检索结果-南通市图书馆

Application of fuzzy comprehensive evaluation method to assess effect of conformance control treatments on water-injection wells

引用

Petroleum 2024年第1期10卷 165-174页

作者： Hu Jia Pengwu Li Wei Lv Jianke Ren Chen Cheng Rui Zhang Zhengjun Zhou Yanbin Liang State Key Laboratory of oil and gas Reservoir Geology and Exploitation Southwest Petroleum University oil and gas technology Research institute PetroChina Changqing Oilfield Company oil Production technology institute of PetroChina Dagang oilfield Company

As an effective method to prolong the life of mature field, conformance control in water-injection well has been used wildly. Naturally, effect evaluation of conformance control has attracted great attention because it is an important guideline for the design of later enhanced oil recovery(EOR) plan. Usually,production responses such as excessive water reduction and oil production increment are widely used as the indicators. However, production responses may be unreliable due to the difficulty in determining an effective injection well which is caused by a large number of treated water-injection wells in a well group. Therefore, with the application of fuzzy comprehension evaluation(FCE), five evaluation indexes(injection pressure, injectivity index, slope of hall curve, variation coefficient and homogenization coefficient of injection profile) describe injection responses were selected to establish a new evaluation method in this paper. Based on fuzzy mathematics, FCE reflects the difference of evaluation ***, weights of evaluation indexes were obtained by analytic hierarchy process(AHP), which made the results more convincing. Taking Bai 239 oilfield as an example, the five injection responses indexes were used to assess treatment effect on five water-injection wells by single index evaluation and FCE. The results showed that among the five evaluation indexes mentioned above, the slope of hall curve was the most important factor affected evaluation result. In single index evaluation, opposite results may be produced easily on account of the one-sidedness of single index or human error. Furthermore, we found that effective treatment was a relative concept actually. The result of FCE was consistent with single index evaluation but FCE was more acceptable. This study suggests that FCE could be applied to another field such as water flooding, acidizing and hydraulic fracturing

关键词： Enhanced oil recovery Injection responses Fuzzy mathematics Analytic hierarchy process Effect evaluation

来源：

同方期刊数据库评论

在线全文

同方期刊数据库

学校读者我要写书评

暂无评论

The behaviors of gas-liquid two-phase flow under gas kick during horizontal drilling with oil-based muds

引用

Petroleum 2024年第1期10卷 49-67页

作者： Yu Su Huiyun Ma Jianhua Guo Xinyu Shen Zhaoliang Yang Jie Wu Engineering technology Research institute PetroChina Southwest Oil & Gas Field Company

Natural gas is easily soluble in oil-based muds(OBM), leading to complex flow behavior in wellbores,especially in horizontal wells. In this study, a new transient flow model considering wellbore-formation coupling and gas solubility on flow behavior is developed to simulate gas kicks during horizontal drilling with OBM. Furthermore, the effect of gas solubility on parameters such as bottom-hole pressure(BHP),gas void fraction and mixture velocity in the flow behavior is analyzed. Finally, several critical factors affecting flow behavior are investigated and compared to gas kicks in water-based muds(WBM) where the effect of solubility is neglected. The results show that the invading gas exists as dissolved gas in the OBM and as free gas in the WBM. Before the gas escapes from the OBM, the pit gain is zero and there is barely any change in the BHP, annulus return flow rate and mixture velocity, which means that detecting gas kicks through these warning signs can be challenging until they get very close to the surface and develop rapidly. However, in WBM drilling, these parameters change quickly with the increasing gas kick time. Additionally, for both cases, the longer the horizontal length and the greater reservoir permeability,the greater the decrease in BHP, and the shorter the time for gas to migrate from the bottom-hole to the wellhead. A larger flow rate contributes to a greater initial BHP and a lesser BHP reduction. This research is of value in characterizing gas kick behavior and identifying novel ways for early gas kick detection during horizontal drilling with OBM.

关键词： Flow behavior gas solubility gas kick Horizontal drilling oil-based muds Water-based muds

来源：

同方期刊数据库评论

在线全文

同方期刊数据库

学校读者我要写书评

暂无评论

Application status and research progress of CO2 fracturing fluid in petroleum engineering: A brief review

引用

Petroleum 2024年第1期10卷 1-10页

作者： Jinzhou Zhao Tong Wu Wanfen Pu Du Daijun Qingyuan Chen Bowen Chen Jintao Li Yitao Huang State Key Laboratory of oil and gas Reservoir Geology and Exploitation Southwest Petroleum University Shale gas Research institute of PetroChina Southwest oil & gas Field Company

This paper comprehensively reviews the application and research progress of CO2fracturing fluids in China, highlights the existing issues and puts forward suggestions for future development. Three types of fracturing fluid systems containing CO2, namely, CO2dry fracturing fluid, CO2energized fracturing fluid,and CO2foam fracturing fluid, are categorized based on the mass ratio and process difference between CO2, water, and treatment agents. Field applications in China reveal several problem to be resolved:（1）The application scope of CO2fracturing fluids is restricted to depleted reservoirs, re-fracturing of old wells, and medium-deep reservoirs with low formation pressure coefficients;（2） different types of CO2fracturing fluids require different processes and ground supporting equipment;（3） optimization of CO2compatibility, functionality, temperature and salt tolerance, as well as the cost of treatment agents is necessitated;（4） existing CO2fracturing fluid system fail to perform well with low friction, low filtration,and high sand-carrying capacity.（5） there lacks a targeted industry standard for evaluation of performance of CO2fracturing fluid system and treatment agents. Therefore, in order to meet the goals of CCUS-EOR, CCUS-EGR, or integration of fracturing, displacement and burial by CO2, efforts should be made in the aspects that followed, including in-depth investigation of the mechanism of CO2fracturing fluids, the adaptability and compatibility between existing equipment, different CO2fracturing fluid systems and processes, and construction of treatment agents, low-density proppants and highperformance systems of recyclability and industrial-grade. In addition, optimization of CO2fracturing fluid system based fracturing design is also crucial taking such related factors such as overall reservoir geological conditions, petrophysical properties, CO2transportation, and well site layout into consideration.

关键词： Reservoir reconstruction CO 2 fracturing fluid Fracturing fluid system Fracturing displacement burial integration

来源：

同方期刊数据库评论

在线全文

同方期刊数据库

学校读者我要写书评

暂无评论

A new mixed type crack propagation criterion in shale reservoirs

引用

Petroleum 2024年第1期10卷 85-92页

作者： Muru Ding Zhirong Jin Yanjun Zhang Jinghong Hu Beijing Key Laboratory of Unconventional Natural gas Geology Evaluation and Development Engineering China University of Geosciences Sinopec Jiangsu oil Field Branch oil & gas technology Research institute Changqing Oilefiled CompanyPetroChina

Hydraulic fracturing is a mainstream technology for unconventional oil and gas reservoirs development all over the world. How to use this technology to achieve high-level oil and gas resource extraction and how to form complex fracture networks as hydrocarbon transportation channels in tight reservoirs, which depends to a large extent on the interaction between hydraulic and pre-existing cracks. For hydraulic fracturing of fractured reservoirs, the impact of natural fractures, perforation direction, stress disturbances, faults and other influencing factors will produce a mixed I&II mode hydraulic fracture. To forecast whether hydraulic fractures cross pre-existing fractures, according to elastic mechanics and fracture mechanics, a stress state of cracks under the combination of tensile(I) and shear(II) is presented. A simple mixed-mode I&II hydraulic fracture's crossing judgment criterion is established, and the propagation of hydraulic fractures after encountering natural fractures is analyzed. The results show that for a given approaching angle there exists a certain range of stress ratio when crossing occurs. Under high approaching angle and large stress ratio, it is likely that hydraulic cracks will go directly through pre-existing cracks. The reinitiated angle is always controlled within the range of approximately 30°among the main direction of penetration.

关键词： Crack propagation criterion Stress ratio Approaching angle Reinitiated angle Mechanical model

来源：

同方期刊数据库评论

在线全文

同方期刊数据库

学校读者我要写书评

暂无评论

An optimal flow rate allocation model of the oilfield treated oil pipeline network

引用

Petroleum 2024年第1期10卷 93-100页

作者： Hai Li Tianyou Fan Kun Wang Xueyuan Long Yu He Meng Wang Wen Cheng Qian Huang Huirong Huang Weichao Yu PetroChina Southwest oil & gasfield Company China Petroleum Planning & Engineering institute School of Petroleum Engineering Chongqing University of Science and Technology PipeChina oil & gas Control Center

oilfield treated oil pipeline network is the link connecting the upstream oilfields and the downstream refineries. Due to the differences in operating costs and transportation fee between different pipelines and the fluctuation in the demand and sales prices of the treated oil, there is an optimal flow allocation plan for the pipeline network to make the oilfield company obtain the highest social and economic benefit. In this study, a mixed integer nonlinear programming(MINLP) model is developed to determine the optimal flow rate allocation plan of the large-scale and complex treated oil pipeline network, and both the social and economic benefits are considered simultaneously. The optimization objective is the multi-objective which includes the largest user satisfaction and the highest economic benefit. The model constraints include the oilfield production capacity, refinery demand, pipeline transmission capacity,flow, pressure, and temperature of the node and station, and the pipeline hydraulic and thermal calculations. Python 3.7 is utilized for the programming of the off-line calculation procedure and the MINLP model, and GUROBI 9.0.2 is served as the MINLP solver. Moreover, the model is applied to a real treated oil pipeline network located in China, and three optimization scenarios are analyzed. For social benefit,the values of the user satisfaction of each refinery and the total network are 1 before and after optimization for scenarios 1, 2, and 3. For economic benefit, the annual revenue can be increased by 0.227,0.293, and 0.548 billion yuan after the optimization in scenario 1, 2, and 3, respectively.

关键词： Treated oil pipeline network Flow rate allocation Optimal User satisfaction Economic benefit

来源：

同方期刊数据库评论

在线全文

同方期刊数据库

学校读者我要写书评

暂无评论

Experimental study on wax deposition of highly paraffinic oil in intermittent gas-oil flow in pipelines

引用

Petroleum Science 2024年第3期21卷 2080-2088页

作者： Chuan-Shuo Wang Qian-Li Ma Xiao-Fang Lv Jie Zhang Yang Liu Shi-Dong Zhou Jiangsu Key Laboratory of oil and gas Storage and Transportation technology Changzhou UniversityChangzhou213164JiangsuPR China Hade oil and gas Development Department Tarim Oilfield BranchKorla841000XinjiangPR China

oil-gas two phase wax deposition is a fairly common and open-ended question in flow assurance of multiphase transportation *** paper investigated the two main aspects of oil-gas two phase wax deposition layer:apparent thickness and crystal structure characteristics.A typical highly paraffinic oil in Bohai Sea,China,was used as the experimental material to investigate the wax deposition thickness in oil-gas two phase under the influence of different oil temperatures,superficial gas/liquid phase velocities and gas-oil ratios by using multiphase flow loop experimental *** as in the classical theory of wax molecular diffusion,it showed that wax deposition thickness of oil-gas two phase increased with increasing oil *** of the impact of different superficial phase velocities found that the actual liquid flow heat transfer and shear stripping was the gas phase dominant mechanisms determining wax deposit *** addition,the crystal structure of the wax deposition layer was characterized with the help of small-angle X-ray scattering(SAXS)for different circumferential positions,flow rates and gas-oil *** bottom deposition layer had a complex crystal structure and high hardness,which were subject to change over flow rate ***,the SAXS results provided evidence that the indirect effect of the actual liquid velocity modified by the gas phase was the main *** study of the effect of gas phase on the wax deposition of oil-gas two phase will help shed light onto the mechanism by which this important process *** findings address a very urgent need in the field of wax deposition of highly paraffinic oil to understand the flow security of oilgas two phase that occurs easily in multiphase field pipelines.

关键词： oil-gas two phase Highly paraffinic oil Wax deposition SAXS

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Evaluation of Well Spacing for Primary Development of Fractured Horizontal Wells in Tight Sandstone gas Reservoirs

引用

Fluid Dynamics & Materials Processing 2024年第5期20卷 1015-1030页

作者： Fang Li Juan Wu Haiyong Yi Lihong Wu Lingyun Du Yuan Zeng Exploration and Development Research institute PetroChina Southwest Oil&Gas Field CompanyChengdu610041China oil and gas Resources Department PetroChina Southwest Oil&Gas Field CompanyChengdu610000China

Methods for horizontal well spacing calculation in tight gas reservoirs are still adversely affected by the complexity of related control factors,such as strong reservoir heterogeneity and seepage *** this study,the stress sensitivity and threshold pressure gradient of various types of reservoirs are quantitatively evaluated through reservoir seepage *** the basis of these experiments,a numerical simulation model(based on the special seepage mechanism)and an inverse dynamic reserve algorithm(with different equivalent drainage areas)were *** well spacing ranges of Classes I,II,and III wells in the Q gas field are determined to be 802–1,000,600–662,and 285–400 m,respectively,with their average ranges as 901,631,and 342.5 m,*** considering both the pairs of parallel well groups and series well groups as examples,the reliability of the calculation results is *** is shown that the combination of the two models can reduce errors and provide accurate results.

关键词： Well spacing for primary development tight gas reservoir fractured horizontal well threshold pressure gradient stress sensitivity

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Development review and the prospect of oil shale in-situ catalysis conversion technology

引用

Petroleum Science 2024年第2期21卷 1385-1395页

作者： Li Wang Chen-Hao Gao Rui-Ying Xiong Xiao-Jun Zhang Ji-Xiang Guo The Unconventional oil and gas institute China University of Petroleum-BeijingBeijing102200China

As an unconventional resource, oil shale possesses abundant reserves and significant potential for industrial applications. The rational and efficient development of oil shale resources holds immense importance in reducing national energy demand. In-situ catalytic technology, characterized by its high efficiency, low pollution, and minimal energy consumption, represents a key direction for future oil shale development. This paper provides a comprehensive review of research progress in in-situ oil shale mining technology, oil shale pyrolysis catalysts, the pyrolysis mechanism of kerogen, and the compatibility of different heating processes and catalysts. Furthermore, the paper proposes future research directions and prospects for oil shale in-situ catalytic technology, including reservoir modification, highefficiency catalyst synthesis, injection processes, and high-efficiency heating technology. These insights serve as valuable technical references for the advancement of oil shale in-situ catalytic technology.

关键词： oil shale In-situ catalytic technology Pyrolysis catalyst Kerogen pyrolysis mechanism

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Research on the solid particle erosion wear of pipe steel for hydraulic fracturing based on experiments and numerical simulations

引用

Petroleum Science 2024年第4期21卷 2779-2792页

作者： Si-Qi Yang Jian-Chun Fan Ming-Tao Liu De-Ning Li Jun-Liang Li Li-Hong Han Jian-Jun Wang Shang-Yu Yang Si-Wei Dai Lai-Bin Zhang State Key Laboratory of oil and gas Equipment CNPC Tubular Goods Research Institute Key Laboratory of oil and gas Safety and Emergency technology China University of Petroleum oil Production technology Research institute of Liaohe oilfield Company Tianjin gas Storage Branch PetroChina Dagang Oilfield Company Petroleum Production Engineering Research institute Daqing Oilfield Company

Erosion wear is a common failure mode in the oil and gas industry. In the hydraulic fracturing, the fracturing pipes are not only in high-pressure working environment, but also suffer from the impact of the high-speed solid particles in the fracturing fluid. Beneath such complex conditions, the vulnerable components of the pipe system are prone to perforation or even burst accidents, which has become one of the most serious risks at the fracturing site. Unfortunately, it is not yet fully understood the erosion mechanism of pipe steel for hydraulic fracturing. Therefore, this article provides a detailed analysis of the erosion behavior of fracturing pipes under complex working conditions based on experiments and numerical simulations. Firstly, we conducted erosion experiments on AISI 4135 steel for fracturing pipes to investigate the erosion characteristics of the material. The effects of impact angle, flow velocity and applied stress on erosion wear were comprehensively considered. Then a particle impact dynamic model of erosion wear was developed based on the experimental parameters, and the evolution process of particle erosion under different impact angles, impact velocities and applied stress was analyzed. By combining the erosion characteristics, the micro-structure of the eroded area, and the micro-mechanics of erosion damage, the erosion mechanism of pipe steel under fracturing conditions was studied in detail for the first time. Under high-pressure operating conditions, it was demonstrated through experiments and numerical simulations that the size of the micro-defects in the eroded area increased as the applied stress increased, resulting in more severe erosion wear of fracturing pipes.

关键词： Erosion wear Applied stress Particle impact dynamics Erosion mechanism

来源：

同方期刊数据库评论

在线全文

同方期刊数据库

学校读者我要写书评

暂无评论

Optimization of gas-Flooding Fracturing Development in Ultra-Low Permeability Reservoirs

引用

Fluid Dynamics & Materials Processing 2024年第3期20卷 595-607页

作者： Lifeng Liu Menghe Shi Jianhui Wang Wendong Wang Yuliang Su Xinyu Zhuang Tight oil Research institute PetroChina Research Institute of Petroleum Exploration&DevelopmentBeijing100083China Key Laboratory of Unconventional oil&gas Development China University of Petroleum(East China)Qingdao266580China oil&gas technology Research institute Changqing Oilfield CompanyXi’an710018China

Ultra-low permeability reservoirs are characterized by small pore throats and poor physical properties, which areat the root of well-known problems related to injection and production. In this study, a gas injection floodingapproach is analyzed in the framework of numerical simulations. In particular, the sequence and timing of fracturechanneling and the related impact on production are considered for horizontal wells with different fracturemorphologies. Useful data and information are provided about the regulation of gas channeling and possible strategiesto delay gas channeling and optimize the gas injection volume and fracture parameters. It is shown that inorder to mitigate gas channeling and ensure high production, fracture length on the sides can be controlled andlonger fractures can be created in the middle by which full gas flooding is obtained at the fracture location in themiddle of the horizontal well. A Differential Evolution (DE) algorithm is provided by which the gas injectionvolume and the fracture parameters of gas injection flooding can be optimized. It is shown that an improvedoil recovery factor as high as 6% can be obtained.

关键词： Ultra-low permeability reservoir gas injection flooding component simulation fracture parameters intelligent optimization differential evolution

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

欢迎您,

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

请选择保存的检索档案：

请选择收藏分类：

通借通还

欢迎您,

建议与咨询 留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

请选择保存的检索档案： 新增检索档案 确定 取消

请选择收藏分类： 新增自定义分类 确定 取消

通借通还

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

请选择保存的检索档案：

请选择收藏分类：