检索结果-南通市图书馆

Journal of Environmental sciences 2024年第3期137卷 432-442页

作者： Ze Wang Zhi Huang Jiang Yu Xiao Shao Weidong Peng Jie Yu Yinying Jiang Department of Environmental science and Engineering College of Architecture and EnvironmentSichuan UniversityChengdu 610065China institute of New Energy and Low Carbon technology Sichuan UniversityChengdu 610065China School of Agriculture and Environment University of Western AustraliaPerth 6907Western AustraliaAustralia Yibin institute of Industrial technology Sichuan UniversityYibin 644000China

Formaldehyde is a pollutant that significantly affects the indoor air ***,conventional remediation approaches can be challenging to deal with low-concentration formaldehyde in an indoor *** this study,Photocatalysts of Ag/graphitic carbon nitride(g-C_(3)N_(4))/Ni with 3D reticulated coral structure were prepared by thermal polymerization and liquid phase photo-deposition,using nickel foam(NF)as the *** demonstrated that when the Ag concentration was 3%,and the relative humidity was 60%,the Ni/Ag/g-C_(3)N_(4)showed the maximum degradation rate of formaldehyde at 90.19%under visible light irradiation,and the formaldehyde concentration after degradation was lower than the Hygienic standard stated by the Chinese *** porous structure of Ni/Ag/g-C_(3)N_(4)and the formation of Schottky junctions promoted the Adsorption efficiency and degradation of formaldehyde,while the nickel foam carrier effectively promoted the desorption of degradation ***,the degradation rate was only reduced by3.4%after 16 recycles,the three-dimensional porous structure extended the lifetime of the *** study provides a new strategy for the degradation of indoor formaldehyde at low concentrations.

关键词： Graphitic carbon nitride(g-C_(3)N_(4)) Nickel foam(NF) Ag Formaldehyde Photocatalysis

Friction reactions induced by selective hydrogenation of textured surface under lubricant conditions

在线全文

学校读者我要写书评

暂无评论

Friction 2024年第1期12卷 174-184页

作者： Naizhou DU Xubing WEI Xiaowei LI Zan CHEN Shiqi LU Jiaqing DING Cunao FENG Kai CHEN Jianghao QIAO Dekun ZHANG Kwang-Ryeol LEE Tiancai ZHANG School of materials science and Physics China University of Mining and TechnologyXuzhou 221116China Key Laboratory of Marine materials and Related Technologies Zhejiang Key Laboratory of Marine Materials and Protective TechnologiesNingbo Institute of Materials Technology&EngineeringChinese Academy of SciencesNingbo 315201China Computational science Center Korea Institute of Science and TechnologySeoul 136-791Republic of Korea technology Development Department Shipbuilding Technology Research InstituteShanghai 200032China

The passivation of hydrogen atoms and the conformation of textured surfaces under oil-lubricated conditions are effective strategies to obtain amorphous carbon(a-C)films with extremely low *** is critical to understanding the influence mechanism of selective surface hydrogenation on the tribological behaviors of textured a-C film under oil-lubricated *** particular,the interactions of hydrogen atoms and lubricants are confusing,which is enslaved to the in situ characterization *** reactive molecular dynamics(RMD)simulations were conducted to analyze the friction response of textured a-C films with selective hydrogenation surfaces under oil-lubricated *** results indicate that the existence of hydrogen atoms on specific bump sites significantly decreases the friction coefficient(μ)of textured a-C film,which is highly dependent on the surface hydrogen *** repulsion between hydrogen atoms and lubricant molecules prompts the formation of a dense lubricant film on the surface of the mating ***,with the enhancement of the surface hydrogen content,the passivation of the friction interface and the repulsion between hydrogen atoms and lubricants play dominant roles in reducing the friction coefficient instead of hydrodynamic lubrication.

关键词： textured amorphous carbon(a-C) selective hydrogenation oil lubrication friction mechanism reactive molecular dynamics(RMD)

The enhanced mechanical properties of SiC nanowires/Ba0.75Sr0.25Al2Si2O8 ceramics with embedded SiO2 interface

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Journal of Advanced Ceramics 2024年第7期13卷 933-941页

作者： Xin Li Xiaomeng Fan Haojie Luo Xiaoke Lu Jimei Xue Fang Ye Yongsheng Liu science and technology on Thermostructural Composite materials Laboratory Northwestern Polytechnical UniversityXi’an 710072China Frontier institute of science and technology Xi’an Jiaotong UniversityXi’an 710049China

In this work,low-softening-temperature and low-modulus SiO2 was introduced as an embedded interface between SiC nanowires(SiCnws)and a BaxSr1−xAl2Si2O8 ceramic matrix to enhance strength and toughness of the *** the sintering process,molten SiO2 enhances the flowability of the ceramic powders and modifies the dispersion of *** strengthening effect of SiCnws was fully realized,and the flexural strength of the optimized ceramics reached 193±16 MPa,which represents an increase of 52.6%.After the formation of the embedded SiO2 interface with a low modulus,cracks can deflect along the SiCnws surface,which is consistent with the criterion of He and *** can effectively extend the crack propagation path,and the fracture toughness(K_(IC))is thus improved by 94.0%,reaching 3.1±0.5 MPa·m^(1/2).

关键词： multiphase ceramics SiO2 interface densification mechanical properties

Shock-induced energy localization and reaction growth considering chemical-inclusions effects for crystalline explosives

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Defence technology（防务技术） 2024年第3期33卷 278-294页

作者： Ruqin Liu Yanqing Wu Xinjie Wang Fenglei Huang Xiaona Huang Yushi Wen State Key Laboratory of Explosion science and technology Beijing Institute of TechnologyBeijing100081China School of Power and Mechanical Engineering Wuhan UniversityWuhan430072HubeiChina institute of Chemical materials China Academy of Engineering Physics(CAEP)Mianyang621999SichuanChina

Chemical inclusions significantly alter shock responses of crystalline explosives in macroscale gap experiments but their microscale dynamics origin remains *** shock-induced energy localization,overall physical responses,and reactions in a-1,3,5-trinitro-1,3,5-triazinane(a-RDX)crystal entrained various chemical inclusions were investigated by the multi-scale shock technique implemented in the reactive molecular dynamics *** indicated that energy localization and shock reaction were affected by the intrinsic factors within chemical inclusions,i.e.,phase states,chemical compositions,and *** atomic origin of chemical-inclusions effects on energy localization is dependent on the dynamics mechanism of interfacial molecules with free space volume,which includes homogeneous intermolecular compression,interfacial impact and shear,and void collapse and *** introducing various chemical inclusions,the initiation of those dynamics mechanisms triggers diverse decay rates of bulk RDX molecules and hereby impacts on growth speeds of final *** chemical inclusions can reduce the effectiveness of the void during the shock *** the shockwave velocity of 9 km/s,the parent RDX decay rate in RDX entrained amorphous carbon decreases the most and is about one fourth of that in RDX with a vacuum void,and solid HMX and TATB inclusions are more reactive than amorphous carbon but less reactive than dry air or acetone *** lessdense shocking system denotes the greater increases in local temperature and stress,the faster energy liberation,and the earlier final reaction into equilibrium,revealing more pronounced responses to the present intense *** quantitative models associated with the relative system density(RD_(sys))were proposed for indicating energy-localization mechanisms and evaluating initiation safety in the shocked crystalline ***_(sys)is defined by the density ratio of defective RDX to perfec

关键词： Shock responses Energy localization Crystalline explosives Chemical inclusions Reactive molecular dynamics

Chloride ion battery:A new emerged electrochemical system for next-generation energy storage

在线全文

学校读者我要写书评

暂无评论

Journal of Energy Chemistry 2024年第1期88卷 154-168,I0004页

作者： Shulin Chen Lu Wu Yu Liu Peng Zhou Qinyou An Liqiang Mai State Key Laboratory of Advanced technology for materials Synthesis and Processing School of Materials Science and EngineeringWuhan University of TechnologyWuhan 430070HubeiChina State Key Laboratory of Refractories and Metallurgy Institute of Advanced Materials and NanotechnologyWuhan University of Science and TechnologyWuhan 430081HubeiChina

In the scope of developing new electrochemical concepts to build batteries with high energy density,chloride ion batteries(CIBs)have emerged as a candidate for the next generation of novel electrochemical energy storage technologies,which show the potential in matching or even surpassing the current lithium metal batteries in terms of energy density,dendrite-free safety,and elimination of the dependence on the strained lithium and cobalt ***,the development of CIBs is still at the initial stage with unsatisfactory performance and several challenges have hindered them from reaching *** this review,we examine the current advances of CIBs by considering the electrode material design to the electrolyte,thus outlining the new opportunities of aqueous CIBs especially combined with desalination,chloride redox battery,*** respect to the developing road of lithium ion and fluoride ion batteries,the possibility of using solid-state chloride ion conductors to replace liquid electrolytes is tentatively *** beyond,perspectives and clear suggestions are concluded by highlighting the major obstacles and by prescribing specific research topics to inspire more efforts for CIBs in large-scale energy storage applications.

关键词： Chloride ion battery Anion shuttling Conversion reaction Chloride redox

Phase transition of multi-component(TiZrVNb)C ceramics—Part I:Phase decomposition induced by carbon content

在线全文

学校读者我要写书评

暂无评论

Journal of Advanced Ceramics 2024年第5期13卷 679-688页

作者： Qingyi Kong Rao Zhang Lei Chen Sijia Huo Wenyu Lu Yujin Wang Boxin Wei Yu Zhou institute for Advanced Ceramics School of Materials Science and EngineeringHarbin Institute of TechnologyHarbin 150080China Key Laboratory of Advanced Structure‒Function Integrated materials and Green Manufacturing technology Harbin Institute of TechnologyHarbin 150001China School of materials science and Chemical Engineering Harbin University of Science and TechnologyHarbin 150001China National Key Laboratory of Precision Hot Processing of Metals Harbin Institute of TechnologyHarbin 150001China

Phase decomposition can effectively enhance the mechanical properties of carbide ceramics and can overcome the difficulty of enhancing the mechanical properties of single-phase multicomponent carbide *** this work,a series of nonstoichiometric(TiZrVNb)Cx ceramics were prepared by spark plasma sintering(SPS)at different *** effects of the carbon content on the phase composition,microstructure evolution,and mechanical properties were investigated in *** decomposition occurred with decreasing carbon *** different solid solutions of(Ti,V)-rich and Zr-rich phases formed from the decomposition of equimolar single-phase solid solutions,namely,the Zr-poor phase and Zr-rich phase,*** distribution of Nb element is relatively *** semicoherent interfaces between the Zr-poor phase and the Zr-rich phase can harden and strengthen effectively under the synergistic effect of grain *** with phase decomposition structures have apparent advantages compared to single-phase high-entropy *** work provides an important train of thought for the microstructure tailoring and properties optimization of multi-component carbide ceramics.

关键词： multicomponent ceramics nontoichiometry microstructure evolution phase decomposition mechanical properties

Design Strategies for Aqueous Zinc Metal Batteries with High Zinc Utilization: From Metal Anodes to Anode-Free Structures

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Nano-Micro Letters 2024年第4期16卷 305-349页

作者： Xianfu Zhang Long Zhang Xinyuan Jia Wen Song Yongchang Liu School of materials science and Engineering University of Science and Technology Beijing30 College RoadBeijing 100083People’s Republic of China Beijing Advanced Innovation Center for materials Genome Engineering Institute for Advanced Materials and TechnologyState Key Laboratory for Advanced Metals and MaterialsUniversity of Science and Technology BeijingBeijing 100083People’s Republic of China

Aqueous zinc metal batteries(AZMBs)are promising candidates for next-generation energy storage due to the excellent safety, environmental friendliness, natural abundance, high theoretical specific capacity, and low redox potential of zinc(Zn) metal. However,several issues such as dendrite formation, hydrogen evolution, corrosion, and passivation of Zn metal anodes cause irreversible loss of the active materials. To solve these issues, researchers often use large amounts of excess Zn to ensure a continuous supply of active materials for Zn anodes. This leads to the ultralow utilization of Zn anodes and squanders the high energy density of AZMBs. Herein, the design strategies for AZMBs with high Zn utilization are discussed in depth, from utilizing thinner Zn foils to constructing anode-free structures with theoretical Zn utilization of 100%, which provides comprehensive guidelines for further research. Representative methods for calculating the depth of discharge of Zn anodes with different structures are first summarized. The reasonable modification strategies of Zn foil anodes, current collectors with pre-deposited Zn, and anode-free aqueous Zn metal batteries(AF-AZMBs) to improve Zn utilization are then detailed. In particular, the working mechanism of AF-AZMBs is systematically introduced. Finally, the challenges and perspectives for constructing high-utilization Zn anodes are presented.

关键词： Aqueous zinc metal batteries Zinc anodes High zinc utilization Depth of discharge Anode-free structures

Facile synthesis of accordion-like porous carbon from waste PET bottles-based MIL-53(Al) and its application for high-performance Zn-ion capacitor

在线全文

学校读者我要写书评

暂无评论

Green Energy & Environment 2024年第7期9卷 1138-1150页

作者： Jiaxin Li Shuai Zhang Yumeng Hua Yichao Lin Xin Wen Ewa Mijowska Tao Tang Xuecheng Chen Rodney S.Ruoff Faculty of Chemical technology and Engineering West Pomeranian University of Technology Key State Key Laboratory of Polymer Physics and Chemistry Changchun Institute of Applied Chemistry Chinese Academy of Sciences School of Safety Engineering China University of Mining and Technology institute of Advanced Electrical materials Qingdao University of Science and Technology institute for Basic science Center for Multiple Dimensional Carbon materials Department of Chemistry Ulsan National Institute of Science and Technology (UNIST) Department of materials science and Engineering Ulsan National Institute of Science and Technology (UNIST) School of Energy and Chemical Engineering Ulsan National Institute of Science and Technology (UNIST)

It is of great scientific and economic value to recycle waste poly（ethylene terephthalate）(PET) into high-value PET-based metal organic frameworks（MOFs） and further convert it into porous carbon for green energy storage applications. In the present study, a facile and costeffective hydrothermal process was developed to direct recycle waste PET bottles into MIL-53（Al） with a 100% conversation, then the MOFderived porous carbon was assembled into electrodes for high-performance supercapacitors. The results indicated that the as-synthesized carbon exhibited high SSA of 1712 m2g-1and unique accordion-like structure with hierarchical porosity. Benefit to these advantageous characters, the assembled three-electrode supercapacitor displayed high specific capacitances of 391 F g-1at the current density of 0.5 A g-1and good rate capability of 73.6% capacitance retention at 20 A g-1in 6 mol L-1KOH electrolyte. Furthermore, the assembled zinc ion capacitor still revealed outstanding capacitance of 335 F g-1at 0.1 A g-1, excellent cycling stability of 92.2% capacitance retention after 10 000 cycles and ultra-high energy density of 150.3 Wh kg-1at power density of 90 W kg-1in 3 mol L-1ZnSO4electrolyte. It is believed that the current work provides a facile and effective strategy to recycle PET waste into high-valuable MOF, and further expands the applications of MOF-derived carbons for high-performance energy storage devices, so it is conducive to both pollution alleviation and sustainable economic development.

关键词： PET Recycling Porous carbon Supercapacitor Energy storage

Single-wall carbon nanotube fiber non-woven fabrics with a high electrothermal heating response

在线全文

同方期刊数据库

学校读者我要写书评

暂无评论

Nano Research 2024年第6期17卷 5621-5628页

作者： Xinyu Jiao Lele Xu Xinyang Sun Chao Shi Peng-Xiang Hou Chang Liu Hui-Ming Cheng Shenyang National Laboratory for materials science Institute of Metal ResearchChinese Academy of SciencesShenyang 110016China School of materials science and Engineering University of Science and Technology of ChinaHefei 230026China Faculty of materials science and Engineering/institute of technology for Carbon Neutrality Shenzhen Institute of Advanced TechnologyChinese Academy of SciencesShenzhen 518055China

Carbon nanotube(CNT)fibers have great promise for constructing multifunctional fabrics with high electrical conductivity,good electro-heating ability,excellent flexibility,and a low ***,the inter-fiber contacts in the fabric greatly reduce these advantages and limit their ***,a simple pressure-fusing method to fabricate single-wall CNT(SWCNT)fiber non-woven fabrics(NWFs)that are composed of interconnected SWCNT fibers with fused joints is reported,which have good flexibility,a low density of 0.46 g/cm^(3),a high electrical conductivity of 3.7×10^(5)S/m,and a record high specific electrical conductivity of 803(S·m^(2))/*** also showed excellent electrical heating ability,so that a temperature of~160℃was rapidly reached at a low voltage of 2 *** with their low density,the SWCNT fiber NWFs are promising for use as a heating unit for low temperature battery protection and de-icing applications.

关键词： carbon nanotube fiber nonwoven fabrics fusing electrothermal heating

Enhanced mechanical property by introducing bimodal grains structures in Cu-Ta alloys fabricated by mechanical alloying

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Journal of materials science & technology 2024年第5期172卷 104-112页

作者： Ningyu Li Yongqin Chang Mingyang Li Yuxiang Chen Xinrui Luo Shichao Pei Fan Yang School of materials science and Engineering University of Science and Technology BeijingBeijing 100083China Xi’an Rare Metal materials institute Co.Ltd Xi’an 710016China

Dispersion-strengthened copper alloys can achieve ultra-high strength,but usually at the expense of *** this study,a strategy for overcoming strength-ductility tradeoffof Cu alloys is realized through the introduction of bimodal grains ***-Ta alloys with only 0.5 at.%Ta content were successfully prepared by mechanical alloying combined with spark plasm *** samples prepared by one-step and two-step ball milling methods are named as Cu-Ta(Ⅰ)and Cu-Ta(Ⅱ),*** microstructural characterizations revealed that ultra-fine equiaxed grains with uniformly dispersed Ta precipitates were obtained in the Cu-Ta *** strength of 377 MPa for yield strength together with elongation of∼8%was obtained in Cu-Ta(Ⅰ).Bimodal grains structures composed of fine-grain zones and coarse-grain zones were successfully introduced into Cu-Ta(Ⅱ)by a two-step ball milling approach,and both yield strength(463 MPa)and elongation(∼15%)were significantly synergistic *** hardness values of both Cu-Ta(Ⅰ)and Cu-Ta(Ⅱ)were almost kept nearly constant with the increase of annealing time,and the softening temperatures of Cu-Ta(Ⅰ)and Cu-Ta(Ⅱ)are 1018 and 1013℃,reaching 93.9%and 93.5%T m of pure Cu(1083℃),*** reveals that the Cu-0.5 at.%Ta alloys exhibit excellent thermal stability and exceptional softening *** nanoclusters with semi-coherent structures play an essential role in enhancing the strength and microstructural stability of *** structures are beneficial to the activation of back stress strengthening and the initiation and propagation of microcracks,thus obtaining the extraordinary combination of strength and *** study provides a new way to fabricate dispersion-strengthened Cu alloys with high strength,high elongation,excellent thermal stability and softening resistance,which have potential application value in the field of the future fusion reactor.

关键词： Cu-Ta alloy Mechanical alloying Ta precipitates Bimodal structures Mechanical property