检索结果-南通市图书馆

International Journal of Minerals,Metallurgy and materials 2024年第10期31卷 2233-2243页

作者： Guonan Ma Shize Zhu Dong Wang Peng Xue BolüXiao Zongyi Ma Shi-changxu Innovation Center for Advanced materials Institute of Metal ResearchChinese Academy of SciencesShenyang 110016China Centre of Excellence for Advanced materials Dongguan 523808China

A high-zinc composite,12vol%SiC/Al-13.3 Zn-3.27 Mg-1.07Cu(wt%),with an ultra-high-strength of 781 MPa was success-fully fabricated through a powder metallurgy method,followed by an extrusion *** effects of solid-solution and aging heat treat-ments on the microstructure and mechanical properties of the composite were extensively *** with a single-stage sol-id-solution treatment,a two-stage solid-solution treatment(470℃/1 h+480℃/1 h)exhibited a more effective solid-solution strengthen-ing owing to the higher degree of solid-solution and a more uniform *** to the aging hardness curves of the com-posite,the optimized aging parameter(100℃/22 h)was *** the aging temperature and time resulted in finer and more uniform nanoscale precipitates but only yielded a marginal increase in tensile *** fractography analysis revealed that intergranu-lar cracking and interface debonding were the main fracture mechanisms in the ultra-high-strength SiC/Al-Zn-Mg-Cu *** regions,such as the SiC/Al interface containing numerous compounds and the precipitate-free zones at the high-angle grain boundaries,were identified as significant factors limiting the strength enhancement of the *** compounds,including MgO,MgZn2,and Cu5Zn8,reduced the interfacial bonding strength,leading to interfacial debonding.

关键词： metal matrix composites heat treatment interfacial reaction mechanical properties fracture mechanism

A novel(Sm0.2Eu0.2Gd0.2Ho0.2Yb0.2)CrO3 high-entropy ceramic nanofiber as a negative temperature coefficient thermistor

在线全文

学校读者我要写书评

暂无评论

Journal of Rare Earths 2024年第10期42卷 1937-1942页

作者： Weijun Zhao Meng Zhang Liyan Xue Kaixian Wang Fan Yang Jiuping Zhong Heng Chen School of materials Sun Yat-sen University Xiamen institute of Rare Earth materials Haixi InstituteChinese Academy of Sciences Xiamen Key Laboratory of Rare Earth Photoelectric Functional materials Xiamen Institute of Rare Earth MaterialsHaixi InstituteChinese Academy of Sciences Fujian Science & Technology Innovation Laboratory for Optoelectronic Information of China Advanced Energy Science and Technology Guangdong Laboratory Sichuan Jcc Rare Earth Metals New Material Co. Ltd.

The electrical properties of high-entropy ceramics（HECs） have been extensively studied in recent years due to their unique structural characteristics and fascinating functional properties induced by entropy *** high-entropy(Sm0.2Eu0.2Gd0.2Ho0.2Yb0.2)CrO3（HE-RECrO3） nanofibers were prepared by electro *** work demonstrates that HE-RECrO3nanofibe rs were successfully synthesized at a low temperature（800℃）,which is approximately 400 ℃ lower than the temperatures at which chromate ceramics were synthesized via the sol-gel method and the solid-state reaction *** resistivity of HE-RECrO3nanofibers decreases exponentially with increasing temperature from 25 to600℃.The logarithm of the resistivity is linearly related to the inverse of the temperature,confirming the negative temperature coefficient property of *** B25/50value of the HERECrO3nanofibers reaches 4072 *** conclusion,HE-RECrO3nanofibers are expected to be potential candidates for negative-temperature-coefficient（NTC） thermistors.

关键词： Ceramic fiber materials High-entropy ceramics Negative temperature coefficient thermistors Rare earths

High energy density in ultra-thick and flexible electrodes enabled by designed conductive agent/binder composite

在线全文

同方期刊数据库

学校读者我要写书评

暂无评论

Journal of Energy Chemistry 2024年第3期90卷 133-143,I0005页

作者： Xiaoyu Shen Hailong Yu Liubin Ben Wenwu Zhao Qiyu Wang Guanjun Cen Ronghan Qiao Yida Wu Xuejie Huang Beijing National Laboratory for Condensed Matter Physics Institute of PhysicsChinese Academy of SciencesBeijing 100190China Center of materials Science and Optoelectronics Engineering University of Chinese Academy of SciencesBeijing 100049China Songshan Lake materials Laboratory Dongguan 523808Guangdong China

Thick electrodes can increase incorporation of active electrode materials by diminishing the proportion of inactive constituents,improving the overall energy density of ***,thick electrodes fabricated using the conventional slurry casting approach frequently exhibit an exacerbated accumulation of carbon additives and binders on their surfaces,invariably leading to compromised electrochemical *** this study,we introduce a designed conductive agent/binder composite synthesized from carbon nanotube and *** agent/binder composite facilitates production of dry-process-prepared ultra-thick electrodes endowed with a three-dimensional and uniformly distributed percolative architecture,ensuring superior electronic conductivity and remarkable mechanical *** this approach,ultra-thick LiCoO_(2)(LCO) electrodes demonstrated superior cycling performance and rate capabilities,registering an impressive loading capacity of up to 101.4 mg/cm^(2),signifying a 242% increase in battery energy *** another analytical endeavor,time-of-flight secondary ion mass spectroscopy was used to clarify the distribution of cathode electrolyte interphase(CEI) in cycled LCO *** results provide unprecedented evidence explaining the intricate correlation between CEI generation and carbon distribution,highlighting the intrinsic advantages of the proposed dry-process approach in fine-tu ning the CEI,with excellent cycling performance in batteries equipped with ultra-thick electrodes.

关键词： Conductive agent/binder composite Dry process Ultra-thick electrodes High energy density CEI reconstruction ToF-SIMS

High-tenacity in-situ Ti/Zr-based bulk metallic glasses composites fabricated by industrial high-pressure die casting

在线全文

学校读者我要写书评

暂无评论

Journal of materials Science & Technology 2024年第3期170卷 177-185页

作者： Yang Li Wenbo Luo Ying Jin Zhiyong Xue Guiqing Wang Yanan Ren Haoxin Li Haibo Ke Baoan Sun Weihua Wang institute for Advanced materials North China Electric Power UniversityBeijing 102206China Songshan Lake materials Laboratory Dongguan 523808China institute of Physics Chinese Academy of SciencesBeijing 100190China

The glass-forming ability and mechanical properties of metallic glasses and their composites are well known to be sensitive to the preparation conditions and are highly deteriorated by industrial preparing conditions such as low-purity raw materials and low ***,we showed that a series of in-situ bulk metallic glass composites(BMGCs)which exhibit excellent ductility and segmental work hardening were successfully developed utilizing a high vacuum high-pressure die casting(HV-HPDC)technology along with industrial-grade raw *** tensile properties of these BMGCs are systematically investigated and correlated with the alloy *** compared with the copper mold suction casting method,the volume fraction difference of the dendrite phase for the BMGCs with the same composition is not significant when fabricated by the HV-HPDC,whereas the size of theβ-phase is generally *** BMGCs with the composition of Ti_(48)Zr_(20)(V_(12/17)Cu_(5/17))19 Be 13 obtained by the HV-HPDC process show ductility up to 11.3%under tension at room temperature and exhibit a certain amount of work *** conditions need to be met to enable the BMGCs,which are prepared by vacuum die-casting to retain favorable ductility:(1)The volume fraction ofβphase stays below 62%±2%;(2)The equiaxed crystals with a more uniform size in the range of 5-10μ***,the results of the present study provided guidance for developing BMGCs with good ductile properties under industrial conditions.

关键词： Vacuum die casting Bulk metallic glass composites Mechanical properties β-phase

Influences of divalent ion substitution on the magnetic and dielectric properties of W-type barium ferrite

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Chinese Physics B 2024年第6期33卷 480-486页

作者：何诗悦刘若水刘煦婕叶先平王利晨沈保根 School of Rare Earths University of Science and Technology of ChinaHefei 230026China Ganjiang Innovation academy Chinese Academy of SciencesGanzhou 341119China Ningbo institute of materials Technology&Engineering Chinese Academy of SciencesNingbo 315201China Beijing National Laboratory for Condensed Matter Physics Institute of PhysicsChinese Academy of SciencesBeijing 100190China

Saturation magnetization,magneto-crystalline anisotropy field,and dielectric properties are closely related to microwave devices applied at different *** regulating the magnetic and dielectric properties of W-type barium ferrites,single-phase BaMe_(2)Fe_(16)O_(27)(Me=Fe,Mn,Zn,Ni,Co) with different Me ions were synthesized by the high-temperature solid-state *** saturation magnetization(Ms) range from 47.77 emu/g to 95.34 emu/g and the magnetic anisotropy field(H_a) range from 10700.60 Oe(1 Oe=79.5775 A·m^(-1)) to 13739.57 Oe,depending on the type of cation substitution in the hexagonal *** dielectric permittivity and dielectric loss decrease with increasing frequency of the AC electric field in the low-frequency region,while they almost remain constant in the high-frequency *** charac teristics of easy regulation and preparation make it a potential candidate for use in microwave device applications.

关键词： W-type hexaferrite Raman spectra magnetic properties dielectric properties

Negligible normal fluid in superconducting state of heavily overdoped Bi_(2)Sr_(2)CaCu_(2)O_(8+δ) detected by ultra-low temperature angle-resolved photoemission spectroscopy

在线全文

学校读者我要写书评

暂无评论

Chinese Physics B 2024年第7期33卷 562-567页

作者：殷超辉汪清泓解于洋陈逸雯刘俊豪杨鉴刚贾俊杰张杏吕文凯闫宏涛戎洪涛张申金王志敏宗楠刘丽娟李如康王晓洋张丰丰杨峰彭钦军许祖彦刘国东毛寒青赵林李昕彤周兴江 National Laboratory for Superconductivity Beijing National Laboratory for Condensed Matter PhysicsInstitute of PhysicsChinese Academy of SciencesBeijing 100190China University of Chinese academy of sciences Beijing 100049China Technical institute of Physics and Chemistry Chinese Academy of SciencesBeijing 100190China Songshan Lake materials Laboratory Dongguan 523808China

In high temperature cuprate superconductors,it was found that the superfluid density decreases with the increase of hole *** natural question is whether there exists normal fluid in the superconducting state in the overdoped *** this paper,we have carried out high-resolution ultra-low temperature laser-based angle-resolved photoemission measurements on a heavily overdoped Bi2212 sample with a T_(c) of 48 *** find that this heavily overdoped Bi2212 remains in the strong coupling regime with 2Δ_(0)/(k_(B)T_(c))=*** single-particle scattering rate is very small along the nodal direction(~5 meV) and increases as the momentum moves from the nodal to the antinodal regions.A hard superconducting gap opening is observed near the antinodal region with the spectral weight at the Fermi level fully suppressed to *** normal fluid is found to be negligibly small in the superconducting state of this heavily overdoped *** results provide key information to understand the high T_(c) mechanism in the cuprate superconductors.

关键词： cuprate superconductor angle-resolved photoemission spectroscopy electronic structure

Theoretical analysis of frequency modulation-to-amplitude modulation on the final optics and target of the SG Ⅱ-Up laser facility

在线全文

学校读者我要写书评

暂无评论

High Power Laser Science and Engineering 2024年第1期12卷 84-98页

作者： Yujia Zhang Wei Fan Jiangfeng Wang Xiaochao Wang Xinghua Lu Dajie Huang Shouying Xu Yanli Zhang Mingying Sun Zhaoyang Jiao Shenlei Zhou Xiuqing Jiang Key Laboratory of High Power Laser and Physics Shanghai Institute of Optics and Fine MechanicsChinese Academy of SciencesShanghaiChina Center of materials Science and Optoelectronics Engineering University of Chinese Academy of SciencesBeijingChina

Frequency modulation(FM)-to-amplitude modulation(AM) conversion is an important factor that affects the time±power curve of inertial confinement fusion(ICF) high-power laser facilities. This conversion can impact uniform compression and increase the risk of damage to optics. However, the dispersive grating used in the smoothing by spectral dispersion technology will introduce a temporal delay and can spatially smooth the target. The combined effect of the dispersive grating and the focusing lens is equivalent to a Gaussian low-pass filter, which is equivalent to 8 GHz bandwidth and can reduce the intensity modulation on the target to below 5% with 0.3 nm @ 3 GHz + 20 GHz spectrum phase modulation. The results play an important role in the testing and evaluating of the FM-to-AM on the final optics and the target, which is beneficial for comprehensively evaluating the load capacity of the facility and isentropic compression experiment for ICF.

关键词： dispersion grating frequency modulation-to-amplitude modulation conversion high-power laser facility inertial confinement fusion phase modulation

Decoupling of temporal/spatial broadening effects in Doppler wind LiDAR by 2D spectral analysis

在线全文

学校读者我要写书评

暂无评论

Chinese Physics B 2024年第3期33卷 447-452页

作者：刘珍张云鹏竹孝鹏刘继桥毕德仓陈卫标 Space Laser Engineering Department Shanghai Institute of Optics and Fine MechanicsChinese Academy of SciencesShanghai 201800China Center of materials Science and Optoelectronics Engineering University of Chinese Academy of SciencesBeijing 100049China

Pulse echo accumulation is commonly employed in coherent Doppler wind LiDAR(light detection and ranging)under the assumption of steady ***,the measured spectral data are analyzed in the time dimension and frequency dimension to cope with the temporal wind shear and achieve the optimal accumulation time.A hardware-efficient algorithm combining the interpolation and cross-correlation is used to enhance the wind retrieval accuracy by reducing the frequency sampling interval and then reduce the spectral width calculation ***,the temporal broadening effect and spatial broadening effect are decoupled according to the strategy we developed.

关键词： Doppler wind LiDAR spectral analysis hardware efficiency spectrum broadening effects

Theory of small-scale self-focusing of spatially partially coherent beams and its implications for high-power laser systems

在线全文

学校读者我要写书评

暂无评论

High Power Laser Science and Engineering 2024年第3期12卷 84-89页

作者： Ruifeng Wang Xiaoqi Zhang Yanli Zhang Fanglun Yang Jianhao Tang Ziang Chen Jianqiang Zhu Key Laboratory of High Power Laser and Physics Shanghai Institute of Optics and Fine MechanicsChinese Academy of SciencesShanghaiChina Center of materials Science and Optoelectronics Engineering University of Chinese Academy of SciencesBeijingChina

Based on the paraxial wave equation,this study extends the theory of small-scale self-focusing(SSSF)from coherent beams to spatially partially coherent beams(PCBs)and derives a general theoretical equation that reveals the underlying physics of the reduction in the B-integral of spatially *** the analysis of the simulations,the formula for the modulational instability(MI)gain coefficient of the SSSF of spatially PCBs is obtained by introducing a decrease factor into the formula of the MI gain coefficient of the SSSF of coherent *** decrease can be equated to a drop in the injected light intensity or an increase in the critical *** to this formula,the reference value of the spatial coherence of spatially PCBs is given,offering guidance to overcome the output power limitation of the high-power laser driver due to SSSF.

关键词： B-integral complex screen method nonlinearity small-scale self-focusing spatially partially coherent beams

Macro-superlubricity in sputtered MoS_(2)-based films by decreasing edge pinning effect

在线全文

学校读者我要写书评

暂无评论

Friction 2024年第1期12卷 52-63页

作者： Chunmeng DONG Dong JIANG Yanlong FU Desheng WANG Qinqin WANG Lijun WENG Ming HU Xiaoming GAO Jiayi SUN State Key Laboratory of Solid Lubrication Lanzhou Institute of Chemical PhysicsChinese Academy of SciencesLanzhou 730000China Center of materials Science and Optoelectronics Engineering University of Chinese Academy of SciencesBeijing 100049China

To date,MoS_(2) can only be achieved at *** pinning effect caused by structure defects is the most obvious barrier to expand the size of structural superlubricity to ***,we plan to pin edge planes of MoS_(2) with nanospheres,and then the incommensurate structure can be formed between adjacent rolling nanoparticles to reduce *** sputtered MoS_(2) film was prepared by the physical vapor deposition(PVD)in *** enough Cu_(2)O nanospheres(~40 nm)were generated in situ at the edge plane of MoS_(2) layers by liquid phase *** incommensurate structure(mismatch angle(θ)=8°)caused by MoS_(2) layers was formed before *** friction coefficient of the films(5 N,1,000 r/min)was~6.0×10^(−3) at the *** friction,MoS_(2) layers pinned on numerous of Cu_(2)O nanoparticles reduced its edge pinning effect and decreased ***,much more incommensurate was formed,developing macro-superlubricity.

关键词： sputtered MoS_(2)film Cu_(2)O nanospheres edge pinning effect macro-superlubricity