检索结果-南通市图书馆

Application of surfactant for improving leaching process of weathered crust elution-deposited rare earth ores

Journal of Rare Earths 2024年第1期42卷 181-190,I0007页

作者： Fang Zhou Lisen Zhang Zhiwei Wang Yixin Zhang Ru'an Chi Xiaoyan Wu Key Laboratory for Green chemical process of Ministry of Education Wuhan Institute of TechnologyWuhan430073China

Weathered crust elution-deposited rare earth ores(WREOs)in China are the main source of medium and heavy rare earths in the *** order to improve the seepage and the mass transfer of traditional ammonium salt leaching process of WREOs,surfactants were added in the ammonium sulfate leaching solution and the ammonium chloride leaching *** leaching kinetics,the mass transfer process,and the adhesion work reduction factor calculated from the interfacial properties were studied to reveal the strengthening mechanism of *** the presence of the tested five surfactants,cetyl trimethyl ammonium bromide(CTAB),dodecyl trimethyl ammonium bromide(DTAB),sodium dodecyl sulfate(SDS),sodium oleate and oleic acid,the permeability of WREOs is improved,the rare earth(RE)leaching efficiency increase and the impurity aluminum(Al)leaching efficiency decrease,indicating its promotional effect on the leaching process of ***,CTAB shows a better leaching enhancement,and the optimal addition dosage is 0.4 g/L for the two ammonium salt leaching agent *** kinetics analysis shows the internal diffusion controls model of RE and Al leaching process,and the leaching kinetics equations of RE and Al related to CTAB concentration were obtained for the two ammonium salt leaching *** to the chromatographic plate theory,the mass transfer efficiency of RE increases with the CTAB concentration increasing until 0.4 g/L,which confirms that the optimal CTAB addition is 0.4 g/*** adhesion work and adhesion work reduction factor indicate more favorable permeation as well as the leaching process.

关键词： Weathered crust elution-deposited rare earth ores Surfactant Kinetics Mass transfer

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

A projected Newton algorithm based on chemically allowed interval for chemical equilibrium computations

引用

Frontiers of chemical Science and Engineering 2024年第3期18卷 25-37页

作者： Hongbin Lu Shaohui Tao Xiaoyan Sun Li Xia Shuguang Xiang institute of process Systems Engineering College of Chemical EngineeringQingdao University of Science and TechnologyQingdao266042China

The chemical equilibrium equations utilized in reactive transport modeling are complex and nonlinear,and are typically solved using the Newton-Raphson *** this algorithm is known for its quadratic convergence near the solution,it is less effective far from the solution,especially for ill-conditioned *** such cases,the algorithm may fail to converge or require excessive *** address these limitations,a projected Newton method is introduced to incorporate the concept of *** method constrains the Newton step by utilizing a chemically allowed interval that generates feasible descending ***,we utilize the positive continuous fraction method as a preconditioning technique,providing reliable initial values for solving the *** numerical results are compared with those derived using the regular Newton-Raphson method,the Newton-Raphson method based on chemically allowed interval updating rules,and the bounded variable least squares method in six different test *** numerical results highlight the robustness and efficacy of the proposed algorithm.

关键词： chemical equilibrium reactive transport modeling numerical methods projected Newton method

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Phase equilibrium data prediction and process optimizationin butadiene extraction process

引用

Chinese Journal of chemical Engineering 2024年第7期71卷 1-12页

作者： Baowei Niu Yanjie Yi Yuwen Wei Fuzhen Zhang Lili Wang Li Xia Xiaoyan Sun Shuguang Xiang institute of process System Engineering College of Chemical EngineeringQingdao University of Science and TechnologyQingdao 266042China

In response to the lack of reliable physical parameters in the process simulation of the butadiene extraction,a large amount of phase equilibrium data were collected in the context of the actual process of butadiene production by *** accuracy of five prediction methods,UNIFAC(UNIQUAC Functional-group Activity Coefficients),UNIFAC-LL,UNIFAC-LBY,UNIFAC-DMD and COSMO-RS,applied to the butadiene extraction process was verified using partial phase equilibrium *** results showed that the UNIFAC-DMD method had the highest accuracy in predicting phase equilibrium data for the missing ***-RS-predicted multiple systems showed good accuracy,and a large number of missing phase equilibrium data were estimated using the UNIFAC-DMD method and COSMO-RS *** predicted phase equilibrium data were checked for *** NRTL-RK(non-Random Two Liquid-Redlich-Kwong Equation of State)and UNIQUAC thermodynamic models were used to correlate the phase equilibrium *** device simulations were used to verify the accuracy of the thermodynamic model applied to the butadiene extraction *** simulation results showed that the average deviations of the simulated results using the correlated thermodynamic model from the actual values were less than 2%compared to that using the commercial simulation software,Aspen Plus and its *** average deviation was much smaller than that of the simulations using the Aspen Plus database(>10%),indicating that the obtained phase equilibrium data are highly accurate and *** best phase equilibrium data and thermodynamic model parameters for butadiene extraction are *** improves the accuracy and reliability of the design,optimization and control of the process,and provides a basis and guarantee for developing a more environmentally friendly and economical butadiene extraction process.

关键词： Butadiene extraction Phase equilibrium data Prediction methods Thermodynamic modeling process simulation

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Synthesis of spherical nano-ZSM-5 zeolite with intergranular mesoporous for alkylation of ethylbenzene with ethanol to produce m-diethylbenzene

引用

Chinese Journal of chemical Engineering 2024年第3期67卷 298-309页

作者： Siyue Wang Jinhong Li Qingxin Xu Shengjie Song Yu'ni Jiang Lidong Chen Xin Shi Weiguo Cheng Faculty of Chemistry and chemical Engineering Liaoning Normal UniversityDalian 110629China Beijing Key Laboratory of Ionic Liquids Clean process Key Laboratory of Green Process and EngineeringInstitute of Process EngineeringChinese Academy of SciencesBeijing 100190China

Catalytic synthesis of m-diethylbenzene(m-DEB)through alkylation of ethylbenzene(EB)may be a promising alternative route in comparison with traditional rectification of mixed DEB,for which the top priority is to develop efficient and stable heterogeneous ***,the spherical nano-ZSM-5 zeolite with abundant intergranular mesoporous is synthesized by the seed-mediated growth method for alkylation of EB with ethanol to produce *** results show that the spherical nano-ZSM-5 zeolite exhibits better stability and higher alkylation activity at a lower temperature than those of commercial micropore *** then,the spherical nano-ZSM-5 is further modified by La_(2)O_(3) through acid treatment followed by immersion *** acid treatment causes nano-ZSM-5 to exhibit the increased pore size but decreased the acid sites,and subsequent La_(2)O_(3) loading reintroduces the weak acid *** a result,the HNO_(3)-La_(2)O_(3)-modified catalyst exhibits a slight increase in EB conversion and DEB yield in comparison with unmodified one,and meanwhile,it still maintains high m-DEB *** catalyst after acid treatment achieves higher catalytic stability besides maintaining the high alkylation activity of EB with *** present study on the spherical nano-HZSM-5 zeolite and its modification catalyst with excellent alkylation ability provides new insights into the production of mDEB.

关键词： Zeolite Modification Alkylation reaction m-diethylbenzene Catalyst Fixed-bed

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Insight into the role of ethylene glycol on thermodynamics and nucleation kinetics of dimethyl terephthalate in mixed solvent system

引用

Particuology 2024年第2期85卷 1-12页

作者： Yujin Zhang Chunyan Shi Jing Tang Li Liu Dongxia Yan Qing Zhou Xingmei Lu Songyan Jia College of chemical Engineering Shenyang University of Chemical TechnologyShenyang110142China Bejing Key Laboratoryoflonic Liquids Clean process CAS Key LaboratoryofGreen Process and EngineeringState Key Laboratoryof Multiphase Complex SystemsInstitute of Process EngineeringChinese Academy of SciencesBeijing100190China School of Chemistry and chemical Engineering Qingdao UniversityQingdao266071China Henan institute of Advanced Technology Zhengzhou UniversityZhengzhou450001China School of chemical Engineering University of Chinese Academy of SciencesBeijing100049China

Dissolution and nucleation are two essential processes for industrial *** paper in-vestigates the effect of ethylene glycol addition on the crystallization behavior of dimethyl terephthalate(DMT)in *** DMT solubility in mixed solvent system(methanol-ethylene glycol)was deter-mined by isothermal satiation approach,and the solubility was associated using seven *** model fitting results were consistent with the experimental *** on the results,the metastable zone width(MSZW)of DMT was detected by the polythermal approach;the modified Sangwal's theory was used to investigate the nucleation behavior,which can provide a new way of thought for better analysis of the crystallization *** results demonstrated that MSZW was associated with various elements,such as cooling rate,saturation temperature and mass fraction of ethylene *** addition of ethylene glycol slowed down the nucleation rate as shown by the broadening of *** derive the solid-liquid interface energy,the nucleation driving force,the critical nucleation size and the critical Gibbs free energy according to the classical nucleation *** is demonstrated that the nucleation driving force and the solid-liquid interface energy are dependent and jointly influence the MSZW.

关键词： Dissolution Nucleation Solubility Apparent thermodynamic parameters Metastable zone width Solid-liquid interface energy

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Synthesis of NaY zeolite from a submolten depolymerized perlite:Alkalinity effect and crystallization kinetics

引用

Chinese Journal of chemical Engineering 2024年第6期70卷 130-138页

作者： Yanli Qu Peng Dong Li Yang Yuanyuan Yue Haoliang Wang Jingcai Cheng Chao Yang CAS Key Laboratory of Green process and Engineering State Key Laboratory of Petroleum Molecular&Process EngineeringInstitute of Process EngineeringChinese Academy of SciencesBeijing 100190China School of chemical Engineering University of Chinese Academy of SciencesBeijing 100190China Qingyuan Innovation Laboratory Quanzhou 362801China National Engineering Research Center of chemical Fertilizer Catalyst College of Chemical EngineeringFuzhou UniversityFuzhou 350108China

NaY zeolites are synthesized using submolten salt depolymerized natural perlite mineral as the main silica and alumina sources in a 0.94 L stirred *** of alkalinity ranging from 0.38 to 0.55(n(Na_(2)O)/n(SiO_(2)))on the relative crystallinity,textural properties and crystallization kinetics were *** results show that alkalinity exerts a nonmonotonic influence on the relative crystallinity and textural properties,which exhibit a maximum at the alkalinity of *** nucleation kinetics are studied by fitting the experimental data of relative crystallinity with the Gualtieri *** is shown that the nucleation rate constant increases with increasing alkalinity,while the duration period of nucleation decreases with increasing *** n(Na_(2)O)/n(SiO_(2))ratios ranging from 0.38 to 0.55,the as-synthesized NaY zeolites exhibit narrower crystal size distributions with the increase in *** growth rates determined from the variations of average crystal size with time are 51.09,157.50,46.17 and 24.75 nm·h^(-1),*** is found that the larger average crystal sizes at the alkalinity of 0.38 and 0.43 are attributed to the dominant role of crystal growth over ***,the combined action of prominent crystal growth and the longer duration periods of nucleation at the alkalinity of 0.38 and 0.43 results in broader crystal size *** findings demonstrate that control of the properties of NaY zeolite and the crystallization kinetics can be achieved by conducting the crystallization process in an appropriate range of alkalinity of the reaction mixture.

关键词： NaY zeolite Submolten salt depolymerized perlite Alkalinity Crystallization kinetics

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Alternative technology for the recovery of butyl acetate with low concentration:high capacity adsorbent and high efficiency adsorption

引用

Green chemical Engineering 2024年第2期5卷 236-244页

作者： Chi Ma Lihong Zhao Zhengxin Mao Hao Su Qingfen Liu CAS Key Laboratory of Green process and Engineering Institute of Process EngineeringChinese Academy of SciencesBeijing100190China School of chemical Engineering University of Chinese Academy of SciencesBeijing100049China

Industrial pharmaceutical wastewater usually contains butyl acetate(BA)with a concentration of 1 wt%-7 wt%,and the traditional method for BA recovery is distillation with high energy *** method is developed to recover BA with low concentration for the high efficiency and low energy *** polar polyacrylate resins with macroporous structure of 233.1 nm and average particle size of about 526.5μm are successfully synthesized by suspension polymerization and used for the BA adsorption and *** maximum adsorption capacity reaches 171.1 mg g^(-1)with relative standard deviation(RSD)value of 0.2%,which is more than twice the results in the *** BA desorption rate is 97.0%at 100℃with RSD value of 0.4%,and the resins are beneficial to the reuse in the adsorption-desorption *** adsorption thermodynamics and kinetics are investigated,and the BA adsorption is a spontaneous and endothermic process with the increase of disorder *** process is mainly contributed by physical absorption and agree well with Freundlich model and pseudo-first-order adsorption kinetic *** adsorption method avoids boiling a large amount of wastewater and hopefully provides a novel alternative technology for the BA recovery.

关键词： Butyl acetate recovery Resin adsorption Desorption Thermodynamics Kinetics

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Design method of extractant for liquid-liquid extraction based on elements and chemical bonds

引用

Chinese Journal of chemical Engineering 2024年第4期68卷 193-202页

作者： Yuwen Wei Chunling Zhang Yue Zhang Lili Wang Li Xia Xiaoyan Sun Shuguang Xiang institute of process System Engineering College of Chemical EngineeringQingdao University of Science and TechnologyQingdao 266042China Yantai Guobang chemical Machinery Technology Co. Ltd.Yantai 264002China

In the petrochemical industry process, the relative volatility between the components to be separated is close to one or the azeotrope that systems are difficult to separate. Liquid-liquid extraction is a common and effective separation method, and selecting an extraction agent is the key to extraction technology research. In this paper, a design method of extractants based on elements and chemical bonds was proposed. A knowledge-based molecular design method was adopted to pre-select elements and chemical bond groups. The molecules were automatically synthesized according to specific combination rules to avoid the problem of “combination explosion” of molecules. The target properties of the extractant were set, and the extractant meeting the requirements was selected by predicting the correlation physical properties of the generated molecules. Based on the separation performance of the extractant in liquid-liquid extraction and the relative importance of each index, the fuzzy comprehensive evaluation membership function was established, the analytic hierarchy process determined the mass ratio of each index, and the consistency test results were passed. The results of case study based on quantum chemical analysis demonstrated that effective determination of extractants for the analysis of benzene-cyclohexane systems. The results unanimously prove that the method has important theoretical significance and application value.

关键词： Molecular design Element and chemical bonds Molecular simulation Thermodynamics Solvent extraction

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Role of methoxy and C_(α)-based substituents in electrochemical oxidation mechanisms and bond cleavage selectivity of β-O-4 lignin model compounds

引用

Green Energy & Environment 2024年第1期9卷 114-125页

作者： Yang Zhou Qiang Zeng Hongyan He Kejia Wu Fuqiao Liu Xuehui Li School of Chemistry and chemical Engineering The Guangdong Provincial Key Laboratory of Green Chemical Product TechnologyState Key Laboratory of Pulp and Paper EngineeringSouth China University of TechnologyGuangzhouGuangdong510640China CAS Key Laboratory of Green process and Engineering Institute of Process EngineeringChinese Academy of SciencesBeijing100190China

In order to better understand the specific substituent effects on the electrochemical oxidation process of β-O-4 bond, a series of methoxyphenyl type β-O-4 dimer model compounds with different localized methoxyl groups, including 2-(2-methoxyphenoxy)-1-phenylethanone, 2-(2-methoxyphenoxy)-1-phenylethanol, 2-(2-methoxyphenoxy)-1-(4-methoxyphenyl)ethanone, 2-(2-methoxyphenoxy)-1-(4-methoxyphenyl)ethanol, 2-(2,6-dimethoxyphenoxy)-1-(4-methoxyphenyl)ethanone, 2-(2,6-dimethoxyphenoxy)-1-(4-methoxyphenyl)ethanol have been selected and their electrochemical properties have been studied experimentally by cyclic voltammetry, and FT-IR spectroelectrochemistry. Combining with electrolysis products distribution analysis and density functional theory calculations, oxidation mechanisms of all six model dimers have been explored. In particular, a total effect from substituents of both para-methoxy(on the aryl ring closing to Cα) and Cα-OH on the oxidation mechanisms has been clearly observed, showing a significant selectivity on the Cα-Cβbond cleavage induced by electrochemical oxidations.

关键词： Lignin model compounds β-O-4 dimers Electrochemical oxidation Oxidation mechanisms Substituent effect

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Long‐life lithium batteries enabled by a pseudo‐oversaturated electrolyte

引用

Carbon Energy 2024年第4期6卷 115-127页

作者： Youchun Yu Simeng Wang Juyan Zhang Weiwei Qian Nana Zhang Guangjie Shao Haiyan Bian Yuwen Liu Lan Zhang Hebei Key Laboratory of Applied Chemistry College of Environmental and Chemical EngineeringYanshan UniversityQinhuangdaoChina Beijing Key Laboratory of Ionic Liquids Clean process CAS Key Laboratory of Green Process and EngineeringInstitute of Process EngineeringChinese Academy of SciencesBeijingChina Haike Group Research institute of Innovation&Technology DongyingChina Langfang Green Industrial Technology Center LangfangChina

The specific energy of Li metal batteries(LMBs)can be improved by using high‐voltage cathode materials;however,achieving long‐term stable cycling performance in the corresponding system is particularly challenging for the liquid ***,a novel pseudo‐oversaturated electrolyte(POSE)is prepared by introducing 1,1,2,2‐tetrafluoroethyl‐2,2,3,3‐tetrafluoropropyl ether(TTE)to adjust the coordination structure between diglyme(G2)and lithium bis(trifluoromethanesulfonyl)imide(LiTFSI).Surprisingly,although TTE shows little solubility to LiTFSI,the molar ratio between LiTFSI and G2 in the POSE can be increased to 1:1,which is much higher than that of the saturation state,1:*** and experimental results prove that TTE promotes closer contact of the G2 molecular with Li^(+)in the ***,it also participates in the formation of electrolyte/electrode *** electrolyte shows outstanding compatibility with both the Li metal anode and typical high‐voltage ***||Li symmetric cells show a long life of more than 2000 h at 1 mA cm^(−2),1 mAh cm^(−2).In the meantime,Li||LiNi_(0.8)Co_(0.1)Mn_(0.1)O_(2)(NCM811)cell with the POSE shows a high reversible capacity of 134.8 mAh g^(−1 )after 900 cycles at 4.5 V,1 C *** concept of POSE can provide new insight into the Li^(+)solvation structure and in the design of advanced electrolytes for LMBs.

关键词： high voltage lithium metal batteries pseudo‐oversaturated electrolyte solid electrolyte interphases(SEI) solvation structure

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

欢迎您,

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

请选择保存的检索档案：

请选择收藏分类：

通借通还

欢迎您,

建议与咨询 留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

请选择保存的检索档案： 新增检索档案 确定 取消

请选择收藏分类： 新增自定义分类 确定 取消

通借通还

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

请选择保存的检索档案：

请选择收藏分类：