检索结果-南通市图书馆

Upconversion luminescence and optical thermometry behaviors of Yb^(3+)and Ho^(3+)co‑doped GYTO crystal

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Frontiers of Optoelectronics 2023年第3期16卷 179-189页

作者： Chuancheng Zhang Shoujun Ding Miaomiao Wang Hao Ren Xubing Tang Yong Zou Renqin Dou Wenpeng Liu School of Microelectronics and data science Anhui University of TechnologyMaanshan 243002China Anhui institute of Optics and Fine Mechanics Chinese Academy of SciencesHefei 230031China Advanced Laser Technology Laboratory of Anhui Province Hefei 230037China Anhui Provincial Joint Key Laboratory of Disciplines for Industrial Big data Analysis and Intelligent decision Maanshan 243002China

Optical thermometry based on the upconversion(UC)luminescence intensity ratio(LIR)has attracted considerable attention because of its feasibility for achievement of accurate non-contact temperature *** with traditional UC phosphors,optical thermometry based on UC single crystals can achieve faster response and higher sensitivity due to the stability and high thermal conductivity of the single *** this study,a high-quality 5 at%Yb^(3+)and 1 at%Ho^(3+)co-doped Gd_(0.74)Y_(0.2)TaO_(4)single crystal was grown by the Czochralski(Cz)method,and the structure of the as-grown crystal was ***,the UC luminescent properties and optical thermometry behaviors of this crystal were *** 980 nm wavelength excitation,green and red UC luminescence lines at 550 and 650 nm and corresponding to the^(5)F_(4)/^(5)S_(2)→^(5)I_(8)and^(5)F_(5)→^(5)I_(8)transitions of Ho^(3+),respectively,were *** green and red UC emissions involved a two-photon mechanism,as evidenced by the analysis of power-dependent UC emission *** temperature-dependent UC emission spectra were measured in the temperature range of 330–660 K to assess the optical temperature sensing *** 660 K,the maximum relative sensing sensitivity(S_(r))was determined to be 0.0037 K^(−1).These results highlight the signifcant potential of Yb,Ho:GYTO single crystal for optical temperature sensors.

关键词： Yb,Ho:GYTO Optical temperature sensor Luminescence intensity ratio Upconversion luminescence

Ensemble Classifier Design Based on Perturbation Binary Salp Swarm Algorithm for Classification

在线全文

学校读者我要写书评

暂无评论

Computer Modeling in Engineering & sciences 2023年第4期135卷 653-671页

作者： Xuhui Zhu Pingfan Xia Qizhi He Zhiwei Ni Liping Ni School of Management Hefei University of TechnologyHefei230009China School of Statistics Zhejiang Gongshang UniversityHangzhou310018China Key Laboratory of Process optimization and Intelligent decision-Making Ministry of EducationHefei230009China Collaborative Innovation Center for Statistical data Engineering Technology and Application ZhejiangGongshang UniversityHangzhou310018China

Multiple classifier system exhibits strong classification capacity compared with single classifiers,but they require significant computational *** ensemble system aims to attain equivalent or better classification accuracy with fewer ***,current methods fail to identify precise solutions for constructing an ensemble *** this study,we propose an ensemble classifier design technique based on the perturbation binary salp swarm algorithm(ECDPB).Considering that extreme learning machines(ELMs)have rapid learning rates and good generalization ability,they can serve as the basic classifier for creating multiple candidates while using fewer computational ***,we introduce a combined diversity measure by taking the complementarity and accuracy of ELMs into account;it is used to identify the ELMs that have good diversity and low *** addition,we propose an ECDPB with powerful optimizing ability;it is employed to find the optimal subset of *** selected ELMs can then be used to forman ensemble *** on 10 benchmark datasets have been conducted,and the results demonstrate that the proposed ECDPB delivers superior classification capacity when compared with alternative methods.

关键词： Ensemble classifier salp swarmalgorithm diversity measure multiple classifiers system extreme learning machine

Big data analytics for privacy through ND-homomorphic encryption

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Journal of Control and decision 2023年第1期10卷 64-71页

作者： S.Saravanan N.Poornima Department of CSE SRM Institute of Science and TechnologyChennaiIndia Department of data science and Business Systems School of ComputingSRM Institute of Science and TechnologyKattankulathurIndia

Rapidly rising the quantity of Big data is an opportunity to flout the privacy of people. Whenhigh processing capacity and massive storage are required for Big data, distributed networkshave been used. There are several people involved in these activities, the system may contributeto privacy infringements frameworks have been developed for the preservation of privacy atvarious levels (e.g. information age, information the executives and information preparing) asfor the existing pattern of huge information. We plan to frame this paper as a literature surveyof these classifications, including the Privacy Processes in Big data and the presentation of theAssociate Challenges. Homomorphic encryption is particularised aimed at solitary single actionon the ciphered information. Homomorphic enciphering is restrained to an honest operation onthe encoded data. The reference to encryption project fulfils many accurate trading operationson coded numerical data;therefore, it protects the written in code-sensible information evenmore.

关键词： Security and confidentiality vast statistics data encryption nondeterministic fully homomorphic encryption

Finite-time sliding mode attitude control for a reentry vehicle with blended aerodynamic surfaces and a reaction control system

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Chinese Journal of Aeronautics 2014年第4期27卷 964-976页

作者： Geng Jie Sheng Yongzhi Liu Xiangdong Key Laboratory for Intelligent Control&decision of Complex Systems Beijing Institute of Technology School of Automation Beijing Institute of Technology

This paper proposes a finite-time robust flight controller, targeting for a reentry vehicle with blended aerodynamic surfaces and a reaction control system（RCS）. Firstly, a novel finite-time attitude controller is pointed out with the introduction of a nonsingular finite-time sliding mode manifold. The attitude tracking errors are mathematically proved to converge to zero within finite time which can be estimated. In order to improve the performance, a second-order finite-time sliding mode controller is further developed to effectively alleviate chattering without any deterioration of robustness and accuracy. Moreover, an optimization control allocation algorithm, using linear programming and a pulse-width pulse-frequency（PWPF） modulator, is designed to allocate torque commands for all the aerodynamic surface deflections and on–off switching-states of RCS *** are provided for the reentry vehicle considering uncertain parameters and external disturbances for practical purposes, and the results demonstrate the effectiveness and robustness of the attitude control system.

关键词： Chattering alleviation Control allocation Finite-time convergence Flight control systems Second-order sliding mode Singularity elimination Sliding mode control

Visualization and simulation of steel metallurgy processes

在线全文

学校读者我要写书评

暂无评论

International Journal of Minerals,Metallurgy and Materials 2021年第8期28卷 1387-1396页

作者： Te Xu Guang Song Yang Yang Pei-xin Ge Li-xin Tang Key Laboratory of data Analytics and optimization for Smart Industry(Northeastern University) Ministry of EducationShenyang 110819China Liaoning Engineering Laboratory of Operations Analytics and optimization for Smart Industry Northeastern UniversityShenyang 110819China Liaoning Key Laboratory of Manufacturing System and Logistics Shenyang 110819China institute of Industrial&Systems Engineering Northeastern UniversityShenyang 110819China

Steel production involves the transfer and transformation of material and energy at different levels, structures, and scales, and this process incurs substantial information in the material and energy dimensions. Given the black-box feature of iron and steel production processes, process visualization plays an important role and inevitably benefits parameter correction, technical support decision-making, personnel training, and other aspects of the steel metallurgy industry. The technological characteristics of the entire process in the steel industry were analyzed in this study, a visualization technology route based on virtual reality(VR) was built, and the important components of visual simulation system for steel industry and the important technical points needed to realize the system were proposed. On the foundation, a visual simulation model for the process scheduling of the iron and steel enterprise raw materials' field, slab, and hot rolling processes was built, and a visualization simulation platform of the iron and steel metallurgy plant-wide process, including ironmaking, steelmaking, hot rolling, and cold rolling, was developed. Lastly, the effectiveness of platform was illustrated by practical application.

关键词： virtual reality steel metallurgy plant-wide visualization

Human Stress Recognition by Correlating Vision and EEG data

在线全文

学校读者我要写书评

暂无评论

Computer Systems science & Engineering 2023年第6期45卷 2417-2433页

作者： S.Praveenkumar T.Karthick SRM institute of science and Technology Department of Data Science and Business SystemsSchool of ComputingKattankulathur603203TamilnaduIndia

Because stress has such a powerful impact on human health,we must be able to identify it automatically in our everyday *** human activity recognition(HAR)system use data from several kinds of sensors to try to recognize and evaluate human actions automatically recognize and evaluate human *** the multimodal dataset DEAP(database for Emotion Analysis using Physiological Signals),this paper presents deep learning(DL)technique for effectively detecting human *** combination of vision-based and sensor-based approaches for recognizing human stress will help us achieve the increased efficiency of current stress recognition systems and predict probable actions in advance of when *** on visual and EEG(Electroencephalogram)data,this research aims to enhance the performance and extract the dominating characteristics of stress *** the stress identification test,we utilized the DEAP dataset,which included video and EEG *** also demonstrate that combining video and EEG characteristics may increase overall performance,with the suggested stochastic features providing the most accurate *** the first step,CNN(Convolutional Neural Network)extracts feature vectors from video frames and EEG *** Level(FL)fusion that combines the features extracted from video and EEG *** use XGBoost as our classifier model to predict stress,and we put it into *** stress recognition accuracy of the proposed method is compared to existing methods of decision Tree(DT),Random Forest(RF),AdaBoost,Linear Discriminant Analysis(LDA),and KNearest Neighborhood(KNN).When we compared our technique to existing state-of-the-art approaches,we found that the suggested DL methodology combining multimodal and heterogeneous inputs may improve stress identification.

关键词： Mental stress physiological data XGBoost feature fusion DEAP video data EEG CNN HAR

Enhanced thermoelectric performance of n-type TiCoSb halfHeusler by Ta doping and Hf alloying

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Rare Metals 2021年第1期40卷 40-47页

作者： Rui-Fang Wang Shan Li Wen-Hua Xue Chen Chen Yu-Mei Wang Xing-Jun Liu Qian Zhang School of Materials science and Engineering Institute of Materials Genome and Big DataHarbin Institute of TechnologyShenzhen 518055China Beijing National Laboratory for Condensed Matter Physics Institute of PhysicsChinese Academy of ScienceBeijing 100190China

The p-type TiCoSb-based half-Heuslers are widely studied due to the good electrical transport properties after hole doping,while the pristine TiCoSb is intrinsically *** is thus desired to obtain a comparable n-type counterpart through optimization of electron *** this work,n-type Ti_(0.9-x)HfxTa_(0.1)CoSb half-Heuslers were fabricated by arc melting,ball milling,and spark plasma *** optimized carrier concentration,together with a decreased lattice thermal conductivity,was obtained by Ta doping at the Ti site,leading to a peak figure of merit(ZT)of 0.7 at 973 K in Ti_(0.9)Ta_(0.1)-*** further alloying Hf at the Ti site,the lattice thermal conductivity was significantly reduced without deteriorating the power *** a result,a peak ZT of 0.9 at 973 K and an average ZT of 0.54 in the temperature range of 300-973 K were achieved in Ti_(0.6)Hf_(0.3)Ti_(0.1)*** work demonstrates that n-type TiCoSb-based halfHeuslers are promising thermoelectric materials.

关键词： Thermoelectric Half-Heusler N-type TiCoSb

Interactive multiobjective evolutionary algorithm based on decomposition and compression

在线全文

学校读者我要写书评

暂无评论

science China(Information sciences) 2021年第10期64卷 166-181页

作者： Lu CHEN Bin XIN Jie CHEN School of Automation Beijing Institute of Technology State Key Laboratory of Intelligent Control and decision of Complex Systems

Many real-world optimization problems involve multiple conflicting objectives. Such problems are called multiobjective optimization problems(MOPs). Typically, MOPs have a set of so-called Pareto optimal solutions rather than one unique optimal solution. To assist the decision maker(DM) in finding his/her most preferred solution, we propose an interactive multiobjective evolutionary algorithm(MOEA)called iDMOEA-εC, which utilizes the DM’s preferences to compress the objective space directly and progressively for identifying the DM’s preferred region. The proposed algorithm employs a state-of-the-art decomposition-based MOEA called DMOEA-εC as the search engine to search for solutions. DMOEA-εC decomposes an MOP into a series of scalar constrained subproblems using a set of evenly distributed upper bound vectors to approximate the entire Pareto front. To guide the population toward only the DM’s preferred part on the Pareto front, an adaptive adjustment mechanism of the upper bound vectors and two-level feasibility rules are proposed and integrated into DMOEA-εC to control the spread of the population. To ease the DM’s burden, only a small set of representative solutions is presented in each interaction to the DM,who is expected to specify a preferred one from the set. Furthermore, the proposed algorithm includes a two-stage selection procedure, allowing to elicit the DM’s preferences as accurately as possible. To evaluate the performance of the proposed algorithm, it was compared with other interactive MOEAs in a series of experiments. The experimental results demonstrated the superiority of iDMOEA-εC over its competitors.

关键词： multiobjective optimization interactive decision making preference incorporation decomposition compression

Heuristic algorithms for scheduling on uniform parallel machines with heads and tails

在线全文

同方期刊数据库

学校读者我要写书评

暂无评论

Journal of Systems Engineering and Electronics 2011年第3期22卷 462-467页

作者： Kai Li Shanlin Yang School of Management Hefei University of TechnologyHefei 230009P.R.China Key Laboratory of Process optimization and Intelligent decision-making Ministry of EducationHefei University of TechnologyHefei 230009P.R.China

This paper considers the uniform parallel machine scheduling problem with unequal release dates and delivery times to minimize the maximum completion *** this NP-hard problem,the largest sum of release date,processing time and delivery time first rule is designed to determine a certain machine for each job,and the largest difference between delivery time and release date first rule is designed to sequence the jobs scheduled on the same machine,and then a novel algorithm for the scheduling problem is *** evaluate the performance of the proposed algorithm,a lower bound for the problem is *** accuracy of the proposed algorithm is tested based on the data with problem size varying from 200 jobs to 600 *** computational results indicate that the average relative error between the proposed algorithm and the lower bound is only 0.667%,therefore the solutions obtained by the proposed algorithm are very accurate.

关键词： scheduling parallel machine uniform release date/head delivery time/tail.