperformance AZIBs.

关键词： Solvation

来源：

同方期刊数据库评论

在线全文

同方期刊数据库

学校读者我要写书评

暂无评论

欢迎您,

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

请选择保存的检索档案：

请选择收藏分类：

通借通还

欢迎您,

建议与咨询 留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

请选择保存的检索档案： 新增检索档案 确定 取消

请选择收藏分类： 新增自定义分类 确定 取消

通借通还

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

请选择保存的检索档案：

请选择收藏分类：