检索结果-南通市图书馆

Automatic and Rapid Throughflow-Based Optimal Design Method for Multi-Stage Axial-Flow Compressors

在线全文

同方期刊数据库

学校读者我要写书评

暂无评论

Journal of Thermal Science 2025年第1期34卷 77-91页

作者： LEI Fan ZHANG Xiawen JU Yaping ZHANG Chuhua department of Fluid Machinery and Engineering School of Energy and Power EngineeringXi'an Jiaotong University production and Environmental department China Huaneng Group.Co.Ltd. State Key Laboratory for Strength and Vibration of Mechanical Structures Xi'an Jiaotong University

Throughflow design has the advantages of less time consumption and large optimization space,and thus is the corner stone of advanced design system of multi-stage axial-flow *** majority of relevant studies were limited to the throughflow inverse designs,and quite few works have been till now devoted to the throughflow optimal *** this work,an automatic and rapid throughflow-based optimal design method is proposed for axial-flow compressors in which a throughflow inverse design solver is embedded in optimal genetic algorithm to improve the design efficiency of axial-flow *** types of design parameters in the throughflow inverse design of axial-flow compressors,i.e.,swirl and shroud curve,are simultaneously used to optimize both the blade shape and flow *** proposed method is validated by the redesign optimization of the benchmark axial-flow compressor NASA Stage 35,and the CFD predictions show that the throughflow-based optimization leads to 1.18% efficiency benefit at design *** proposed method is then utilized to the two-dimensional throughflow optimal design of a large-scale 6.5-stage axial-flow industrial *** optimal design results are confirmed by CFD predictions,indicating that the proposed method can effectively improve the design adiabatic efficiency of the compressors by 1.09% within a few minutes on desk-top *** throughflow design implications are also obtained for advanced axial-flow industrial *** work could enhance the capability of throughflow design method and has engineering application value to explore the throughflow optimization space of multi-stage axial-flow compressors.

关键词： NASA

Role of copper chelating agents: between old applications and new perspectives in neuroscience

在线全文

同方期刊数据库

学校读者我要写书评

暂无评论

Neural Regeneration Research 2025年第3期20卷 751-762页

作者： Rosalba Leuci Leonardo Brunetti Vincenzo Tufarelli Marco Cerini Marco Paparella Nikola Puvača Luca Piemontese department of Pharmacy-Pharmaceutical Science University of Bari Aldo MoroBariItaly department of Precision and Regenerative Medicine and Jonian Area(DiMePRe-J) Section of Veterinary Science and Animal ProductionUniversity of Bari Aldo MoroBariItaly department of Engineering Management in Biotechnology Faculty of Economics and Engineering Management in Novi SadUniversity Business Academy in Novi SadNovi SadSerbia

The role of copper element has been an increasingly relevant topic in recent years in the fields of human and animal health, for both the study of new drugs and innovative food and feed supplements. This metal plays an important role in the central nervous system, where it is associated with glutamatergic signaling, and it is widely involved in inflammatory processes. Thus, diseases involving copper(Ⅱ) dyshomeostasis often have neurological symptoms, as exemplified by Alzheimer's and other diseases(such as Parkinson's and Wilson's diseases). Moreover, imbalanced copper ion concentrations have also been associated with diabetes and certain types of cancer, including glioma. In this paper, we propose a comprehensive overview of recent results that show the importance of these metal ions in several pathologies, mainly Alzheimer's disease, through the lens of the development and use of copper chelators as research compounds and potential therapeutics if included in multi-target hybrid drugs. Seeing how copper homeostasis is important for the well-being of animals as well as humans, we shortly describe the state of the art regarding the effects of copper and its chelators in agriculture, livestock rearing, and aquaculture, as ingredients for the formulation of feed supplements as well as to prevent the effects of pollution on animal productions.

关键词： agriculture Alzheimer's disease chelators copper feed supplements multi-target

维普期刊数据库

Atmospheric reductive catalytic fractionation of lignocellulose integrated with one-pot catalytic conversion of carbohydrate yielding valuable lignin monomers and platform chemicals from corn straw

在线全文

学校读者我要写书评

暂无评论

Green Energy & Environment 2025年第1期10卷 161-172页

作者： Meng-Ying Liu Zhe-Hui Zhang Xue-Qi Wang Qian Sun Chen Zhang Yu Li Zhuohua Sun Katalin Barta Feng Peng Tong-Qi Yuan State Key Laboratory of Efficient production of Forest Resources Beijing Forestry UniversityBeijing100083China Beijing Key Laboratory of Lignocellulosic Chemistry Beijing Forestry UniversityBeijing100083China department of Chemistry Organic and Bioorganic ChemistryUniversity of GrazHeinrichstrasse 28/II8010 GrazAustria

Developing a cost-effective and environmentally friendly process for the production of valuable chemicals from abundant herbal biomass receives great attentions in recent ***,taking advantage of the“lignin first”strategy,corn straw is converted to valuable chemicals including lignin monomers,furfural and 5-methoxymethylfurfural via a two steps *** key of this research lies in the development of a green and low-cost catalytic process utilizing magnetic Raney Ni catalyst and high boiling point ethylene *** utilization of neat ethylene glycol as the sole slovent under atmospheric conditions obviates the need for additional additives,thereby facilitating the entire process to be conducted in glass flasks and rendering it highly convenient for scaling *** the initial step,depolymerization of corn straw lignin resulted in a monomer yield of 18.1 wt%.Subsequently,in a dimethyl carbonate system,the carbohydrate component underwent complete conversion in a one-pot process,yielding furfural and 5-methoxymethylfurfural as the primary products with an impressive yield of 47.7%.

关键词： Atmospheric reductive catalytic fractionation Corn straw Ethylene glycol Raney Ni 5-Methoxymethylfurfural

Performance evaluation of minimum quantity lubrication by vege-table oil in terms of cutting force,cutting zone temperature,tool wear,job dimension and surface finish in turning AISI-1060 steel

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Journal of Zhejiang University-Science A(Applied Physics & Engineering) 2006年第11期7卷 1790-1799页

作者： KHAN M.M.A. DHAR N.R. department of industrial and production Engineering Shahajalal University of Science and Technology Sylhet 3114 Bangladesh department of industrial and production Engineering Bangladesh University of Engineering and Technology (BUET) Dhaka Bangladesh

In all machining processes, tool wear is a natural phenomenon and it leads to tool failure. The growing demands for high productivity of machining need use of high cutting velocity and feed rate. Such machining inherently produces high cutting temperature, which not only reduces tool life but also impairs the product quality. Metal cutting fluid changes the performance of machining operations because of their lubrication, cooling and chip flushing functions, but the use of cutting fluid has become more problematic in terms of both employee health and environmental pollution. The minimization of cutting fluid also leads to economical benefits by way of saving lubricant costs and workpiece/tool/machine cleaning cycle time. The concept of minimum quantity lubrication (MQL) has been suggested since a decade ago as a means of addressing the issues of environmental intru- siveness and occupational hazards associated with the airborne cutting fluid particles on factory shop floors. This paper deals with experimental investigation on the role of MQL by vegetable oil on cutting temperature, tool wear, surface roughness and dimen- sional deviation in turning AISI-1060 steel at industrial speed-feed combinations by uncoated carbide insert. The encouraging results include significant reduction in tool wear rate, dimensional inaccuracy and surface roughness by MQL mainly through reduction in the cutting zone temperature and favorable change in the chip-tool and work-tool interaction.

关键词： Minimum quantity lubrication (MQL) Cutting force Chip-tool interface temperature Tool wear Surface roughness Dimensional deviation

维普期刊数据库

Energy model based on solar potential and the production of electrical energy through living plants’photosynthesis

在线全文

学校读者我要写书评

暂无评论

Clean Energy 2024年第3期8卷 116-126页

作者： Raymond Daniel Rodriguez Martinez department of industrial production Faculty of EngineeringUniversidad Metropolitana1073 CaracasVenezuela

Developing a sustainable energy model is imperative considering the current trend towards decarbonizing sectors *** this purpose,Venezuela was used as a reference to propose an energy model focused on taking advantage of plant photosynthesis through microbial-vegetable fuel cells together with an agro-photovoltaic system to enhance energy and agricultural *** production from the cells was estimated using an average power density of 264 mW/m^(2) over 4%of the areas destined for crops in the entire Venezuelan region,obtaining an annual production of 19.889 GWh/*** contrast,the energy production of the agro-photovoltaic system was modelled using PVsyst software on 50%of the area used for the cells distributed throughout the states of Anzoátegui,Guárico,Monagas and Portuguesa according to their meteorological conditions,solar irradiation and agricultural activity,resulting in 3703417 GWh/*** resulting whole system proved to be able to cover>10 times the installed electricity generation capacity at a national level and,together with the tremendous scalability of the microbial fuel cells,it shows that Venezuela has a high potential for the production and distribution of clean energy.

关键词： ecosystems microbial fuel cell microorganisms renewable sustainability

Plant-microbial fuel cell for electrical generation through living plants: an internal resistance insight into the plant species used

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Clean Energy 2024年第5期8卷 45-53页

作者： Raymond Daniel Rodriguez Martinez department of industrial production Faculty of EngineeringUniversidad Metropolitana1073 CaracasVenezuela

Climate change is a global threat,the presence of which has encouraged the development and implementation of renewable energies,including plant–microbial fuel cells,which could generate 6629568–33147840 MWh per year due to their large-scale *** of the main challenges associated with microbial cells is internal resistance—a parameter whose magnitude is influenced by sev-eral *** the case of plant–microbial fuel cells,adding a plant positively affects the mitigation of internal ***,the species employed is expected to play an important *** the present study,the objective was to determine as a general reference the internal resistance of cells using various plant species,among which were tomato(Solanum lycopersicum),black beans(Phaseolus vulgaris),aloe vera(Aloe vera),corn(Zea mays),and moss(Dicranidae).For this purpose,an experimental procedure was carried out to compare the manual voltage measurements with a free cell concerning the voltage obtained by adding an external resistor in *** internal resistance values were determined as a function of the measured voltage,obtaining 177,179,175,324,and 233 kΩfor aloe vera,corn,tomato,black beans,and moss,*** this,it was shown that the roots of the plants represent an essen-tial addition to the internal resistance of the cell in the short *** contrast,plants with a C4 photosynthetic metabolism are more favourable,while C3 plants can also benefit from internal resistance during a more extended period of rhizodeposition.

关键词： climate change energy microorganism renewable source voltage

Designing a performance measurement system to support materials management in engineer-to-order:a case study

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Advances in Manufacturing 2015年第2期3卷 111-122页

作者： BФrge SjФbakk Ottar Baks Oksana Bondarenko Tara Kamran department of industrial Management SINTEF Technology and Society department of production and Quality Engineering Norwegian University of Science and Technology

There are many different production situations that can be employed to meet demand. In the engineer-to- order （ETO） production situation, products are manufac- tured to meet specific customer needs by unique engineering or significant customization. In such an environment, failing to supply the required materials in the right quantities and at the right time increases the risk of breaching due date agreements and thereby losing customer satisfaction. As such, materials management is one of the most important and critical processes within production planning and control in ETO. To bring attention and improvement to this area, ETO companies may benefit from a performance measurement system （PMS） that systematically monitors how well mate- rials management is carried out. The design of a company＇s PMS varies with its production situation. Within the large body of literature on performance management and mea- surement, limited literature specifically addressing perfor- mance measurement in ETO has been identified. After being approached by a Norwegian ETO company requesting a PMS for materials management, the authors therefore set out to design the PMS from scratch, using literature on ETO, materials management and performance management and measurement as a starting point. The paper presents the proposed PMS. It provides a basis for further studies on the topic, and could be used by managers in ETO companies to assess and improve their materials management practice.

关键词： Performance measurement system (PMS) Materials management Engineer-to-order (ETO)

维普期刊数据库

Surface Modification Aspects for Improving Biomedical Properties in Implants:A Review

在线全文

学校读者我要写书评

暂无评论

Acta Metallurgica Sinica(English Letters) 2024年第2期37卷 213-241页

作者： J.Sharath Kumar Rakesh Kumar Rajeev Verma industrial and production department Dr B R Ambedkar National Institute of Technology JalandharJalandharPunjab144008India

The primary focus during surgery is to ensure successful implantation by achieving long-term and stable fixation of *** surgery is now more focused on the development of novel biomaterials intended to improve implant *** obtain a better understanding of metal implants,this article investigated the causes of material failures in certain cases and analysed a few case *** interaction between the implant and bone tissue was a crucial aspect of successful implantation,and this study explored the factors influencing this interaction as well as ways to improve *** modern approaches used for modifying implant surfaces were systematically illustrated and briefly *** spray coatings were often favoured because of their wide range of coating materials,but other substantial surface modifications(such as friction stir processing and laser surface texturing)were also used for a selection of ***,implant surfaces with desirable features,such as biocompatibility,antibacterial properties,corrosion resistance,and wear resistance,were essential for optimising implant *** systematic review's main aim is to provide exhaustive reference information and a broad overview to advance the production and design of orthopaedic implants.

关键词： Biomaterials Surface treatments Thermal spray coatings Antibacterial Biocompatibility Corrosion resistance Wear resistance

State of the art in finite element approaches for milling process:a review

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Advances in Manufacturing 2023年第4期11卷 708-751页

作者： Shailendra Chauhan Rajeev Trehan Ravi Pratap Singh department of industrial and production Engineering Dr.B R Ambedkar National Institute of TechnologyJalandharPunjabIndia

Over a century,metal cutting has been observed as a vital process in the domain of *** the numerous available metal-cutting processes,milling has been considered as one of the most employable processes to machine a variety of engineering materials *** the milling process,material removal occurs when the workpiece is fed against a rotating tool with multiple cutting *** order to maximize the profitability of metal cutting operations,it is essential that the various input and output variable relationships are analyzed and *** experimental method of studying milling processes is costly and time demanding,particularly when a large variety of elements such as cutting tool shape,materials,cutting conditions,and so on,are *** to these issues,other alternatives emerged in the form of mathematical simulations that employ numerical *** finite element approaches have well-proven to be the most practical and commonly utilized numerical *** finite element model(FEM)can be used to determine the various physical interactions occurring during the machining process along with the prediction of various milling characteristics,such as cutting forces,cutting temperature,stresses,etc.,with the help of milling *** the present article,various research studies in the broad milling process domain practiced with numerous finite element approaches have been critically reviewed and *** further highlights the several experimental and finite element approaches-based research studies that attempted to analyze and optimize the overall performance of the different milling *** recent years,various investigators have explored numerous ways to enhance milling performance by probing the different factors that influence the quality *** of the studies have also been found to be focused on the economic impacts of milling and various process inputs that affect milling ***,various milli

关键词： Milling Finite element modeling(FEM) Micro milling Turn-milling