检索结果-南通市图书馆

Supramolecular polymer-based gel fracturing fluid with a double network applied in ultra-deep hydraulic fracturing

petroleum Science 2024年第3期21卷 1875-1888页

作者： Yong-Ping Huang Yong Hu Chang-Long Liu Yi-Ning Wu Chen-Wei Zou Li-Yuan Zhang Ming-Wei Zhao Cai-Li Dai School of petroleum Engineering China University of Petroleum(East China) Shandong Key Laboratory of Oilfield chemistry China University of Petroleum(East China) SINOPEC petroleum Exploration and Production Research institute CNOOC China Co Ltd Tianjin Branch

A gel based on polyacrylamide, exhibiting delayed crosslinking characteristics, emerges as the preferred solution for mitigating degradation under conditions of high temperature and extended shear in ultralong wellbores. High viscosity/viscoelasticity of the fracturing fluid was required to maintain excellent proppant suspension properties before gelling. Taking into account both the cost and the potential damage to reservoirs, polymers with lower concentrations and molecular weights are generally preferred. In this work, the supramolecular action was integrated into the polymer, resulting in significant increases in the viscosity and viscoelasticity of the synthesized supramolecular polymer system.The double network gel, which is formed by the combination of the supramolecular polymer system and a small quantity of Zr-crosslinker, effectively resists temperature while minimizing permeability damage to the reservoir. The results indicate that the supramolecular polymer system with a molecular weight of(268—380) × 10～4g/mol can achieve the same viscosity and viscoelasticity at 0.4 wt% due to the supramolecular interaction between polymers, compared to the 0.6 wt% traditional polymer(hydrolyzed polyacrylamide, molecular weight of 1078 × 10～4g/mol). The supramolecular polymer system possessed excellent proppant suspension properties with a 0.55 cm/min sedimentation rate at 0.4 wt%, whereas the0.6 wt% traditional polymer had a rate of 0.57 cm/min. In comparison to the traditional gel with a Zrcrosslinker concentration of 0.6 wt% and an elastic modulus of 7.77 Pa, the double network gel with a higher elastic modulus(9.00 Pa) could be formed only at 0.1 wt% Zr-crosslinker, which greatly reduced the amount of residue of the fluid after gel-breaking. The viscosity of the double network gel was66 m Pa s after 2 h shearing, whereas the traditional gel only reached 27 m Pa s.

关键词： Ultra-deep reservoir Gel fracturing fluid Double network Supramolecular polymer system Proppant suspension property

来源：

同方期刊数据库评论

在线全文

同方期刊数据库

学校读者我要写书评

暂无评论

A reweighted damped singular spectrum analysis method for robust seismic noise suppression

引用

petroleum Science 2024年第3期21卷 1671-1682页

作者： Wei-Lin Huang Yan-Xin Zhou Yang Zhou Wei-Jie Liu Ji-Dong Li State Key Laboratory of petroleum Resources and Engineering China University of Petroleum (Beijing) SINOPEC petroleum Exploration and Production Research institute SINOPEC Geophysical Research institute

(Multichannel) Singular spectrum analysis is considered as one of the most effective methods for seismic incoherent noise suppression. It utilizes the low-rank feature of seismic signal and regards the noise suppression as a low-rank reconstruction problem. However, in some cases the seismic geophones receive some erratic disturbances and the amplitudes are dramatically larger than other receivers. The presence of this kind of noise, called erratic noise, makes singular spectrum analysis(SSA) reconstruction unstable and has undesirable effects on the final results. We robustify the low-rank reconstruction of seismic data by a reweighted damped SSA(RD-SSA) method. It incorporates the damped SSA, an improved version of SSA, into a reweighted framework. The damping operator is used to weaken the artificial disturbance introduced by the low-rank projection of both erratic and random noise. The central idea of the RD-SSA method is to iteratively approximate the observed data with the quadratic norm for the first iteration and the Tukeys bisquare norm for the rest iterations. The RD-SSA method can suppress seismic incoherent noise and keep the reconstruction process robust to the erratic disturbance. The feasibility of RD-SSA is validated via both synthetic and field data examples.

关键词： Singular spectrum analysis Damping operator Seismic erratic noise Seismic signal processing Robust low-rank reconstruction

来源：

同方期刊数据库评论

在线全文

同方期刊数据库

学校读者我要写书评

暂无评论

Analysis of mechanical strengths of extreme line casing joint considering geometric, material, and contact nonlinearities

引用

petroleum Science 2024年第3期21卷 1992-2004页

作者： Ji-Yun Zhang Chi Peng Jian-Hong Fu Quan Cao Yu Su Jian-Yun Pang Zi-Qiang Yu petroleum Engineering School Southwest Petroleum University Engineering Technology Research institute of CNPC Southwest Oil and Gas Field Company

To address the challenges associated with difficult casing running, limited annular space, and poor cementing quality in the completion of ultra-deep wells, the extreme line casing offers an effective solution over conventional casings. However, due to its smaller size, the joint strength of extreme line casing is reduced, which may cause failure when running in the hole. To address this issue, this study focuses on the CST-ZT Φ139.7 mm × 7.72 mm extreme line casing and employs the elastic-plastic mechanics to establish a comprehensive analysis of the casing joint, taking into account the influence of geometric and material nonlinearities. A finite element model is developed to analyze the forces and deformations of the extreme line casing joint under axial tension and external collapse load. The model investigates the stress distribution of each thread tooth subjected to various tensile forces and external pressures. Additionally, the tensile strength and crushing strength of the extreme line casing joint are determined through both analytical and experimental approaches. The findings reveal that, under axial tensile load, the bearing surface of each thread tooth experiences uneven stress, with relatively high equivalent stress at the root of each thread tooth. The end thread teeth are valuable spots for failure. It is observed that the critical fracture axial load of thread decreases linearly with the increase of thread tooth sequence. Under external pressure, the circumferential stress is highest at the small end of the external thread, leading to yield deformation. The tensile strength of the joint obtained from the finite element model exhibits a relative error of less than 7% compared to the analytical and experimental values,proving the reliability of the finite element model. The tensile strength of the joint is 3091.9 k N.Moreover, in terms of anti-collapse capability, the joints demonstrate higher resistance to collapse compared to the casing body, which is consistent with the test results where the pip

关键词： Extreme line casing Elastic-plastic mechanics Finite element analysis Tensile strength Collapse strength

来源：

同方期刊数据库评论

在线全文

同方期刊数据库

学校读者我要写书评

暂无评论

Ligand effect in surface atomic sites of group VI B transition metals on ultrathin Pt nanowires for enhanced oxygen reduction

引用

Nano Research 2024年第6期17卷 5298-5304页

作者： Yuwei He Yueguang Chen Renjie Wu Zhihe Xiao Mengxian Li Chunfeng Shi Leyu Wang State Key Laboratory of Chemical Resource Engineering College of ChemistryBeijing University of Chemical TechnologyBeijing 100029China State Key Laboratory of petroleum Molecular and Process Engineering SINOPEC Research Institute of Petroleum Processing Co.Beijing 100083China

Increasing the utilization efficiency of platinum is critical for advancing proton exchange-membrane fuel cells(PEMFCs).Despite extensive research on catalysts for the cathodic oxygen reduction reaction(ORR),developing highly active and durable Pt-based catalysts that can suppress surface dealloying in corrosive acid conditions remains challenging.Herein,we report a facile synthesis of bimetallic ultrathin PtM(M=Mo,W,and Cr)nanowires(NWs)composed of group VI B transition metal atomic sites anchored on the surface.These NWs possess uniform sizes and well-controlled atomic arrangements.Compared to PtW and PtCr catalysts,the PtMo0.05 NWs exhibit the highest half-wave potential of 0.935 V and a mass activity of 1.43 A·mgPt^(−1).Remarkably,they demonstrate a remarkable 23.8-fold enhancement in mass activity compared to commercial Pt/C for ORR,surpassing previously reported Pt-based catalysts.Additionally,the PtMo NWs cathode in membrane electrode assembly tests achieves a remarkable peak power density of 1.443 W·cm^(−2)(H_(2)-O_(2)conditions at 80℃),which is 1.09 times that of commercial Pt/C.The ligand effect in the bimetallic surface not only facilitates strong coupling between Mo(4d)and Pt(5d)atomic orbitals to hinder atom leaching but also modulates the d-states of active site,significantly optimizing the adsorption of key oxygen(*O and*OH)species and accelerating the rate-determining step in ORR pathways.

关键词： ligand effect oxygen reduction reaction group VI B transition metal ultrathin nanowires multiple oxygen species

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Linear-fitting-based recursive filtering for nonlinear systems under encoding-decoding mechanism

引用

Science China(Information Sciences) 2024年第5期67卷 183-196页

作者： Bo JIANG Hongli DONG Zhiwei GAO Yuxuan SHEN Fan YANG Artificial Intelligence Energy Research institute Northeast Petroleum University Heilongjiang Provincial Key Laboratory of Networking and Intelligent Control Sanya Offshore Oil & Gas Research institute Northeast Petroleum University School of Electrical & Information Engineering Northeast Petroleum University

This paper deals with a recursive filtering problem for a class of discrete time-varying nonlinear networked systems with the encoding-decoding mechanism. The linear fitting method is introduced to handle the nonlinearity. An encoding-decoding mechanism is constructed to describe the data transmission process in wireless communication networks(WCNs). To be specific, the measurement outputs are mapped by a quantizer to unique codewords for transmission in WCNs. Then, the codewords are decoded by the decoder to recover the measurement outputs which are sent to the filter. The processing/encoding delay and network delay have been considered. Firstly, on the premise that the upper bound of the filtering error covariance is minimum, the appropriate filtering gain is calculated. Then, the mean square exponential boundedness of the filtering error is analyzed. Finally, two simulation examples are presented to verify the effectiveness of the proposed algorithm.

关键词： encoding-decoding mechanism uniform quantizer linear fitting networked systems recursive filtering

来源：

同方期刊数据库评论

在线全文

同方期刊数据库

学校读者我要写书评

暂无评论

Effect of bubble morphology and behavior on power consumption in non-Newtonian fluids’aeration process

引用

Chinese Journal of Chemical Engineering 2024年第1期65卷 243-254页

作者： Xiemin Liu Jing Wan Jinnan Sun Lin Zhang Feng Zhang Zhibing Zhang Xinyao Li Zheng Zhou Key Laboratory of Mesoscopic chemistry of Ministry of Education(MOE) School of Chemistry and Chemical EngineeringNanjing UniversityNanjing 210023China Dalian Research institute of petroleum and Petrochemicals SINOPECDalian 116045China

Due to a prolonged operation time and low mass transfer efficiency, the primary challenge in the aeration process of non-Newtonian fluids is the high energy consumption, which is closely related to the form and rate of impeller, ventilation, rheological properties and bubble morphology in the reactor. In this perspective, through optimal computational fluid dynamics models and experiments, the relationship between power consumption, volumetric mass transfer rate(kLa) and initial bubble size(d0) was constructed to establish an efficient operation mode for the aeration process of non-Newtonian fluids. It was found that reducing the d0could significantly increase the oxygen mass transfer rate, resulting in an obvious decrease in the ventilation volume and impeller speed. When d0was regulated within 2-5 mm,an optimal kLa could be achieved, and 21% of power consumption could be saved, compared to the case of bubbles with a diameter of 10 mm.

关键词： Non-Newtonian fluids aeration process Power consumption Volumetric mass transfer rate Bubble size

来源：

维普期刊数据库

同方期刊数据库博看期刊评论

在线全文

学校读者我要写书评

暂无评论

Effects of acid-rock reaction on physical properties during CO_(2)-rich industrial waste gas(CO_(2)-rich IWG)injection in shale reservoirs

引用

petroleum Science 2024年第1期21卷 272-285页

作者： Yi-Fan Wang Jing Wang Hui-Qing Liu Xiao-Cong Lv Ze-Min Ji National Key Laboratory of petroleum Resources and Engineering China University of PetroleumBeijing102249China MOE Key Laboratory of petroleum Engineering China University of PetroleumBeijing102249China Research institute of Exploration and Development PetroChinaBeijing100083China

"Carbon peaking and carbon neutrality"is an essential national strategy,and the geological storage and utilization of CO_(2)is a hot issue today.However,due to the scarcity of pure CO_(2)gas sources in China and the high cost of CO_(2)capture,CO_(2)-rich industrial waste gas(CO_(2)-rich IWG)is gradually emerging into the public's gaze.CO_(2)has good adsorption properties on shale surfaces,but acidic gases can react with shale,so the mechanism of the CO_(2)-rich IWG-water-shale reaction and the change in reservoir properties will determine the stability of geological storage.Therefore,based on the mineral composition of the Longmaxi Formation shale,this study constructs a thermodynamic equilibrium model of water-rock reactions and simulates the regularity of reactions between CO_(2)-rich IWG and shale minerals.The results indicate that CO_(2)consumed 12%after reaction,and impurity gases in the CO_(2)-rich IWG can be dissolved entirely,thus demonstrating the feasibility of treating IWG through water-rock reactions.Since IWG inhibits the dissolution of CO_(2),the optimal composition of CO_(2)-rich IWG is 95%CO_(2)and 5%IWG when CO_(2)geological storage is the main goal.In contrast,when the main goal is the geological storage of total CO_(2)-rich IWG or impurity gas,the optimal CO_(2)-rich IWG composition is 50%CO_(2)and 50%IWG.In the CO_(2)-rich IWG-water-shale reaction,temperature has less influence on the water-rock reaction,while pressure is the most important parameter.SO2 has the greatest impact on water-rock reaction in gas.For minerals,clay minerals such as illite and montmorillonite had a significant effect on water-rock reaction.The overall reaction is dominated by precipitation and the volume of the rock skeleton has increased by 0.74 cm3,resulting in a decrease in shale porosity,which enhances the stability of CO_(2)geological storage to some extent.During the reaction between CO_(2)-rich IWG-water-shale at simulated temperatures and pressures,precipitation is the main reaction,and shale porosity decrease

关键词： CO_(2)-rich industrial waste gas Geological storage Acid-rock reaction Shale Geochemical modelling

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Machine learning for carbonate formation drilling: Mud loss prediction using seismic attributes and mud loss records

引用

petroleum Science 2024年第2期21卷 1241-1256页

作者： Hui-Wen Pang Han-Qing Wang Yi-Tian Xiao Yan Jin Yun-Hu Lu Yong-Dong Fan Zhen Nie National Key Laboratory of petroleum Resources and Engineering China University of Petroleum(Beijing)Beijing102249China College of Science China University of Petroleum-BeijingBeijing102249China petroleum Exploration and Production Research institute SINOPECBeijing102206China College of petroleum Engineering China University of Petroleum-BeijingBeijing102249China Research institute of petroleum Exploration and Development CNPCBeijing100083China

Due to the complexity and variability of carbonate formation leakage zones, lost circulation prediction and control is one of the major challenges of carbonate drilling. It raises well-control risks and production expenses. This research utilizes the H oilfield as an example, employs seismic features to analyze mud loss prediction, and produces a complete set of pre-drilling mud loss prediction solutions. Firstly, 16seismic attributes are calculated based on the post-stack seismic data, and the mud loss rate per unit footage is specified. The sample set is constructed by extracting each attribute from the seismic trace surrounding 15 typical wells, with a ratio of 8:2 between the training set and the test set. With the calibration results for mud loss rate per unit footage, the nonlinear mapping relationship between seismic attributes and mud loss rate per unit size is established using the mixed density network model.Then, the influence of the number of sub-Gausses and the uncertainty coefficient on the model's prediction is evaluated. Finally, the model is used in conjunction with downhole drilling conditions to assess the risk of mud loss in various layers and along the wellbore trajectory. The study demonstrates that the mean relative errors of the model for training data and test data are 6.9% and 7.5%, respectively, and that R2is 90% and 88%, respectively, for training data and test data. The accuracy and efficacy of mud loss prediction may be greatly enhanced by combining 16 seismic attributes with the mud loss rate per unit footage and applying machine learning methods. The mud loss prediction model based on the MDN model can not only predict the mud loss rate but also objectively evaluate the prediction based on the quality of the data and the model.

关键词： Lost circulation Risk prediction Machine learning Seismic attributes Mud loss records

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Modeling of multiphase flow in low permeability porous media:Effect of wettability and pore structure properties

引用

Journal of Rock Mechanics and Geotechnical Engineering 2024年第4期16卷 1127-1139页

作者： Xiangjie Qin Yuxuan Xia Juncheng Qiao Jiaheng Chen Jianhui Zeng Jianchao Cai National Key Laboratory of petroleum Resources and Engineering China University of PetroleumBeijing102249China Research institute of petroleum Exploration and Development Beijing10083China

Multiphase flow in low permeability porous media is involved in numerous energy and environmental applications.However,a complete description of this process is challenging due to the limited modeling scale and the effects of complex pore structures and wettability.To address this issue,based on the digital rock of low permeability sandstone,a direct numerical simulation is performed considering the interphase drag and boundary slip to clarify the microscopic water-oil displacement process.In addition,a dual-porosity pore network model(PNM)is constructed to obtain the water-oil relative permeability of the sample.The displacement efficiency as a recovery process is assessed under different wetting and pore structure properties.Results show that microscopic displacement mechanisms explain the corresponding macroscopic relative permeability.The injected water breaks through the outlet earlier with a large mass flow,while thick oil films exist in rough hydrophobic surfaces and poorly connected pores.The variation of water-oil relative permeability is significant,and residual oil saturation is high in the oil-wet system.The flooding is extensive,and the residual oil is trapped in complex pore networks for hydrophilic pore surfaces;thus,water relative permeability is lower in the water-wet system.While the displacement efficiency is the worst in mixed-wetting systems for poor water connectivity.Microporosity negatively correlates with invading oil volume fraction due to strong capillary resistance,and a large microporosity corresponds to low residual oil saturation.This work provides insights into the water-oil flow from different modeling perspectives and helps to optimize the development plan for enhanced recovery.

关键词： Low permeability porous media Water-oil flow Wettability Pore structures Dual porosity pore network model(PNM) Free surface model

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Comparative study between three carbonaceous nanoblades and nanodarts for antimicrobial applications

引用

Journal of Environmental Sciences 2024年第2期136卷 594-605页

作者： Mohamed S.Selim Ahmed M.Azzam Mohamed A.Shenashen Shimaa A.Higazy Bayaumy B.Mostafa Sherif A.El-Safty National institute for Materials Science(NIMS) 1-2-1 SengenTsukuba-ShiIbaraki-Ken 305-0047Japan petroleum Application Department Egyptian Petroleum Research InstituteNasr City 11727Egypt Department of Environmental Research Theodor Bilharz Research InstituteGizaEgypt

The design of nanostructured materials occupies a privileged position in the development and management of affordable and effective technology in the antibacterial sector.Here,we discuss the antimicrobial properties of three carbonaceous nanoblades and nanodarts materials of graphene oxide(GO),reduced graphene oxide(RGO),and single-wall carbon nanotubes(SWCNTs)that have a mechano-bactericidal effect,and the ability to piercing or slicing bacterial membranes.To demonstrate the significance of size,morphology and composition on the antibacterial activity mechanism,the designed nanomaterials have been characterized.The minimum inhibitory concentration(MIC),standard agar well diffusion,and transmission electron microscopy were utilized to evaluate the antibacterial activity of GO,RGO,and SWCNTs.Based on the evidence obtained,the three carbonaceous materials exhibit activity against all microbial strains tested by completely encapsulating bacterial cells and causing morphological disruption by degrading the microbial cell membrane in the order of RGO>GO>SWCNTs.Because of the external cell wall structure and outer membrane proteins,the synthesized carbonaceous nanomaterials exhibited higher antibacterial activity against Gram-positive bacterial strains than Gram-negative and fungal microorganisms.RGO had the lowest MIC values(0.062,0.125,and 0.25 mg/mL against B.subtilis,S.aureus,and E.coli,respectively),as well as minimum fungal concentrations(0.5 mg/mL for both A.fumigatus and C.albicans).At 12 hr,the cell viability values against tested microbial strains were completely suppressed.Cell lysis and death occurred as a result of severe membrane damage caused by microorganisms perched on RGO nanoblades.Our work gives an insight into the design of effective graphene-based antimicrobial materials for water treatment and remediation.

关键词： Antimicrobial properties Nanoblades Mechano-bactericidal effect RGO nanosheets Gram-positive bacteria Cell viability

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

欢迎您,

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

请选择保存的检索档案：

请选择收藏分类：

通借通还

欢迎您,

建议与咨询 留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

请选择保存的检索档案： 新增检索档案 确定 取消

请选择收藏分类： 新增自定义分类 确定 取消

通借通还

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

请选择保存的检索档案：

请选择收藏分类：