检索结果-南通市图书馆

Comparative Analysis of Diagonal and Centrifugal Compressors with Synergy Theory in Compressed Air energy Storage System

引用

Journal of Thermal Science 2024年第4期33卷 1325-1339页

作者： ZHANG Yuxin ZUO Zhitao ZHOU Xin GUO Wenbin CHEN Haisheng institute of Engineering Thermophysics Chinese Academy of Sciences University of Chinese Academy of Sciences National energy Large Scale Physical energy Storage Technologies R&D Center of Bijie Nanjing institute of Future energy System IETCAS

energy storage technology is an essential part of the efficient energy system.Compressed air energy storage(CAES) is considered to be one of the most promising large-scale physical energy storage technologies.It is favored because of its low-cost,long-life,environmentally friendly and low-carbon characteristics.The compressor is the core component of CAES,and the performance is critical to the overall system efficiency.That importance is not only reflected in the design point,but also in the continuous efficient operation under variable working conditions.The diagonal compressor is currently the focus of the developing large-scale CAES because of its stronger flow capacity compared with traditional centrifugal compressors.And the diagonal compressor has the higher single stage pressure ratio compared with axial compressors.In this paper,the full three dimensional numerical simulation technologies with synergy theory are used to compare and analyze the internal flow characteristics.The performance of the centrifugal and diagonal impellers that are optimized under the same requirements for large-scale CAES has been analyzed.The relationship between the internal flow characteristics and performance of the centrifugal and diagonal impellers with the change of mass flow rates and total inlet temperature is given qualitatively and quantitatively.Where the cosine value of the synergy angle is high,the local flow loss is large.The smaller proportion of the positive area is the pursuit of design.Through comparative analysis,it is concluded that the internal flow and performance changes of centrifugal and diagonal impellers are different.The results confirm the superiority and feasibility of the off-design performance of the diagonal compressor applied to the developing large-scale CAES.

关键词： compressed air energy storage synergy theory diagonal compressor centrifugal compressor comparative analysis

来源：

同方期刊数据库评论

在线全文

同方期刊数据库

学校读者我要写书评

暂无评论

Magnetic-biased chiral molecules enabling highly oriented photovoltaic perovskites

引用

National Science Review 2024年第2期11卷 221-230页

作者： Jing Chen Caner Deger Zhen-Huang Su Kai-Li Wang Guang-Peng Zhu Jun-Jie Wu Bing-Chen He Chun-Hao Chen Tao Wang Xing-Yu Gao Ilhan Yavuz Yan-Hui Lou Zhao-Kui Wang Liang-Sheng Liao institute of Functional Nano&Soft Materials(FUNSOM) Laboratory of Advanced Negative Carbon TechnologiesSoochow University Department of Physics Marmara University Shanghai Synchrotron Radiation Facility(SSRF) Shanghai Advanced Research InstituteChinese Academy of Sciences College of energy Soochow Institute for Energy and Materials Innovations Soochow University Macao institute of Materials Science and Engineering Macau University of Science and Technology

The interaction between sites A, B and X with passivation molecules is restricted when the conventional passivation strategy is applied in perovskite（ABX3） photovoltaics. Fortunately, the revolving A-site presents an opportunity to strengthen this interaction by utilizing an external field. Herein, we propose a novel approach to achieving an ordered magnetic dipole moment, which is regulated by a magnetic field via the coupling effect between the chiral passivation molecule and the A-site（formamidine ion） in perovskites.This strategy can increase the molecular interaction energy by approximately four times and ensure a well-ordered molecular arrangement. The quality of the deposited perovskite film is significantly optimized with inhibited nonradiative recombination. It manages to reduce the open-circuit voltage loss of photovoltaic devices to 360 mV and increase the power conversion efficiency to 25.22%. This finding provides a new insight into the exploration of A-sites in perovskites and offers a novel route to improving the device performance of perovskite photovoltaics.

关键词： perovskite photovoltaics magnetic moment A-site regulation chiral molecules

来源：

同方期刊数据库评论

在线全文

同方期刊数据库

学校读者我要写书评

暂无评论

Stage separation of recoverable liquid launch vehicle by using moving pulsating ball analogue for propellant sloshing

引用

Chinese Journal of Aeronautics 2024年第2期37卷 360-370页

作者： Yu LU Baozeng YUE Bailong HAO Bole MA Feng LIU Yuanyuan CHANG School of Aerospace Engineering Beijing Institute of TechnologyBeijing 100081China Beijing institute of Astronautical systems Engineering Beijing 100076China

In the process of stage separation of recoverable liquid launch vehicles,because of the large amount of residual fuel in the storage tanks,the influence of liquid sloshing on separation safety must be considered.Considering calculation simplicity and operation practicability,the Moving Pulsating Ball Model(MPBM)of large amplitude liquid sloshing is introduced into the calculation of launch vehicle stage separation.Combining the dynamic equation of the model with the energy relationship during"breathing movement",the formula calculating the force of liquid on the rigid body is derived.Compared with the calculations of commercial CFD calculation software,the accuracy of MPBM model is verified.Then,all the external forces and moments are applied to the rigid body of the stages,so that the translational and rotational dynamic equations of the stages are obtained respectively.According to the relative position of the two stages,the geometric shape of the interstage section and the engine of the second stage,the minimum clearance in the separation process can be decided to guarantee that the separation process is safe.

关键词： Moving Pulsating Ball Model(MPBM) Dynamics of stage separation Large amplitude sloshing Recoverable liquid launch vehicle Flight dynamics

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Promoted monolithic perovskite/organic tandem solar cells through elaborate manipulation of light transmission and carrier tunneling in interconnect junction

引用

Science China Chemistry 2024年

作者： Rongbo Wang Jiawei Zhang Juntao Zhao Ya Wang Yi Ding Ying Zhao Xiaodan Zhang Guofu Hou institute of Photoelectronic Thin Film Devices and Technology Renewable Energy Conversion and Storage Center Solar Energy Conversion Center Nankai University Key Laboratory of Photoelectronic Thin Film Devices and Technology of Tianjin Engineering Research Center of Thin Film Photoelectronic Technology of Ministry of Education State Key Laboratory of Photovoltaic Materials and solar Cells Tianjin

Monolithic perovskite/organic tandem solar cells（TSCs） have emerged as promising thin film solar cells. It is recognized that interconnect junction plays a pivotal role in tandem devices. Consequently, wide bandgap Cs0.25FA0.75Pb(I0.6Br0.4)3perovskite top-cell and narrow bandgap PM6:Y6:PC61BM ternary organic bottom-cell were integrated in this study with several kinds of thin metal interconnect layers, which provides feasibility to elaborately manipulate light transmission and carrier tunneling process in interconnect junction. It is confirmed that, in comparison with Au, employing an Ag interconnect layer elevates integrated transmittance of light in longer wavelength regions, mainly because of the alleviated screening effect with a lower free electron concentration, which offers sufficient light harvest for the bottom-cell. Meanwhile, established energy barriers with moderate height afford convenient extraction and recombination for both holes and electrons. Hence, the performance of TSCs is promoted substantially. Moreover, an innovative Ag/Au double interconnect layer is proposed accordingly, which can preserve exceptional conductivity and light transmission and further reduce barrier height, especially for hole tunneling, by optimizing the band alignment between the interconnect layer and bottom-cell. Resultantly, the monolithic perovskite/organic TSC with a striking efficiency of 23.26% is achieved. In a word, this study can pave a general approach toward high-performance TSCs integration.

关键词：

来源：

同方期刊数据库评论

在线全文

同方期刊数据库

学校读者我要写书评

暂无评论

Effects of conductive agent type on lithium extraction from salt lake brine with LiFePO_(4) electrodes

引用

International Journal of Minerals,Metallurgy and Materials 2024年第4期31卷 678-687页

作者： Zhen Zhang Pan Luo Yan Zhang Yuhan Wang Li Liao Bo Yu Mingshan Wang Junchen Chen Bingshu Guo Xing Li School of New energy and Materials Southwest Petroleum UniversityChengdu 610500China energy Storage Research institute Southwest Petroleum UniversityChengdu 610500China

Electrochemical lithium extraction from salt lakes is an effective strategy for obtaining lithium at a low cost.Nevertheless,the elevated Mg:Li ratio and the presence of numerous coexisting ions in salt lake brines give rise to challenges,such as prolonged lithium extraction periods,diminished lithium extraction efficiency,and considerable environmental pollution.In this work,Li FePO4(LFP)served as the electrode material for electrochemical lithium extraction.The conductive network in the LFP electrode was optimized by adjusting the type of conductive agent.This approach resulted in high lithium extraction efficiency and extended cycle life.When the single conductive agent of acetylene black(AB)or multiwalled carbon nanotubes(MWCNTs)was replaced with the mixed conductive agent of AB/MWCNTs,the average diffusion coefficient of Li+in the electrode increased from 2.35×10^(-9)or 1.77×10^(-9)to 4.21×10^(-9)cm^(2)·s^(-1).At the current density of 20 mA·g^(-1),the average lithium extraction capacity per gram of LFP electrode increased from 30.36 mg with the single conductive agent(AB)to 35.62 mg with the mixed conductive agent(AB/MWCNTs).When the mixed conductive agent was used,the capacity retention of the electrode after 30 cycles reached 82.9%,which was considerably higher than the capacity retention of 65.8%obtained when the single AB was utilized.Meanwhile,the electrode with mixed conductive agent of AB/MWCNTs provided good cycling performance.When the conductive agent content decreased or the loading capacity increased,the electrode containing the mixed conductive agent continued to show excellent electrochemical performance.Furthermore,a self-designed,highly efficient,continuous lithium extraction device was constructed.The electrode utilizing the AB/MWCNT mixed conductive agent maintained excellent adsorption capacity and cycling performance in this device.This work provides a new perspective for the electrochemical extraction of lithium using LFP electrodes.

关键词： salt lake brine lithium extraction electrochemical lithium extraction conductive agent extraction efficiency adsorption capacity

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

solar-driven photothermal catalytic CO2 conversion:a review

引用

Rare Metals 2024年第7期43卷 2913-2939页

作者： Bachirou Guene Lougou Bo-Xi Geng Ru-Ming Pan Wei Wang Tian-Tian Yan Fang-Hua Li Hao Zhang Oraléou Sangué Djandja Yong Shuai Meisam Tabatabaei Daniel Sabi Takou School of energy Science and Engineering Harbin Institute of Technology MIIT Key Laboratory of Critical Materials Technology for New energy Conversion and Storage Harbin Institute of Technology State Key Laboratory of Urban Water Resource and Environment Harbin Institute of Technology School of Electrical Engineering and Automation Harbin Institute of Technology Guangdong Provincial Key Laboratory of Distributed energy systems Engineering Research Center of None-Food Biomass Efficient Pyrolysis and Utilization Technology of Guangdong Higher Education InstitutesDongguan University of Technology Higher Institution Centre of Excellence (HICoE) Institute of Tropical Aquaculture and Fisheries (AKUATROP)Universiti Malaysia Terengganu Department of Biomaterials Saveetha Dental CollegeSaveetha Institute of Medical and Technical Sciences école Polytechnique d'Abomey-Calavi University of Abomey-Calavi

It is highly desirable to seek green and sustainable technologies,such as employing photo thermal effects to drive energy catalysis processes to address the high energy demand and associated environmental impacts induced by the current methods.The photothermocatalysis process is an emerging research area with great potential in efficiently converting solar energy through various catalytic reactions.However,achieving simultaneously high conversion efficiency,cyclability,and durability is still a daunting challenge.Thus,tremendous work is still needed to enhance solar photo thermal catalytic conversion and promote its large-scale applications.This review developed the principles of coupling solar photon and thermal fields underlying the photothermal effect,exploration of efficient nanocatalysts,development of optofluidic reactor model,and photo thermal synergistic-driven CO2reduction mechanisms.The ultimate goal was to provide an effective approach that can effectively convert solar energy into photocarriers/hot-electrons and heat,and importantly,can couple them to regulate catalysis reaction pathways toward the production of value-added fuel and chemical energy.

关键词： Photochemistry Photothermal CO 2 catalytic conversion Nanomaterial solar fuels and chemicals

来源：

同方期刊数据库评论

在线全文

同方期刊数据库

学校读者我要写书评

暂无评论

Vertical plane depth-resolved surface potential and carrier separation characteristics in flexible CZTSSe solar cells with over 12% efficiency

引用

Carbon energy 2024年第3期6卷 36-52页

作者： Dae-Ho Son Ha Kyung Park Dae-Hwan Kim Jin-Kyu Kang Shi-Joon Sung Dae-Kue Hwang Jaebaek Lee Dong-Hwan Jeon Yunae Cho William Jo Taeseon Lee JunHo Kim Sang-Hoon Nam Kee-Jeong Yang Division of energy Technology DGISTDaeguRepublic of Korea Research Center for Thin Film solar Cells DGISTDaeguRepublic of Korea Department of Physics Ewha Womans UniversitySeoulRepublic of Korea Department of Physics Incheon National UniversityIncheonRepublic of Korea Department of Mechanical Engineering Massachusetts Institute of TechnologyCambridgeMassachusettsUSA

Cu2ZnSn(S,Se)4(CZTSSe)solar cells have resource distribution and economic advantages.The main cause of their low efficiency is carrier loss resulting from recombination of photo-generated electron and hole.To overcome this,it is important to understand their electron-hole behavior characteristics.To determine the carrier separation characteristics,we measured the surface potential and the local current in terms of the absorber depth.The elemental variation in the intragrains(IGs)and at the grain boundaries(GBs)caused a band edge shift and bandgap(Eg)change.At the absorber surface and subsurface,an upward Ec and Ev band bending structure was observed at the GBs,and the carrier separation was improved.At the absorber center,both upward Ec and Ev and downward Ec-upward Ev band bending structures were observed at the GBs,and the carrier separation was degraded.To improve the carrier separation and suppress carrier recombination,an upward Ec and Ev band bending structure at the GBs is desirable.

关键词： carrier separation CZTSSe flexible solar cell local current surface potential

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Tailored multifunctional hydrazine derivatives for efficient printable hole-conductive-free mesoscopic perovskite solar cells via enhancing defect passivation

引用

Journal of energy Chemistry 2024年第8期95卷 357-363页

作者： Minghao Xia Ziwei Zheng Yanjie Cheng Chaoyang Wang Zhaozhen Cui Guodong Zhang Jinwei Gonga Anyi Mei Hongwei Han Michael Gr?tzel Center for Mesoscopic solar Cells Wuhan National Laboratory for Optoelectronics Key Laboratory of Materials Chemistry for Energy Conversion and Storage of Ministry of Education Huazhong University of Science and Technology Key Laboratory of Flexible Electronics(KLoFE) & institute of Advanced Materials(IAM) School of Flexible Electronics(Future Technologies) Nanjing Tech University (NanjingTech)

The low-cost and easy large-scale fabrication advantages of printable mesoscopic perovskite solar cells(p-MPSCs) are overshadowed by their limited photovoltaic conversion efficiency(PCE). Here, we introduce the hydrazide derivative of 4-Hydroxybenzoylhydrazine(4-HBH) to improve the PCE of p-MPSCs by inducing enhanced defect passivation. Both carbonyl and hydrazine groups in hydrazide groups present strong interaction with perovskite. The hydroxyl group, as an electron donor group, increases the electron cloud density of the hydrazide group in 4-HBH under the conjugation of the benzene ring,and thus enhances its interaction with perovskite. Additionally, the hydroxy group itself interacts with perovskite and passivates defects synergistically. The hydrazine agents can also reduce I2and suppress the loss of iodine in perovskite films, which inhibits the formation of iodine-related defects.Consequently, p-MPSCs with 4-HBH achieve a high PCE of 19.21%, and present well improved stability.

关键词： Conjugation redox activity Cooperative coordination Multifunctional hydrazine derivatives Printable mesoscopic perovskite solar cells

来源：

同方期刊数据库评论

在线全文

同方期刊数据库

学校读者我要写书评

暂无评论

Oxygen reduction electrocatalysis:From conventional to single-atomic platinum-based catalysts for proton exchange membrane fuel cells

引用

Frontiers in energy 2024年第2期18卷 206-222页

作者： Cheng YUAN Shiming ZHANG Jiujun ZHANG institute for Sustainable energy/College of Sciences Shanghai UniversityShanghai 200444China

Platinum(Pt)-based materials are still the most efficient and practical catalysts to drive the sluggish kinetics of cathodic oxygen reduction reaction(ORR)in proton exchange membrane fuel cells(PEMFCs).However,their catalysis and stability performance still need to be further improved in terms of corrosion of both carbon support and Pt catalyst particles as well as Pt loading reduction.Based on the developed synthetic strategies of alloying/nanostructuring Pt particles and modifying/innovating supports in developing conventional Pt-based catalysts,Pt single-atom catalysts(Pt SACs)as the recently burgeoning hot materials with a potential to achieve the maximum utilization of Pt are comprehensively reviewed in this paper.The design thoughts and synthesis of various isolated,alloyed,and nanoparticlecontained Pt SACs are summarized.The single-atomic Pt coordinating with non-metals and alloying with metals as well as the metal-support interactions of Pt single-atoms with carbon/non-carbon supports are emphasized in terms of the ORR activity and stability of the catalysts.To advance further research and development of Pt SACs for viable implementation in PEMFCs,various technical challenges and several potential research directions are outlined.

关键词： oxygen reduction electrocatalysis Pt singleatom catalysts conventional Pt-based catalysts design thoughts and synthesis metal-support interactions

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Identifying the Active Site of Water Oxidation Catalyst Based on Defective Fe-Doped Ni Oxyhydroxide

引用

CCS Chemistry 2024年第2期6卷 365-376页

作者： Yunxuan Ding Jian Du Tao Wang Licheng Sun institute of Natural Sciences Westlake Institute for Advanced StudyHangzhou 310024 Center of Artificial Photosynthesis for solar Fuels Department of ChemistrySchool of ScienceWestlake UniversityHangzhou 310024

Electrochemical water splitting plays a crucial role in storing sustainable energy into H2 as an ideal fuel,in which the anodic oxygen evolution reaction(OER)is the bottleneck.Currently,Fe-doped NiOOH(Ni_(1−x)Fe_(x)OOH)is a promising OER catalyst under alkaline conditions.However,the specific active sites responsible for their good performances remain debatable.Here,we identify a nickel-oxygen radical(Ni–O·)and an iron-oxo(Fe=O)group as two essential states for adsorbed oxygen.Meanwhile,both thermochemical O–O coupling and electrochemical OER elementary steps are considered on the Ni_(1−x)Fe_(x)OOH catalysts.Sophisticated mechanistic studies with a combined density functional theory simulation and experimental analysis unravel that both the Ni and Fe centers can act as the active sites for the defective Ni_(1−x)Fe_(x)OOH to catalyze OER,depending on the nature of the defect.The presence of Fe can benefit the stabilization of the defective surface and influence the electronic property of the nearby Ni site.This work not only identifies the intrinsic active sites of Ni_(1−x)Fe_(x)OOH,but also illustrates the essential roles of defects in catalysis,which sheds light on the design of more efficient OER catalysts in the future.

关键词： defect water nucleophilic attack oxygen evolution reaction heterogeneous catalysis density functional calculations

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

欢迎您,

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

请选择保存的检索档案：

请选择收藏分类：

通借通还

欢迎您,

建议与咨询 留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

请选择保存的检索档案： 新增检索档案 确定 取消

请选择收藏分类： 新增自定义分类 确定 取消

通借通还

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

请选择保存的检索档案：

请选择收藏分类：