检索结果-南通市图书馆

Effect of Ni content on the wear behavior of Al-Si-Cu-Mg-Ni/SiC particles composites

在线全文

学校读者我要写书评

暂无评论

International Journal of Minerals,Metallurgy and Materials 2024年第2期31卷 374-383页

作者： Yanyu Liu Lina Jia Wenbo Wang Zuheng Jin Hu Zhang School of Materials Science and Engineering Beihang UniversityBeijing 100191China Ningbo institute of Technology Beihang UniversityNingbo 315100China Qingdao research institute of Beihang University Qingdao 266000China research institute for Frontier Science Beihang UniversityBeijing 100191China

In recent years,the addition of Ni has been widely acknowledged to be capable of enhancing the mechanical properties of Al-Si ***,the effect of Ni on the wear behaviors of Al-Si alloys and Al matrix composites,particularly at elevated temperat-ures,remains an understudied *** this study,Al-Si-Cu-Mg-Ni/20wt%SiC particles(SiCp)composites with varying Ni contents were prepared by using a semisolid stir casting *** effect of Ni content on the dry sliding wear behavior of the prepared compos-ites was investigated through sliding tests at 25 and 350℃.Results indicated that theθ-Al_(2)Cu phase gradually diminished and eventually disappeared as the Ni content increased from 0wt%to 3wt%.This change was accompanied by the formation and increase inδ-Al_(3)CuNi andε-Al_(3)Ni phases in *** hardness and ultimate tensile strength of the as-cast composites improved,and the wear rates of the composites decreased from 5.29×10^(−4)to 1.94×10^(−4)mm^(3)/(N∙m)at 25℃and from 20.2×10^(−4)to 7×10^(−4)mm^(3)/(N∙m)at 350℃with the increase in Ni content from 0wt%to 2wt%.The enhancement in performance was due to the presence of strengthening network structures and additional Ni-containing phases in the ***,the wear rate of the 3Ni composite was approximately two times higher than that of the 2Ni composite due to the fracture and debonding of theε-Al_(3)Ni *** wear,delamination wear,and oxidation wear were the predominant wear mechanisms of the investigated composites at 25℃,whereas delamination wear and oxid-ation wear were dominant during sliding at 350℃.

关键词： Al matrix composite microstructure sliding test high temperature wear mechanism

A new production component method for natural gas development planning

在线全文

学校读者我要写书评

暂无评论

Energy Geoscience 2024年第1期5卷 283-292页

作者： Fanliao Wang Jiangchen Han Shucheng Liu Yanqing Liu Kun Su Jing Du Liru Wang Petroleum Exploration and Production research institute SINOPECBeijing102206China research institute of Petroleum Exploration&Development PetroChinaBeijing100083China

Based on an analysis of the limitations of conventional production component methods for natural gas development planning,this study proposes a new one that uses life cycle models for the trend fitting and prediction of *** this new method,the annual production of old and new wells is predicted by year first and then is summed up to yield the production for the planning *** shows that the changes in the production of old wells in old blocks can be fitted and predicted using the vapor pressure model(VPM),with precision of 80%e95%,which is 6.6%e13.2%higher than that of other life cycle ***,a new production prediction process and method for new wells have been established based on this life cycle model to predict the production of medium-to-shallow gas reservoirs in western Sichuan Basin,with predication error of production rate in 2021 and 2022 being 6%and 3%*** new method can be used to guide the medium-and long-term planning or annual scheme preparation for gas *** is also applicable to planning for large single gas blocks that require continuous infill drilling and adjustment to improve gas recovery.

关键词： Production component method Production prediction Life cycle model Gas development planning Western Sichuan Basin

The role of Piezo1 and Piezo2 proteins in tissue engineering:A Comprehensive review

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Engineered Regeneration 2024年第2期5卷 170-185页

作者： Tejaswini Tadge Ashwini Pattewar Namdev More Srivalliputtur Sarath Babu Ravichandiran Velyutham Govinda Kapusetti National institute of Pharmaceutical Education and research KolkataWest Bengal 700054India National institute of Pharmaceutical Education and research AhmedabadGujarat 382355India

Almost every life form,from the tiniest bacterium to humans,is mechanosensitive,implying it can use mechani-cal stresses to trigger certain physiological responses in the form of electric *** largely relies on ion channels that respond to mechanical forces,such as the epithelial sodium channels/degenerins,tran-sient receptor potential channel,and the two-pore domain potassium ***1 and Piezo2 proteins were discovered to be the biggest non-selective mechanosensitive cation channels in the cell membrane.A substantial amount of research has previously been published on the Piezo channel’s function in touch sensation,balance,and cardiovascular ***,the mechanistic perspective must be refined to fully understand the role of Piezo proteins in tissue *** review centers on the latest insights into the structure of Piezo chan-nels,activation mechanisms,and its interactions with cytoskeletal components,by emphasizing the physiological activities of Piezo channels in different *** study also places focus on the possibilities of targeting this cation channel family as a tissue regeneration aid.

关键词： Piezo1 Piezo2 Mechanotransduction Tissue regeneration Mechanoreceptors

Predict the evolution of mechanical property of Al-Li alloys in a marine environment

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Defence Technology（防务技术） 2024年第1期31卷 557-566页

作者： Wei Li Lin Xiang Guang Wu Hongli Si Jinyan Chen Yiming Jin Yan Su Jianquan Tao Chunyang Huang State Key Laboratory of Explosion Science and Technology Beijing Institute of TechnologyBeijing100036China Chongqing Innovation Center Beijing Institute of TechnologyChongqing400044China First research institute of the Ministry of Public Security for PR China Beijing100036China Southwest Technology and Engineering research institute Chongqing400039China

The ocean is one of the essential fields of national defense in the future,and more and more attention is paid to the lightweight research of Marine equipment and *** study it is to develop a Machine learning(ML)-based prediction method to study the evolution of the mechanical properties of Al-Li alloys in the marine *** obtained the mechanical properties of Al-Li alloy samples under uniaxial tensile deformation at different exposure times through Marine exposure *** obtained the strain evolution by digital image correlation(DIC).The strain field images are voxelized using 2D-Convolutional Neural Networks(CNN)autoencoders as input data for Long Short-Term Memory(LSTM)neural ***,the output data of LSTM neural networks combined with corrosion features were input into the Back Propagation(BP)neural network to predict the mechanical properties of Al-Li *** main conclusions are as follows:*** variation law of mechanical properties of2297-T8 in the Marine atmosphere is *** the increase in outdoor exposure test time,the tensile elastic model of 2297-T8 changes slowly,within 10%,and the tensile yield stress changes significantly,with a maximum attenuation of 23.6%.*** prediction model can predict the strain evolution and mechanical response simultaneously with an error of less than 5%.*** study shows that a CNN/LSTM system based on machine learning can be built to capture the corrosion characteristics of Marine exposure *** results show that the relationship between corrosion characteristics and mechanical response can be predicted without considering the microstructure evolution of metal materials.

关键词： Marine environment Al-Li alloy Machine learning Corrosion

Underwater Directional Acoustic Source Based on Pentamode Material

在线全文

学校读者我要写书评

暂无评论

Acta Mechanica Solida Sinica 2024年第1期37卷 1-9页

作者： Binghao Zhao Peng Wang Dongwei Wang Gengkai Hu School of Aerospace Engineering Beijing Institute of TechnologyBeijing 100081China Wuhan Second Ship Design and research institute Wuhan 430205China

An underwater directional acoustic emitter is conceived with a highly anisotropic lattice material,whose acoustic characteristics manifest strong dependence on the orientation of the lattice material’s principal *** these features,a cylindrical structure made of such anisotropic lattice material is engineered to possess distinct impedance values in different directions,thereby facilitating wave emission along the principal axis while inducing reflection in other ***,through numerical simulations,it is demonstrated that the emission direction can be effectively manipulated by adjusting the principal axis orientation,concurrently enhancing the emitted *** contrast to previous directional acoustic structures,the compact emitter presented in this study can get rid of the size-wavelength constraint,enabling effective control of low-frequency waves.

关键词： Underwater Directional emission Pentamode material Broadband frequency

A seismic elastic moduli module for the measurements of low-frequency wave dispersion and attenuation of fluid-saturated rocks under different pressures

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Petroleum Science 2024年第1期21卷 162-181页

作者： Yan-Xiao He Shang-Xu Wang Gen-Yang Tang Chao Sun Hong-Bing Li San-Yi Yuan Xian Wei Li-Deng Gan Xiao-Feng Dai Qiang Ge Peng-Peng Wei Hui-Qing Zhang National Key Laboratory of Petroleum Resources and Engineering CNPC Key Lab of Geophysical ExplorationCollege of GeophysicsChina University of Petroleum(Beijing)Beijing102249China School of Resources and Geosciences China University of Mining and TechnologyXuzhou221116JiangsuChina research institute of Petroleum Exploration and Development CNPCBeijing100083China Beijing Vocational College of Labour and social Security Beijing100029China PetroChina Dagang Oilfield Exploration and Development research institute CNPCTianjin300280China

Knowledge about the seismic elastic modulus dispersion,and associated attenuation,in fluid-saturated rocks is essential for better interpretation of seismic observations taken as part of hydrocarbon identification and time-lapse seismic surveillance of both conventional and unconventional reservoir and overburden performances.A Seismic Elastic Moduli Module has been developed,based on the forced-oscillations method,to experimentally investigate the frequency dependence of Young's modulus and Poisson's ratio,as well as the inferred attenuation,of cylindrical samples under different confining pressure *** with three standard samples showed that the measured elastic moduli were consistent with the published data,indicating that the new apparatus can operate reliably over a wide frequency range of f∈[1-2000,10^(6)]*** Young's modulus and Poisson's ratio of the shale and the tight sandstone samples were measured under axial stress oscillations to assess the frequency-and pressure-dependent *** dry condition,both samples appear to be nearly frequency independent,with weak pressure dependence for the shale and significant pressure dependence for the *** particular,it was found that the tight sandstone with complex pore microstructure exhibited apparent dispersion and attenuation under brine or glycerin saturation conditions,the levels of which were strongly influenced by the increased effective *** addition,the measured Young's moduli results were compared with the theoretical predictions from a scaled poroelastic model with a reasonably good agreement,revealing that the combined fluid flow mechanisms at both mesoscopic and microscopic scales possibly responsible for the measured dispersion.

关键词： Low-frequency measurements Dispersion and attenuation Rock physics Fluid flow

Dielectric and energy storage properties of PbO–SrO–Nb_(2)O_(5)–Na_(2)O–Si thin films by annealing

在线全文

学校读者我要写书评

暂无评论

Rare Metals 2024年第1期43卷 351-355页

作者： Fei-Hu Tan Qing-Meng Zhang Feng Wei Hong-Bin Zhao Xiao Zhang Jun Du State Key Laboratory of Advanced Materials for Smart Sensing General Research Institute for Nonferrous MetalsBeijing 100088China Advanced Electronic Materials institute General Research Institute for Nonferrous MetalsBeijing 100088China

Dielectric and energy storage properties of PbOSrO-Na_(2)O-Nb_(2)O_(5)-SiO_(2)(PSNNS) thin films with annealing temperature from 700 to 850 ℃ were investigated by measuring their capacitance-electric filed curve and hysteresis *** results show that the highest dielectric constant and energy density are 81.2 and 17.0 J·cm^(-3),respectively,which is obtained in the sample with annealing temperature of 800 ℃.Annealed from 700 to800 ℃,the dielectric constant and energy storage performance of PSNNS films are continuously ***,with annealing temperature up to 850 ℃,their dielectric constant decreases,which might be related with the removal of interfacial defects as a function of annealing *** is one of the causes of space charge phenomenon,resulting in the increase in dielectric ***,the micro structure analysis by X-ray diffraction(XRD) and transmission electron microscope(TEM) indicates that the change of crystallization phase and interfacial polarization takes responsibility to the results.

关键词： Thin film Pulse laser deposition Annealing temperature Energy storage density

Fully Decoupled Branch Energy Balancing Control Method for Modular Multilevel Matrix Converter Based on Sequence Circulating Components

在线全文

学校读者我要写书评

暂无评论

CSEE Journal of Power and Energy Systems 2024年第1期10卷 235-247页

作者： Zexin Zhao Weijiang Chen Zhichang Yang Guoliang Zhao Bin Han Yunfei Xu Nianwen Xiang Shulai Wang China Electric Power research institute Beijing 100192China State Grid Corporation of China Beijing 100031China State Grid Smart Grid research institute Beijing 102209China State Key Laboratory of Advanced Power Transmission Technology Global Energy Interconnection Research InstituteBeijing 102211China Hefei University of Technology Hefei 230009China

The modular multilevel matrix converter(M3C)is a potential frequency converter for low-frequency AC ***,capacitor voltage control of high-voltage and largecapacity M3C is more difficult,especially for voltage balancing between *** solve this problem,this paper defines sequence circulating components and theoretically analyzes the influence mechanism of different sequence circulating components on branch capacitor voltage.A fully decoupled branch energy balancing control method based on four groups of sequence circulating components is *** method can control capacitor voltages of nine branches in horizontal,vertical and diagonal *** influences of both circulating current and voltage,a cross decoupled control is designed to improve control *** results are taken from a low-frequency transmission system based on PSCAD/EMTDC,and effectiveness and precision of the proposed branch energy balancing control method are verified in the case of nonuniform parameters and an unbalanced power system.

关键词： Branch energy balancing control decoupled control low-frequency AC transmission modular multilevel matrix converter(M3C) sequence circulating components

Combustion mechanism of benzene in iron ore sintering process:experimental and simulation

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Journal of Iron and Steel research(International) 2024年第1期31卷 195-203页

作者： Zhi-gang Que Jin-ming Shi Xian-bin Ai institute of Energy research Jiangxi Academy of ScienceNanchang330096JiangxiChina Jiangxi Carbon Neutralization research Center Nanchang330096JiangxiChina

Benzene is a typical component of volatile organic compounds(VOCs)in the iron ore sintering flue *** combustion behavior of benzene directly affects the emission of VOCs in iron ore sintering *** effects of temperature,benzene,and oxygen concentrations on the conversion ratio of benzene were investigated by experiments and numerical *** experiments were carried out in a tube reactor at temperatures of 773-1098 K,benzene concentrations of 0.01-0.03 vol.%,and oxygen concentrations of 10-21 vol.%.The numerical simulation was performed with the plug flow model in the CHEMKIN program based on a kinetic model that consists of 132 chemical species and 772 elementary step-like *** experimental results reveal that increasing the temperature and benzene concentration could signifi-cantly promote benzene *** is attributed to the increase in the reaction rates of all steps in the pathway for forming CO_(2)and H_(2)*** addition,due to the large equivalent ratio of oxygen to benzene,the conversion ratio of benzene remained constant at different oxygen *** simulation results were in good agreement with the experimental results and indicated that six elementary reactions dominated the formations of CO_(2)and H_(2)*** oxidations of C_(6)H_(5)O,CO,and C_(5)H_(4)O intermediates to CO_(2)were the limiting steps in the reaction pathways.

关键词： Benzene Volatile organic compound Iron ore sinter Combustion Simulation Temperature Oxygen