检索结果-南通市图书馆

Effect of Ti and Ta content on the oxidation resistance of Co-Ni-based superalloys

International Journal of Minerals,Metallurgy and Materials 2024年第2期31卷 351-361页

作者： Yuheng Zhang Zixin Li Yunwei Gui Huadong Fu Jianxin Xie Beijing Advanced innovation center for Materials Genome Engineering University of Science and Technology BeijingBeijing 100083China Institute of Materials Intelligent technology Liaoning Academy of MaterialsShenyang 110004China Key Laboratory for Advanced Materials Processing(MOE) University of Science and Technology BeijingBeijing 100083China Beijing Laboratory of Metallic Materials and Processing for Modern Transportation University of Science and Technology BeijingBeijing 100083China

Co-Ni-based superalloys are known for their capability to function at elevated temperatures and superior hot corrosion and thermal fatigue resistance.Therefore,these alloys show potential as crucial high-temperature structural materials for aeroengine and gas turbine hot-end components.Our previous work elucidated the influence of Ti and Ta on the high-temperature mechanical properties of alloys.However,the intricate interaction among elements considerably affects the oxidation resistance of alloys.In this paper,Co-35Ni-10Al-2W-5Cr-2Mo-1Nb-xTi-(5−x)Ta alloys(x=1,2,3,4)with varying Ti and Ta contents were designed and compounded,and their oxidation resistance was investigated at the temperature range from 800 to 1000℃.After oxidation at three test conditions,namely,800℃for 200 h,900℃for 200 h,and 1000℃for 50 h,the main structure of the oxide layer of the alloy consisted of spinel,Cr_(2)O_(3),and Al_(2)O_(3)from outside to inside.Oxides consisting of Ta,W,and Mo formed below the Cr_(2)O_(3)layer.The interaction of Ti and Ta imparted the highest oxidation resistance to 3Ti2Ta alloy.Conversely,an excessive amount of Ti or Ta resulted in an adverse effect on the oxidation resistance of the alloys.This study reports the volatilization of W and Mo oxides during the oxidation process of Co-Ni-based cast superalloys with a high Al content for the first time and explains the formation mechanism of holes in the oxide layer.The results provide a basis for gaining insights into the effects of the interaction of alloying elements on the oxidation resistance of the alloys they form.

关键词： Co-Ni-based superalloys high-temperature oxidation Ti and Ta elements formation mechanism of holes

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Tailoring the austenite characteristics via dual nanoparticles to synergistically optimize the strength-ductility in cold rolled medium Mn steel

引用

Journal of Materials science & technology 2024年第2期169卷 158-171页

作者： Qizhe Ye Haokai Dong Qinyi Guo Yishuang Yu Lijie Qiao Yu Yan Beijing Advanced innovation center for Materials Genome Engineering Corrosion and Protection CenterInstitute for Advanced Materials and TechnologyUniversity of Science and Technology BeijingBeijing 100083China School of Mechanical and Automotive Engineering South China University of TechnologyGuangzhou 510641China School of Metallurgical and Ecological Engineering University of Science and Technology BeijingBeijing 100083China School of Biomedical Engineering Shanghai Jiao Tong UniversityShanghai 200240China

In this work,we proposed a novel Cu/θdual nanoparticles strategy to tailor the austenite characteris-tics of a medium Mn steel via a tempering-annealing process to optimize the mechanical properties.We explored the effects of Cu-rich particles and cementite precipitated in the tempering process on the austenite reversion during the subsequent annealing process.Both experiments and numerical simula-tions verified that the austenite inherited from cementite had a finer size and a higher Mn enrichment compared with the austenite originating from the tempered martensite matrix.In addition,quantitative evaluations revealed that the pinning effect exerted by the Cu-rich particles could significantly hinder theα/γinterface migration and the recrystallized grain growth,thereby further refining the final mi-crostructure.With contributions from the effects of dual nanoprecipitates on the austenite reversion,the heterogeneous austenite grains inherited from varying nucleation sites ensured the sustained and gradual deformation-induced martensite and twinning formation.Therefore,the Cu-added steels subjected to a tempering-annealing process achieved synergetic enhancement of the tensile strength from 1055 MPa to 1250 MPa and elongation from 33%to 45%.This strategy may provide new guidance for the development and alloy design of high-performance medium Mn steels.

关键词： Dual nanoparticles Medium Mn steel Tempering-annealing process Austenite reversion Mechanical properties

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Stabilization Controller of An Extended Chained Nonholonomic System With Disturbance:An FAS Approach

引用

IEEE/CAA Journal of Automatica Sinica 2024年第5期11卷 1262-1273页

作者： Zhongcai Zhang Guangren Duan School of Engineering Qufu Normal UniversityRizhao 276826China center for Control science and technology Southern University of Science and TechnologyShenzhen 518055 center for Control Theory and Guidance technology Harbin Institute of TechnologyHarbin 150001China

This study examines the stabilization issue of extended chained nonholonomic systems(ECNSs)with external disturbance.Unlike the existing approaches,we transform the considered system into a fully actuated system(FAS)model,simplifying the stabilizing controller design.We implement a separate controller design and propose exponential stabilization controller and finite-time stabilization controller under finite-time disturbance observer(FTDO)for the two system inputs.In addition,we discuss the specifics of global stabilization control design.Our approach demonstrates that two system states exponentially or asymptotically converge to zero under the provided switching stabilization control strategy,while all other system states converge to zero within a finite time.

关键词： design stabilization system

来源：

维普期刊数据库

同方期刊数据库博看期刊评论

在线全文

学校读者我要写书评

暂无评论

Data-driven mapping-relationship mining between hardness and mechanical properties of dual-phase titanium alloys via random forest and statistical analysis

引用

Rare Metals 2024年第2期43卷 829-841页

作者： Hai-Chao Gong Qun-Bo Fan Hong-Mei Zhang Xing-Wang Cheng Wen-Qiang Xie Kai Chen Lin Yang Jun-Jie Zhang Bing-Qiang Wei Shun Xu School of Materials science and Engineering Beijing Institute of TechnologyBeijing100081China National Key Laboratory of science and technology on Materials Under Shock and Impact Beijing100081China Beijing Institute of technology Chongqing innovation center Chongqing401135China Department of Mechanical and Materials Engineering University of Nebraska-LincolnLincolnNE68588USA

In order to accelerate the research on the property optimization of titanium alloy based on high-throughput methods,it is necessary to reveal the relationship between hardness and other mechanical properties which is still unclear.In this work,taking Ti20C alloy as research object,almost all the microstructure of dual-phase titanium alloys were covered by traversing over 100 heat treatment schemes.Then,massive experiments including microstructure characterization and performance test were conducted,obtaining 51,590 pieces of microstructure data and 3591 pieces of mechanical property data.Subsequently,based on large-scale data-driven technology,the quantitative mapping relationship between hardness and other mechanical properties was deeply discussed.The results of random forest models showed that the correlation between hardness(H)and Charpy impact energy(A_(k))(or elongation,A)was hardly dependent on the microstructure types,while the relationship between H and tensile strength(R_(m))(or yield strength,R_(p0.2))was highly dependent on microstructure types.Specifically,combined with statistical analysis,it was found that the relationship between H and Ak(or A)were negatively linear.Interestingly,the relationship between H and strength was positively linear for equiaxed microstructure,and strength was linked to d^(−1/2)(d,equivalent circle diameter)ofα-grains in the form of classical Hall–Petch formula;but for other microstructures,the relationships were quadratic.Furthermore,the above rules were nearly the same in the rolling direction and transverse direction.Finally,a"four-quadrant partition map"between H and R_(p0.2)/R_(m) was established as a versatile material-screening tool,which can provide guidance for on-demand selection of titanium alloys.

关键词： Dual-phase titanium alloy Data-driven Hardness Mapping relationship

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

救援设备应包括便携式医疗成像系统（英文）

引用

science Bulletin 2024年第12期69卷 1819-1822页

作者： Mohamed L.Seghier Nabil Maalej Department of Biomedical Engineering Khalifa University of Science and Technology Healthcare Engineering innovation center (HEIC) Khalifa University of Science and Technology Physics Department Khalifa University of Science and Technology

In the last years, several countries have been devastated by natural disasters, resulting in thousands of casualties and injuries.Rescue missions were quick to respond to the needs of many devasted regions, providing critical interventions, life support equipment, and vital pharmaceuticals. However, rescue missions are still relying on traditional emergency equipment and tools that do not always have the capacity for critical diagnosis in disaster areas.

关键词：

来源：

同方期刊数据库评论

在线全文

同方期刊数据库

学校读者我要写书评

暂无评论

Nucleophilic amino acids as a renewable alternative to petrochemically-derived amines in glycerol epoxy resins

引用

Journal of Bioresources and Bioproducts 2024年第2期9卷 222-232页

作者： Yunyi Liang Yonghong Luo Yingji Wu Xiaona Li Quyet Van Le Jianzhang Li Changlei Xia Jiangsu Co-innovation center of Efficient Processing and Utilization of Forest Resources International Innovation Center for Forest Chemicals and MaterialsCollege of Materials Science and EngineeringNanjing Forestry UniversityNanjing 210037China Department of Materials science and Engineering Institute of Green Manufacturing TechnologyKorea UniversitySeoul 02841South Korea

The standard epoxy resin curing agents revealed are from unsustainable petroleum-based sources,which produce poisonous exhaust when cured.Amino acids,a bio-based epoxy curing agent with amino and carboxyl groups,are another potential curing agent.Water-soluble epoxy resins cured with lysine(Lys),glutamic acid(Glu),leucine(Leu),and serine(Ser)as amino acids were inves-tigated.The results showed that the water-soluble epoxy resin(glycerol epoxy resins,GER)was cured with Lys and Glu after reacting.Fourier transform infrared(FT-IR)spectroscopic analysis of the GER-Lys showed that the amino and carboxyl groups of Lys primarily reacted with the epoxy groups of GER.The elongation at break of Lys-cured GER(GER-Lys)cured at 70℃ with a molar ratio of 1꞉0.75 was 75.32%.The fact that elongations at break of GER-Lys(79.43%)were higher than those of GER-Glu(17.33%),respectively supports the decrease of crosslinking density by the amino acid-cured GER reaction.The potential of Lys and Glu alternatives for petrochemical amines is demonstrated and provides promising opportunities for industrial application.

关键词： Curing agent Amino acids Bio-based epoxy resins Lysine Glutamic acid

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Cell metabolism pathways involved in the pathophysiological changes of diabetic peripheral neuropathy

引用

Neural Regeneration Research 2024年第3期19卷 598-605页

作者： Yaowei Lv Xiangyun Yao Xiao Li Yuanming Ouyang Cunyi Fan Yun Qian Department of Orthopedics Shanghai Sixth People’s Hospital Affiliated to Shanghai Jiao Tong University School of MedicineShanghaiChina Shanghai Engineering Research center for Orthopaedic Material innovation and Tissue Regeneration ShanghaiChina Youth science and technology innovation Studio of Shanghai Jiao Tong University School of Medicine ShanghaiChina College of Fisheries and Life science Shanghai Ocean UniversityShanghaiChina

Diabetic peripheral neuropathy is a common complication of diabetes mellitus.Elucidating the pathophysiological metabolic mechanism impels the generation of ideal therapies.However,existing limited treatments for diabetic peripheral neuropathy expose the urgent need for cell metabolism research.Given the lack of comprehensive understanding of energy metabolism changes and related signaling pathways in diabetic peripheral neuropathy,it is essential to explore energy changes and metabolic changes in diabetic peripheral neuropathy to develop suitable treatment methods.This review summarizes the pathophysiological mechanism of diabetic peripheral neuropathy from the perspective of cellular metabolism and the specific interventions for different metabolic pathways to develop effective treatment methods.Various metabolic mechanisms(e.g.,polyol,hexosamine,protein kinase C pathway)are associated with diabetic peripheral neuropathy,and researchers are looking for more effective treatments through these pathways.

关键词： cell metabolism diabetic peripheral neuropathy peripheral nerve injury protein kinase C pathway reactive oxygen species.

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Corrosion Behavior of Graphene Nanosheets Reinforced Magnesium Matrix Composites in Simulated Body Fluids

引用

Acta Metallurgica Sinica(English Letters) 2024年第3期37卷 525-536页

作者： Liwen Chen Jianhui Jing Lulu Zhang Jing Li Weipeng Chen Limin Li Yuan Zhao Hua Hou Yuhong Zhao School of Materials science and Engineering Collaborative Innovation Center of Ministry of Education and Shanxi Province for High-Performance Al/Mg Alloy MaterialsNorth University of ChinaTaiyuan 030051China Shanxi Key Laboratory of Advanced Manufacturing technology School of Mechanical EngineeringNorth University of ChinaTaiyuan 030051China School of Materials science and Engineering Taiyuan University of Science and TechnologyTaiyuan 030024China Beijing Advanced innovation center for Materials Genome Engineering University of Science and Technology BeijingBeijing 100083China Institute of Materials Intelligent technology Liaoning Academy of MaterialsShenyang 110004China

Magnesium(Mg)alloy is considered as a promising biodegradable implant material but restricted to rapid degradation.Here,the new strategies based on thixomolding process had been explored to utilize the outstanding anti-permeability of graphene nanosheets(GNPs)while inhibit its galvanic corrosion with the matrix,so as to improve the corrosion resistance of composites.The agglomerate of GNPs with 0.9 wt%content is the main reason for the deterioration of corrosion performance due to the formation of micro-galvanic corrosion.The grain refinement of composites with 0.6 wt%content had positive effects on the better corrosion resistance.After process adjusting,the unique distributions of GNPs along grain boundaries play a vital role in improving the corrosion resistance.It can be ascribed to the following mechanisms:(I)The barriers can be established between the Mg matrix and corrosive medium,hence blocking the charge transfer at the interface;(II)The GNPs can effectively promote apatite deposition on the Mg matrix,leading to form dense apatite layers and prevent the further invasion of SBF;(III)The GNPs acting as reinforcements exists in the corrosion layer and apatite layer,impede the apatite layer falling off from the Mg matrix.These findings broaden the horizon for biomedical applications in Mg matrix composites to realize desired performances.

关键词： Magnesium matrix composite Graphene nanosheets Corrosion resistance

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Inhibiting plastic tensile instability of non-symmetric thin-walled shell component via increasing regional metal inflow based on heterogeneous pressure-carrying medium

引用

Chinese Journal of Aeronautics 2024年第1期37卷 391-413页

作者： Nan XIANG Yiquan SHU Pengyi WANG Menghan YANG Haoran WANG Tao HUANG Junqing GUO Fuxiao CHEN School of Materials science and Engineering Henan University of Science and TechnologyLuoyang 471023China National Key Laboratory for Precision Heat Processing of Metals School of Materials Science and EngineeringHarbin Institute of TechnologyHarbin 150001China College of Mechanical&Electrical Engineering Shaanxi University of Science&TechnologyXi’an 710021China Provincial and Ministerial Co-construction of Collaborative innovation center for Non-ferrous Metal new Materials and Advanced Processing technology Luoyang 471023China

Heterogeneous pressure-carrying medium was employed to establish a differentiated pressure field on sheet metal in flexible die forming process in this work,which aimed at matching the non-symmetric shape of target component and improving metal inflow to avoid local tensile instability.Specifically,metal inflow corresponding to the differentiated pressure field was analytically evaluated.Forming of a typical non-symmetric shell component was experimentally and numerically studied based on the proposed method.Compared with forming processes based on the uniform pressure,difference of metal inflow in two sides of the non-symmetric component increased from 2.16 mm to 3.36 mm and metal inflow in critical region increased by 11.9%when differentiated pressure field(taking heterogeneous elastomer#4–3 for example)was employed.The resultant maximum thinning ratio decreased by 4.2% and the uniformity of shell thickness increased by 16.9%.With the decrease of Shore hardness of elastomer in the formed region,stress path in the ready-to-form region transferred towards the bi-axial tension stress state,i.e.,stress ratio(a)increased.And,stress triaxiality(η)in characteristic regions were regulated appropriately,which decreased the risk of tensile instability.It was attributed to the decreased normal pressure and frictional resistance at sheet/elastomer interface in the formed region.

关键词： Aluminum alloys Finite element method Metal forming Plastic deformation Sheet metal

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Optimized the vanadium electrolyte with sulfate-phosphoric mixed acids to enhance the stable operation at high-temperature

引用

Frontiers of Chemical science and Engineering 2024年第2期18卷 13-26页

作者： Ling Ge Tao Liu Yimin Zhang Hong Liu School of Resource and Environmental Engineering Wuhan University of Science and TechnologyWuhan 430081China State Environmental Protection Key Laboratory of Mineral Metallurgical Resources Utilization and Pollution Control Wuhan University of Science and TechnologyWuhan 430081China Hubei Collaborative innovation center for High Efficient Utilization of Vanadium Resources Wuhan University of Science and TechnologyWuhan 430081China Hubei Provincial Engineering technology Research center of High Efficient Cleaning Utilization for Shale Vanadium Resource Wuhan University of Science and TechnologyWuhan 430081China School of Resource and Environmental Engineering Wuhan University of TechnologyWuhan 430070China

Herein, the influence of the concentration design and comprehensive performance of the sulfate-phosphoric mixed acid system electrolyte is investigated to realize an electrolyte that maintains high energy density and stable operation at high temperatures. Static stability tests have shown that VOPO4 precipitation occurs only with vanadium(V) electrolyte. The concentration of vanadium ion of 2.0–2.2 mol·L^(–1), phosphoric acid of 0.10–0.15 mol·L^(–1), and sulfuric acid of 2.5–3.0 mol·L^(–1) are suitable for a vanadium redox flow battery in the temperature range from –20 to 50 ℃. The equations for predicting the viscosity and conductivity of electrolytes are obtained by the response surface method. The optimized electrolyte overcomes precipitation generation. It has 2.8 times higher energy density than the non-phosphate electrolyte, and a coulomb efficiency of 94.0% at 50 ℃. The sulfate-phosphoric mixed acid system electrolyte promotes the electrode reaction process, increases the current density, and reduces the resistance. This work systematically optimizes the concentrations of composition of positive and negative vanadium electrolytes with mixed sulfate-phosphoric acid. It provides a basis for the different valence states and comprehensive properties of sulfate-phosphoric mixed acid system vanadium electrolytes under extreme environments, guiding engineering applications.

关键词： all vanadium redox flow battery mixed-acid vanadium electrolyte concentration optimization response surface methodology high-temperature stability

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

欢迎您,

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

请选择保存的检索档案：

请选择收藏分类：

通借通还

欢迎您,

建议与咨询 留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

请选择保存的检索档案： 新增检索档案 确定 取消

请选择收藏分类： 新增自定义分类 确定 取消

通借通还

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

请选择保存的检索档案：

请选择收藏分类：