检索结果-南通市图书馆

Optimizing 2D-metal contact in layered Tin-selenide via native oxide modulation

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Nano Research 2024年第4期17卷 3014-3020页

作者： Yue Zheng Qi You Zhentian Yin Jian Tang Ke Jiang Zihao Xie Henan Li Cheng Han Yumeng Shi International Collaborative Laboratory of 2D Materials for optoelectronics Science and technology of Ministry of Education Institute of Microscale OptoelectronicsShenzhen UniversityShenzhen 518060China College of Electronics and Information Engineering Shenzhen UniversityShenzhen 518060China

The discovery of two-dimensional(2D)semiconductor has opened up new avenues for the development of short-channel field-effect transistors(FETs)with desired electrical performance.Among them,orthorhombic tin-selenide(SnSe)has garnered increasing attention due to its potential applications in a variety of electronic,optoelectronic,and thermoelectric devices.However,the realization of high-performance SnSe FETs with low contact resistance(Rc)remains a challenge.Herein,we systematically investigate the contact of few-layer SnSe FETs through the modulation of native oxide on SnSe by using different metals.It is found that chromium(Cr)-contacted devices possess the best FET performance,such as electron mobility up to 606 cm^(2)/(V·s)at 78 K,current on/off ratio exceeding 1010,and saturation current of~550μA/μm,where a negligible Schottky barrier(SB)of~30 meV and a low contact resistance of~425Ωμm are achieved.X-ray photoelectron spectroscopy(XPS)and cross-sectional electron dispersive X-ray spectroscopy(EDX)results further reveal that the improved contact arises from the Cr-induced reduction of native oxide(SnOx)to Sn,which thins the tunneling barrier for efficient electron injection.Our findings provide a deep insight into the 2D-metal contact of SnSe and pave the way for its applications in future nanoelectronics.

关键词： few-layer SnSe field-effect transistors(FETs) Cr contact native oxide contact resistance(Rc) Schottky barrier(SB)

Recent Developments in Metallic Degradable Micromotors for Biomedical and Environmental Remediation Applications

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Nano-Micro Letters 2024年第3期16卷 1-35页

作者： Sourav Dutta Seungmin Noh Roger Sanchis Gual Xiangzhong Chen Salvador Pané Bradley J.Nelson Hongsoo Choi Department of Robotics and Mechatronics Engineering Daegu Gyeongbuk Institute of Science and Technology(DGIST)Daegu 42988Republic of Korea DGIST‑ETH Microrobotics Research Center DGISTDaegu 42988Republic of Korea Multi‑Scale Robotics Lab Institute of Robotics and Intelligent SystemsETH Zurich8092 ZurichSwitzerland institute of optoelectronics State Key Laboratory of Photovoltaic Science and TechnologyShanghai Frontiers Science Research Base of Intelligent Optoelectronics and PerceptionFudan UniversityShanghai 200433People’s Republic of China

Synthetic micromotor has gained substantial attention in biomedicine and environmental remediation.Metal-based degradable micromotor composed of magnesium(Mg),zinc(Zn),and iron(Fe)have promise due to their nontoxic fuel-free propulsion,favorable biocompatibility,and safe excretion of degradation products Recent advances in degradable metallic micromotor have shown their fast movement in complex biological media,efficient cargo delivery and favorable biocompatibility.A noteworthy number of degradable metal-based micromotors employ bubble propulsion,utilizing water as fuel to generate hydrogen bubbles.This novel feature has projected degradable metallic micromotors for active in vivo drug delivery applications.In addition,understanding the degradation mechanism of these micromotors is also a key parameter for their design and performance.Its propulsion efficiency and life span govern the overall performance of a degradable metallic micromotor.Here we review the design and recent advancements of metallic degradable micromotors.Furthermore,we describe the controlled degradation,efficient in vivo drug delivery,and built-in acid neutralization capabilities of degradable micromotors with versatile biomedical applications.Moreover,we discuss micromotors’efficacy in detecting and destroying environmental pollutants.Finally,we address the limitations and future research directions of degradable metallic micromotors.

关键词： Magnesium Zinc Iron Biodegradable microrobot Biomedical Environmental

All laser direct writing process for temperature sensor based on graphene and silver

在线全文

学校读者我要写书评

暂无评论

Frontiers of optoelectronics 2024年第1期17卷 45-55页

作者： Qi Li Ruijie Bai Lianbo Guo Yang Gao Shanghai Key Laboratory of Intelligent Sensing and Detection technology School of Mechanical and Power EngineeringEast China University of Science and TechnologyShanghai 200237China North Automatic Control technology institute Taiyuan 030006China Wuhan National Laboratory for optoelectronics Huazhong University of Science&TechnologyWuhan 430074China

A highly sensitive temperature sensing array is prepared by all laser direct writing(LDW)method,using laser induced silver(LIS)as electrodes and laser induced graphene(LIG)as temperature sensing layer.A finite element analysis(FEA)photothermal model incorporating a phase transition mechanism is developed to investigate the relationship between laser parameters and LIG properties,providing guidance for laser processing parameters selection with laser power of 1–5 W and laser scanning speed(greater than 50 mm/s).The deviation of simulation and experimental data for widths and thickness of LIG are less than 5%and 9%,respectively.The electrical properties and temperature responsiveness of LIG are also studied.By changing the laser process parameters,the thickness of the LIG ablation grooves can be in the range of 30–120μm and the resistivity of LIG can be regulated within the range of 0.031–67.2Ω・m.The percentage temperature coefficient of resistance(TCR)is calculated as−0.58%/°C.Furthermore,the FEA photothermal model is studied through experiments and simulations data regarding LIS,and the average deviation between experiment and simulation is less than 5%.The LIS sensing samples have a thickness of about 14μm,an electrical resistivity of 0.0001–100Ω・m is insensitive to temperature and pressure stimuli.Moreover,for a LIS-LIG based temperature sensing array,a correction factor is introduced to compensate for the LIG temperature sensing being disturbed by pressure stimuli,the temperature measurement difference is decreased from 11.2 to 2.6°C,indicating good accuracy for temperature measurement.

关键词： Laser direct writing Temperature sensor Finite element analysis Laser induced graphene Laser induced silver

Exploring the Roles of Single Atom in Hydrogen Peroxide Photosynthesis

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Nano-Micro Letters 2024年第2期16卷 32-67页

作者： Kelin He Zimo Huang Chao Chen Chuntian Qiu Yu Lin Zhong Qitao Zhang International Collaborative Laboratory of 2D Materials for optoelectronics Science and technology of Ministry of Education Institute of Microscale OptoelectronicsShenzhen UniversityShenzhen 518000China Queensland Micro‑and Nanotechnology Centre School of Environment and ScienceGriffith UniversityNathanQLD 4222Australia institute for Sustainable Transformation School of Chemical Engineering and Light IndustryGuangdong University of TechnologyGuangzhou 51006China ZJU‑Hangzhou Global Scientific and Technological Innovation Center Zhejiang UniversityHangzhou 311215China

This comprehensive review provides a deep exploration of the unique roles of single atom catalysts(SACs)in photocatalytic hydrogen peroxide(H_(2)O_(2))production.SACs offer multiple benefits over traditional catalysts such as improved efficiency,selectivity,and flexibility due to their distinct electronic structure and unique properties.The review discusses the critical elements in the design of SACs,including the choice of metal atom,host material,and coordination environment,and how these elements impact the catalytic activity.The role of single atoms in photocatalytic H_(2)O_(2)production is also analysed,focusing on enhancing light absorption and charge generation,improving the migration and separation of charge carriers,and lowering the energy barrier of adsorption and activation of reactants.Despite these advantages,several challenges,including H_(2)O_(2)decomposition,stability of SACs,unclear mechanism,and low selectivity,need to be overcome.Looking towards the future,the review suggests promising research directions such as direct utilization of H_(2)O_(2),high-throughput synthesis and screening,the creation of dual active sites,and employing density functional theory for investigating the mechanisms of SACs in H_(2)O_(2)photosynthesis.This review provides valuable insights into the potential of single atom catalysts for advancing the field of photocatalytic H_(2)O_(2)production.

关键词： Single atom catalysts H_(2)O_(2)photosynthesis Catalyst design and optimization

LP modes exchange based on multiplane light conversion

在线全文

学校读者我要写书评

暂无评论

Chinese Optics Letters 2024年第3期22卷 14-18页

作者：钟亚楠林楚璇方浚丞雷霆袁小聪 Nanophotonics Research Centre Shenzhen Key Laboratory of Micro-Scale Optical Information Technology&Institute of Microscale OptoelectronicsShenzhen UniversityShenzhen 518060China

Data exchange between different mode channels is essential in the optical communication network with mode-division multiplexing(MDM).However,there are challenges in realizing mode exchange with low insert loss,low mode crosstalk,and high integration.Here,we designed and fabricated a mode exchange device based on multiplane light conversion(MPLC),which supports the transmission of LP01,LP11a,LP11b,and LP21 modes in the C-band and L-band.The simulated exchanged mode purities are greater than 85%.The phase masks were fabricated on a silicon substrate to facilitate the integration with optical systems,with an insert loss of less than 2.2 dB and mode crosstalk below-21 dB due primarily to machining inaccuracies and alignment errors.We carried out an optical communication experiment with 10 Gbit/s OOK and QPSK data transmission at the wavelength of 1550 nm and obtained excellent performance with the device.It paves the way for flexible data exchange as a building block in MDM optical communication networks.

关键词： mode exchange mode-division multiplexing multiplane light conversion

Interlayer exciton dynamics of transition metal dichalcogenide heterostructures under electric fields

在线全文

学校读者我要写书评

暂无评论

Nano Research 2024年第5期17卷 4555-4572页

作者： Jian Tang Yue Zheng Ke Jiang Qi You Zhentian Yin Zihao Xie Henan Li Cheng Han Xiaoxian Zhang Yumeng Shi International Collaborative Laboratory of 2D Materials for optoelectronics Science and technology of Ministry of Education Institute of Microscale OptoelectronicsShenzhen UniversityShenzhen 518060China College of Electronics and Information Engineering Shenzhen UniversityShenzhen 518060China Key Laboratory of Luminescence and Optical Information Ministry of EducationInstitute of Optoelectronic TechnologyBeijing Jiaotong UniversityBeijing 100044China

Stacking single layers of atoms on top of each other provides a fundamental way to achieve novel material systems and engineer their physical properties,which offers opportunities for exploring fundamental physics and realizing next-generation optoelectronic devices.Among the two-dimensional(2D)-stacked systems,transition metal dichalcogenide(TMDC)heterostructures are particularly attractive because they host tightly-bonded interlayer excitons which possess various novel and appealing properties.These interlayer excitons have drawn significant research attention and hold high potential for the application in unique optoelectronic devices,such as polarization-and wavelength-tunable single photon emitters,valley Hall transistors,and possible high-temperature superconductors.The development of these devices requires a comprehensive understanding of the fundamental properties of these interlayer excitons and the impact of electric fields on their behaviors.In this review,we summarize the recent advances on the understanding of interlayer exciton dynamics under electric fields in TMDC heterostructures.We put emphasis on the electrical modulation of interlayer excitons’emission,the valley Hall transport of charge carriers after the separation of interlayer excitons by an electric field,and the correlation physics of interlayer excitons and charges under electrical doping and tuning.Challenges and perspectives are finally discussed for the application of TMDC heterostructures in future optoelectronics.

关键词： interlayer exciton transition metal dichalcogenide(TMDC)heterostructures circular polarization valley Hall effect strong coupling

Improved photocatalytic performance of acetaldehyde degradation via crystal plane regulation on truncated octahedral CeO2

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Rare Metals 2024年第5期43卷 2026-2038页

作者： Bin Xu Lu Jia Hui Yang Yue Wang Si-Yu Fan Sai-Sai Yuan Qi-Tao Zhang Ming Zhang Teruhisa Ohno School of Chemistry and Chemical Engineering Yangzhou University College of Environmental Science and Engineering Yangzhou University Department of Applied Chemistry Faculty of EngineeringKyushu Institute of Technology School of Environmental and Chemical Engineering Jiangsu University of Science and Technology National & Local Joint Engineering Research Center for Mineral Salt Deep Utilization Huaiyin Institute of Technology School of Materials Science and Engineering Henan University of Science and Technology International Collaborative Laboratory of 2D Materials for optoelectronics Science and technology of Ministry of Education Institute of Microscale Optoelectronics Shenzhen University

In this study,the truncated octahedral Ce O2（Ce O2-to） with special morphology was prepared by the solvothermal method with oleic acid （OA） and oleamine（OM） as the morphology-directing agents.High-resolution transmission electron microscopy （HRTEM） results show that Ce O2-to exposes composite{100}and{111}facets,while Ce O2cubic （Ce O2-c） and Ce O2octahedral （Ce O2-o）only expose single crystal facets of{100}plane and{111}plane,respectively.Interestingly,this Ce O2-to photocatalyst exhibits remarkable photooxidation performance of gaseous acetaldehyde （CH3CHO） degradation,in which CO2generation value reaches 1.78 and 7.97-times greater than that of Ce O2-c and Ce O2-o,respectively.In addition,the active species trapping experiment signifies that superoxide （·O2-） and holes （h+） are the main reactive substances during the CH3CHO degradation process,and the electron paramagnetic resonance （EPR） spectra indicates that the former is the major contributor.Notably,the electron transfer mechanism between Ce O2-to{100}and{111}facets and the surface oxygen adsorption ability are revealed via density functional theory （DFT） calculations.It is also confirmed that{100}facets are more conducive to the absorption of acetaldehyde than{111}facets.Finally,a reasonable mechanism for improved photocatalytic CH3CHO degradation on Ce O2-to is proposed based on relevant experiments and DFT calculations.This study demonstrates that the systematic development of surface homojunction structured photocatalysts can efficiently increase the degradation activity for volatile organic compounds （VOCs）.It also offers additional direction for optimizing the photocatalytic activity of other ceriumbased photocatalysts.

关键词： Truncated octahedral CeO 2 (CeO 2 -to) Composite crystal faces Surface energy level Efficient electron transfer

digital micromirror device;flat-top beam;orbital angular momentum;perfect vortex beam;random fiber laser

在线全文

同方期刊数据库

学校读者我要写书评

暂无评论

High Power Laser Science and Engineering 2024年第1期12卷 42-51页

作者： Rui Ma Ke Hai Luo Jing Song He Wei Li Zhang Dian Yuan Fan Anderson S.L.Gomes Jun Liu International Collaborative Laboratory of 2D Materials for optoelectronics Science and technology of Ministry of Education Institute of Microscale OptoelectronicsShenzhen UniversityShenzhenChina institute for Advanced Study Shenzhen UniversityShenzhenChina Fiber Optics Research Centre School of Information and Communication EngineeringUniversity of Electronic Science and Technology of ChinaChengduChina Departamento de Física Universidade Federal de PernambucoRecife-PEBrazil

High-intensity vortex beams with tunable topological charges and low coherence are highly demanded in applications such as inertial confinement fusion(ICF) and optical communication. However, traditional optical vortices featuring nonuniform intensity distributions are dramatically restricted in application scenarios that require a high-intensity vortex beam owing to their ineffective amplification resulting from the intensity-dependent nonlinear effect. Here, a low-coherence perfect vortex beam(PVB) with a topological charge as high as 140 is realized based on the super-pixel wavefront-shaping technique. More importantly, a globally adaptive feedback algorithm(GAFA) is proposed to efficiently suppress the original intensity fluctuation and achieve a flat-top PVB with dramatically reduced beam speckle contrast. The GAFA-based flat-top PVB generation method can pave the way for high-intensity vortex beam generation,which is crucial for potential applications in ICF, laser processing, optical communication and optical trapping.

关键词： digital micromirror device flat-top beam orbital angular momentum perfect vortex beam random fiber laser

Molecular packing tuning via chlorinated end group enables efficient binary organic solar cells over 18.5%

在线全文

学校读者我要写书评

暂无评论

Carbon Energy 2024年第3期6卷 196-203页

作者： Yafeng Li Zhenyu Chen Xingzheng Yan Ziyi Ge Zhejiang Business technology institute NingboZhejiangChina Zhejiang Engineering Research Center for Energy Optoelectronic Materials and Devices Ningbo Institute of Materials Technology and EngineeringChinese Academy of SciencesNingboZhejiangChina Center of Materials Science and optoelectronics Engineering University of Chinese Academy of SciencesBeijingChina

Designing novel nonfullerene acceptors(NFAs)is of vital importance for the development of organic solar cells(OSC).Modification on the side chain and end group are two powerful tools to construct efficient NFAs.Here,based on the high-performance L8BO,we selected 3-ethylheptyl to substitute the inner chain of 2-ethylhexyl,obtaining the backbone of BON3.Then we introduced different halogen atoms of fluorine and chlorine on 2-(3-oxo-2,3-dihydro-1Hinden-1-ylidene)malononitrile end group(EG)to construct efficient NFAs named BON3-F and BON3-Cl,respectively.Polymer donor D18 was chosen to combine with two novel NFAs to construct OSC devices.Impressively,D18:BON3-Cl-based device shows a remarkable power conversion efficiency(PCE)of 18.57%,with a high open-circuit voltage(V_(OC))of 0.907 V and an excellent fill factor(FF)of 80.44%,which is one of the highest binary PCE of devices based on D18 as the donor.However,BON3-F-based device shows a relatively lower PCE of 17.79%with a decreased FF of 79.05%.The better photovoltaic performance is mainly attributed to the red-shifted absorption,higher electron and hole mobilities,reduced charge recombination,and enhanced molecular packing in the D18:BON3-Cl films.Also,we performed stability tests on two binary systems;the D18:BON3-Cl and D18:BON3-F devices maintain 88.1%and 85.5%of their initial efficiencies after 169 h of storage at 85°C in an N2-filled glove box,respectively.Our work demonstrates the importance of selecting halogen atoms on EG and provides an efficient binary system of D18:BON3-Cl for further improvement of PCE.

关键词： binary organic solar cell chlorinated end group molecular packing